BenQ W700 W700 & W710ST user manual
BenQ W700 Manual
 |
View all BenQ W700 manuals
Add to My Manuals
Save this manual to your list of manuals |
BenQ W700 manual content summary:
- BenQ W700 | W700 & W710ST user manual - Page 1
W700 / W710ST Digital Projector User Manual Welcome - BenQ W700 | W700 & W710ST user manual - Page 2
menu display 45 Shutting down the projector 45 Menu operation 46 Maintenance 54 Care of the projector 54 Lamp information 55 Troubleshooting 61 Specifications 62 Projector specifications 62 Dimensions 63 Timing chart 64 Warranty and Copyright information 69 2 Table of contents - BenQ W700 | W700 & W710ST user manual - Page 3
that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before you 4. Always open the lens shutter or operate your projector. Save it for remove the lens cap when the future reference. projector lamp is on. 5. In some - BenQ W700 | W700 & W710ST user manual - Page 4
part is the lamp which has its own removable cover. Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel. 9. Never replace the lamp assembly or any electronic components unless the projector - BenQ W700 | W700 & W710ST user manual - Page 5
projector. - Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector's life degrees front to back. Using the projector when it is not fully horizontal may cause a malfunction of, or damage to, the lamp. - Locations near fire alarms - - BenQ W700 | W700 & W710ST user manual - Page 6
's wall socket and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images for ceiling mount installation. Use only BenQ's Ceiling Mount Kit for mounting the projector and ensure it is securely installed. Ceiling mounting the projector We want you to have - BenQ W700 | W700 & W710ST user manual - Page 7
and videos • Variable audio output • Wall color 3D color management allowing color adjustments to your liking • Selectable quick cooling function making the projector cool in a shorter time • High quality manual distance. • The lamp brightness will decline over time and may vary within the lamp - BenQ W700 | W700 & W710ST user manual - Page 8
(AU) (JAPAN) Power cord W700 / W710ST Video Projector Quick Start Guide 2011 P/N: 4J.J5401.001 Quick start guide (EU) W700/W710ST 2011 P/N:5B.J5401.001 User manual CD Optional accessories VGA cable Warranty card* 1. Spare lamp kit 2. Ceiling mount kit 3. Presentation Plus 4. Soft Carry Case - BenQ W700 | W700 & W710ST user manual - Page 9
Front/upper side 1 2 3 1. Lamp compartment cover 2. Quick-release button 14 3. Projection lens 25 4. External control panel 6 (See "Projector" on page 10 for details.) 5. Top IR remote sensor 6. Focus ring and Zoom ring 7. Vent (cool air intake) 8. Audio speaker 9. Front IR remote - BenQ W700 | W700 & W710ST user manual - Page 10
when the projector is under Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 33 for details. LAMP indicator light Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem available picture setup mode. See - BenQ W700 | W700 & W710ST user manual - Page 11
3. POWER ON Turns on the projector. See "Starting up the projector" on page 26 for details " on page 27 for details. : Manually corrects distorted images resulting from an angled projection the User memory settings. Note: User 3 not supported for this model. BRIGHT Displays the BRIGHTNESS setting - BenQ W700 | W700 & W710ST user manual - Page 12
the backlight on for a further 10 seconds. 24. Select the display aspect ratios. See "Selecting the aspect ratio" on page 35 for details. FREEZE 17. POWER OFF Freeze/unfreezes the on-screen picture. See Turns off the projector. See "Shutting down "Freezing the image" on page 43 for details - BenQ W700 | W700 & W710ST user manual - Page 13
. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 7 meters (~ 23 feet). Make sure that there are no obstacles between the remote - BenQ W700 | W700 & W710ST user manual - Page 14
only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used battery according to the battery manufacturer's instructions. • Never throw a battery into a fire. There may be danger of an explosion. • If the battery is dead or if you will not be using the - BenQ W700 | W700 & W710ST user manual - Page 15
