Beko WMI61241 User Manual
Beko WMI61241 Manual
 |
View all Beko WMI61241 manuals
Add to My Manuals
Save this manual to your list of manuals |
Beko WMI61241 manual content summary:
- Beko WMI61241 | User Manual - Page 1
Automatic Fully Integrated Washing Machine WMI 61241 - Beko WMI61241 | User Manual - Page 2
manual will... ...help you use your machine in a fast and safe way. • Please read the Operation Manual before installing and starting your machine. • Particularly follow the instructions related to safety. • Keep this Operating Manual your part to protect the environment. 2820521641_EN/220910.1110 - Beko WMI61241 | User Manual - Page 3
Drawer 26 The loading door and the drum 26 Body and control panel 26 Inlet water filters 26 Draining any remaining water and cleaning the pump filter 27 8 Solution suggestions for problems 29 9 Guarantee 35 10 Service 36 5 Selecting a Program and Operating Your Machine 11 BUILT - Beko WMI61241 | User Manual - Page 4
1 Your Washing Machine Overview 1 2 3 4 5 6 1 - Detergent Drawer 2 - Door 3 - Top Lid 4 - Control Panel 5 - Filter Cap 6 - Height-adjustable feet 4 EN - Beko WMI61241 | User Manual - Page 5
(W) Spinning cycle (rpm max.) WMI61241 6.5 84 60 54 71 230 V / 50Hz 10 2200 1200 Specifications of this appliance may change without notice to improve the quality of the product. Figures in this manual are schematic and may not match your product exactly. Values stated on the machine - Beko WMI61241 | User Manual - Page 6
electrical parts to overheat. This may cause problems with your washing machine. • If the power cable or mains plug is damaged you must call Authorised Service for repair. • Check water hoses for wear. Do not use old/used water inlet hoses. These may cause stains on your laundry. • Fit the drain - Beko WMI61241 | User Manual - Page 7
in an undamaged state. • Fit the draining hose to a washbasin or waste system securely before starting up your machine. There may be a risk of being scalded due to high washing temperatures! • Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be - Beko WMI61241 | User Manual - Page 8
used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any - Beko WMI61241 | User Manual - Page 9
C Transportation safety bolts must be removed before operating the washing machine! Otherwise, the machine will be damaged! 1. Loosen all call Beko Spare Part Department. (0845 6004911) and see built-in installation section. Gap 3. Fit the covers (supplied in the bag with the Operation Manual) into - Beko WMI61241 | User Manual - Page 10
. Turn off the tap and remove the nut in case of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use. • Models with a single water inlet should not be connected - Beko WMI61241 | User Manual - Page 11
hose Before disposing of your old washing must not be longer than 3.2 m after machine, cut off the mains plug and make coming out of the machine. To avoid the door lock unusable. water leakage failures, the connection between the extension hose and the drain hose of the product must be fitted - Beko WMI61241 | User Manual - Page 12
Dry on a hanger • Use only dyes/colour changers and lime removers suitable for machine wash. Always follow the instructions on the packaging. • Wash trousers and delicate clothes turned inside out. Hang without Can be ironed Can be spinning with hot iron ironed with warm iron Do not iron - Beko WMI61241 | User Manual - Page 13
for powder detergent, powder stain remover or liquid bleach - liquid bleach must be added either during the pre-wash or during the first rinsing step of the washing Programme). Liquid bleach must be added manually while the machine takes in water. 4) Right compartment with " " symbol (liquid - Beko WMI61241 | User Manual - Page 14
machine takes in water allows it to be diluted before it is poured onto the laundry. You must select extra rinsing option if you use liquid bleach in a washing Programme. Bleach must be removed from the laundry with rinsing; otherwise it may cause itching on the skin. C Read the dosage instructions - Beko WMI61241 | User Manual - Page 15
it must be added from the compartment number "II" right after the detergent foams with water. Eliminating lime formation • When required, use only appropriate lime removers developed specifically for washing machines and always follow the instructions on the package. 15 EN - Beko WMI61241 | User Manual - Page 16
5 Selecting a Program and Operating Your Machine Control panel 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 - Spin Speed Adjustment Button Display Temperature Adjustment Button Program Selection Knob On/Off Button Time Delaying Button (+/-) Auxiliary Function Buttons Start/Pause/Cancel Button 16 EN - Beko WMI61241 | User Manual - Page 17
Spin Symbol b - Spin Speed Indicator c - Water cut-off symbol (According to your machine's model) d - Economy Symbol e - Temperature Indicator f - Temperature Symbol g - Door programs comprise of a complete washing process, including washing, rinsing and, if required, spin cycles. A When selecting - Beko WMI61241 | User Manual - Page 18
before starting the program. For more effective cleaning, you can run the program by adding powder lime remover for washing machines into compartment II of the detergent drawer. After the program is completed, leave the door ajar to allow the inside of the machine get dry. C This is not a program - Beko WMI61241 | User Manual - Page 19
rinse hold function: - Adjust the spin speed. - Press "Start/Pause/Cancel" button. Program resumes. Your machine drains the water and spins your laundry. You can use no spin function in order to drain the water without spinning at the end of the program. Spin Speed selection Whenever a new program - Beko WMI61241 | User Manual - Page 20
56 0.30 Hand Wash 30 1 40 0.25 Dark Care 40 3 82 0.55 Self Clean 70 - 100 spin speed of your machine is lower, selection may be made until maximum spin speed. - : See program description for maximum load. The auxiliary functions in the table vary according to the model of your machine. CC Water - Beko WMI61241 | User Manual - Page 21
