Biostar GF8200C M2 Setup Manual
Biostar GF8200C M2 Manual
 |
View all Biostar GF8200C M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar GF8200C M2 manual content summary:
- Biostar GF8200C M2 | Setup Manual - Page 1
GF8100 M2+ TE/GF8200C M2+ Setup Manual FCC Information and Copyright This equipment has been tested and found to comply with the limits frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee - Biostar GF8200C M2 | Setup Manual - Page 2
Raid Arrays 19 4.3 How RAID Works 19 Chapter 5: Useful Help 23 5.1 Driver Installation Note 23 5.2 Software 24 5.3 Extra Information 29 5.4 AMI BIOS Beep Code 31 5.5 Troubleshooting 32 Appendix: SPEC In Other Languages 34 German...34 French ...36 Italian...38 Spanish ...40 - Biostar GF8200C M2 | Setup Manual - Page 3
M2+ TE/GF8200C M2+ CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions ATX Case X 1 Installation Guide X 1 Fully Setup Driver CD X 1 (full version manual files inside) FDD Cable X - Biostar GF8200C M2 | Setup Manual - Page 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC Socket AM2+ AMD 64 Architecture enables 32 and 64 bit AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 CPU computing / Sempron / PhenomX3 processors Supports Hyper Transport 3.0 and PowerNow (Maximum Watt: 95W) Support HyperTransport 3.0 FSB - Biostar GF8200C M2 | Setup Manual - Page 5
-45 ethernet cable USB Port x4 Connect to USB devices Audio Jack x3 Provide Audio-In/Out and microphone connection Board Size 175 mm(W) x 245 mm(L) MicroATX Special RAID 0 / 1 / 5 / 0+1 support Features Hybrid SLI support (by nVIDIA driver) OS Support Windows XP / VISTA Biostar reserves - Biostar GF8200C M2 | Setup Manual - Page 6
Motherboard Manual 1.5 MOTHERBOARD LAYOUT JKBMS J ATXPW R2 J KB_PW R JATXPWR1 S ocket AM 2+ DVI VG A DIMMA1 DIMMB1 ID E JUSB1 JUS BPWR1 JUSBLAN1 J CFAN JAUDIO1 GeForce 8100/8200 JUSBPWR2 BAT1 LAN PEX16_1 JAU DIOF Codec JCOM J CDIN JPRNT PCI1 PCI2 FDD Note: ■ represents the 1st pin. - Biostar GF8200C M2 | Setup Manual - Page 7
GF8100 M2+ TE/GF8200C M2+ CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, - Biostar GF8200C M2 | Setup Manual - Page 8
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN. This completes the installation. Note: Please update the BIOS to the latest - Biostar GF8200C M2 | Setup Manual - Page 9
GF8100 M2+ TE/GF8200C M2+ 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN: CPU Fan Header Pin Assignment - Biostar GF8200C M2 | Setup Manual - Page 10
DIMMA1 DIMMB 1 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break - Biostar GF8200C M2 | Setup Manual - Page 11
B. Memory Capacity GF8100 M2+ TE/GF8200C M2+ DIMM Socket Location DDR2 Module Total Memory Size DIMMA1 DIMMB1 256MB/512MB/1GB/2GB/4GB Max is 8GB. 256MB/512MB/1GB/2GB/4GB C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet - Biostar GF8200C M2 | Setup Manual - Page 12
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cable. 2 34 1 33 IDE: IDE/ATAPI Connector - Biostar GF8200C M2 | Setup Manual - Page 13
GF8100 M2+ TE/GF8200C M2+ PEX16_1: PCI-Express Gen2 x16 Slot - PCI-Express 2.0 compliant. - Maximum theoretical realized bandwidth of 8GB/s simultaneously per direction, for an aggregate of 16GB/s totally. - PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. - 2X bandwidth over - Biostar GF8200C M2 | Setup Manual - Page 14
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the - Biostar GF8200C M2 | Setup Manual - Page 15
