BenQ BenQ SW916 DLP Network Projector User Manual

BenQ BenQ SW916 DLP Network Projector Manual

Get BenQ BenQ SW916 DLP Network Projector PDF manuals and user guides View all BenQ BenQ SW916 DLP Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ BenQ SW916 DLP Network Projector manual content summary:

  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 1
    SH915/SW916 Digital Projector User Manual
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 2
    Table of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 9 Projector exterior view Maintenance 78 Care of the projector 78 Lamp information 79 Troubleshooting......... 85 Specifications 86 Projector specifications 86 Dimensions 87 Timing chart
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 3
    that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. you operate your protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service personnel. 6. Do not block the projection lens
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 4
    Safety Instructions (Continued) 7. The lamp becomes extremely hot during operation. Allow the on rare death if you should come into occasions. contact with live parts. The only user serviceable part is the lamp which has its own removable cover. Under no circumstances should you ever undo
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 5
    Safety Instructions (Continued) 13. Do not place this projector in any of 14. Do not block the ventilation holes. the following environments. - Space vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 6
    Safety Instructions (Continued) 17. Do not step on the projector or place any become wet, disconnect it from the power supply's wall socket and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images for ceiling mount installation. Use only BenQ's Ceiling
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 7
    . • Instant Restart Selectable Instant Restart function enables you to restart the projector immediately within 90 seconds after turning it off. • 3D Function supported Various 3D formats make the 3D function more flexible. By presenting the depth of the images, you can wear BenQ 3D glasses to enjoy
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 8
    • The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected input signal contrast/brightness settings, and is directly proportional to projection distance. • The lamp brightness will decline over time and may vary within the lamp manufacturers
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 9
    , and may differ from those illustrated. Projector Remote control with battery Power cord QDiugiictakl SPtraorjteGctuoirde VGA cable Quick start guide User manual CD Optional accessories Warranty card* 1. Spare lamp kit 2. Ceiling mount kit 3. Soft Carry Case *The warranty card is only
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 10
    Projector exterior view Front/upper side 1 1. Lamp compartment cover 2. Quick-release button 3. Projection lens 4. Focus ring and Zoom ring 4 5. External control panel 5 (See "Projector" on page 12 for details.) 6. Vent (cool air intake) 7. Front IR remote sensor 8. Lens cap & string 2
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 11
    Bottom side 30 30. Ceiling mount holes 31. Rear adjuster foot 30 31 30 Introduction 11
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 12
    the projected image 8. appearance. See "Fine-tuning the image size and clarity" on page 28 for details. 2. Keystone/Arrow keys ( /▲ Up) Manually corrects distorted images 9. resulting from an angled projection. See "Correcting keystone" on page 28 for details. 3. MENU/EXIT Turns on the On
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 13
    See "Using the menus" on page 33 for details. 13. Manually corrects distorted images resulting from an angled projection. See "Correcting keystone of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 84 for details. TEMPerature indicator light Lights up
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 14
    projector between standby mode and on. 2. Source selection buttons Selects an input source for display. 3. Keystone/Arrow keys ( /▲ Up, 16. /▼ Down) Manually corrects distorted images resulting from an angled projection. 4. MENU/EXIT 17. Turns on the On-Screen Display (OSD) menu. Goes back to
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 15
    20. MUTE Operating the LASER pointer Toggles projector audio between on and The Laser Pointer is a off. 21. SMART ECO Switch the lamp mode between Eco/ Normal and SmartEco. presentation aid for professionals. It emits a beam of red light when you press it. 22. QUICK INSTALL ("TEST" is for Japan
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 16
    +/VOLUME - 3. Keystone/Arrow keys ( /▼ Down, /► Right, /▲ Up, /◄ Left) 17. Adjusts the sound level. BRIGHT Displays the BRIGHTNESS setting bar. Manually corrects distorted images See "Adjusting Brightness" on page 41 for resulting from an angled projection. details. When the On-Screen
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 17
    19. MUTE Operating the LASER pointer Toggles projector audio between on and The Laser Pointer is a off. 20. LAMP MODE Displays the Lamp Mode OSD menu. presentation aid for professionals. It emits a beam of red light when you press it. The laser beam is visible. It is necessary to press and hold
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 18
    Remote control effective range Infra-Red (IR) remote control sensor is located on the front and the rear of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 19
    . • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 20
    Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed on a table in front of the screen. This is the most common way to position the projector for quick
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 21
    Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting (if available), and the video format each factors in the projected image size. Projection dimensions Refer to "Dimensions" on page 87 for the center of lens dimensions of this projector
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 22
    Screen size Distance from screen [mm] Diagonal inch mm 200 5080 250 6350 300 7620 Width Height Min Dis- Average mm mm tance 4428 5535 6641 2491 3113 3736 6190 7737 9285 7722 9652 11583 Max Distance 9254 11567 13881 Offset [mm] A [mm] @ Wide mode 374 467 560 SW916 The screen aspect ratio
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 23
    Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 24
    Connecting video source devices You need only connect the projector to a video source device using just one of the connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the availability of matching terminals on both the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 25
    Playing sound through the projector You can make use of the projector (mixed mono) speaker in your presentations, and also connect separate amplified speakers to the AUDIO OUT socket of the projector. If you have a separate sound system, you will most likely want to connect the audio output of your
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 26
    Operation Starting up the projector 1. Remove the lens cap. 2. Plug the power cord into the projector and into a wall socket. Turn on the wall socket switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied. Please use the original
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 27
    Adjusting the projected image Adjusting the projection angle The projector is equipped with 1 quick-release adjuster foot and 1 rear adjuster foot. These adjusters change the image height and projection angle. To adjust the projector: 1. Press the quick-release button and lift the front of the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 28
    is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you can use Auto Keystone or Keystone manually correct it following one of these steps. • Using the remote control Press / on the projector or remote control to display the Keystone correction
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 29
    projector installation area compared to conventional projectors with limited positioning in front of the screen. To correct this, you will need to manually correct it following one of these steps. • Using the projector or remote control NETWORK SETTING Press / / / on the projector or remote control
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 30
    Correcting Corner Fit Manually adjust four corners of the image by setting the horizontal and vertical values. • Using the OSD menu 1. Press MENU/EXIT and then press ◄/► until the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 31
    Correcting Surface Fit Manually correct geographic distortion by Surface Fit calibration function. • Using the OSD menu 1. Press MENU/EXIT and then press ◄/► until the Display menu is highlighted. 2. Press ▼
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 32
    8. Press ◄/► to select the direction and press MODE/ENTER. 9. Press ▲/▼ to adjust the top or/and bottom side convex or concave. Default is 0 and value is -40~0~40. Single side adjustment is only for distortion. 10. For both sides of the vertical surface fit, use ◄/► to adjust the center of the curve
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 33
    Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. Below is the overview of the OSD menu. Main menu icon Main menu Highlight Sub-menu DISPLAY Wall Color Aspect Ratio Keystone Position Phase H. Size Digital Zoom 3D Teaching
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 34
    settings via the Projector Network Display System The digits being input will display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 35
    another six-digit password, or if you did not record the password in this manual, and you absolutely do not remember it, you can use the password recall and turn off your projector. 3. Seek help from the local BenQ service Recall code: center to decode the number. You may be 12345678 required
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 36
    6. You have successfully assigned a new password to the projector. Remember to enter the new password next time the projector is started. 7. To leave the OSD menu, press MENU/EXIT. Password Changed Disabling the password function To disable password protection, go back to the System Setup:
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 37
    menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector or press input source directly from the remote control. A source selection bar
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 38
    Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. • Using the remote control 1. Press Digital Zoom+/- to display the Zoom bar. Press Digital Zoom+ to magnify the center of the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 39
    About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image 3. 4:3: Scales an image so that it is proportionally to fit the projector's displayed in
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 40
    Optimizing the image Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture's color to prevent possible color difference between the source and projected pictures.
