Biostar GF8100M2TE Bios Setup
Biostar GF8100M2TE Manual
 |
View all Biostar GF8100M2TE manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar GF8100M2TE manual content summary:
- Biostar GF8100M2TE | Bios Setup - Page 1
GF8100 M 2+ TE BIOS Manual BIOS Setup 1 1 Main Menu 3 2 Advanced Menu 7 3 PCIPnP Menu 19 4 Boot Menu 22 5 Chipset Menu 24 6 Performance Menu 26 7 Exit Menu 35 i - Biostar GF8100M2TE | Bios Setup - Page 2
GF8100 M 2+ TE BIOS Manual BIOS Setup Introduction T he purpose of this manual is to describe the settings in the AMI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. T he power of CMOS RAM is - Biostar GF8100M2TE | Bios Setup - Page 3
GF8100 M 2+ TE BIOS Manual PCI Bus Support T his AMI BIOS also supports Version 2.3 of the Intel PCI (Peripheral Component Interconn ect) local bus speci fication. DRAM S upport DDR2 SDRAM (Double Data Rate II Synchronous DRAM) is supported. Supported CP Us T his AMI BIOS supports the AMD CPU. - Biostar GF8100M2TE | Bios Setup - Page 4
GF8100 M 2+ TE BIOS Manual 1 Main Menu Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system inform ation. Main Advan ced BIOS SETU P U TILITY PCIPnP Boot Chipset Performance Exit System Overvie w AMI BIOS Version :01. 01.01 - Biostar GF8100M2TE | Bios Setup - Page 5
GF8100 M 2+ TE BIOS Manual Floppy A Select the type of floppy disk drive installed in your system. Options: 1.44M, 3.5 in (Default) / 360K, 5.25 in / 1.2M, 5.25 in / 720K, 3.5 in / 2.88M, 3.5 in / None IDE Configuration T he BIOS will automatically detect the presence of ID E/SAT A devices. There - Biostar GF8100M2TE | Bios Setup - Page 6
GF8100 M 2+ TE BIOS Manual Change the AHCI DID for Linux T his item appears only when SAT A mode is set to AHCI. Options: Disabled (Default) / Enabled Primary IDE Master/Slav e ; SATA 1/2/3/4 Device Main BIOS 200x, American Megatrends, Inc. T he BIOS detects the information and values of resp - Biostar GF8100M2TE | Bios Setup - Page 7
GF8100 M 2+ TE BIOS Manual DMA Mode Select the DMA mode. Options: Auto (Default) / Disabled S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting T echnology. Options: Auto (Default) / Disabled / Enabled 32Bit Data Transfer Enable or disable 32-bit data transfer. Options: Enabled (Default) / - Biostar GF8100M2TE | Bios Setup - Page 8
GF8100 M 2+ TE BIOS Manual 2 Advanced Menu T he Advanced Menu allows you to configu re the settings of CPU, Super I/O, Power Management, and other system devices. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advan ced BIOS - Biostar GF8100M2TE | Bios Setup - Page 9
GF8100 M 2+ TE BIOS Manual Secure Virtual Machine Mode Virtualization T echnology can virtually scans the ACPI SRAT at boot time and uses the information to better allocate memory and schedule software threads for maximum perform ance. T his item controls whether the SRAT is made available to the - Biostar GF8100M2TE | Bios Setup - Page 10
GF8100 M 2+ TE BIOS Manual Serial Port1 Address Select an address and corresponding interrupt fo r the first and second seri al ports. Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / - Biostar GF8100M2TE | Bios Setup - Page 11
GF8100 M 2+ TE BIOS Manual Hardware Health Configuration T his item shows the system temperature, fan speed, and voltage information. Advan ced BIOS SETU P U TILITY Hardware Healt h Configuration H/W Health Fun ction Shutdown Tempe rature [Ena bled] [Dis abled] Enables Hardware Health - Biostar GF8100M2TE | Bios Setup - Page 12
GF8100 M 2+ TE BIOS Manual Smart Fan Configuration Advan ced BIOS SETU P U TILITY Smart Fan Conf Control Mode T his item provides several operation modes of the fan. Options: Quiet / Performan ce / Manual Fan Ctrl OFF(℃ ) If the CPU/System T emperature is lower than the set value, FAN will - Biostar GF8100M2TE | Bios Setup - Page 13
GF8100 M 2+ TE BIOS Manual Fan Ctrl Start Value When CPU/System temperature arriv es to the set value, the CPU/System fan will work under Smart Fan Function mode. - Biostar GF8100M2TE | Bios Setup - Page 14
GF8100 M 2+ TE BIOS Manual Chipset ACPI Configuration Advan ced BIOS SETU P U TILITY Chipset ACPI C onfiguration SouthBridge AC PI HPET TABLE [Ena bled] ACPI PM Timer Width [24- bits / Disabled ACPI PM Timer Width Options: 24-bits (Default) / 32-bits Suspend mode T he item allows you to - Biostar GF8100M2TE | Bios Setup - Page 15