Select this location with the projector suspended upsidedown from the ceiling in front of the screen. Purchase the BenQ Projector Ceiling Mounting Kit from your dealer to mount your projector on the ceiling. Set Front Ceiling in the SYSTEM SETUP: Basic > Projector Position menu after you turn - BenQ W700 | W700 & W710ST user manual - Page 16
the horizontal plane of the projector. When ceiling mounted, this refers to the top edge of the projected image. If the projector is positioned further away distance. BenQ has provided a table of screen sizes to assist you in determining the ideal location for your projector. Refer to "W700/W710ST - BenQ W700 | W700 & W710ST user manual - Page 17
the corresponding screen diagonal listed in that row. That is the projected image size of the projector at that projection distance. 4. On that same this row shows that a 100-inch screen is required. W710ST: if your measured projection distance was 1.5 m (1500 mm), the closest match in the " - BenQ W700 | W700 & W710ST user manual - Page 18
English W700/W710ST projection dimensions Refer to "Dimensions" on page 64 for the center of lens dimensions of this projector before calculating the appropriate position. Maximum zoom Minimum zoom Screen Center of lens Vertical offset Projection distance W700 16:9 screen diagonal Width - BenQ W700 | W700 & W710ST user manual - Page 19
is 5% tolerance among these numbers due to optical component variations. BenQ recommends that if you intend to permanently install the projector, you should physically test the projection size and distance using the actual projector before you permanently install it, so as to make allowance for - BenQ W700 | W700 & W710ST user manual - Page 20
cable and connect one end of the cable to the audio output socket of the computer, and the other end to the AUDIO socket of the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 48 for details. The final connection - BenQ W700 | W700 & W710ST user manual - Page 21
for business purposes only. They are not designed for, nor intended for stereo audio reproduction use as might be expected in home theater or home cinema applications. Any stereo audio input (if provided), is mixed into a common mono audio output through the projector speakers. Connection 21 - BenQ W700 | W700 & W710ST user manual - Page 22
device. Connect the other end of the cable to the HDMI 1 or 2 signal input socket on the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 48 for details. The final connection path should be like that shown in the - BenQ W700 | W700 & W710ST user manual - Page 23
OUT jack of the AV device. Connect the other end of the cable to the AUDIO IN jack on the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 48 for details. The final connection path should be like that shown in the - BenQ W700 | W700 & W710ST user manual - Page 24
of the Video source device. 2. Connect the other end of the S-Video cable to the S-VIDEO socket on the projector. To connect the projector to an Audio source device: 1. Take a suitable audio cable and connect one end to the AUDIO OUT jack of the AV device. Connect the other end of the cable to the - BenQ W700 | W700 & W710ST user manual - Page 25
OUT jack of the AV device. Connect the other end of the cable to the AUDIO IN jack on the projector. Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 48 for details. The final connection path should be like that shown in the - BenQ W700 | W700 & W710ST user manual - Page 26
screen. Please change to an input signal which is compatible with the projector's resolution or set the input signal to a lower setting. See "Timing chart" on page 65 for details. To maintain the lamp life, once you turn the projector on, wait at least 5 minutes before turning if off. 26 Operation - BenQ W700 | W700 & W710ST user manual - Page 27
Ratio Auto Keystone Keystone Position Phase H. Size Digital Zoom 3D Sync 3D Format 3D Sync Invert S-VIDEO Off Auto On 15 0 Off Frame Sequential Disable MENU Exit SYSTEM SETUP: Basic Language Projector projector. You can locate a Kensington lock slot on the left side of the projector. See "AUDIO - BenQ W700 | W700 & W710ST user manual - Page 28
that displays at projector startup unless the correct password is entered. 1. Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this manual in a - BenQ W700 | W700 & W710ST user manual - Page 29
