Axis Communications P1355 P1355 Network Camera - User Manual
Axis Communications P1355 Manual
View all Axis Communications P1355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Axis Communications P1355 manual content summary:
- Axis Communications P1355 | P1355 Network Camera - User Manual - Page 1
USER MANUAL AXIS P1355 Network Camera - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 2
with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals. Trademark Acknowledgments AXIS COMMUNICATIONS, AXIS, ETRAX, ARTPEC - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 3
• report problems to Axis support staff by logging in to your private support area • chat with Axis support staff (selected countries only) • visit Axis Support at www.axis.com/techsup/ Learn More! Visit Axis learning center www.axis.com/academy/ for useful trainings, webinars, tutorials and guides. - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 4
AXIS P1355 Network Camera Table of Contents Hardware Overview 6 Connectors 7 LED Indicators 8 Status Network 44 Storage 49 Ports & Devices 50 Maintenance 51 Support 51 Advanced 52 Reset to Factory Default Settings 52 Troubleshooting 54 Checking the Firmware 54 Upgrading the Firmware 54 - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 5
AXIS P1355 Network Camera Table of Contents Emergency Recovery Procedure 54 Symptoms, Possible Causes and Remedial Actions 55 Technical Specifications 58 Connectors 60 Performance Considerations 62 5 - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 6
AXIS P1355 Network Camera Hardware Overview Hardware Overview 1 23 4 9 10 11 12 1 Focus puller 2 Zoom puller 3 Internal microphone 4 LED indicator 5 SD card slot (microSD) 6 Audio in 7 Audio out 8 Network connector PoE 9 Power LED 10 Network LED 5 678 16 15 14 13 6 - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 7
AXIS P1355 Network Camera Hardware Overview 11 Control button 12 I/O terminal block 13 Product number (P/N) and Serial number (S/N) 14 RS485/422 connector 15 Power connector 16 Iris connector Connectors For technical specifications, see page 58. Network connector - RJ45 Ethernet connector. Supports - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 8
AXIS P1355 Network Camera Hardware Overview LED Indicators LED Network Status restarted if you are interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the Axis product must be connected to the network. To change the iris configuration - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 9
AXIS P1355 Network Camera Hardware Overview 2. Click Edit. 3. Select the installed iris lens from the drop-down list and click OK. Note For P-iris lenses not listed in the drop-down list, download the iris configuration file from www.axis.com To upload and use the downloaded configuration file, - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 10
Support web at www.axis.com/techsup 3. Enter your user name and password. If this is the first time the product is accessed, the root password must first be configured. For instructions, see Set the Root Password, on page 11. 4. The product's Live View page appears in your browser. Note The controls - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 11
AXIS P1355 Network Camera Accessing the Product Access from the Internet Once connected, the Axis AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup Set the Root Password To gain access to the Axis - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 12
AXIS P1355 Network Camera Accessing the Product When using 50 Hz, the maximum frame rate an action rule from the Live View page. For information about how to configure and enable the button, see Manual Trigger, on page 12. Click Snapshot to save a snapshot of the video image. Right-click the video - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 13
AXIS P1355 Network Camera Accessing the Product 3. From the Trigger drop-down list, select Input Signal. 4. From the second drop-down list, select Manual Trigger. 5. Select the desired action and configure the other settings as required. For more information about action rules, see Events, on page - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 14
AXIS P1355 Network Camera Accessing the Product PTZ Controls The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 15
AXIS P1355 Network Camera Media Streams Media Streams The Axis product provides several audio and video stream on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are: Unicast RTP RTP over RTSP RTP over RTSP over HTTP Multicast RTP This - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 16
AXIS P1355 Network Camera Media Streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User's Manual video and images from the Axis product in the following ways: • Motion JPEG server push (if supported by the client, Firefox, for - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 17
AXIS P1355 Network Camera Media Streams Note • = IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this. - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 18
AXIS P1355 Network Camera Setting Up the Product Setting Up the Product The Axis product can be configured by users same time, you can use the Focus Assistant to focus the camera; for instructions, see the Installation Guide supplied with the product. Advanced The tools on this page can be used to - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 19
AXIS P1355 Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can configure - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 20
AXIS P1355 required, the image can be mirrored. • Maximum frame rate. To avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a fixed amount. also have an adverse affect on image quality. The Axis product supports two H.264 profiles. The Main profile provides higher - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 21
AXIS P1355 Network Camera Video and Audio Stream Profiles A stream profile is a set of for the Automatic and Automatic outdoor options (in the White balance drop-down list). Select Custom to manually set a reference window for white balance in the view area. Wide Dynamic Range Wide dynamic range - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 22