GF8100 M 2+ TE BIOS Manual ACPI APIC support T his item is used to enable or disable the motherboard's APIC (Advan ced Programmable Interrupt Controller). T he APIC provides multiprocessor support, more IRQs and faster interrupt handling. Options: Enabled (Default) / Disabled AMI OEMB table Set this - Biostar GF8100M2TE | Bios Setup - Page 16
GF8100 M 2+ TE BIOS Manual RTC Alarm Date (Days) You can choose which date the system En abled: Options Enabled Disabled USB 1.1 Contro ller USB 2.0 Contro ller Legacy USB Sup port USB 2.0 Contro ller Mode BIOS EHCI Hand -Off [Ena bled] [Ena bled] [Ena bled] [HiS peed] [Ena bled] > USB Mass Sto - Biostar GF8100M2TE | Bios Setup - Page 17
GF8100 M 2+ TE BIOS Manual Legacy USB Support T his item determines if the BIOS should provide legacy support fo r USB devices like the keyboard, mouse, and USB drive. T his is a useful feature when using such USB devices with operating systems that do not natively support USB (e.g. Microso ft DOS - Biostar GF8100M2TE | Bios Setup - Page 18
GF8100 M 2+ TE BIOS Manual Emulation Type T his item allows you to select the emulation type of the USB mass storage device. Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM AUDIO Configuration Advan ced BIOS SETU P U TILITY AUDIO Configur ation AZALIA AUDIO [Int ernal codec + - Biostar GF8100M2TE | Bios Setup - Page 19
GF8100 M 2+ TE BIOS Manual Onboard LAN Configuration Advan ced BIOS SETU P U TILITY Onboard LAN Co nfiguration Onboard LAN Onboard Lan Bo ot ROM MAC ID Informa tion : [Aut o] [Dis abled] Control onboard Lan on/off S - Biostar GF8100M2TE | Bios Setup - Page 20
GF8100 M 2+ TE BIOS Manual 3 PCIPnP Menu T his section describes con figuring the PCI bus S PCI Latency Ti mer Allocate IRQ t o PCI VGA Palette Snoopi ng PCI IDE BusMas ter [No] [No] [32] [Yes ] [Dis abled] [Ena bled] > PCI Resource > PCI Express Configuration Clear NVRAM during System Boot. S - Biostar GF8100M2TE | Bios Setup - Page 21
GF8100 M 2+ TE BIOS Manual PCI Latency Timer T his item controls how long a PCI device can hold the PCI bus before another takes over. T he longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device. Options: 32 -in driver that allows - Biostar GF8100M2TE | Bios Setup - Page 22
GF8100 M 2+ TE BIOS Manual IRQ3/4/5/7/9/10/11/14/15 T hese items will allow you to assign each system interrupt a type, depending on the for the PCI Express devices b efore the operating system boots. T his function is for OS which does not support ASPM. Options: Disabled (Default) / Enabled 21 - Biostar GF8100M2TE | Bios Setup - Page 23
GF8100 M 2+ TE BIOS Manual 4 Boot Menu T his menu allows you to setup the system boot options. Main Advan ced BIOS SETU P U Mode Bootup Num-Loc k Interrupt 19 C apture [Ena bled] [Ena bled] [For ce BIOS] [ON] [Ena bled] Specifies the Boot Device Priority sequence. S elect Screen S elect - Biostar GF8100M2TE | Bios Setup - Page 24
GF8100 M 2+ TE BIOS Manual CD/DV D Drives T he BIOS will attempt to arrange the CD/DVD drive Disabled AddOn ROM Display Mode T his item sets the display mode for option ROM. Options: Force BIOS (Default) / Keep Current Bootup Num-Lock Selects the NumLock State after the system switched on. Options - Biostar GF8100M2TE | Bios Setup - Page 25
GF8100 M 2+ TE BIOS Manual 5 Chipset Menu T his submenu allows you to configure the speci fic [Dis abled] [PCI E VGA Card Firs] [Dis able iGPU if Ex] [Aut o] [256 MB] [Gen 2 if supported] Iso Flow Contr ol Hi Priority Ch annel Display Refres h [Dis abled] [Ena bled] [Ena bled] 1 Memory have to - Biostar GF8100M2TE | Bios Setup - Page 26
GF8100 M 2+ TE BIOS Manual iGPU and Ext-V GA Selection T his item determines the VGA. Options: 256MB (Default) / 32MB / 64MB / 128MB / Disabled PCIE Training Options: Gen2 if supported (Default) / Only Gen1 Iso Flow Control Options: Disabled (Default) / Enabled Hi Priority Channel Options: Enabled - Biostar GF8100M2TE | Bios Setup - Page 27
GF8100 M 2+ TE BIOS Manual 6 Performance Menu T his submenu allows you to change voltage setting inappropriate values in items of this menu may cause system to malfunction. Main Advan ced BIOS SETU P U TILITY PCIPnP Boot Chipset Performance Exit Performance Se ttings WARNING: Setti ng wrong - Biostar GF8100M2TE | Bios Setup - Page 28
