Axis Communications M3114-R M3114-R Network Camera - User Manual
Axis Communications M3114-R Manual
View all Axis Communications M3114-R manuals
Add to My Manuals
Save this manual to your list of manuals |
Axis Communications M3114-R manual content summary:
- Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 1
USER MANUAL AXIS M3114-R Network Camera - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 2
About this document This manual is intended for administrators and users of the AXIS M3114-R Network Camera, and is applicable to firmware 5.40 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 3
Options 33 Security 33 Date & Time 34 Network 35 Storage 39 Maintenance 40 Support 40 Advanced 41 Reset to Factory Default Settings 41 Troubleshooting 42 Checking the Firmware 42 Upgrading the Firmware 42 Emergency Recovery Procedure 42 Symptoms, Possible Causes and Remedial Actions 43 - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 4
screws here to mount camera to mounting surface 6 Control button 7 LED indicators 8 Network cable Connectors For technical specifications, see page 46. The Axis product is available in two variants with different connectors: Network connector - RJ-45 Ethernet connector. Supports Power over Ethernet - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 5
AXIS M3114-R Network Camera Hardware Overview Network connector - D-coded M12 connector. Supports AXIS Internet Dynamic DNS Service. See page 36. To connect, press and hold the button for about 3 seconds. • Resetting the product to factory . Flashes green/amber during firmware upgrade. Note • The - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 6
AXIS M3114-R Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product. The product can be used with most operating systems and browsers. The recommended browsers are Internet Explorer with Windows, Safari with - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 7
AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Root Password To gain access to the Axis the product must be reset to the factory default settings. See Reset to Factory Default Settings, on - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 8
AXIS M3114-R Network Camera Accessing the Product Set Power Line Frequency Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 41) or by resetting the product to factory default. Select the power line frequency (50 Hz or 60 Hz) - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 9
AXIS M3114-R Network Camera Accessing the Product The Manual Trigger button is used to trigger an action rule from the Live Click the Emulate joystick mode button and click in the image to move the camera view in the direction of the mouse pointer. Click the Center mode button and click in the - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 10
AXIS M3114-R Network Camera Accessing the Product Pan and Tilt bars - Use the arrows to pan and tilt the camera view, or click on a position on the bar to steer the camera view to that position. Zoom bar - Use the arrows to zoom in and out, or click on a position on the bar to zoom to - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 11
AXIS M3114-R Network Camera Media Streams Media Streams The Axis product provides several video stream formats. on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are: Unicast RTP RTP over RTSP RTP over RTSP over HTTP Multicast RTP - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 12
AXIS M3114-R Network Camera Media Streams The AMC Control Panel can be used to configure various video settings. Please see the AXIS Media Control User's Manual access video and images from the Axis product in the following ways: • Motion JPEG server push (if supported by the client, Firefox, for - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 13
AXIS M3114-R Network Camera Media Streams Note • = IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. 13 - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 14
AXIS M3114-R Network Camera Setting Up the Product Setting Up the Product The Axis product can be configured by online help . Basic Setup Basic Setup provides shortcuts to the settings that should be made before using the Axis product: 1. Users. See page 33. 2. TCP/IP. See page 35. 3. Date & Time. - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 15
AXIS M3114-R Network Camera Video Video It is possible to configure the following video features in your Axis product: • Video stream. See page 15. • Stream profiles. See page 16. • Camera settings. See page 17. • View area. See page 18. • Overlay image. See page 18. • Privacy mask. See page 19. - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 16
AXIS M3114-R Network Camera Video • The Live View page in Internet Explorer in be rotated. • Mirror. If required, the image can be mirrored. • Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. Alternatively, the frame rate can - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 17
AXIS M3114-R Network Camera Video • In the Live View page - select the stream profile from page, go to Setup > Live View Config. Camera Settings The Video > Camera Settings page provides access to advanced image settings for the Axis product. Image Appearance Increasing the Color level increases the - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 18
AXIS M3114-R Network Camera Video View Area A view area is a cropped part of the full sensor capture, requiring more bandwidth without adding image information. To enable a view area, go to Video > Camera Settings and select Enable View Area. To configure the view area: 1. Go to Video > View Area. - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 19
AXIS M3114-R Network Camera Video To use an overlay image, the image must first be uploaded to the Axis product: 1. Go to Video > Overlay Image. and enter the X and Y coordinates. 3. Click Save. For information about supported image formats, see the online help . Privacy Mask A privacy mask is an - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 20
AXIS M3114-R Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible to define - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 21
AXIS M3114-R Network Camera Live View Config Browser Windows Internet Explorer Other browsers using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC), on page 11. User Defined Links To display user-defined links in the Live - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 22
AXIS M3114-R Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ position: 1. Go to PTZ > Preset Positions. 2. Use the pan, tilt and zoom controls to steer the camera view to the desired position. 3. Enter a descriptive name in the Current position field. The product can be configured - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 23
AXIS M3114-R Network Camera PTZ (Pan Tilt Zoom) 3. Specify the pause length between runs. 4. Select Tour List and click Modify/Remove. For more information see the online help . Note This Axis product supports limited guard tours. The pause between successive guard tours must be set to at least 10 - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 24