in this manual, and you BenQ service center to decode the number. You may be required to provide proof of purchase documentation to Recall code: 12345678 verify that you are an authorized user of the MENU Back projector. Changing the password 1. Open the OSD menu and go to the SYSTEM SETUP - BenQ W700 | W700 & W710ST user manual - Page 30
on Lock. You will not have to enter the password next time you turn on the projector. Press to highlight Splash Screen Lock and press / to select Off. The Splash Screen function in the SYSTEM SETUP: Advanced will be available for your change. ii. If the password is incorrect, the password error - BenQ W700 | W700 & W710ST user manual - Page 31
projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press SOURCE on the projector at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, - BenQ W700 | W700 & W710ST user manual - Page 32
or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. To correct this situation, see "Correcting keystone" on page 33 for details. • Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your - BenQ W700 | W700 & W710ST user manual - Page 33
is not perpendicular to the screen. To correct this, besides adjusting the height of the projector, you can use Auto Keystone or Keystone manually correct it following one of these steps. • Using Auto Keystone It can correct Keystone to optimal status by automatically. • Using the remote - BenQ W700 | W700 & W710ST user manual - Page 34
and press MODE/ENTER. The Zoom bar displays. 3. Press on the projector repeatedly to magnify the picture to a desired size. 4. To navigate the the DISPLAY menu is highlighted, and press / to enable or disable 3D Sync. When the 3D Sync is enabled, the current picture mode adjustment will be disabled. - BenQ W700 | W700 & W710ST user manual - Page 35
to the image height. For W700/W710ST, the default aspect ratio is 16:9. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio. With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the - BenQ W700 | W700 & W710ST user manual - Page 36
it displays them without aspect alteration. 4. 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration. 5. 16:10 - BenQ W700 | W700 & W710ST user manual - Page 37
of signals The picture modes available for different types of signals are listed below. 1. Bright mode: Maximizes the brightness of the projected for using the projector in a living room. The brightness is emphasized in this model. 3. Gaming mode: Is designed for playing video games in a bright - BenQ W700 | W700 & W710ST user manual - Page 38
the dark areas is visible. +30 +50 +70 Adjusting Contrast Highlight Contrast in the PICTURE menu and adjust the values by pressing / on the projector or remote control. The higher the value, the greater the contrast. Use this to set the peak white level after you have previously adjusted the - BenQ W700 | W700 & W710ST user manual - Page 39
vibrant colors in picture. It enables a greater than 50% brightness increase in mid-tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don't need it, select Off. On is - BenQ W700 | W700 & W710ST user manual - Page 40
controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter the 3D - BenQ W700 | W700 & W710ST user manual - Page 41
obstructions between the two, and at a distance no greater than 7 meters. You can set the remote receiver in the SYSTEM SETUP: Basic > Remote Receiver menu. My Screen In addition to selecting the projector preset startup screen from among Black, Blue or BenQ screen, you can make your own startup - BenQ W700 | W700 & W710ST user manual - Page 42
6. If the action is successful, you see the message "Captured Succeeded" on the screen. The captured image is saved as My Screen. 7. Restart the projector to view the captured image displayed as the startup screen. In the unlikely event that the capturing action fails, change your target image. When - BenQ W700 | W700 & W710ST user manual - Page 43
release the function, press any key on the projector or remote control. Even if an image is the connected devices have active audio output, you will still hear the audio even though the image is MENU/EXIT and then press / until the SYSTEM SETUP: Advanced menu is highlighted. Notice We recommend you - BenQ W700 | W700 & W710ST user manual - Page 44