GF8100 M 2+ TE BIOS Manual Over-Voltage Configuration BIOS SETU P U TILITY Performance Over-Voltage C onfiguration Processor Volt age CPU Over-Volta ge Chipset Over-V oltage HT Over-Voltag e Memory Over-Vo ltage [A uto] [S tartUp] [ - Biostar GF8100M2TE | Bios Setup - Page 29
GF8100 M 2+ TE BIOS Manual DRAM Timing Configuration BIOS SETU P U TILITY Performance DRAM Timing Co nfiguration Memory DIMMs MemClk Tristat e C3/ATLVID Memory Hole Re mapping Power Down Ena ble Power Down M ode BIOS SETU P U TILITY Performance [Aut o] [Dis abled] [Dis abled] [Ena bled] [Dis - Biostar GF8100M2TE | Bios Setup - Page 30
GF8100 M 2+ TE BIOS Manual Enable Clock to All DIMMs T his item determines whether the BIOS should actively reduce EMI (Electromagn remapping of the overlapped PCI memory above the total physical memory. Only 64-bit OS supports this function. Options: Enabled (Default) / Disabled Power Down Enable T - Biostar GF8100M2TE | Bios Setup - Page 31
GF8100 M 2+ TE BIOS Manual TR CD Options: Auto (Default) TRP Options: Auto (Default) tR TP Options: Auto (Default) TR AS Options: Auto (Default) TR C Options: Auto (Default) tWR Options: - Biostar GF8100M2TE | Bios Setup - Page 32
GF8100 M 2+ TE BIOS Manual tWRWR Options: Auto (Default) tRDRD Options: Auto (Default) tRFC0 / tRFC1 / tRFC2 / tRFC3 Options: Auto (Default) Spread Spectrum Configuration BIOS SETU P U TILITY Performance Spread Spectru m Configuration CPU/LDT Spread Spectrum PCIE Spread Sp ectrum SATA Spread - Biostar GF8100M2TE | Bios Setup - Page 33
GF8100 M 2+ TE BIOS Manual PCI Spread Spectrum T his item allows you to control the PCI spread spectrum. Options: Disabled (Default) / Enabled iGPU Spread Spectrum T Core FID T his item allows you to select the Ratio/Frequency of AM2+ CPU. Options: x8.0 1600MHz ~ x31.5 6300MHz (Differs by CPU) 32 - Biostar GF8100M2TE | Bios Setup - Page 34
GF8100 M 2+ TE BIOS Manual Core VID (for AM2+ CPU) T his function allows you to adjust the voltage of CPU. Options: 0.0125V ~ 1.5500V (differs from CPU : 16↓16↑ (Default) / 8↓8↑ / 4↓4↑ Memory Clock Mode T his item allows you to control the Memory Clock. Options: Auto (Default) / Limit / Manual 33 - Biostar GF8100M2TE | Bios Setup - Page 35
GF8100 M 2+ TE BIOS Manual MemClock Value Options: 200MHz (Default) / 266 MHz / 333 MHz / 400 MHz / 533 MHz (with AM2+ CPU) MCP PCI-Express Frequenc y, M Hz Options: 100 (MHz) (Default) / 100 ~ 200 34 - Biostar GF8100M2TE | Bios Setup - Page 36
GF8100 M 2+ TE BIOS Manual 7 Exit Menu T his menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Main Advan ced PCIPnP Exit Options Save Changes a nd Exit Discard Change s and Exit Discard Change s Load Optimal D efaults BIOS BIOS when problem - Biostar GF8100M2TE | Bios Setup - Page 37
GF8100 M 2+ TE BIOS Manual Security T his sub-menu allows you to provide/revise supervisor and user password. BIOS SETU P U TILITY Exit Security Setti ngs Supervisor Pas sword :Not Installe d User Password :Not Installe d Change Supervi sor Password User Access Le vel Change User - Biostar GF8100M2TE | Bios Setup - Page 38
GF8100 M 2+ TE BIOS Manual Passw ord Check T his item is for setting the timing that checking password. Options: Setup is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Options: Disabled (Default) / Enabled 37
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
GF8100 M 2+ TE BIOS Manual
i
BIOS Setup
.................................................................................................
1
1 Main Menu
...............................................................................................
3
2 Advanced Menu
.......................................................................................
7
3 PCIPnP Menu
........................................................................................
19
4 Boot Menu
..............................................................................................
22
5 Chipset Menu
.........................................................................................
24
6 Performance Menu
...............................................................................
26
7 Exit Menu
...............................................................................................
35