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 41
    6. Press ▼ to select a sub-menu item to be changed and adjust the value with ◄/►. See "Fine-tuning the image quality in user modes" below for details. Fine-tuning the image quality in user modes According to the detected signal type, and selected picture mode, some of the functions listed below
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 42
    Setting a preferred color temperature To set a preferred color temperature: 1. Highlight Color Temperature and select Warm, Normal or Cool by pressing ◄/► on the projector or remote control. 2. Press ▼ to highlight Color Temperature Fine Tuning and press MODE/ ENTER. The Color Temperature Fine
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 43
    Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected RED Yellow GREEN picture will be selected. Increasing its range will include red close to yellow and red close to
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 44
    3. Press ▼ to highlight Timer Display and choose if you want the timer to show up on the screen by pressing ◄/►. Selection Always 3 min/2 min/1 min Never Description Displays the timer on screen throughout the presentation time. Displays the timer on screen in the last 3/2/1 minute(s). Hides the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 45
    Freezing the image Press FREEZE on the remote control to freeze the image. The word 'FREEZE' will appear on the screen. To release the function, press any key on the projector or remote control. If your remote control has the following keys, please note that they cannot be pressed to release the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 46
    Operating in a high altitude environment We recommend you use the High Altitude Mode when your environment is between 1500 m -3000 m above sea level, and temperature is between 0°C-30°C. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and temperature is between 0°C and
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 47
    Adjusting the sound level To adjust the sound level, • Using the remote control Press or to select a desired sound level. • Using the OSD menu 1. Repeat steps 1-2 above. 2. Press ▼ to highlight Volume and press ◄/► to select a desired sound level. Turning off the Power on/off ring tone 1. Repeat
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 48
    Using the teaching templates The projector provides several preset patterns for various teaching purposes. To activate the pattern: 1. Open the OSD menu and go to the Display > Teaching Template and press ▲/▼ to select Blackboard or Whiteboard. 2. Press ◄/► to choose the pattern you need. 3. Press
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 49
    Controlling the projector through a LAN environment Network Settings allow you to manage the projector from a computer using a web browser when the computer and the projector are properly connected to the same local area network. Configuring the Wired LAN Settings If you are in a DHCP environment:
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 50
    Configuring the Wireless LAN Settings 1. Connect the BenQ wireless dongle (optional) to the USB TYPE-A input jack of the projector. 2. Select Wireless LAN in System Setup: Advanced > Network Settings menu and press MODE/ENTER. 3. For AP mode connection, you need to note SSID information, then search
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 51
    2. The BenQ remote network operation page opens. • The web page control supports IE version 7.0 or higher. • The illustrations in web page control, Q Presenter and USB Reader sections are for the purpose of explanation and may differ from
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 52
    i. These buttons function the same as the ones on the remote control. See "Remote Control" on page 14 for details. The Display Setting page allows you to operate the projector as if you were using the OSD menus. These functions are some useful menu settings. The Picture Setting page allows you to
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 53
    The Information page displays the information and status of this projector. The Conference Control page allows you to control computer's display status of all the computers linked to this projector. Operation 53
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 54
    The Crestron page is only available when you are on a Wired LAN network. It also allows you to control the projector remotely. The Crestron supports RoomView version 6.2.2.9. i i ii i iii i. These buttons function the same as the ones on the OSD menus or remote control. See "2. Picture menu" on
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 55
    i. You can name the projector, keep track of its location and the person in charge of it. ii. You can adjust the Wired LAN settings. iii. Once set, access to the remote network operation on this projector has been password-protected. iv. Once set, access to the tools page has been password-protected
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 56
    The Basic page allows you to change the password and select connected persons. The number of connected persons may affect the network display performance. The Wired LAN page allows you to adjust the Wired LAN settings. 56 Operation
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 57
    The Wireless LAN page allows you to adjust the Wirless LAN settings. Max. length for SSID string is 16 bytes. Please use a different SSID when more than two projectors are connecting through wireless LAN. The Mail page allows you to send alert e-mail to your ITS administrator. You can first try
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 58
    Using the Web Control Lock This function is designed to prevent unauthorized people from maliciously changing the projector settings through the Projector Network Display System. To enable the function: 1. After your computer is connected to the projector, enter the address of the projector in the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 59
    5. Click the Search icon. The Search page allows you to search and connect a network display. iv i ii iii i. You can key in the IP address (see "Controlling the projector remotely through a web browser" on page 50 for details.) or just click "Search". ii. Projectors linked in the LAN will be found.