AXIS P1355 Network Camera Video and Audio Exposure control - These settings is used to Gain are both set to Auto, it is possible to set the Priority between low motion blur and low noise manually and to use a different Priority in Normal Light and in Low Light. Example Consider an area where people - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 23
AXIS P1355 Network Camera Video and Audio conditions change, the iris will adjust itself area. 5. Click Save to save the settings. Note The PTZ functionality is useful during installation of the Axis product. Use a view area to crop out a specific part of the full view. Overlay Overlays are used to - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 24
AXIS P1355 Network Camera Video and Audio 1. Go to Video & Audio > Video Stream and select the Image tab. 2. To include an overlay image, select Include overlay image at the coordinates. The overlay image must first be uploaded to the Axis Save. For information about supported image formats, see the - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 25
AXIS P1355 Network Camera Video and Audio Audio Modes The Axis product supports the following audio modes: Full duplex - Simultaneous two-way audio allowing the Axis - speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 26
AXIS P1355 Network Camera Video and Audio For more information about these played when events occur or directly from the Live View page. The audio clip must first be uploaded to the Axis product or recorded by a microphone connected to the product. To add, download, modify or remove audio clips, - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 27
AXIS P1355 Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It is possible - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 28
AXIS P1355 Network Camera Live View Config Browser Windows Internet Explorer Other browsers using the AMC viewer. The recordings are saved to the location specified in the AMC Control Panel. See AXIS Media Control (AMC), on page 15. User Defined Links To display user-defined links in the Live View - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 29
AXIS P1355 Network Camera Live View Config - Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60 - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 30
AXIS P1355 Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ if a PTZ driver has been uploaded. Installing a PTZ driver This Axis product supports several PTZ devices. Please see www.axis.com for a complete list of supported devices, and to obtain the correct driver. To install a PTZ - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 31
AXIS P1355 Network Camera PTZ (Pan Tilt Zoom) To install the PTZ driver go to PTZ> the Guard Tour List and click Modify/Remove. For more information see the online help . Note This Axis product supports limited guard tours. The pause between successive guard tours must be set to at least 10 minutes. - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 32
AXIS P1355 Network Camera PTZ (Pan Tilt Zoom) Note Disabling PTZ controls will not The administrator will be removed from the queue 60 seconds after the last PTZ control command. 2. Event - The Axis product can be configured to go to a preset position when triggered by an alarm (see Events, on page - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 33
AXIS P1355 Network Camera Detectors Detectors Camera Tampering Camera Tampering can generate an an Include window that should be ignored (areas outside Include windows are automatically ignored). For instructions, see Set Up Motion Detection Windows, on page 34. To control the number of motion - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 34
AXIS P1355 Network Camera Detectors Note Using the motion detection feature may decrease the product's overall performance. Set Up Motion Detection Windows To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection. 2. Select the Configure Included - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 35
AXIS P1355 Network Camera Detectors Low level (0%) Recommended values Default values flashing light, select a low sensitivity. In other cases high sensitivity is recommended. Audio Detection The Axis product can be configured to generate an alarm when audio rises above or falls below the threshold - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 36
AXIS P1355 Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting. For - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 37
AXIS P1355 Network Camera Events Events The Axis product can be configured to perform actions when receives a signal from a connected device, see I/O Ports, on page 50. - Manual Trigger - trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View Page, on - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 38
AXIS P1355 Network Camera Events - Recurrence - trigger the rule periodically, see Recurrences, on page 40. This can for example be used to upload an image every 5 minutes. - - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 39
AXIS P1355 Network Camera Events The recording Duration of some actions can be set to include time immediately before and after the event. Select Pre-trigger time - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 40
AXIS P1355 Network Camera Events Recurrences Recurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1. Go to - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 41
AXIS P1355 Network Camera Recordings Recordings The Axis product can be configured to record video continuously or previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings. To start a continuous recording, follow - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 42
AXIS P1355 user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For list (a single entry can contain multiple IP addresses). HTTPS The Axis product supports encrypted browsing using HTTPS. This is configured on the System - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 43