GF8100 M2+ TE/GF8200C M2+ JATXPWR1: ATX Power Source Connector This connector allows user +12V 12 +3.3V JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 32 41 Pin Assignment 1 +12V 2 +12V 3 Ground 4 Ground Note: Before power - Biostar GF8200C M2 | Setup Manual - Page 16
Motherboard Manual JUSB2~JUSB4: Headers for USB 2.0 Ports at Ground 8 Ground 9 NC 10 Key SATA1~SATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA 1 SATA3 SATA 2 SATA4 - Biostar GF8200C M2 | Setup Manual - Page 17
GF8100 M2+ TE/GF8200C M2+ JAUDIOF: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC'97 connector is not acceptable. 2 10 Pin Assignment 1 Mic Left in 2 Ground 3 Mic Right - Biostar GF8200C M2 | Setup Manual - Page 18
Motherboard Manual JCMOS: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 31 Pin 1-2 Close: Normal Operation (default). 31 31 Pin 2-3 Close: Clear CMOS - Biostar GF8200C M2 | Setup Manual - Page 19
GF8100 M2+ TE/GF8200C M2+ JPRNT: Printer Port Connector This header allows you to connect printer port on the PC. 2 1 25 Pin Assignment 1 -Strobe 2 -ALF 3 Data 0 4 -Error 5 Data 1 6 -Init 7 Data 2 8 - - Biostar GF8200C M2 | Setup Manual - Page 20
Motherboard Manual JUSBPWR1/JUSBPWR2: Power Source Headers for USB Ports Pin 1-2 Close: JUSBPWR1: +5V for USB ports at JUSB1/JUSBLAN1. JUSBPWR2: +5V for USB ports at front - Biostar GF8200C M2 | Setup Manual - Page 21
GF8100 M2+ TE/GF8200C M2+ CHAPTER 4: RAID FUNCTIONS 4.1 OPERATING SYSTEM Supports Windows XP Home/Professional Edition, and Windows Vista. 4.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many - Biostar GF8200C M2 | Setup Manual - Page 22
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across can be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits - Drives: Minimum 2, and - Biostar GF8200C M2 | Setup Manual - Page 23
GF8100 M2+ TE/GF8200C M2+ RAID 0+1: RAID 0 drives can be mirrored using RAID 1 techniques. Resulting in a RAID 0+1 solution for improved performance plus resiliency. Features and Benefits - Drives: Minimum 4, and maximum - Biostar GF8200C M2 | Setup Manual - Page 24
Motherboard Manual transaction processing and general purpose service. - Benefits: An ideal same as a single disk. Write performance can be CPU intensive. - Fault Tolerance: Yes. Disk 1 DATA Driver CD, or go to http://www.nvidia.com/object/IO_28159.html to download the NVIDIA RAID User's Guide. 22 - Biostar GF8200C M2 | Setup Manual - Page 25
/GF8200C M2+ CHAPTER 5: USEFUL HELP 5.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you insert the CD The setup guide - Biostar GF8200C M2 | Setup Manual - Page 26
Line" / "BIOS Update" appears on the desktop. Double-click the icon to launch the utility. eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you - Biostar GF8200C M2 | Setup Manual - Page 27
M2+ TE/GF8200C M2 motherboard/BIOS/CPU/ service. If you are not using Outlook Express as your default e-mail client application, you may need to save the system information to a .txt file and send the file to our tech support with other e-mail application. Go to the following web http://www.biostar - Biostar GF8200C M2 | Setup Manual - Page 28
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Online Update function (Only for AMI BIOS) Save current BIOS to - Biostar GF8200C M2 | Setup Manual - Page 29
GF8100 M2+ TE/GF8200C M2+ Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup - Biostar GF8200C M2 | Setup Manual - Page 30
Motherboard Manual (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Online Update button, the utility will search for the latest BIOS from - Biostar GF8200C M2 | Setup Manual - Page 31