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 60
    i. Full Screen: whole image display on the projector. Selectable: a square will popup then you can move and drag the area you want to show the audience. ii. You can select to Play/Pause displaying desktop contents to connected network isplay. iii. 4-1 Display (up to 4 computers can shoot to 1
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 61
    iii. When you install the Q Presenter, the program will automatically identify the language of your computer's operating system and install the same language as your operating system. If your language isn't included, the system will keep English as the default setting. iv. You can select whether to
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 62
    to do this function: 1. By TCP/IP (support up to 8 porjectors, original design) 2. By Multicast(support up to 255 projectors, this new design) You project this image automatically. There is no need to switch sources manually. To acticate this function: The function requires special version of the
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 63
    Remote Desktop Control through Q Presenter The Q Presenter can proceed the Remote Desktop Control (RDC) the host PC from projector site. 1. Setup the RDC login account (User name and Password ) in Q Presenter. • Name: must be 8 English capital letters A~Z and number 0 ~9. • Password: must be 6
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 64
    images files in JPEG, GIF, TIFF, PNG and BMP formats. • A square box will display on the filename for unidentified characters. • Thai filename is not supported. • Files in GIF, TIFF, PNG and BMP formats can be displayed for the file size smaller than WXGA (1280 x 800) only. • If a folder consists
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 65
    USB Reader menu The USB Reader menu will display only when USB Reader source is selected. This menu is includes with a slideshow feature for making various settings. Main menu Sub-menu USB Reader Slideshow Slideshow Direction Slideshow Timing Repeat Slideshow Auto Rotation Best Fit Shutting down
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 66
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected. Main menu Sub-menu Options Wall color Off/Light Yellow/Pink/Light Green/ Blue/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Keystone (available in SH915) 2D Keystone
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 67
    Main menu Sub-menu Picture Mode 2. Picture 3. Source Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Color Temperature Color Temperature Fine Tuning Primary Color 3D Color Management Hue Saturation Gain Reset picture settings Quick Auto Search Color Space
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 68
    Main menu Sub-menu Presentation Timer Timer Period Timer Display Timer Position Timer Counting Direction Sound Reminder On Off Options 1~240 min Always/1 min/2mins/3 mins/Never Top-Left/Bottom-Left/Top-Right/ Bottom-Right Count Down/Count up On/Off Yes/No Yes/No Language 4. System Projector
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 69
    Main menu Sub-menu High Altitude Mode Audio Settings Lamp Settings 5. System Setup: Advanced Security Setting Baud Rate Test Pattern Closed Caption Standby Settings Options On/Off Mute On/Off Volume Power on/off Ring YES/NO Lamp Mode Normal/Economic/SmartEco Reset Lamp Timer Yes/No
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 70
    Main menu Sub-menu Wired LAN 5. System Setup: Advanced Wireless LAN Network settings Remote Desktop Projection Login Code Broadcasting Reset All Settings AMX Device Discovery Mac Address 6. Current System Information Status Options Status DHCP IP Address Subnet Mask Default Gateway DNS
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 71
    's aspect ratio depending on your input signal source. See "Selecting the aspect ratio" on page 38 for details. Corrects any keystoning of the image manually. See "Correcting keystone" on page 28 for details. The function is only available for SH915. 2D Keystone Adjusts the shape of the projected
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 72
    be adjusted within limited degrees. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Save 3D Settings When you have successfully displayed the 3D contents after making the appropriate adjustments, you can enable this function and choose
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 73
    2. Picture menu FUNCTION DESCRIPTION Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 40 for details. Selects a picture mode
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 74
    4. System Setup: Basic menu FUNCTION DESCRIPTION Presentation Reminds the presenter to finish the presentation within a certain Timer time frame. See "Setting the presentation timer" on page 43 for details. Language Projector Installation Sets the language for the On-Screen Display (OSD) menus
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 75
    . If you enter incorrect password 5 times in succession, the projector will automatically shut down in a short time. Web Control Lock See BenQ Network Projector Operation Guide for details. 5. System Setup: Advanced menu Operation 75
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 76
    you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 77
    5. System Setup: Advanced menu FUNCTION Network settings Reset All Settings Current System Status DESCRIPTION Wired LAN See "Controlling the projector through a LAN environment" on page 49 for details. Wireless LAN See "Controlling the projector through a LAN environment" on page 49 for details.
