Behringer XENYX 1002B User Manual

Behringer XENYX 1002B Manual

Get Behringer XENYX 1002B PDF manuals and user guides View all Behringer XENYX 1002B manuals
Add to My Manuals
Save this manual to your list of manuals

Behringer XENYX 1002B manual content summary:

  • Behringer XENYX 1002B | User Manual - Page 1
    XENYX 502/802/1002/1202 User Manual A50-57613-00003
  • Behringer XENYX 1002B | User Manual - Page 2
    XENYX 502/802/1002/1202 Important Safety Instructions operating and maintenance instructions in the accompanying literature. Please read the manual. Caution ++ To servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord
  • Behringer XENYX 1002B | User Manual - Page 3
    main section 6 2.3.1 Send/return effects path 6 2.3.2 Monitor and main mix 6 2.3.3 CD/Tape connectors 7 2.3.4 Signal assignment 7 2.3.5 Phantom power and LED displays 7 3. Installation 8 3.1 Mains connection 8 3.2 Audio connections 8 4. Specifications 9 5. Warranty 10 Uli Behringer  3
  • Behringer XENYX 1002B | User Manual - Page 4
    our XENYX 502/802/1002/1202 you have acquired a mixing console whose small size belies its incredible versatility and audio performance. The XENYX Series represents a milestone in the development of mixing console technology. With the new Xenyx microphone preamps including phantom power as
  • Behringer XENYX 1002B | User Manual - Page 5
    components. 2.1.3 FX sends, panorama and level adjustment Fig. 2.1: Connectors and controls of mic/line inputs MIC Each mono input channel offers a balanced microphone input via the XLR connector and also features switchable +48 V phantom power supply for condenser microphones. The XENYX preamps
  • Behringer XENYX 1002B | User Manual - Page 6
    is sent to the effects unit via the FX SENDouput. Use the FX SEND control of the main section to adjust the overall send level (1002 and 1202 only). 2.3.2 Monitor and main mix Fig. 2.6: The FX send/balance/level controls FX The FX sends of the stereo channels function similar to those of the mono
  • Behringer XENYX 1002B | User Manual - Page 7
    V (802/1002/1202 only) The red +48 V LED lights up when phantom power is on. The PHANTOM switch activates the phantom power supply on the XLR connectors of all mono channels. ++ Please do not connect microphones to the mixer (or the stagebox/wallbox) as long as the phantom power supply is switched
  • Behringer XENYX 1002B | User Manual - Page 8
    the balanced inputs/outputs. To do this, use either mono plugs or stereo plugs with the ring and sleeve bridged (pins 1 and 3 in the case of XLR connectors). ++ Caution! Never use unbalanced XLR connectors (PIN 1 and 3 connected) on the MIC input connectors when using the phantom power supply. Fig
  • Behringer XENYX 1002B | User Manual - Page 9
    dB / -98 dB A-weighted Main mix @ 0 dB, channel fader @ 0 dB -84 dB / -87 dB A-weighted XENYX 502/802/1002/1202 Power supply 502 Power consumption 13 W Mains voltage USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX3UL Europe/U.K./Australia, 230 V~, 50 Hz BEHRINGER PSU MX3EU China, 220 V~, 50 Hz
  • Behringer XENYX 1002B | User Manual - Page 10
    XENYX 502/802/1002/1202 5. Warranty § 1 Other warranty rights and national law 1. This warranty in compliance with the instructions given in BEHRINGER user or service manuals. == connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable
  • Behringer XENYX 1002B | User Manual - Page 11
    BEHRINGER USA, Inc. 18912 North Creek Parkway, Suite 200 Bothell, WA 98011, USA Phone: +1 425 672 0816, Fax: +1 425 673 7647 hereby declares that the product(s) XENYX 502 XENYX 802 XENYX 1002 XENYX radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
XENYX
502/802/1002/1202
User Manual
A50-57613-00003