Biostar G31-M7 Setup Manual
Biostar G31-M7 Manual
 |
View all Biostar G31-M7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar G31-M7 manual content summary:
- Biostar G31-M7 | Setup Manual - Page 1
G31-M7 OC Setup Manual FCC Information and Copyright This equipment has been tested and found to can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will - Biostar G31-M7 | Setup Manual - Page 2
Checklist 1 1.3 Motherboard Features 2 1.4 Rear Panel Connectors 3 1.5 Motherboard Layout 4 Chapter 2: Hardware Installation 5 2.1 4.1 Driver Installation Note 18 4.2 Software 19 4.3 Extra Information 24 4.4 AMI BIOS Beep Code 26 4.5 Troubleshooting 27 Appendix: SPEC In - Biostar G31-M7 | Setup Manual - Page 3
G31-M7 OC 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions Rear I/O Panel for ATX Case X 1 Installation Guide X 1 Fully Setup Driver CD X 1 (full version manual files inside) FDD Cable X 1 (optional) - Biostar G31-M7 | Setup Manual - Page 4
/ Virtualization Celeron 4xx processor Technology FSB Support 800 / 1066 / 1333 / 1600 MHz Chipset Intel G31 Intel ICH7 ITE 8712F Environment Control initiatives, Super I/O Provides the most commonly used legacy Hardware Monitor Controller Super I/O functionality. Fan Speed Controller - Biostar G31-M7 | Setup Manual - Page 5
Keyboard PS/2 Mouse Back Panel VGA port I/O LAN port USB Port Audio Jack Board Size 179 (W) x 235 (L) mm OS Support Windows 2000 / XP / VISTA G31-M7 OC SPEC x4 Each connector supports 1 SATA devices x1 Supports front panel facilities x1 Supports front panel audio function x1 CPU Fan power - Biostar G31-M7 | Setup Manual - Page 6
Motherboard Manual 1.5 MOTHERBOARD LAYOUT JKBMS1 JATXPWR2 LGA775 CPU1 JCFAN1 JATXPWR1 DDR2_A1 DDR2_B1 JVGA1 JUSBV1 JUSB2 JRJ45USB1 I nt el G31 IDE1 JAUDIO1 BIOS JAUDIOF1 LAN BATTERY PEX16_1 Super I/O Codec PCI1 JPRNT1 PCI2 JCOM2 Intel ICH7 JUSB3 FDD1 JSFAN1 JUSB4 JPANEL1 - Biostar G31-M7 | Setup Manual - Page 7
G31-M7 OC CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, - Biostar G31-M7 | Setup Manual - Page 8
Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will - Biostar G31-M7 | Setup Manual - Page 9
G31-M7 OC 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan Pin Assignment 1 Ground 2 +12V 3 FAN RPM rate sense Note: The JCFAN1 support 4-pin head connector and JSFAN1 support 3-pin head connector. When connecting with wires onto connectors, please note that the - Biostar G31-M7 | Setup Manual - Page 10
DDR2_A 1 DDR2_B 1 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY A. DDR2 module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break - Biostar G31-M7 | Setup Manual - Page 11
B. Memory Capacity DIMM Socket Location DDR2_A1 DDR2_B1 DDR2 Module 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB G31-M7 OC Total Memory Size Max is 4GB. C. Dual Channel Memory Installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: - Biostar G31-M7 | Setup Manual - Page 12
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1: IDE/ATAPI - Biostar G31-M7 | Setup Manual - Page 13
G31-M7 OC PEX16_1: PCI-Express x16 Slot - PCI-Express 1.0a compliant. - Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. - PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. - 2X bandwidth over the traditional PCI - Biostar G31-M7 | Setup Manual - Page 14
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the - Biostar G31-M7 | Setup Manual - Page 15
G31-M7 OC JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment - Biostar G31-M7 | Setup Manual - Page 16
Motherboard Manual JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel This motherboard provides 2 USB 2.0 headers, which allows user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, - Biostar G31-M7 | Setup Manual - Page 17
G31-M7 OC JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 3 1 Pin 1-2 Close: Normal Operation (Default). 3 1 3 1 Pin 2-3 Close: Clear CMOS data. - Biostar G31-M7 | Setup Manual - Page 18