if you want to drain the water without spinning. Program resumes. Your machine drains the water and program completes. If you want to spin your laundry that you left in water: - Adjust the spin speed. - Press Start/Pause button Program resumes. Your machine drains the water, spins the laundry and - Beko WMI61241 | User Manual - Page 22
up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill detergent drawer. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press "Time delaying" buttons "+" and "-" to set your - Beko WMI61241 | User Manual - Page 23
of laundry in the machine. Changing the selections after the program has started The selected spin speed and program temperature screen. Adding/removing laundry in pause mode The door can be opened if the water level is suitable. The door locked symbol will light up until the door is suitable - Beko WMI61241 | User Manual - Page 24
out and Start Symbol lights up. If you want to discharge the water only without spinning: Press "Start/Pause/Cancel" button. The Standby symbol will fade. The Start symbol will light up. The program continues and only drains the water. End of program When the program is finished, the symbols of the - Beko WMI61241 | User Manual - Page 25
, C You may add or remove laundry during the time delay (until the Programme starts). At the beginning of a washing cycle (machine allows adding more laundry during a future step only if the water level is low enough to open the loading door or if the temperature in the machine is low). In order to - Beko WMI61241 | User Manual - Page 26
cloth. • Use only a soft and damp cloth to clean the control panel. A Never use a sponge or scrubbing material. These will damage the painted and plastic parts. Inlet water filters There is a filter at the end of each water intake valve at the back side of the machine and also at the end of each - Beko WMI61241 | User Manual - Page 27
washing water. Thus, a good water discharge is achieved and the pump life is extended. • If your machine fails to drain the water, the pump filter may be clogged. You may have to clean it every 2 years or whenever it is plugged. Water must be drained off to clean the pump filter. In addition, water - Beko WMI61241 | User Manual - Page 28
into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water. • When there is no water left, turn the pump filter until it is completely loose and remove it. • Clean any residues inside the filter as well as fibers, if any, around the propeller - Beko WMI61241 | User Manual - Page 29
voltage. the normal level. The water being taken in is directly discharged. Improper position of the drain hose. Connect the water draining hose as described in the operation manual. No water can be seen in the machine during washing. This is not a problem. The water level is not visible from - Beko WMI61241 | User Manual - Page 30
Laundry should be rearranged and re-spun. - No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment. Washing time takes longer than the time specified in the manual - Water pressure may be low. - Supply voltage may - Beko WMI61241 | User Manual - Page 31
Laundry should be rearranged and re-spun. - No spinning is performed when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its environment. - Check the filter. - Check the drain hose. Washing performance is poor: Laundry turns grey - Using insufficient - Beko WMI61241 | User Manual - Page 32
the water hardness. - If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. - Do not mix the softener with detergent when putting in the compartment. - Wash and clean the drawer with hot water. 32 - Beko WMI61241 | User Manual - Page 33
although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Do not mix the softener with detergent when putting in the compartment. Wash and clean the drawer with hot water. Detergent residue in the dispensing drawer. - Detergent may have been put in - Beko WMI61241 | User Manual - Page 34
program was selected and the «Start/Pause/Cancel» button was pressed. The front door may be ajar. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the model of your machine, water cut-off symbol may light up too) Water may have been cut off. You can restart your - Beko WMI61241 | User Manual - Page 35
qualified Electrical Domestic Appliance Installer is recommended for all Washing Machines, Dishwashers and Electric Cookers • Gas Cookers must service please contact the Beko Customer Help-Line. Tel: 0845 600 4911 e-mail:[email protected] Important notes. • Your Beko product is designed and built - Beko WMI61241 | User Manual - Page 36
& Dishwashers 0845 600 4906 Republic of Ireland All Refrigeration, 01 862 3411 All Cookers Washing Machines & Dishwashers Before requesting service please check the trouble-shooting guide in the Operating Instructions as a charge may be levied where no fault is found even though your product may - Beko WMI61241 | User Manual - Page 37
BUILT-IN INSTALLATION GUIDE 11 BUILT-IN INSTALLATION 540,8 mm 590,7 mm 820 mm 810,6 mm 600 mm 580 mm 10,4 mm 150,3 mm 51 mm - Beko WMI61241 | User Manual - Page 38
- Beko WMI61241 | User Manual - Page 39
338 mm 26mm 190 mm 26mm 590 mm / 595 mm 573.5 mm 21mm 36 mm 338 mm 190 mm 338 681 mm mm 36 mm 172 mm 534.5 mm - Beko WMI61241 | User Manual - Page 40
172 mm 681 mm 338 mm 36 mm 534.5 mm 190 mm 36 mm 338 mm 590 mm / 595 mm 573.5 mm 21 mm 190 mm 338 mm 26 mm 26 mm - Beko WMI61241 | User Manual - Page 41
IF THE CABINET DOOR OPENS TO RIGHT Use 35mm hinge cutting tool IF THE CABINET DOOR OPENS TO LEFT - Beko WMI61241 | User Manual - Page 42
- Beko WMI61241 | User Manual - Page 43
1 3 2 4 - Beko WMI61241 | User Manual - Page 44
- Beko WMI61241 | User Manual - Page 45
±2mm ±2mm ±2mm ±2mm - Beko WMI61241 | User Manual - Page 46
820mm To increase height of product order optional part no: 1493 - Beko WMI61241 | User Manual - Page 47
- Beko WMI61241 | User Manual - Page 48
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
 |
 |
WMI 61241
Automatic
Fully Integrated
Washing Machine