BenQ SW272Q Resolution file

1

Adjusting the screen resolution

Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always

fixed. For the best display performance, please set the display to its maximum resolution

that is the same with the monitor aspect ratio. This is called “Native Resolution” or maximal

resolution – that is, the clearest picture. Lower resolutions are displayed on a full screen

through an interpolation circuit. Image blurring across pixel boundaries can occur with the

interpolated resolution depending upon the image type and its initial resolution.

1.

Open

Display Properties

and select the

Settings

tab.

You can open

Display Properties

by right-clicking on the Windows desktop and selecting

Properties

from the pop-up menu.

2.

Use the slider in the ‘Screen area’ section to adjust the screen resolution.

Select the recommended resolution (maximum resolution) then click

Apply

.

3.

Click

OK

then

Yes

.

4.

Close the

Display Properties

window.

If your input source does not provide an image which is the same with the monitor aspect

ratio, the displayed image may appear stretched or distorted. To maintain the original

aspect ratio, image scaling options can be found in the “Display Mode” adjustment. See the

user manual for more information.

Adjusting the screen refresh rate

You don’t have to choose the highest possible refresh rate on an LCD display, because it is

not technically possible for an LCD display to flicker. The best results are obtained by using

the factory modes already set in your computer.

1.

Double click the

Display

icon in

Control Panel

.

2.

From the

Display Properties

window, select the

Settings

tab and click the

Advanced

button.

3.

Select the

Adapter

tab, and select an appropriate refresh rate to match one of the

applicable factory modes as listed in the specification table.

4.

Click

Change

,

OK

, then

Yes

.

5.

Close the

Display Properties

window.

To find out the monitor aspect ratio and native resolution of the purchased model, please check the

Specification on the website.

• To take full advantage of LCD technology you should select the native resolution setting of your PC screen

as described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't,

check with the video card manufacturer's website for an updated driver for your particular model PC video

card which supports this resolution. Software video drivers are often updated and available for new

hardware video resolutions. If necessary, you may need to replace and update the PC video card hardware

to be able to support the native resolution of the monitor.

• Depending on the operating system on your PC, different procedures should be followed to adjust the

screen resolution. Refer to the help document of your operating system for details.

If you select some other resolution, be aware that this other resolution is interpolated and may not accurately

display the screen image as well as it could do at the native resolution setting.

Depending on the operating system on your PC, different procedures should be followed to adjust the screen

resolution. Refer to the help document of your operating system for details.