Motherboard Manual JUSBV1: Power Source Header for USB Ports Pin 1-2 Close: +5V for USB ports at JUSB2/JRJ45USB1. Pin 2-3 Close: +5V STB for USB ports at JUSB2/JRJ45USB1. 3 1 3 1 Pin 1-2 close 3 1 Pin 2-3 close JCOM2: Serial port Connector The motherboard has a Serial Port Connector for - Biostar G31-M7 | Setup Manual - Page 19
JPRNT1: Printer Port Connector This header allows you to connector printer on the PC. G31-M7 OC 2 1 Pin Assignment 1 -Strobe 2 -ALF 3 Data 0 4 -Error 5 Data 1 6 -Init 7 Data 2 8 -Scltin 9 Data 3 10 Ground 11 Data 4 12 Ground 13 Data 5 25 Pin Assignment 14 Ground - Biostar G31-M7 | Setup Manual - Page 20
better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn't show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under your - Biostar G31-M7 | Setup Manual - Page 21
4.2 SOFTWARE G31-M7 OC Installing Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Autorun function has been enabled. 2. Select Software Installation, and then click on the respective software title. 3. Follow the on-screen instructions to - Biostar G31-M7 | Setup Manual - Page 22
motherboard/BIOS/CPU/video/ device/OS service. If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar - Biostar G31-M7 | Setup Manual - Page 23
G31-M7 OC BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Online Update function (Only for AMI BIOS) Save current BIOS to a .bin - Biostar G31-M7 | Setup Manual - Page 24
Motherboard Manual Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup - Biostar G31-M7 | Setup Manual - Page 25
G31-M7 OC (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Online Update button, the utility will search for the latest BIOS from internet. If - Biostar G31-M7 | Setup Manual - Page 26
Motherboard Manual 4.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the - Biostar G31-M7 | Setup Manual - Page 27
G31-M7 OC BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. - Biostar G31-M7 | Setup Manual - Page 28
video adapter) Troubleshooting POST BIOS Beep Codes Number of Beeps Troubleshooting Action 1, 3 Reseat the memory, or replace with known good modules. Fatal error indicating a serious problem with the system. Consult your system manufacturer. Before declaring the motherboard beyond all hope - Biostar G31-M7 | Setup Manual - Page 29
G31-M7 OC 4.5 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support . Check cable running from disk to Review - Biostar G31-M7 | Setup Manual - Page 30
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen LGA 775 Unterstützt Hyper-Threading / Execute Disable Bit / Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / IntelArchitecture-64 / CPU Pentium Dual-Core / Celeron Dual-Core / Extended Memory 64 Technology / - Biostar G31-M7 | Setup Manual - Page 31
/A LAN-Anschluss USB-Anschluss Audioanschluss Platinengröße 179 mm (B) X 235 mm (L) OS-Unterstüt Windows 2000 / XP / VISTA zung G31-M7 OC Spezifikationen x2 Fronttafel-USB-Anschlüsse x1 x1 x1 x1 x1 x1 x4 x3 Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung für ein Betriebssystem - Biostar G31-M7 | Setup Manual - Page 32
Motherboard Manual FRANCE SPEC LGA 775 Prend en charge les technologies Hyper-Threading / Processeurs Intel Core2Duo / Core2Quad d'exécution de bit de désactivation / Intel SpeedStep® UC / PentiumDual-Core / Celeron Dual-Core / optimisée/ d'architecture Intel Intel G31 Intel 2.0 LAN Realtek - Biostar G31-M7 | Setup Manual - Page 33
G31-M7 OC SPEC Connecteur SATA Chaque connecteur prend en charge 1 périphé panneau Port LAN x1 arrière Port USB x4 Fiche audio x3 Dimensions 179 mm (l) X 235 mm (H) de la carte Support SE Windows 2000 / XP / VISTA Biostar se réserve le droit d'ajouter ou de supprimer le support de SE - Biostar G31-M7 | Setup Manual - Page 34
Tecnologia V irtualization FSB 800 / 1066 / 1333 / 1600 MHz Chipset Intel G31 Intel ICH7 ITE 8712F Funzioni di controllo dell'ambiente: Fornisce le funzionalità legacy Super Monitoraggio hardware Super I/O I/O usate più comunemente. Controller / Monitoraggio velocità ventolina Interfaccia - Biostar G31-M7 | Setup Manual - Page 35