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 78
    detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 79
    Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: See "Setting Lamp mode as Economic or SmartEco" below for
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 80
    lamp warning displays will remind you to change the lamp. The warning messages below are for reference only. Please follow the actual on-screen instructions to prepare and replace the lamp. Status Message Install a new lamp for optimal performance. If the projector is normally run with Economic
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 81
    Replacing the lamp • If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes caused by fractured lamp. • To reduce the risk of electrical shock, always
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 82
    5. Lift the handle so that it stands up. Use the handle to slowly pull the lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 83
    Resetting the lamp timer 11. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. Highlight Reset lamp timer. A warning message displays asking if you want to reset the lamp timer.
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 84
    Indicators Light Status & Description Power Temp Lamp Power events Orange Off Green Flashing Off Green Off Orange Flashing Off Lamp events Off Stand-by mode Off Powering up Off Normal operation Off Projector is cooling. Off Off Orange Flashing The lamp ignition is not lit up. Off
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 85
    Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cable. Attempting to turn the projector is incorrect Cause Remedy You do not remember the password. Please see "Entering the password recall procedure" on page 35 for details. Troubleshooting 85
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 86
    Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution SH915 1920 x 1080 SW916 1280 x 800 Display system Single-chip DLP™ system Lens F/Number F = 2.42 to 2.97, f = 20.7 to 31.05 mm Lamp SH915 310W lamp SW916 350W lamp Electrical Power
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 87
    Dimensions 360.1 mm (W) x 119.9 mm (H) x 259 mm (D) 259 Ceiling Mount Installation 360.1 119.9 52.3 *Ceiling Mount Screws: M4 (Max. L=25, Min. L=20) Unit: mm Specifications 87
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 88
    Timing chart Supported timing for PC input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1024 x 576 1024 x 600 1280 x 720 1280 x 768 1280 x 800
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 89
    60 H- frequency (kHz) 15.73 31.47 15.63 31.25 37.5 45 28.13 33.75 27 28.13 33.75 56.25 67.5 * Supported timing for 3D signal with Frame Sequential format. Pixel Frequency (MHz) 13.5 27 13.5 27 74.25 74.25 74.25 74.25 74.25
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 90
    50 60 50 60 60 H- frequency (kHz) 15.73 15.63 15.63 15.73 15.63 15.73 15.73 * Supported timing for 3D signal with Frame Sequential format. Support timing for HDMI (HDCP) input Pixel Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 Resolution 640 x 480 720
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 91
    148.5 85.5 106.5 121.75 162 146.25 30.24 57.28 80 100 * Supported timing for 3D signal with Frame Sequential, Top-Bottom and Side-by-Side format. ** Supported timing for 3D signal with Frame Sequential format. *** Supported timing for 3D signal with Top-Bottom and Side-by-Side format. • The timings
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 92
    ) 27 27 27 27 74.25 74.25 74.25 74.25 74.25 74.25 74.25 148.5 148.5 * Supported timing for 3D signal with Frame Sequential, Frame Packing, Top-Bottom and Side-by-Side format. ** Supported timing for 3D signal with Frame Packing, Top-Bottom and Side-by-Side format
  • BenQ BenQ SW916 DLP Network Projector | User Manual - Page 93
    parts (labor included). To obtain warranty service, immediately notify the dealer from which you operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% mechanical, magnetic, optical, chemical, manual or otherwise, without the prior
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
SH915/SW916
Digital Projector
User Manual