Beltronics RX45 Installation Manual

Important Notes

Beltronics RX45 Comes Complete



Read This First

Please read both sides of these

instructions before starting your

installation.

For the easiest trouble-free

installation, install the Interface

first, and wire it to a 12-volt

switched circuit.

Then before installing the other

components, plug all of them into

the Interface and power up the

unit to confirm proper operation.

To get the best possible

performance, installation of the

Radar/Laser receiver is critical.

Although radar signals will pass

through some materials, including

plastic, laser signals will not. For

this reason the receiver must have

a clear view of the road in order to

work properly.

Performance

Warning

1

Installation of this system

requires some experience and

expertise in automotive

electronics. Car Audio specialists

and many new car dealers can

install this for you.

2

If you choose to install it

yourself without expertise in

automotive electronics, please

note that it can cause personal

injury or damage to your vehicle.

3

If your vehicle is damaged

during installation, its safety

systems may be compromised and

could cause personal injury or

property damage.

4

Improper installation may also

void RX45’s warranty.

12-volt installation

experience is

suggested

Front Radar/Laser Receiver

• Miniature weather-proof Radar/Laser

Receiver

• Universal mounting bracket with

stainless steel hardware

• Built-in 16 foot shielded cable with

water proof connector

• 12 nylon wire ties to secure cable

Miniature Display Controller

• Display Controller mounts easily to

instrument pod, dashboard or console

• Optional hidden display included

Interface

• Central module connects to switched

12-volt power and ground

• All components plug directly in using

modular connections

• 3M connector taps into existing

vehicle wiring

Documentation

• Comprehensive Owner’s Manual

• Installation Manual

Built-in Diagnostics

• Confirms all components are

operational

• Fully compatible with Laser Shifters

Beltronics

5442 West Chester Road

West Chester OH 45069

Service 800.341.2288

www.beltronics.com

©2010 Beltronics. Beltronics, RX45, SmartShield, AutoScan, ThreatDisplay and TechDisplay are trademarks of Beltronics USA, Inc. SWS is a trademark of SWS, L.C.

Manufactured and Printed in Canada. Features, specifications and prices subject to change without notice.

NOTE: INSTALL THE RECEIVER

HORIZONTALLY AND LEVEL,

WITH A CLEAR VIEW OF THE

ROAD.