BenQ BenQ MP780ST Interactive Short-Throw 3D Projector MX750 User Manual
BenQ BenQ MP780ST Interactive Short-Throw 3D Projector Manual
View all BenQ BenQ MP780ST Interactive Short-Throw 3D Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ BenQ MP780ST Interactive Short-Throw 3D Projector manual content summary:
- BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 1
MX750/MP780 ST Digital Projector User Manual Welcome - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 2
Table of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 71 Maintenance 84 Care of the projector 84 Lamp information 85 Troubleshooting 91 Specifications 92 Dimensions 93 Ceiling mount installation 93 Timing chart - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 3
that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you operate your protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service personnel. 6. Do not block the projection lens with - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 4
Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the on rare death if you should come into occasions. contact with live parts. The only user serviceable part is the lamp which has its own removable cover. Under no circumstances should you ever undo - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 5
Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. above 40°C / 104°F - Locations where the altitudes are higher than 3000 m (10000 feet). 3000 m (10000 feet) 0 m (0 feet) Important safety instructions 5 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 6
Safety Instructions (Continued) 16. Do not stand the projector on end 18. Do not does become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 17. Do not step on the projector or place any objects upon it. Besides probable physical damage to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 7
(maximum 1PC/ NB can display to 8 projectors at the same time) • USB display supports computer connection via USB mini-B type to A type cable • USB Reader supports USB flash drive or HDD display • 3D Ready supported • Variable audio output • Microphone input with big speakers (10W x2) can save extra - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 8
consult your dealer for detailed information. MX750 projector MP780 ST projector Remote control with batteries Power cord VGA cable Quick start guide MP780 ST only User manual CD Warranty card* PointDrawTM pen 8 Introduction USB mini-B type to A USB B type to A type type cable cable - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 9
USB power adapter PointDrawTM pen PointDrawTM pen wrist holder strap PointDrawTM pen quick start guide Q Draw interactive software Optional accessories 1. Spare lamp kit 2. Ceiling mount kit 3. Soft carry case (standard accessory for MX750) 4. RS232 cable 5. BenQ wireless dongle 6. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 10
Projector exterior view Front/upper side (MX750) 1 2 3 4 5 (MP780 ST) 1 2 4 5 Rear/lower side 11 12 13 14 15 16 17 18 19 20 21 1. External control panel (See "Projector" on page 11 for details.) 2. Lamp cover 3. Focus ring (MX750) Focus slide lever (MP780 ST) 4. Projection lens 5. Lens cover 6 6. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 11
menu settings. 2. Keystone/Arrow keys ( / Up, / 9. Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 90 for details. SOURCE Displays the source - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 12
Mounting the projector We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling or wall, we strongly recommend that you use a - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 13
15. Used to hide the screen picture. See "Hiding the image" on page 44 for details. 16. 6. Keystone/Arrow keys ( / Up, / 17. Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details. MODE/ENTER Selects an available picture - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 14
18. AUTO 23. ASPECT Automatically determines the best picture Selects the display aspect ratio. See timings for the displayed image. See "Selecting the aspect ratio" on page 37 for "Auto-adjusting the image" on page 31 for details. details. 24. MIC/VOL 19. Right/ Adjusts the microphone's - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 15
. • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 16
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 17
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. The projector should always be placed horizontally level (like flat on a table), and positioned directly - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 18
How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table on page 19-20 and find the closest match to your screen size in the left columns labelled "Screen size". Using this value, look across this row to the right to find the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 19
MX750 Projection dimensions Refer to "Dimensions" on page 93 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance Screen size Distance from screen (mm) Diagonal W H - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 20
MP780 ST Projection dimensions Refer to "Dimensions" on page 93 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance Screen size Diagonal WH Inch mm (mm) (mm) 30 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 21
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 22
Computer system requirements for USB display:: Operation System Requirements Windows XP Windows Vista Minimum Hardware Requirements Supports USB 2.0 CPU: Pentium 1G RAM: 512MB RAM Disk: 20MB hard driver space Computer system requirements for WiFi display:: Operation System Requirements Windows - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 23
Connecting a computer or monitor Connecting a computer The projector can connect to both IBM® compatibles and Macintosh® computers. A Mac adapter is needed if you are connecting legacy version Macintosh computers. To connect the projector to a notebook or desktop computer (using VGA): 1. Take the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 24
a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination. • Transmission speed and image quality will vary according to the bandwidth of - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 25
well as on the screen, you can connect the MONITOR OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 23. 2. Take a suitable VGA - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 26
Connecting Video source devices You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 27
it to an HDMI source device like a DVD player, a DTV tuner, a display or a notebook computer. HDMI (High-Definition Multimedia Interface) supports uncompressed video data transmission between compatible devices like DTV tuners, DVD players and displays over a single cable. It provides pure digital - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 28
Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output jacks available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 29
Connecting an S-Video/composite source device Examine your Video source device to determine if it has an unused S-Video/composite output jack available: • If it has both jacks, use the S-Video output jack for connection as the S-Video terminal provides better picture quality than the Video terminal. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 30
90 seconds before energizing the lamp. 4. If the projector is activated for the first time, select your OSD language following the onscreen instructions. 5. If you are prompted for a password, press the arrow keys to enter a six digit password. See "Utilizing the password function" on page - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 31
You can also press SOURCE on the projector or remote control to select your desired input signal. See "Switching input signal" on page 36 for details. If the frequency/resolution of the input signal exceeds the projector's operating range, you will see the message 'Out of Range' displayed on a - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 32
when the projector is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 33
Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. Main menu icon Main menu Highlight Sub-menu Current input signal Status Press MENU/EXIT to the previous page or to exit. The following - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 34
display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 6. To leave the OSD menu, press MENU/EXIT. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 35
number and turn off your projector. 3. Seek help from the local BenQ service center to decode the number. You may be required to provide proof of display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 36
On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or remote control. A source selection bar displays. #-"/, 2. Press / until your desired - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 37
This function is only available when the HDMI input port is in use. Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control 1. Press ZOOM+/ZOOM- to display - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 38
• Using the remote control 1. Press ASPECT to show the current setting. 2. Press ASPECT repeatedly to select an aspect ratio to suit the format of the video signal and your display requirements. • Using the OSD menu 1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted. 2. Press - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 39
most suitable for images which are already in a 16:10 aspect, like high definition TV, as it displays them with out aspect alteration. Optimizing the image Selecting a picture mode The projector is preset with several predefined picture modes so that you can choose one to suit your operating - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 40
7. When all settings have been done, highlight Save Settings and press MODE/ENTER to store the settings. 8. The confirmation message 'Setting Saved' displays. Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 41
The options available for color temperature* settings vary according to the signal type selected. 1. T1: With the highest color temperature, T1 makes the image appear the most bluish white than other settings. 2. T2: Makes images appear bluish white. 3. T3: Maintains normal colorings for white. 4. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 42
Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected RED Yellow GREEN picture will be selected. Increasing its range will include red close to yellow and red close to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 43
Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Follow these steps to utilize this function: 1. Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press MODE/ ENTER - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 44
still hear the audio even though the image is frozen on screen. Utilizing FAQ function The INFORMATION menu contains possible solutions to problems encountered by users regarding image quality, installation, special feature operation and service information. To get the FAQ information: 44 Operation - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 45
the INFORMATION menu. 2. Press to highlight FAQ-Image and Installation or FAQ-Features and Service based #-"/, #-"/, on the information you want to know. 3. Press MODE/ENTER. 4. Press / to select a problem and press MODE/ENTER for possible solutions. 5. Press MENU/EXIT to exit the OSD. Locking - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 46
If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 47
Personalizing the projector menu display The On-Screen Display (OSD) menus can be set according to your preferences. The following settings do not affect the projection settings, operation, or performance. • Menu display time in the SYSTEM SETUP: Basic > Menu Settings menu sets the length of time - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 48
address bar of your browser and press Enter. For example: http://10.60.7.31 2. The BenQ remote network operation page opens. • The web page control supports IE version 7.0 or higher. 48 Operation - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 49
• The illustrations in web page control, Q Presenter and USB Reader sections are for the purpose of explanation and may differ from the actual design of your projector. 3. Click Download to save Q Presenter software on your computer. You can also link to the web page control from Q Presenter > - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 50
i. These buttons function the same as the ones on the remote control. See "Remote control" on page 13 for details. The Display Setting page allows you to operate the projector as if you were using the OSD menus. These functions are some useful menu settings. The Picture Setting page allows you to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 51
The Information page displays the information and status of this projector. The Conference Control page allows you to control computer's display status of all the computers linked to this projector. Operation 51 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 52
The Crestron page is only available when you are on a Wired LAN network. It also allows you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. i i ii i iii i. These buttons function the same as the ones on the OSD menus or remote control. See "2. PICTURE" on page 71 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 53
