Behringer XD300 Manual

Thrash Metal Distortion Effects Pedal

Thank you for showing your confidence in us by purchasing the BEHRINGER DISTORTION-X XD300. This high-quality

effects pedal enables you to produce super thick, tube-like distortion plus endless sustain. Thanks to its

high-performance features you can achieve the typical hard rock or heavy metal distortion sounds.

1.

Controls

(1)

The

LEVEL

control adjusts the output level.

(2)

The

CONTOUR

control modifies the tone of the signal to achieve everything from traditional to

super-modern sounds. Turning it to the right will create a milder sound while turning it to the left

provides heavier and sharper sounds.

(3)

The

PUNCH

control adds aggressive mid-frequency punch to the signal for more distinctive

distortion sounds.

(4)

The

DIST(ortion)

control adjusts the amount of distortion effect.

(5)

The

ON/BATT

LED illuminates when the effect is activated. It also serves as a battery level indicator.

(6)

Use the footswitch to activate/deactivate the effect.

(7)

Use this ¼" TS

IN

connector to plug in the instrument cable.

(8)

The ¼" TS

OUT

connector sends the signal to your amp.

Use the

DC IN

connection to plug in a 9 V power supply (not included).

The

BATTERY COMPARTMENT

is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊

The XD300 has no on/off switch. As soon as you insert the plug into the IN connector,

the XD300 is on. When not in use, remove the plug from the IN connector. This extends

the life of the battery.

The

SERIAL NUMBER

is located at the underside.

(1)

(8)

(5)

(4)

(7)

(6)

(3)

(2)