Axis Communications P5534 P5534 - User Manual

Axis Communications P5534 Manual

Get Axis Communications P5534 PDF manuals and user guides View all Axis Communications P5534 manuals
Add to My Manuals
Save this manual to your list of manuals

Axis Communications P5534 manual content summary:

  • Axis Communications P5534 | P5534 - User Manual - Page 1
    USER MANUAL AXIS P5534 PTZ Dome Network Camera
  • Axis Communications P5534 | P5534 - User Manual - Page 2
    About this document This manual is intended for administrators and users of the AXIS P5534 Network Camera, and is applicable to firmware 5.40 and later. It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this
  • Axis Communications P5534 | P5534 - User Manual - Page 3
    AXIS P5534 PTZ Dome Network Camera Table of Contents Hardware overview 5 Connectors 5 LED indicators Ports & Devices 44 Maintenance 44 Support 45 Advanced 46 Reset to factory default settings 46 Multi-Connector Cable (sold separately 47 Troubleshooting 49 Checking the firmware 49 Upgrading
  • Axis Communications P5534 | P5534 - User Manual - Page 4
    AXIS P5534 PTZ Dome Network Camera Table of Contents Symptoms, possible causes and remedial actions 50 Technical Specifications 54 Performance considerations 56 4
  • Axis Communications P5534 | P5534 - User Manual - Page 5
    Guide. Note Before removal, the SD card should be unmounted to prevent corruption of recordings. To unmount the SD card, go to Setup > System Options > Storage > SD Card and click Unmount. Control button - The control button is used for: • Connecting to an AXIS Video Hosting System service
  • Axis Communications P5534 | P5534 - User Manual - Page 6
    AXIS P5534 PTZ Dome Network Camera Hardware overview • Connecting to AXIS Internet Dynamic DNS Service. See page 40. To connect, press power supply When connecting external equipment, a multi-connector cable (available from Axis) is required in order to maintain the product's IP rating, see Multi
  • Axis Communications P5534 | P5534 - User Manual - Page 7
    AXIS P5534 PTZ Dome Network Camera Accessing the product Accessing the product To install the Axis product, refer to the Installation Guide in Internet Explorer, allow installation of AXIS Media Control (AMC) when prompted. • QuickTimeTM is also supported for viewing H.264 streams and for audio
  • Axis Communications P5534 | P5534 - User Manual - Page 8
    (port mapping) for IPv4, on page 41. See also AXIS Internet Dynamic DNS Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com\techsup Set the root password To gain access to the Axis product, you must set the password for the default
  • Axis Communications P5534 | P5534 - User Manual - Page 9
    AXIS P5534 PTZ Dome Network Camera Accessing the product Controls on the Live View Live View Config > Action Buttons. The Fan button is activated automatically. Press this button to activate it manually. Enable or disable the Gatekeeper by selecting On or Off from the drop-down list. See page 25 for
  • Axis Communications P5534 | P5534 - User Manual - Page 10
    AXIS P5534 PTZ Dome Network Camera Accessing the product AMC Audio controls AMC audio buttons control the speakers and microphone connected to the client computer. The buttons
  • Axis Communications P5534 | P5534 - User Manual - Page 11
    AXIS P5534 PTZ Dome Network Camera Accessing the product Pan and Tilt bars - Use the arrows to pan and tilt the camera view, or click on a position
  • Axis Communications P5534 | P5534 - User Manual - Page 12
    AXIS P5534 PTZ Dome Network Camera Media streams Media streams The Axis product provides several audio and video on your viewing requirements, and on the properties of your network. The available options in AXIS Media Control are: Unicast RTP RTP over RTSP RTP over RTSP over HTTP Multicast RTP
  • Axis Communications P5534 | P5534 - User Manual - Page 13
    AXIS P5534 PTZ Dome Network Camera Media streams The AMC Control Panel can be used to configure various video and audio settings. Please see the AXIS Media Control User's Manual video and images from the Axis product in the following ways: • Motion JPEG server push (if supported by the client, Firefox
  • Axis Communications P5534 | P5534 - User Manual - Page 14
    AXIS P5534 PTZ Dome Network Camera Media streams Note • = IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this
  • Axis Communications P5534 | P5534 - User Manual - Page 15
    AXIS P5534 PTZ Dome Network Camera Setting up the product Setting up the product The Axis product can be configured online help . Basic Setup Basic Setup provides shortcuts to the settings that should be made before using the Axis product: 1. Users. See page 37. 2. TCP/IP. See page 39. 3. Date & Time.