The tools page allows you to manage the projector, configure the LAN control settings and secure access of remote network operation on this projector. i iii ii iv v i. You can name the projector, keep track of its location and the person in charge of it. ii. You can adjust the Wired LAN - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 54
The info page displays the information and status of this projector. i i. Press exit to go back to the Crestron remote network operation page. The Admin page allows you to enter Basic, Wired LAN, Wireless LAN and Mail pages once the password is entered. The default password is "0000". If you want to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 55
The Basic page allows you to change the password and select connected persons. The number of connected persons may affect the network display performance. The Wired LAN page allows you to adjust the Wired LAN settings. Operation 55 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 56
The Wireless LAN page allows you to adjust the Wirless LAN settings. Max. length for SSID string is 16 bytes. Please use a different SSID when more than two projectors are connecting through wireless LAN. The Mail page allows you to send alert e-mail to your ITS administrator. You can first try the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 57
Displaying image through Q Presenter The Q Presenter is an application running on the host PC. It connects to an available network display and transfers the desktop contents to the network display via local network connection. Be sure to turn off other virtual network control programs before using Q - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 58
ii. Projectors linked in the LAN will be found. Then select the projector you want to link. iii. Click "Connect". Then you should be able to see the image on projector. iv. You can click to disconnect all connected projectors.. The Special Feature page allows you to have some advanced functions to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 59
ii. You can select to stop/start displaying desktop contents to connected network display. iii. 4-1 Display (up to 4 computers can shoot to 1 projector at the same time). Click the location you want to display. 4locations can be chosen (1-4) or 2 places (L and R) if it's 2 computers. Once you click - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 60
vii viii ix x xi vii. You can select Video or Graphic display mode. Graphic Mode: worse image quality but faster tramsmission speed. Video Mode: better image quality but slower transmission speed. However, the actual transmission performance was determined by the status of network usage at that time - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 61
images files in JPEG, GIF, TIFF, PNG and BMP formats. • A square box will display on the filename for unidentified characters. • Thai filename is not supported. • Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than WXGA (1280 x 800) only. • If a folder consists - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 62
ii. Selected folder iii. Supported file format iv. Unsupported file format To open folder scroll through thumbnails return to a previous page exit USB Reader change to a different page go back - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 63
rotate the image by 90 degree clockwise/ counterclockwise return to a previous page start/stop slideshow Settings page: / (Rotation is temporary; the image returns to its original orientation when you go back to thumbnails) Auto Enter i ii iii iv i. You can adjust order settings. ii. You can - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 64
Remote Desktop Control through Q Presenter The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from projector site. 1. Setup the RDC login account (User name and Password ) in Q Presenter. • Name: must be 8 English capital letters A~Z and number 0 ~9. • Password: must be 6 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 65
/ENTER to connect the selected PC. 7. Connect USB keyboard or mouse to control the host PC's desktop through the projector. • Remote Desktop Control does not support PC Standby mode. • Remote Desktop Control only supports LAN source so the projector source is fixed on LAN. Operation 65 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 66
the pen's battery is charging. • Do not disassemble the PointDrawTM pen yourself. Refer all servicing to qualified service personnel. • The lithium battery is only rechargeable, and not user replaceable. Not user serviceable. 2. Connect the projector and your computer with the supplied USB B type to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 67
How to hold the PointDrawTM pen You can hold the PointDrawTM the way you would hold a normal pencil or pen, or you can hold it like a remote control - use in whichever position is most comfortable. or If the PointDrawTM pen is far away from the screen, be sure to press the left mouse button to - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 68
attempt to link to projector Solid: working status Sensor Projector's power button Troubleshooting • If the pen doesn't work at all, or it works pen has the gap problem between the tip and the cursor on your Apple computers, install the scaling fix that came with the user manual CD-ROM: i. Mount - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 69
ii. If you don't see the file on the "ScalingFix" volume, you may need to double-click the disk image icon on the desktop. iii. Double-click "PointDraw Scaling Fix". The installer should run, follow the prompts. iv. Right-click on the "ScalingFix" disk image icon on the desktop, and choose "Eject" - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 70
• Actual lamp lives may vary due to different environmental conditions and usage. 70 Operation - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 71
Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Wall Color Off/Light Yellow/Pink/Light Green/Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Auto Keystone On/Off 1. DISPLAY Keystone - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 72
Presentation Timer Timer period 1~240 minutes Timer display Always/Last 1 Min/Last 2 Min/ Last 3 Min/Never Timer position Top-Left/Bottom-Left/TopRight/Bottom-Right Timer counting direction Count Down/Count Up Sound Reminder On/Off On/Off Language 4. SYSTEM SETUP: Basic Projector - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 73
5. SYSTEM SETUP: Advanced Quick Cooling On/Off High Altitude Mode On/Off Mute On/Off Volume Audio Settings Microphone Volume Power on/off Ring Tone On/Off Lamp Mode Normal/Economic Lamp Settings Reset lamp timer Equivalent lamp hour Security Settings Change password Change Security - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 74
