Biostar M7VIT 800 V7.X M7VIT 800 user's manual

Biostar M7VIT 800 V7.X Manual

Biostar M7VIT 800 V7.X manual content summary:

  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 1
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee vendor's approval in writing. The content of this user's manual is subject to be changed without notice and we will not be responsible for any mistakes
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 2
    CPU Installation 6 DDR DIMM Modules: DDR1, DDR2 7 Installing DDR Module 7 Jumpers, Headers, Connectors & Slots 8 FRANÇAIS 13 Caractéristiques de M7VIT 800 13 Contenu de l'Emballage 14 WARPSPEEDER 15 Introduction 15 System Requirement 15 Installation 16 Usage ...17 TROUBLE SHOOTING 25 ii
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 3
    MM77VVIITT 880000 Layout of M7VIT 800 NOTE: ●represents the first pin. 1
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 4
    MM77VVIITT 880000 Component Index A. Back Panel Connector J. Floppy Disk Connector:FDD1 B. ATX Power Connector:ATX1 K. Case Open Connector:JCI1 C. CD-ROM Audio-In Header:JCDIN1 L. System FAN Header:JSFAN1 D. Digital Audio Connector:JSPDIF1 M. Serial ATA Connectors:JSATA1-2* E. Front Audio
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 5
    MM77VVIITT 880000 M7VIT 800 System Structure 3
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 6
    MM77VVIITT 880000 English M7VIT Bravo Features A. Hardware CPU Provides Socket A. Supports single AMD® Athlon XP/ Duron Family processor. Front Side Bus at 200/266/333/400 MHz. Chipset North Bridge: VIA KT600. South Bridge: VIA VT8237. Main Memory Supports up to 2 DDR devices. Supports 266/333/400
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 7
    APM1.2. Supports ACPI. Supports USB Function. Software Supports Warpspeeder™, 9th Touch™, FLASHER™. Offers the highest performance for Windows 98 SE, Windows 2000, Windows Me, Windows XP, UNIX Series etc. Package contents HDD Cable X 1 FDD Cable X 1 User's Manual X 1 Fully Setup Driver CD X 1 USB
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 8
    MM77VVIITT 880000 How to set up Jumper The illustration shows how to set up a jumper. When the Jumper cap is placed on pins, the jumper is "close". If no jumper cap is placed on the pins, the jumper is "open". The illustration shows a 3-pin jumper whose pin 1 and 2 are "close" when jumper cap is
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 9
    MM77VVIITT 880000 CPU Fan Header: JCFAN1 1 Pin 1 JCFAN1 2 3 Assignment Ground +12V FAN RPM rate Sense System Fan Header: JSFAN1 1 Pin 1 JSFAN1 2 3 Assignment Ground +12V FAN RPM rate Sense DDR DIMM Modules: DDR1, DDR2 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 266 MHz (PC2100)/
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 10
    . This PCI slot is designated as 32 bits. Accelerated Graphics Port Slot: AGP1 Your monitor will attach directly to that video card. This motherboard supports video cards for PCI slots, but it is also equipped with an Accelerated Graphics Port (AGP). An AGP card will take advantage of AGP technology
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 11
    MM77VVIITT 880000 Front Panel Connector: JPANEL1 JPANEL1 PWR_ LED SLP ON/ OFF 2 1 SPK (+ ) (-) HLED RST IR 24 23 IR Pin Assignment 1 +5V 3 NA 5 NA 7 Speaker 9 HDD LED (+) 11 HDD LED (-) 13 Ground 15 Reset Control 17 NA 19 NA 21 +5V 23 IRTX Function Speaker Connector
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 12
    MM77VVIITT 880000 Clear CMOS Jumper: JCMOS1 JCMOS1 13 Pin 1-2 Close 13 Pin 2-3 Close Assignment Normal Operation (default) Clear CMOS Data ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5.
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 13
    MM77VVIITT 880000 Front Panel Audio Header: JAUDIO1 2 14 1 13 JAUDIO1 Pin Assignment Pin Assignment 1 Left stereo Mic In/ Center 2 Ground 3 Right stereo Mic In/ Bass 4 Audio Power 5 Right Line Out/ Speaker Out 6 Right Line Out/ Speaker Out Right Right 7 Reserved 8 Key 9 Left
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 14
    MM77VVIITT 880000 Back Panel Connectors LAN Printer Port PS/2 PS/2 COM1 Keyboard Mouse USB USB Line In Speaker Out Mic In 6 Channel Speakers Speaker Out/ Right & Left Line In/ Rear Speaker (Left & Right) Mic In/ Center & Bass 12
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 15
    MM77VVIITT 880000 Français Caractéristiques de M7VIT 800 A. Matériel Processeur Avec socket A. Prise en charge du processeur AMD® Athlon XP/Duron Family. Bus frontal à 200/266/333/400 MHz. Jeu de puces
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 16
    MM77VVIITT 880000 Prise en charge de 6 canaux. Prise en charge de la microphone stereo. Périphériques intégrés a. Côté arrière 1 port série. 1 port parallèle (mode SPP/EPP/ECP) 1 port audio en position verticale. 1 RJ-45 LAN Jack. Souris PS/2 et clavier PS/2. 4 ports USB2.0. b. Côté frontal 1 port