projector audio input. See "Connection" on page 20 for how the audio input is connected. INPUT SOURCE Computer PC HDMI 1/2 Component VIDEO S-VIDEO AUDIO IN mini jack HDMI RCA RCA RCA AUDIO SETUP: Advanced menu is highlighted. 2. Press to highlight Audio Settings and press ENTER. The Audio - BenQ W700 | W700 & W710ST user manual - Page 45
. • Menu position in the SYSTEM SETUP: Basic > Menu Settings menu sets the OSD lamp, when you attempt to re-start the projector, the fans will run for a few minutes to cool down. Press POWER again to start the projector after the fans stop and the POWER indicator light turns orange. • Lamp life - BenQ W700 | W700 & W710ST user manual - Page 46
/Blackboard Aspect Ratio Auto/Real/4:3/16:9/16:10 Auto Keystone On/Off Keystone 1. Position DISPLAY Phase H. Size Digital Zoom 3D Sync Off/DLP LINK/NVIDIA 3D Vision 3D Format Frame Sequential/Top-Bottom 3D Sync Invert Disable/Invert Picture Mode Bright/Living Room/Gaming/Cinema - BenQ W700 | W700 & W710ST user manual - Page 47
English Language 4. SYSTEM SETUP: Basic Projector Position Front Table/Rear Table/ Rear Ceiling/Front Ceiling Menu display time 5 sec/10 sec/15 sec/20 sec/ Receiver Front+Top/Top/Front Background Color Black/Blue/Purple Splash Screen BenQ/Black/Blue/MyScreen MyScreen Operation 47 - BenQ W700 | W700 & W710ST user manual - Page 48
/CC3/CC4 Reset All Settings 6. INFORMATI Current System Status ON • Source • Picture Mode • Resolution • Color System • Equivalent Lamp Hour • Firmware Version Note that the menu items are available when the projector detects at least one valid signal. If there is no equipment connected to the - BenQ W700 | W700 & W710ST user manual - Page 49
your input signal source. See "Selecting the aspect ratio" on page 35 for details. Corrects any keystoning of the image automatically. See "Correcting keystone" on page 33 for details. Keystone Position Corrects any keystoning of the image manually. See "Correcting keystone" on page 33 for details - BenQ W700 | W700 & W710ST user manual - Page 50
modes are provided so you can optimize your projector image set-up to suit your program type and further fine-tune the image based on the selections listed on the same page below. See "Setting the Temperature" on page 39 for details. 3D Color Management See "3D Color Management" on page 40 for - BenQ W700 | W700 & W710ST user manual - Page 51
menus. See "Using the menus" on page 27 for details. The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See " to select which logo screen will display during projector start-up. Four options are available: BenQ logo, Black screen, Blue screen, or MyScreen - BenQ W700 | W700 & W710ST user manual - Page 52
computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image - BenQ W700 | W700 & W710ST user manual - Page 53
the PICTURE menu. Resolution Shows the native resolution of the input signal. Color System Shows input system format, NTSC, PAL, SECAM or RGB. Equivalent Lamp Hour Displays the number of hours the lamp has been used. Firmware Version Displays the firmware version of the projector. The INFORMATION - BenQ W700 | W700 & W710ST user manual - Page 54
. The only thing you need to do on a regular basis is to keep the lens clean. Never remove any parts of the projector except the lamp. Contact your dealer if other parts need replacing. Cleaning the lens Clean the lens whenever you notice dirt or dust on the surface. • Use a canister of compressed - BenQ W700 | W700 & W710ST user manual - Page 55
light output will be reduced and result in darker projected pictures. Setting the projector in Economic mode also extends the lamp operation life. To set Economic mode, go into the SYSTEM SETUP: Advanced > Lamp Settings > Lamp mode menu and press / . Setting Auto Power Off This function allows the - BenQ W700 | W700 & W710ST user manual - Page 56
a new lamp at lamp.benq.com OK Notice Replace Lamp Now Lamp > XXXX Hours Lamp usage time exceeded Order a new lamp at lamp.benq.com OK The lamp MUST be replaced before the projector will operate normally. Notice Out of Lamp Usage Time Replace lamp (Refer to user manual) Then reset lamp timer Order - BenQ W700 | W700 & W710ST user manual - Page 57
