BenQ EX480UZ Resolution file

1

Adjusting the screen resolution

Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always fixed.

For the best display performance, please set the display to its maximum resolution that is the

same with the monitor aspect ratio. This is called “Native Resolution” or maximal resolution –

that is, the clearest picture. Please refer to the table below for the native resolution of your LCD.

Lower resolutions are displayed on a full screen through an interpolation circuit. Image blurring

across pixel boundaries can occur with the interpolated resolution depending upon the image

type and its initial resolution.

1.

Open

Display Properties

and select the

Settings

tab.

You can open

Display Properties

by right-clicking on the Windows desktop and selecting

Properties

from the pop-up menu.

1.

Use the slider in the

Screen area

section to adjust the screen resolution.

Select the recommended resolution (maximum resolution) then click

Apply

.

1.

Click

OK

then

Yes

.

2.

Close the

Display Properties

window.

If your input source does not provide an image which is the same with the monitor aspect ratio,

the displayed image may appear stretched or distorted. To maintain the original aspect ratio,

image scaling options can be found in the

Display Mode

adjustment. See the user manual for

more information.

Adjusting the screen refresh rate

You don’t have to choose the highest possible refresh rate on an LCD display, because it is not

technically possible for an LCD display to flicker. The best results are obtained by using the

factory modes already set in your computer. Check next chapter to see the factory modes:

Preset display modes on page 2

.

1.

Double click the

Display

icon in

Control Panel

.

2.

From the

Display Properties

window, select the

Settings

tab and click the

Advanced

button.

3.

Select the

Adapter

tab, and select an appropriate refresh rate to match one of the applicable

factory modes as listed in the specification table.

4.

Click

Change

,

OK

, then

Yes

.

5.

Close the

Display Properties

window.

• To take full advantage of LCD technology you should select the native resolution setting of your PC screen

as described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't,

check with the video card manufacturer's website for an updated driver for your particular model PC video

card which supports this resolution. Software video drivers are often updated and available for new

hardware video resolutions. If necessary, you may need to replace and update the PC video card hardware

to be able to support the native resolution of the monitor.

• Depending on the operating system on your PC, different procedures should be followed to adjust the

screen resolution. Refer to the help document of your operating system for details.

If you select some other resolution, be aware that this other resolution is interpolated and may not accurately

display the screen image as well as it could do at the native resolution setting.

Depending on the operating system on your PC, different procedures should be followed to adjust the screen

resolution. Refer to the help document of your operating system for details.