FAQ-Image and Installation FAQ-Features and Service 6. INFORMATI ON Current System Status • Source • Picture Mode • Resolution • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 75
1. DISPLAY menu Description of each menu • The default values listed in this manual, especially on pages 75-83, are for reference only. They may vary between the projectors due to the continuous improvement to the products. FUNCTION DESCRIPTION - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 76
the input signal is PC@120Hz, 60Hz@Video and S-video. When you discover the inversion of the image depth, enable this function to correct the problem. This function is only enabled when the input signal is PC@120Hz, Video and S-video. 76 Operation - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 77
2. PICTURE menu FUNCTION) DESCRIPTION Picture Mode Reference Mode Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 39 for details. Selects a picture mode that best suits your need for the image - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 78
2. PICTURE menu FUNCTION DESCRIPTION Adjusts white peaking while maintaining correct color presentation. Brilliant Color See "Adjusting Brilliant Color" on page 40 for details. This function is only available when User 1/2 is selected. Color See "Selecting a Color Temperature" on page 40 for - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 79
4. SYSTEM SETUP: Basic menu FUNCTION Presentation Timer Language Projector Position Menu Settings Operation Settings DESCRIPTION Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 43 for details. Timer period Sets a preferred - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 80
4. SYSTEM SETUP: Basic menu FUNCTION Remote Receiver Panel Key Lock Background Color Splash Screen MyScreen PointDrawTM DESCRIPTION Sets which IR remote sensor of the projector will receive the signal from the remote control. Disables or enables all panel key functions except Power on the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 81
rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable. This function is intended for qualified service personnel. Operation 81 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 82
5. SYSTEM SETUP: Advanced menu FUNCTION Test Pattern Closed Caption Standby Settings Network Settings Reset All Settings DESCRIPTION Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 83
6. INFORMATION menu FUNCTION DESCRIPTION FAQ-Image and Installation FAQFeatures and Service Displays possible solutions to problems you may encounter. Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Current System Status Resolution Shows the - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 84
detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 85
Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Total (equivalent) lamp hour = 1 (hours used in Economic mode) - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 86
lamp warning displays will remind you to change the lamp. The warning messages below are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 87
Replacing the lamp • Hg - Lamp contains mercury. Manage in accordance with local disposal laws. See www.lamprecycle.org. • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 88
3. Remove the lamp cover by (a) sliding the cover toward the side of the projector and (b) lifting it off. • Do not turn the power on with the lamp (b) cover removed. (a) • Do not insert your fingers between the lamp and the projector. The sharp edges inside the projector may cause injuries. - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 89
7. Tighten the screws that secure the lamp. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screws. 8. Ensure the handle is fully laid flat and locked in place. 9. Replace the lamp cover by sliding it into place. (a) (b) 10. Tighten the screw - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 90
Indicators Light Status & Description POWER TEMP LAMP Power events Orange Off Green Flashing Off Green Off Orange Flashing Off Lamp events Orange Flashing Off Off Off Thermal events Off Red Off Red Off Red Red Red Red Red Red Red Green Red Green Red Off Stand-by mode - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 91
Troubleshooting The projector does not turn on. Cause There is no power from the power cable. Attempting to turn the projector on again obstacle. Stand within 8 meters (26 feet) of the projector. Remedy Please see "Entering the password recall procedure" on page 35 for details. Troubleshooting 91 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 92
jack x 1 Control RS-232 serial control 9 pin x 1 LAN controk RJ45 x 1 (wired) USB A type x 2 (wireless) Screen control 12V trigger x 1 (0.5 A) USB B type x 1 (Supports firmware upgrade) Input terminals Computer input RGB input D-Sub 15-pin (female) x 2 Video signal input S-VIDEO Mini DIN 4-pin port - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 93
Dimensions 329 mm (W) x 137.2 mm (H) x 241.9 mm (D) 241.9 137.2 Ceiling mount installation 221.0 329 62.5 77.4 Ceiling mount screws: M4 x 8 (Max. L = 8 mm) 75.0 100.0 146.0 100.00 Unit: mm 82.50 116.00 107.7 62.5 163.7 328.0 115.1 129.1 Specifications 93 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 94
Timing chart Supported timing for PC input Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 400 640 x 480 800 x 600 1024 x 768 1024 x 576 1024 x 600 1024 x 600 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 95
Supported timing for HDMI input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400 x 1050 1600 x 1200 - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 96
Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 480p( 50.00 60.00 50.00 Displaying a 1080i@60Hz or 1080i@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 Horizontal - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 97
parts (labor included). To obtain warranty service, immediately notify the dealer from which you operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% mechanical, magnetic, optical, chemical, manual or otherwise, without the prior - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 98
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is shop where you purchased the equipment or your household waste disposal service. The recycling of materials will help to conserve natural resources and - BenQ BenQ MP780ST Interactive Short-Throw 3D Projector | MX750 User Manual - Page 99
products allows us to support government in making accessible technology • All BenQ monitors and projectors come with user manuals on compact discs which could be easily read by may be available upon requests. • BenQ's customer service provides answers and assistance to all our customers through phone
Welcome
MX750/MP780 ST
Digital Projector
User Manual