in a proper manner. • To assure optimal performance from the projector, it is recommended that you purchase a BenQ projector lamp for lamp replacement. 1. Turn the power off and disconnect the projector from the wall socket. If the lamp is hot, avoid burns by waiting for approximately 45 minutes - BenQ W700 | W700 & W710ST user manual - Page 58
lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in tighten the screw. 9. Replace the lamp compartment cover on the projectorand tighten the captive screw. 10. Restart the projector. Do not turn the - BenQ W700 | W700 & W710ST user manual - Page 59
logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings Notice Reset Lamp Timer? menu. Press MODE/ENTER. The Lamp Settings page displays. Press to Reset Cancel highlight Reset lamp timer and press MODE/ENTER. A warning message displays asking if you want - BenQ W700 | W700 & W710ST user manual - Page 60
Green Off Stand-by mode Off Powering up Off Normal operation Off The projector needs to cool for 90 seconds after the power is turned off. Red The lamp ignition retries if the lamp fails during startup. Red 1. The projector needs 90 seconds to cool down. Or 2. Please contact your dealer for - BenQ W700 | W700 & W710ST user manual - Page 61
the projection angle and direction as well as the height of the unit if necessary. Remedy Replace the battery with new one. Remove the obstacle. Stand within 7 meters (23 feet) of the projector. Remedy Please see "Entering the password recall procedure" on page 29 for details. Troubleshooting 61 - BenQ W700 | W700 & W710ST user manual - Page 62
Resolution Display system Lens F/Number Lamp Electrical Digital Projector W700 720p, 1280 x 720 1-CHIP DMD F = 2.52 to 2.73, f = 21.8 to 24 mm 190 W W710ST HDMI COMPONENT S-VIDEO VIDEO SD/HDTV signal input Audio input Output terminal Audio output Speaker Control terminal D-Sub 15-pin (female - BenQ W700 | W700 & W710ST user manual - Page 63
English Dimensions 330 mm (W) x 119.5 mm (H) x 247 mm (D) 247 Ceiling Mount Installation 173.7 47.3 330.0 119.5 58.5 60.0 *Ceiling Mount Screws: M4 x L8 (Max. L=12, Min. L=8) 75 145.0 84.3 75 175 247 60 121.5 127.0 Unit: mm Specifications 63 - BenQ W700 | W700 & W710ST user manual - Page 64
English Timing chart Supported timing for PC input Resolution 640 x 480 720 x 400 800 x 600 1024 x 768 1280 x 720 Horizontal Frequency (kHz) 31.469 37.861 37.500 43.269 61.91 37.927 - BenQ W700 | W700 & W710ST user manual - Page 65
English Resolution 1280 x 800 1280 x 1024 1280 x 960 1440 x 900 1400 x 1050 1600 x 1200 640 x 480@67Hz 832 x 624@ 85.002 59.887 74.984 59.978 60.000 66.667 74.546 75.020 75.06 60 60 * Supported timing for 3D function. Pixel Frequency (MHz) 83.5 106.5 122.500 108.000 135.000 157.500 108 148.500 106 - BenQ W700 | W700 & W710ST user manual - Page 66
English Supported timing for Component-YPbPr input Signal Format 480i(525i)@60Hz 56.26 50.00 Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Supported timing for Video and S-Video inputs Video mode NTSC* PAL* SECAM PAL-M PAL-N PAL-60 NTSC4.43* - BenQ W700 | W700 & W710ST user manual - Page 67
English * Supported timing for 3D function. Supported timing for HDMI (HDCP) input Resolution 720 x 400 640 x 480 800 x 600 1024 x 768 1280 x 720 1280 x 800 1280 x 1024 1280 x 960 Horizontal Frequency (kHz) 37.927 31.469 37.861 - BenQ W700 | W700 & W710ST user manual - Page 68
English Resolution 1440 x 900 1400 x 1050 1600 x 1200 640 x 480@67Hz 832 x 624@75Hz 1024 x 768@75Hz 1152 x 870@75Hz 1080p 1080p 1080P@24Hz 1080P@25Hz 1080P@30Hz Displaying a 1080i_50 or 1080i_60 signal may result in slight image vibration. * Supported timing for 3D function. 68 Specifications - BenQ W700 | W700 & W710ST user manual - Page 69
claim. In the event this product is found to be defective within the warranty period, BenQ's only obligation and your exclusive remedy shall be replacement of any defective parts (labor included). To obtain warranty service, immediately notify the dealer from which you purchased the product of any
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
 |
 |
Welcome
W700 / W710ST
Digital Projector
User Manual