  • Axis Communications P5534 | P5534 - User Manual - Page 16
    AXIS P5534 PTZ Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality. You
  • Axis Communications P5534 | P5534 - User Manual - Page 17
    AXIS P5534 PTZ Dome Network Camera Video and Audio • The Live View page in bandwidth; the lower the compression, the higher the image quality with higher bandwidth requirements. To avoid bandwidth problems on the network, you can limit the frame rate allowed to each viewer. The maximum frame rate
  • Axis Communications P5534 | P5534 - User Manual - Page 18
    AXIS P5534 PTZ Dome Network Camera Video and Audio Image Appearance Increasing the Color . Image settings Autofocus enabled - Automatic focusing is enabled by default. If the focus position is changed manually using the focus bar, autofocus will be disabled even if enabled here. In this case, use the
  • Axis Communications P5534 | P5534 - User Manual - Page 19
    AXIS P5534 PTZ Dome Network Camera Video and Audio Image freeze on PTZ - select the Include text check box option, and enter the overlay code in the field. See the online help for supported formats. Overlay image An overlay image can be used to provide extra information, or to mask a part of the
  • Axis Communications P5534 | P5534 - User Manual - Page 20
    AXIS P5534 PTZ Dome Network Camera Video and Audio Control viewer toolbar). In Push possible audio quality is a priority, AAC is the recommended codec to use. An AAC license is included in the Axis product. • G711 • G726 Sample rate - The number of times per second the sound is sampled. A higher
  • Axis Communications P5534 | P5534 - User Manual - Page 21
    AXIS P5534 PTZ Dome Axis product. Output gain - Control the volume (dB Full Scale) of the line audio output. If the sound is too low, choose a higher dB. If the sound is too high, choose a lower dB. Audio Clips An audio clip is a sound file that can be played either when an event occurs or manually
  • Axis Communications P5534 | P5534 - User Manual - Page 22
    AXIS P5534 PTZ Dome Network Camera Live View Config Live View Config You can customize the Live View page and alter it to suit your requirements. It
  • Axis Communications P5534 | P5534 - User Manual - Page 23
    AXIS P5534 PTZ Dome Network Camera Live View Config Browser Windows Internet Explorer the link as a web link will open the link in a new window. Output Buttons An output on the Axis product can be controlled directly from the Live View page, by enabling the display of output buttons. To display the
  • Axis Communications P5534 | P5534 - User Manual - Page 24
    AXIS P5534 PTZ Dome Network Camera Live View Config Note A multi-connector cable (available from Axis) is required when connecting external I/O devices to the Axis product. See Multi-Connector Cable (sold separately), on page 47 24
  • Axis Communications P5534 | P5534 - User Manual - Page 25
    AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset Positions A preset position is a predefined view that can be used to
  • Axis Communications P5534 | P5534 - User Manual - Page 26
    AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) To configure the Gatekeeper, follow the online instructions under PTZ > Gatekeeper. Guard help . Advanced Limits Define the pan, tilt, zoom and focus limits for the Axis product. Movements to the left and right, up and down, can be restricted to
  • Axis Communications P5534 | P5534 - User Manual - Page 27
    AXIS P5534 PTZ Dome Network Camera PTZ (Pan Tilt Zoom) When using a joystick (or This is useful then the view is zoomed in on an object. When Enable Auto-flip is selected, the Axis product will simulate continuous pan movement in the same direction, i.e. the camera will pan the full 360 degrees,
  • Axis Communications P5534 | P5534 - User Manual - Page 28
    AXIS P5534 PTZ Dome Network Camera Detectors Detectors Motion Detection Motion detection is overall performance. Set up motion detection To set up a motion detection Include Window, follow these instructions: 1. Go to Detectors > Motion Detection. 2. Select the Configure Included Windows option and
  • Axis Communications P5534 | P5534 - User Manual - Page 29
    AXIS P5534 PTZ Dome Network Camera Detectors Parameter Description High level (100%) flashing light, select a low sensitivity. In other cases high sensitivity is recommended. Audio detection The Axis product can be configured to generate an alarm when audio rises above or falls below the threshold
  • Axis Communications P5534 | P5534 - User Manual - Page 30
    axis.com/applications To upload an application, go to Applications > Overview, click Browse to locate the file and then click Upload Package. Click on the uploaded application's name to open the menu options Settings, License and About. For configuration instructions Options > Support > System