AXIS P1355 Network which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' implementation, the network device and the the IEEE 802.1X protocol. Audio Support Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 44
AXIS P1355 See DNS Configuration, on page 46. • Set manually allows you to manually set date and time. If using an NTP . Network Basic TCP/IP Settings The Axis product supports IP version 4 and IP version 6. For instructions, see Assign IP Address using ARP/Ping, on page 45. The ARP/Ping service is - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 45
AXIS P1355 the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup Note • To open a command prompt in Windows, open For more information and help to find a local AVHS Service Provider go to www.axis.com/hosting AVHS is enabled by default. The settings - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 46
AXIS P1355 Network Camera System Options AXIS Internet Dynamic DNS Service AXIS Internet Dynamic DNS Service assigns a host name for easy access to the product. For more information, see www.axiscam.net To register the Axis product with AXIS Internet Dynamic DNS Service To make manual settings, select - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 47
AXIS P1355 Network Camera System Options HTTPS The HTTPS port used by the Axis product can be changed under System Options if your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router. • If you attempt to manually enter a port that is already in - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 48
Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: community is the group of devices and management station running SNMP. Community names are used to identify groups. The Axis product can be configured to support - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 49
AXIS P1355 Network Camera System Options Note The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to Factory Default Settings, on page 52. UPnPTM The Axis product includes support SD card can be manually formatted to the - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 50
AXIS P1355 Network Camera System Options 3. The card can now be removed. The SD card is managed on the System Options > Storage page. Click SD Card to open Storage Management. If the card's status shows as failed, click Check disk to see if the problem can be found and then try Repair. This option - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 51
are links to the proper Setup page. Logs & Reports The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If contacting Axis Support, please provide a valid Server Report with your query. System Log - Provides information - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 52
AXIS P1355 settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 53
AXIS P1355 Network Camera System Options 1. Disconnect power from the product. 2. Press and hold set the password and access the video stream. This information is also available from the support pages on www.axis.com/techsup 6. Refocus the product. It is also possible to reset parameters to factory - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 54
AXIS P1355 Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem this is not guaranteed by Axis Communications AB. Emergency Recovery Procedure If - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 55
AXIS P1355 Network Camera Troubleshooting arp -s temp ping -l 408 - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 56
802.1X If required, a static IP address can be assigned manually. For instructions, see the Installation and Management Software CD or the document Assign an IP Address and Access the Video Stream on Axis Support web at www.axis.com/techsup For authentication to work properly, the date and time - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 57
AXIS P1355 Network Camera Troubleshooting . Check that Enable audio support is selected under Setup > System Options > Security > Audio Support. Check that the correct , or use half-duplex mode instead. Storage and disk management problems Video cannot be recorded Check that the SD card is not write - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 58
H.264 Frame rate Motion JPEG Video streaming Pan/Tilt/Zoom Image settings Audio streaming Audio compression Audio input Audio output Specifications AXIS P1355 Progressive scan RGB CMOS 1/2.8" Varifocal 2.8 - 8 mm, F1.2, P-iris, IR corrected, CS-mount Horizontal angle of view 109°-39° Vertical angle - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 59
at www.onvif.org, as well as VAPIX® and AXIS Camera Application Platform from Axis Communications, specifications available at www.axis.com Support for AXIS Video Hosting System (AVHS) with One-Click Camera connection Support for AXIS Camera Companion (ACC) Intelligent video Video motion detection - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 60
AXIS P1355 /microSDHC/micro/SDXC slot supporting memory card up to 64 GB (card not included). Support for recording to network Guide Installation and Management Software CD Windows decoder 1-user license AXIS Camera Companion (included) AXIS Camera Station and video management software from Axis - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 61
AXIS P1355 Network Camera Technical Specifications Function Pin Notes Specifications GND 1 Ground 3.3 V DC Power 2 Can be used to power auxiliary equipment. Note: This pin can only be - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 62
AXIS P1355 Network Camera Technical Specifications RS-485/422 connector Two 2-pin terminal blocks for RS-485/RS-422 serial interface. The serial port can be configured to support: • Two-wire RS-485 half duplex • Four-wire RS-485 full duplex • Two-wire RS-422 simplex • Four-wire RS-422 full duplex - Axis Communications P1355 | P1355 Network Camera - User Manual - Page 63
User Manual AXIS P1355 Network Camera © Axis Communications AB, 2013 Ver. M1.9 Date: March 2013 Part No. 49956
USER MANUAL
AXIS P1355 Network Camera