AXIS M3114-R Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an alarm whenever the camera is repositioned, or should be ignored (areas outside Include windows are automatically ignored). For instructions, see Set Up Motion Detection Windows, on page 25. To control - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 25
AXIS M3114-R Network Camera Detectors Note Using the motion detection feature may decrease the product's overall performance. Set Up Motion Detection Windows To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection. 2. Select the Configure - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 26
AXIS M3114-R Network Camera Detectors Low level (0%) Recommended values Default values Even very small objects trigger motion detection. 5-15% 15% An object that appears in the window triggers motion - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 27
AXIS M3114-R Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. For information about available applications, downloads, trials and licenses, go to www.axis label and under System Options > Support > System Overview) to receive a - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 28
AXIS M3114-R Network Camera Events Events The Axis product can be configured to perform actions when see Camera Tampering, on page 24. • Hardware - Network - trigger the rule if network connection is lost or restored. • Input Signal - Manual Trigger - trigger the rule using the Manual Trigger - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 29
AXIS M3114-R Network Camera Events • Status LED - flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration. Convert Event Types to Action Rules If the Axis product is upgraded to firmware version 5.40 or later, - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 30
AXIS M3114-R Network Camera Events Recipient Email FTP HTTP Network Share TCP Use with action Send Images Send Notification Send Images Send Images Send Notification Send Images Send Notification - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 31
AXIS M3114-R Network Camera Events To use the recurrence in an Action Rule, first select Time from the Trigger drop-down list in the Action Rule Setup page and - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 32
AXIS M3114-R Network Camera Recordings Recordings The Axis product can be configured to record video continuously or previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings. To start a continuous recording, - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 33
AXIS M3114-R Network Camera are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need to log in you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 34
AXIS M3114-R Network Camera System Options IEEE 802.1X IEEE 802.1X is a standard for port-based a RADIUS server, examples of which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' implementation, the network device and the authentication server authenticate themselves with the - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 35
AXIS M3114-R Network Camera System Options If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 36. • Set manually allows you to manually assigned using ARP and Ping. For instructions, see . The ARP/Ping service is enabled by default but is - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 36
AXIS M3114-R Network Camera System Options Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered the product will stay connected to the service provided by the DHCP server. To make manual settings, select Use the following NTP server address - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 37
AXIS M3114-R Network Camera System Options HTTP The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024-65535 can be used. HTTPS The HTTPS port used by the Axis product can - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 38
Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP. Community names are used to identify groups. The Axis product can be configured to support SNMP on the System Options > Network > SNMP page. Depending on - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 39
AXIS M3114-R Network Camera System Options To use SNMP v3, HTTPS must be enabled, see HTTPS, on page 33. To enable SNMP v3, check the box and provide the initial user password. Note The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 40
the Firmware, on page 42. Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also Troubleshooting, on page 42. System Overview To get an overview of the Axis - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 41
AXIS M3114-R Network Camera System Options Parameter List - Shows the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams. Crash Report - Generates - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 42
AXIS M3114-R Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem should be to check the current firmware version. The latest version may contain a - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 43
. 5. Reinstall the product, referring to the Installation Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, Possible Causes and Remedial Actions Problems setting the IP address When using ARP/Ping Try - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 44
AXIS M3114-R Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to located the product on the network. Identify the product - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 45
AXIS M3114-R Network Camera Troubleshooting Lower frame rate than expected See Performance Considerations, on page 48. Axis reseller. Video and image problems, general Image unsatisfactory Check the video stream and camera settings under Setup > Video > Video Stream and Setup > Video > Camera - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 46
Shutter time Camera angle adjustment Video compression Resolutions Frame rate H.264 Frame rate Motion JPEG Video streaming Pan/Tilt/Zoom Image settings Security Supported protocols Specifications AXIS M3114-R: 1 MP, rugged RJ-45 connector, 2.9 mm lens AXIS M3114-R M12: 1 MP, rugged M12 connector - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 47
Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specifications available at www.axis.com Includes the ONVIF specification available at www.onvif.org Support for AXIS Video Hosting System (AVHS) with One-Click - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 48
Guide, CD with installation tools, recording software and User Manual, Windows decoder 1-user license AXIS Camera Station - Video management software for viewing and recording up to 50 cameras See www.axis.com/products/video/software/ for more software applications via partners M12 mount lenses AXIS - Axis Communications M3114-R | M3114-R Network Camera - User Manual - Page 49
User Manual AXIS M3114-R Network Camera © Axis Communications AB, 2009 - 2012 Ver. M2.2 Date: November 2012 Part No. 49433
USER MANUAL
AXIS M3114-R Network Camera