  • Axis Communications P5534 | P5534 - User Manual - Page 31
    AXIS P5534 PTZ Dome Network Camera Events Events The Axis product can be configured to perform port receives a signal from a connected device, see I/O Ports, on page 44. - Manual Trigger - trigger the rule using the Manual Trigger button in the Live View page, see Controls on the Live View page, on
  • Axis Communications P5534 | P5534 - User Manual - Page 32
    AXIS P5534 PTZ Dome Network Camera Events - Use Schedule - trigger the rule Send Notifications - send a notification message to a recipient. Convert Event Types to Action Rules If the Axis product is upgraded to firmware version 5.40 or later, it is recommended to convert Event Types to Action
  • Axis Communications P5534 | P5534 - User Manual - Page 33
    AXIS P5534 PTZ Dome Network Camera Events 8. Select Network Share from the Storage drop-down list. To add additional criteria, select the Additional conditions option and add
  • Axis Communications P5534 | P5534 - User Manual - Page 34
    AXIS P5534 PTZ Dome Network Camera Events Recurrences Recurrences are used to trigger Action Rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1.
  • Axis Communications P5534 | P5534 - User Manual - Page 35
    AXIS P5534 PTZ Dome Network Camera Recordings Recordings The Axis product can be configured to record video continuously or . To remove a recording, select the recording and click Remove. Continuous recording The Axis product can be configured to continuously save video to a storage device. See
  • Axis Communications P5534 | P5534 - User Manual - Page 36
    AXIS P5534 PTZ Dome Network Camera Recordings Note If a new stream profile is selected while a recording is ongoing, the stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings. 36
  • Axis Communications P5534 | P5534 - User Manual - Page 37
    AXIS P5534 user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For the list (a single entry can contain multiple IP addresses). HTTPS The Axis product supports encrypted browsing using HTTPS. This is configured on the System
  • Axis Communications P5534 | P5534 - User Manual - Page 38
    AXIS P5534 PTZ which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' implementation, the network device and the the IEEE 802.1X protocol. Audio Support Select Enable audio support to allow clients to retrieve audio streams from the Axis product. For information on how to con
  • Axis Communications P5534 | P5534 - User Manual - Page 39
    AXIS P5534 . • Set manually allows you to manually set date and Settings The Axis product supports IP . For instructions, see the product's Installation Guide. ARP/ Ping is enabled by default. To disable, uncheck the box under System Options > Network > TCP/IP > Basic. The ARP/Ping service
  • Axis Communications P5534 | P5534 - User Manual - Page 40
    AXIS P5534 PTZ Dome Network Camera System Options AXIS Video Hosting System (AVHS) AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live and recorded video accessible from any location. For more information and help to find a local AVHS Service make manual
  • Axis Communications P5534 | P5534 - User Manual - Page 41
    AXIS P5534 PTZ Dome Network Camera System Options Link-Local IPv4 Address Link-Local Address is enabled by default and assigns the Axis your NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router. • If you attempt to manually enter a port that is
  • Axis Communications P5534 | P5534 - User Manual - Page 42
    Options > Network > QoS. Using DSCP (Differentiated Services Codepoint) values, the Axis product can mark the following types of traffic: community is the group of devices and management station running SNMP. Community names are used to identify groups. The Axis product can be configured to support
  • Axis Communications P5534 | P5534 - User Manual - Page 43
    AXIS P5534 PTZ Dome Network Camera System Options The following traps are available: • Cold Multicast Audio to start multicast streaming without opening an RTSP session. Bonjour The Axis product includes support for Bonjour. Bonjour is enabled by default and the product is automatically detected
  • Axis Communications P5534 | P5534 - User Manual - Page 44
    AXIS P5534 PTZ Dome Network Camera System Options If the card's status shows as failed, click Check disk to see if the problem can be found and and password. 6. Click Connect. To clear all recordings and data from the Axis product's folder on the designated share, click Clear under Storage Tools. To
  • Axis Communications P5534 | P5534 - User Manual - Page 45
    AXIS P5534 PTZ Dome Network Camera System Options Click Restore to reset most settings to the product's parameters and their current settings. This may prove useful when troubleshooting or when contacting Axis Support. Connection List - Lists all clients that are currently accessing media streams.