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 17
    automatically rebooting the computer and then restart to a speed that is either the original system speed or a suitable one. System Requirement OS Support: Windows 98 SE, Windows Me, Windows 2000, Windows XP DirectX: DirectX 8.1 or above. (The Windows XP operating system includes DirectX 8.1. If you
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 18
    MM77VVIITT 880000 Installation 1. Execute the setup execution file, and then the following dialog will pop up. Please click "Next" button and follow the default procedure to install. 2. When you see the following dialog
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 19
    MM77VVIITT 880000 Usage The following figures are just only for reference, the screen printed in this user manual will change according to your motherboard on hand. [WarpSpeeder™] includes 1 tray icon and 5 panels: 1. Tray Icon: Whenever the Tray Icon utility is launched, it will
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 20
    MM77VVIITT 880000 This utility is responsible for conveniently invoking [WarpSpeeder™] Utility. You can use the mouse by clicking the left button in order to invoke [WarpSpeeder™] directly from the little tray icon or you can right-click the little tray icon to pop up a popup menu as following
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 21
    MM77VVIITT 880000 3. Voltage Panel Click the Voltage button in Main Panel, the button will be highlighted and the Voltage Panel will slide out to up as the following figure. In this panel, you can decide to increase CPU core voltage and Memory voltage or not. The default setting is "No". If you want
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 22
    MM77VVIITT 880000 4. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure. 20
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 23
    3MHz button", "-1MHz button", "+1MHz button", and "+3MHz button": provide user the ability to do real-time overclock adjustment. Warning: Manually overclock is potentially dangerous, especially when the overclocking percentage is over 110 %. We strongly recommend you verify every speed you overclock
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 24
    MM77VVIITT 880000 d. "Auto-overclock button": User can click this button and [ WarpSpeeder™ ] will set the best and stable performance and frequency automatically. [ WarpSpeeder™ ] utility will execute a series of testing until system fail. Then system will do fail-safe reboot by using Watchdog
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 25
    MM77VVIITT 880000 5. Hardware Monitor Panel Click the Hardware Monitor button in Main Panel, the button will be highlighted and the Hardware Monitor panel will slide out to left as the following figure. In this panel, you can get the real-time status information of your system. The information will
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 26
    MM77VVIITT 880000 Note: Because the overclock, overvoltage, and hardware monitor features are controlled by several separate chipset, [ WarpSpeeder™ ] divide these features to separate panels. If one chipset is not on board, the correlative button in Main panel will be disabled, but will not
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 27
    Trouble Shooting PROBABLE SOLUTION No power to the system at all Power light don't * Make sure power cable is securely plugged in illuminate, fan inside power supply does not turn on. Indicator light on keyboard does not turn on * Replace cable * Contact technical support applications files.
  • Biostar M7VIT 800 V7.X | M7VIT 800 user's manual - Page 28
    MM77VVIITT 880000 03/19/2004 26
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

M
M
7
7
V
V
I
I
T
T
8
8
0
0
0
0
i
FCC I
FCC I
FCC I
FCC Information
formation
formation
formation and Copyright
and Copyright
and Copyright
and Copyright
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. There is no guarantee that interference will not occur in
a particular installation.
The vendor makes no representations or warranties with respect to the
contents here of and specially disclaims any implied
warranties
of
merchantability or fitness for any purpose. Further the vendor reserves
the right to revise this publication and to make changes to the contents
here of without obligation to notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without
first obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice
and we will not be responsible for any mistakes found in this user’s
manual. All the brand and product names are trademarks of their
respective companies.