GF8100 M2+ TE/GF8200C M2+ 5.3 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and - Biostar GF8200C M2 | Setup Manual - Page 32
chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while booting up. Updating BIOS with BIO-Flasher 1. Go to the website to download the latest BIOS file for the motherboard. 2. Then, save the BIOS file into a USB pen drive or a floppy disk. 3. Insert the USB pen - Biostar GF8200C M2 | Setup Manual - Page 33
video adapter) Troubleshooting POST BIOS Beep Codes Number of Beeps Troubleshooting Action 1, 3 Reseat the memory, or replace with known good modules. Fatal error indicating a serious problem with the system. Consult your system manufacturer. Before declaring the motherboard beyond all hope - Biostar GF8200C M2 | Setup Manual - Page 34
Motherboard Manual 5.5 TROUBLESHOOTING Probable Solution 1. There is no power in the system. 1. Make sure power cable is Power LED does not shine; the securely plugged in. fan of the power supply does not 2. Replace cable. work 3. Contact technical support Failure." Review system's - Biostar GF8200C M2 | Setup Manual - Page 35
GF8100 M2+ TE/GF8200C M2+ This page is intentionally left blank. 33 - Biostar GF8200C M2 | Setup Manual - Page 36
Motherboard Manual APPENDIX: SPEC IN OTHER LANGUAGES GERMAN Spezifikationen Sockel AM2+ Die AMD 64-Architektur unterstützt eine 32-Bit- und AMD Athlon 64 / Athlon 64 FX / Althlon 64 CPU 64-Bit-Datenverarbeitung X2 / Sempron / PhenomX3 Prozessoren Unterstützt Hyper Transport 3.0 und PowerNow - Biostar GF8200C M2 | Setup Manual - Page 37
GF8100 M2+ TE/GF8200C M2+ LAN-Anschluss x1 /A USB-Anschluss x4 Audioanschluss x3 DVI-Anschluss x1 Platinengröß 175 mm (B) X 245 mm (L) e Sonderfunkti Unterstützt RAID 0 / 1 / 5 / 0+1 onen Unterstützt Hybrid SLI (by nVIDIA driver) OS-Unterstü Windows XP / VISTA tzung Biostar - Biostar GF8200C M2 | Setup Manual - Page 38
Motherboard Manual FRENCH SPEC Socket AM2 Chipset GF8100 M2+ TE: GeForce 8100 GF8200C M2 (by AM2+ CPU) Chaque DIMM LAN Realtek RTL 8201CL PHY 10 / 100 Mb/s négociation automatique Half / Full duplex capability Prise en charge audio HD ALC662 Sortie audio à 5.1 voies Prise en charge de l'audio - Biostar GF8200C M2 | Setup Manual - Page 39
x1 panneau Port LAN x1 arrière Port USB x4 Fiche audio x3 Port DVI x1 Dimension s de la 175 mm (l) X 245 mm (H) carte Fonctionnal Prise en charge RAID 0 / 1 / 5 / 0+1 ités Prise en charge Hybrid SLI (by nVIDIA spéciales driver) Support SE Windows XP / VISTA Biostar se réserve le - Biostar GF8200C M2 | Setup Manual - Page 40
Motherboard Manual ITALIAN SPECIFICA CPU Socket AM2 larghezza di banda Chipset GF8100 M2+ TE: GeForce 8100 GF8200C M2+ : GeForce 8200 LAN Realtek RTL 8201CL PHY Negoziazione automatica 10 / 100 Mb/s Capacità Half / Full Duplex Supporto ALC662 audio HD Uscita audio 5.1 canali Supporto audio - Biostar GF8200C M2 | Setup Manual - Page 41
Porta VGA x1 pannello Porta LAN x1 posteriore Porta USB x4 Connettore audio x3 Porta DVI x1 Dimension 175 mm (larghezza) x 245 mm i scheda (altezza) Caratterist Supporto RAID 0 / 1 / 5 / 0+1 iche Supporto Hybrid SLI (by nVIDIA speciali driver) Sistemi Biostar si riserva il diritto - Biostar GF8200C M2 | Setup Manual - Page 42
64 / Athlon 64 64 bits CPU FX / Athlon 64 X2 / Sempron / PhenomX3 Soporta las tecnologías Hyper Transport 3.0 y (Vatio máximo: 95W) PowerNow Admite HyperTransport 3.0 con un ancho FSB de banda de hasta 5.2 GT/s Conjunto GF8100 M2+ TE: GeForce 8100 de chips GF8200C M2+ : GeForce 8200 ITE 8718 - Biostar GF8200C M2 | Setup Manual - Page 43
