Binatone MBP36 User Manual
Binatone MBP36 Manual
 |
View all Binatone MBP36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Binatone MBP36 manual content summary:
- Binatone MBP36 | User Manual - Page 1
USER'S GUIDE MBP36 BABY MONITOR USER'S GUIDE The features described in user's guide are subject to modifications without prior notice. - Binatone MBP36 | User Manual - Page 2
3383 UK 0845 218 0890 On the Web: www.motorola.com This User's Guide provides you with all the information you need to get the most from your product. Before you can use the baby monitor, we recommend you insert and fully charge the battery in the parent unit, so that it continues to work if you - Binatone MBP36 | User Manual - Page 3
Menu options 7. OK Key O 8. Video ON/OFF Key V Press to turn OFF the LCD display Press again to turn ON the LCD display 9. Talk Key T Press and hold to speak to your baby 10. Power Adapter / Battery LED BLUE when mains adapter power on. RED when battery low. 11. Unit ON/OFF LED (Green) 12 - Binatone MBP36 | User Manual - Page 4
Vision Mode) 2. Camera Lens 3. Infared LEDs 4. Power LED 5. Microphone 8 6. Speaker 7. ON/OFF Switch 8. Power Adapter Connector 9. Antenna 10. Temperature Sensor 11. Pair Key Important guidelines for installing your Baby Monitor • To use your Video Monitor Baby and Parent Unit together, you must - Binatone MBP36 | User Manual - Page 5
ENGLISH Table of contents 1. Safety Instructions 6 2. Getting Started 8 2.1 Baby Unit Power Supply 8 2.2 Parent Unit Battery Installation 8 2.3 Parent Unit Power Supply 9 2.4 Registration (Pairing 10 2.5 View Video Through TV 10 3. Using the Baby Monitor MBP36 11 3.1 Setting up 11 3.2 Pan - Binatone MBP36 | User Manual - Page 6
the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. • Adult assembly is required. Keep small parts away from children when assembling. • This product is not a toy. Do not allow children to play with it. • This baby monitor is - Binatone MBP36 | User Manual - Page 7
use. • Do not use the baby monitor near water. • Do not install the baby monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do - Binatone MBP36 | User Manual - Page 8
to turn the Baby Unit off. 2.2 Parent Unit Battery Installation Black Red 1. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. Small cross head or Flat end screw driver 2. Replace the battery cover over the - Binatone MBP36 | User Manual - Page 9
power adapter (6V DC/500mA). 2. Press and hold the P POWER ON/OFF button for 1 second to turn ON the parent unit. 3. Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. 4. If there is no connection or you are out of range, the - Binatone MBP36 | User Manual - Page 10
to confirm. 6. Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the video from the camera appears. NOTE If a particular Baby Unit was registered previously, registering this current Baby Unit again will overwrite the old registration. 2.5 View - Binatone MBP36 | User Manual - Page 11
Baby Monitor MBP36 3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the parent - Binatone MBP36 | User Manual - Page 12
4. MBP36 Parent Unit Menu Options 4.1 Volume 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until * is highlighted. 3. Press the + UP button or - DOWN button to select the 1X or 2X Zoom. (The default setting is 1X.) 12 MBP36 Parent Unit Menu Options - Binatone MBP36 | User Manual - Page 13
the baby unit until the parent unit finds the camera, beeps and the picture from the camera appears. NOTE A camera can only be registered to one parent unit at any one time. 4.6.2 View a camera 1. Press and press the OK button to view the picture from that camera. MBP36 Parent Unit Menu Options 13 - Binatone MBP36 | User Manual - Page 14
or - DOWN button to select the desired CAM, and press the OK button to delete that registration. 4.6.4 Scan camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT Press the + UP button or - DOWN button to select ºC or ºF. 14 MBP36 Parent Unit Menu Options - Binatone MBP36 | User Manual - Page 15
on the product, user's guide and/or box parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack - Binatone MBP36 | User Manual - Page 16
agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals -- this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP36 away from hot, humid areas or strong sunlight, and don't let - Binatone MBP36 | User Manual - Page 17
by pressing any key. Registration If the Baby Unit has lost its link with the Parent Unit • Try recharging or replacing the battery pack. • If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. • Reset the units by disconnecting them from the - Binatone MBP36 | User Manual - Page 18
and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.4GHz products, such as wireless networks (WiFi routers), Bluetooth® systems, or microwave ovens, may cause interference with this product, so keep the baby monitor - Binatone MBP36 | User Manual - Page 19
not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service: US and Canada 1-888-331-3383 UK 0845 218 0890 To order a replacement battery pack, contact customer service or visit our website. Consumer Products - Binatone MBP36 | User Manual - Page 20
OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT - Binatone MBP36 | User Manual - Page 21
maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged acts which are not the fault of MOTOROLA or BINATONE., are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or - Binatone MBP36 | User Manual - Page 22
Motorola branded housings, or parts, are excluded from coverage. Communication Services instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service (d) a written description of the problem; and, most importantly; (e) your - Binatone MBP36 | User Manual - Page 23
in accordance with the instructions, may cause harmful user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two the FCC criteria. The Baby unit shall be installed and used such that parts of the user's body other than the - Binatone MBP36 | User Manual - Page 24
expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. Industry Canada This device Canada licence-exempt RSS standard(s): Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this - Binatone MBP36 | User Manual - Page 25
ENGLISH Technical Specifications Baby unit (Model: MBP36BU) Frequency 2.4GHz to 2.48GHz Image sensor colour / color CMOS 30M Pixels Lens f 2.5mm, F 2.8 ; Output: 5.9V, 1000mA WARNING Use only with provided power supply. FCC ID VLJ - MBP36BU IC ID 4522A- MBP36BU General Information 25 - Binatone MBP36 | User Manual - Page 26
- TFL3X44AAA900, NI-MH AAA 3 x 1.2V 900mAh rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC ID IC ID VLJ - MBP36PU 4522A- MBP36PU - Binatone MBP36 | User Manual - Page 27
We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom. Declare under our sole responsibility that the following product Type of equipment: Model Name: Digital Baby Monitor MBP 36 Country of Origin: Brand: China Motorola complies with the essential - Binatone MBP36 | User Manual - Page 28
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
USER’S GUIDE
MBP36
BABY MONITOR
USER’S GUIDE
The features described in user's guide are subject to
modifications without prior notice.