G31-M7 OC SPECIFICA Connettore IDE x1 Ciascun connettore supporta 2 unità IDE Connettore I/O Porta VGA x1 pannello Porta LAN x1 posteriore Porta USB x4 Connettore audio x3 Dimension 179 mm (larghezza) x 235 mm i scheda (altezza) Sistemi Biostar si riserva il diritto di aggiungere - Biostar G31-M7 | Setup Manual - Page 36
G31 chips Intel ICH7 ITE 8712F Iniciativas de control de entorno, Le ofrece las funcionalidades heredadas de Monitor hardware Súper E/S uso más común Súper E/S. Controlador/monitor de velocidad de ventilador Interfaz de cuenta Low Pin Función "Guardia inteligente" de ITE Ranuras DIMM DDR2 - Biostar G31-M7 | Setup Manual - Page 37
G31-M7 OC Especificación Conector IDE X1 Cada conector soporta 2 dispositivos IDE Conector SATA X4 Cada mm. (A) X 235 Mm. (H) la placa Soporte de sistema Windows 2000 / XP / VISTA operativo Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo. 35 - Biostar G31-M7 | Setup Manual - Page 38
Monitorização do hardware Controlador/Monitor da velocidade da ventoinha Função "Smart Guardian" da ITE Memória principal Ranhuras DIMM DDR2 x 2 Módulo de memória DDR2 de canal duplo Cada módulo DIMM suporta uma Suporta módulos DDR2 800/667 memória DDR2 de 256 MB / 512 MB / 1GB Os módulos DIMM - Biostar G31-M7 | Setup Manual - Page 39
G31-M7 OC ESPECIFICAÇÕES Conector da unidade de disquetes x1 Cada conector suporta x1 aídas no Porta VGA x1 painel Porta LAN x1 traseiro Porta USB x4 Tomada de áudio x3 Tamanho da placa 179 mm (L) X 235 mm (A) Sistemas A Biostar reserva-se o direito de adicionar ou remover operativos - Biostar G31-M7 | Setup Manual - Page 40
Motherboard Manual POLISH SPEC LGA 775 Obsługa Hyper-Threading / Execute Disable Bit / Procesor Procesor Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / Intel 800 / 1066 / 1333 / 1600 MHz Chipset Intel G31 Intel ICH7 Pamięć główna Gniazda DDR2 DIMM x 2 Każde gniazdo DIMM obsługuje - Biostar G31-M7 | Setup Manual - Page 41
G31-M7 OC SPEC Złącze IDE x1 Każde złącze obsługuje 2 urządzenia IDE Złącze x1 Złącze zasilania (4 pinowe) x1 Klawiatura PS/2 x1 Mysz PS/2 x1 Back Panel Port VGA x1 I/O Port LAN x1 Port USB x4 Gniazdo audio x3 Wymiary płyty 179 mm (S) X 235 mm (W) Obsluga systemu Windows 2000 - Biostar G31-M7 | Setup Manual - Page 42
Motherboard Manual RUSSIAN СПЕЦ CPU LGA 775 Hyper-Threading / Execute Intel Core2Duo / Core2Quad / Disable Bit / Enhanced Intel SpeedStep® / Intel МГц Набор Intel G31 Intel ICH7 Слоты DDR2 DIMM x 2 DDR2 DIMM DDR2 800/667 память 256 МБ / 512МБ / 1ГБ / 2ГБ DDR2 4ГБ DIMM - Biostar G31-M7 | Setup Manual - Page 43
G31-M7 OC СПЕЦ IDE 2 x1 SATA x4 1 SATA x1 x1 x1 x1 CMOS x1 USB 2 USB x2 24 вывод) x1 4 вывод) x1 PS/2 x1 PS/2 x1 панель Порт VGA x1 LAN x1 USB-порт x4 ода x3 179 мм (Ш) X 235 мм - Biostar G31-M7 | Setup Manual - Page 44
Motherboard Manual ARABIC Hyper-Threading / Execute Disable Bit LGA 775 Enhanced Intel SpeedStep® / Intel Architecture-64 / Intel / 1066 / 1333 / 1600 Intel G31 Intel ICH7 DDR2 800/667 DDR2 ECC DIMM DDR2 DIMM 2 DDR2 DIMM 2 1 256/512 4 - Biostar G31-M7 | Setup Manual - Page 45
G31-M7 OC 1 1 1 IDE 1 IDE SATA 4 SATA Smart Fan 1 1 1 1 PS/2 1 VGA 1 4 USB 3 179 235 X Biostar Windows 2000 / XP / VISTA 43 - Biostar G31-M7 | Setup Manual - Page 46
Motherboard Manual JAPANESE 仕様 LGA 775 Hyper-Threading / Execute Disable Bit / Enhanced Intel Intel Core2Duo / Core2Quad / SpeedStep® / Intel / 1333 / 1600 MHz Intel G31 Intel ICH7 DDR2 DIMM x 2 各DIMMは 256MB / 512MB / 1GB / 2GB DDR2 4GB DDR2 DDR2 800/667 DIMMとECC DIMM - Biostar G31-M7 | Setup Manual - Page 47
CMOS USBコネクタ 24ピン) 4ピン) PS/2 PS/2マウス VGAポート I/O LANポート USBポート 179 mm (幅) X 235 mm (高さ) OS Windows 2000 / XP / VISTA G31-M7 OC 仕様 x1 2 x1 1 x1 x1 2つのIDE x4 1つのSATA x1 x1 x1 CPU x1 x1 2 USB x2 ます x1 x1 x1 x1 x1 x1 x4 x3 Biostar OS 2008/08/21 45
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
 |
 |
G31-M7 OC Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.