Puerto DVI X1 Tamaño de 175 mm. (A) X 245 Mm. (H) la placa Funciones Admite RAID 0 / 1 / 5 / 0+1 especiales Admite Hybrid SLI (by nVIDIA driver) Soporte de sistema Windows XP / VISTA operativo Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin aviso previo - Biostar GF8200C M2 | Setup Manual - Page 44
Motherboard Manual PORTUGUESE ESPECIFICAÇÕES Socket AM2+ A arquitectura AMD 64 permite uma computação de Processadores AMD Athlon 64 / Athlon 64 32 e 64 bits CPU FX / Althlon 64 X2 / Sempron / PhenomX3 Suporta as tecnologias Hyper Transport 3.0 e (Watt máximo: 95W) PowerNow Suporta a - Biostar GF8200C M2 | Setup Manual - Page 45
Característi Suporta as funções RAID 0 / 1 / 5 / 0+1 cas Suporta as funções Hybrid SLI (by nVIDIA especiais driver) Sistemas A Biostar reserva-se o direito de adicionar ou remover operativos Windows XP / VISTA suporte para qualquer sistema operativo com ou sem suportados aviso prévio. 43 - Biostar GF8200C M2 | Setup Manual - Page 46
Motherboard Manual POLISH SPEC Procesor Socket AM2 do 5.2 GT/s Chipset GF8100 M2+ TE: GeForce 8100 GF8200C M2+ : GeForce 8200 ze specyfikacją SATA w wersji 2.0. LAN Realtek RTL 8201CL PHY 10 / 100 ługa audio HD ALC662 5.1 kanałowe wyjście audio Obsługa High-Definition Audio Gniazdo - Biostar GF8200C M2 | Setup Manual - Page 47
x1 Back Panel Port LAN x1 I/O Port USB x4 Gniazdo audio x3 Port DVI x1 Wymiary płyty 175 mm (S) X 245 mm (W) Funkcje Obsługa RAID 0 / 1 / 5 / 0+1 specjalne Obsługa Hybrid SLI (by nVIDIA driver) Obsluga systemu Windows XP / VISTA operacyjne go Biostar zastrzega sobie prawo dodawania - Biostar GF8200C M2 | Setup Manual - Page 48
Motherboard Manual RUSSIAN СПЕЦ CPU AM2 AMD 64 AMD Athlon 64 / Athlon 64 на 32 и 64 бит FX / Althlon 64 X2 / Sempron / PhenomX3 Hyper Transport 3.0 и PowerNow 95W) HyperTransport 3.0 с FSB 5.2 GT/s Набор GF8100 M2+ TE: GeForce 8100 GF8200C M2+ : GeForce 8200 Слоты DDR2 - Biostar GF8200C M2 | Setup Manual - Page 49
1 x1 x1 PS/2 x1 Мышь PS/2 x1 Задняя Порт VGA x1 панель Порт LAN x1 USB-порт x4 ода x3 Порт DVI x1 175 мм (Ш) X 245 мм (В) ые RAID 0 / 1 / 5 / 0+1 ие Hybrid SLI (by nVIDIA driver) стики Windows XP / VISTA а OS Biostar OS 47 - Biostar GF8200C M2 | Setup Manual - Page 50
Motherboard Manual ARABIC AM2 AMD Athlon 64 / Athlon 64 FX / Sempron 32و 64ﺑﺖAMD 64 PowerNowو Hyper Transport 3.0 PhenomX3 / Althlon 64 X2 )و: 95 5.2 GT/s HyperTransport 3.0 GF8100 M2+ TE: GeForce 8100 GF8200C M2+ : GeForce 8200 - Biostar GF8200C M2 | Setup Manual - Page 51
SATA Smart Fan USB Biostar GF8100 M2+ TE/GF8200C M2+ 4 SATA 1 1 1 CD-IN 1 1 USB ﻋﺪ3 1 DVI 175 245 X RAID 0 / 1 / 5 / 0+1 Hybrid SLI (by nVIDIA driver Windows XP / VISTA 49 - Biostar GF8200C M2 | Setup Manual - Page 52
Motherboard Manual JAPANESE 仕様 Socket AM2+ AMD 64 32ビットと64 AMD Athlon 64 / Athlon 64 FX / Althlon 64 能です CPU X2 / Sempron / PhenomX3 3.0 95W) 5.2 GT/s FSB ート3.0 GF8100 M2+ TE: GeForce 8100 ト GF8200C M2+ : GeForce 8200 DDR2 DIMM x 2 8GB DDR2 DDR2 533 / 667 / 800 リ - Biostar GF8200C M2 | Setup Manual - Page 53
2 USB x3 ます 24ピン) x1 4ピン) x1 x1 1 x1 PS/2 x1 PS/2マウス x1 VGAポート x1 LANポート x1 I/O USBポート x4 x3 DVIポート x1 175 mm (幅) X 245 mm (高さ) 特殊機能 RAID 0 / 1 / 5 / 0+1 Hybrid SLI by nVIDIA driver) OS Windows XP / VISTA Biostar OS 2009/03/11 51
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
GF8100 M2+ TE/GF8200C M2+ Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.