  • Axis Communications P5534 | P5534 - User Manual - Page 46
    use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences. Axis Support does not provide assistance for problems with customized scripts. To open the Script Editor, go to System
  • Axis Communications P5534 | P5534 - User Manual - Page 47
    AXIS P5534 PTZ Dome Network Camera Multi-Connector Cable (sold separately) Multi-Connector Cable (sold separately) When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to maintain the product's IP rating. The multi-connector
  • Axis Communications P5534 | P5534 - User Manual - Page 48
    AXIS P5534 PTZ Dome Network Camera Multi-Connector Cable (sold separately) Connection diagram: 1 3.3 V max 250 mA 2 A B A I/O configured as input B I/O configured as output I/O connector DC power input AC power input 48
  • Axis Communications P5534 | P5534 - User Manual - Page 49
    AXIS P5534 PTZ Dome Network Camera Troubleshooting Troubleshooting Checking the firmware Firmware is software that determines the functionality of network devices. One of your first actions when troubleshooting a problem this is not guaranteed by Axis Communications AB. Emergency recovery procedure If
  • Axis Communications P5534 | P5534 - User Manual - Page 50
    AXIS P5534 PTZ Dome Network Camera Troubleshooting arp -s temp ping -s 408 < Guide. If the emergency recovery procedure does not get the product up and running again, contact Axis support at www.axis.com/techsup/ Symptoms, possible causes and remedial actions Problems
  • Axis Communications P5534 | P5534 - User Manual - Page 51
    AXIS P5534 PTZ Dome Network Camera Troubleshooting The product is accessible locally but not externally Router configuration To configure your router to allow incoming data traffic to the Axis product, enable the NAT-traversal feature which will attempt to automatically configure the router to allow
  • Axis Communications P5534 | P5534 - User Manual - Page 52
    AXIS P5534 PTZ Dome Network Camera Troubleshooting No images displayed on web page Problems with AXIS Media Control (Internet Explorer only) To enable the updating of video images in Internet Explorer, set the browser to allow ActiveX controls. Also, make sure that AXIS Media Control is installed
  • Axis Communications P5534 | P5534 - User Manual - Page 53
    AXIS P5534 PTZ Dome Network Camera Troubleshooting No audio Incorrect setup Check the sound card in the computer. Ensure that mute is not selected and that the volume settings are correct. No audio or very poor audio Check that Enable audio support and disk management problems Video cannot be
  • Axis Communications P5534 | P5534 - User Manual - Page 54
    Audio streaming Audio compression Audio input/output Specifications AXIS P5534 50 Hz, AXIS 5534 60 Hz Progressive scan CCD 1/3" f=4.7 - 180° Text and image overlay 3D Privacy mask Image freeze on PTZ Wide dynamic range Manual shutter time Two-wayx AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s G.711
  • Axis Communications P5534 | P5534 - User Manual - Page 55
    Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform from Axis Communications; specifications available at www.axis.com Includes the ONVIF specification available at www.onvif.org Support for AXIS Video Hosting System (AVHS) with One-Click Camera
  • Axis Communications P5534 | P5534 - User Manual - Page 56
    AXIS P5534 PTZ Dome Network Camera Technical Specifications Function/group Item Approvals , clear and smoked dome cover, Installation Guide, CD with User Manual, recording software, installation and management tools, Windows decoder 1-user license AXIS Camera Station - Video management software for
  • Axis Communications P5534 | P5534 - User Manual - Page 57
    User Manual AXIS P5534 PTZ Dome Network Camera © Axis Communications AB, 2011 Ver. M1.12 Date: December 2011 Part No. 45175
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
USER MANUAL
AXIS P5534 PTZ Dome Network Camera