Behringer UB1622FX-PRO User Manual
Behringer UB1622FX-PRO Manual
 |
View all Behringer UB1622FX-PRO manuals
Add to My Manuals
Save this manual to your list of manuals |
Behringer UB1622FX-PRO manual content summary:
- Behringer UB1622FX-PRO | User Manual - Page 1
EURORACK® UB1622FX-PRO UB1832FX-PRO UB2222FX-PRO UB2442FX-PRO User’s Manual Version 1.4 February 2006 - Behringer UB1622FX-PRO | User Manual - Page 2
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: To reduce the risk of electric shock, do not remove the - Behringer UB1622FX-PRO | User Manual - Page 3
outputs 12 5.2 Subgroup outputs 13 5.3 Inserts 13 5.4 Direct outputs (UB2442FX-PRO only 13 5.5 Voltage supply, phantom power supply and fuse 13 6. INSTALLATION 14 6.1 Rack mounting 14 6.2 Cable connections 14 6.2.1 Audio connections 14 7. SPECIFICATIONS 15 8. WARRANTY 16 Uli Behringer 3 - Behringer UB1622FX-PRO | User Manual - Page 4
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 1. INTRODUCTION fully down before you switch on the unit. Always be careful to set the appropriate volume. Congratulations! In purchasing the BEHRINGER EURORACK you have acquired a mixer whose small size belies its incredible - Behringer UB1622FX-PRO | User Manual - Page 5
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO explanations about various music industry/audio technology terminology can be found on individual product pages as well as in the glossary. + The block diagram supplied in the support area of our website (www.behringer.com). Registering - Behringer UB1622FX-PRO | User Manual - Page 6
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO The second value range (+10 to -40 dB) dry signal stays constant even when the channel fader is altered. If this were not the case, the effects signal of the channel would remain audible even when the channel fader is turned all the way - Behringer UB1622FX-PRO | User Manual - Page 7
level inputs on jacks for left and right channels. Channels 9/10 and 11/12 on the UB2442FX-PRO feature an additional XLR microphone jack with phantom power. If only the left jack (marked “L”) is used, the channel operates in mono. The stereo channels are designed to handle typical line level signals - Behringer UB1622FX-PRO | User Manual - Page 8
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO monitor power amp or active monitor speaker system. The relevant aux path should be set pre-fader. + On the UB2222FX-PRO, the channel being used as an effects return should be turned fully counterclockwise, otherwise feedback problems could - Behringer UB1622FX-PRO | User Manual - Page 9
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO Using the STEREO AUX RETURN (TO AUX SEND) control, the effect signal can now be blended into the monitor mix. You can easily use the headphones distribution amplifier BEHRINGER POWERPLAY PRO mixed with any “dry” channel signal. + When used - Behringer UB1622FX-PRO | User Manual - Page 10
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 2.3.8 CD/Tape input, CD/tape output Fig. 2.13: The FX/AUX 2 return fader of the UB1832FX-PRO MON The MON switch routes the signals appearing at the AUX RETURN 2 jacks to the monitor path, along with the monitor signals from the channels. - Behringer UB1622FX-PRO | User Manual - Page 11
sends and the stereo line inputs. On the UB2442FX-PRO all aux returns, and on the UB1832FX-PRO only aux return 2 can be routed to the solo bus. The solo bus is, as a rule, taken post-fader. + The PAN control in the channel strip offers a constant power characteristic. This means that the signal is - Behringer UB1622FX-PRO | User Manual - Page 12
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 3. GRAPHIC 9-BAND EQUALIZER (UB1832FX-PRO only) Fig. 3.1: The graphic stereo equalizer of the UB1832FX-PRO channel fader and the STEREO AUX RETURN FX control. FX OUT Mixing consoles UB2222FX-PRO and UB2442FX-PRO room outputs 24-BIT MULTI- - Behringer UB1622FX-PRO | User Manual - Page 13
record the tracks 1, 3, 5 and 7, in the second the tracks 2, 4, 6 and 8. The EURORACK UB2442FX-PRO already has subgroup outputs wired in parallel (1-5, 2-6, etc.). 5.3 Inserts Fig. 5.3: Insert points + On the UB2442FX-PRO the channel insert points are located on the control panel between the line - Behringer UB1622FX-PRO | User Manual - Page 14
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 6. INSTALLATION 6.1 Rack mounting The packaging of your mixing console contains two 19" rack mounts for installation on the side panels of the console. Before you - Behringer UB1622FX-PRO | User Manual - Page 15
fader @ -oo Main mix @ 0 dB, Channel fader @ -oo Main mix @ 0 dB, Channel fader @ 0 dB -101 dB -100 dB (UB2442FX-PRO) -93 dB -96 dB (UB1622FX-PRO) -87 dB (UB2442FX-PRO) -81 dB -83 dB (UB1622FX-PRO) -80 dB (UB2442FX-PRO) Power supply Mains voltage Power consumption Fuse Mains connection 100 to 240 - Behringer UB1622FX-PRO | User Manual - Page 16
EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO In the case that other parts are used which constitute an improvement, BEHRINGER may, by a description of the problem. BEHRINGER will then issue a compliance with the instructions given in BEHRINGER user or service manuals. s connection or
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Version 1.4
February 2006
User±s Manual
EURORACK
®
UB1622FX
-PRO
UB1832FX
-PRO
UB2222FX
-PRO
UB2442FX
-PRO