Biostar P31-A7 Setup Manual

Biostar P31-A7 Manual

Biostar P31-A7 manual content summary:

  • Biostar P31-A7 | Setup Manual - Page 1
    P31-A7 Setup Manual FCC Information and Copyright This equipment has been tested and found to can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will
  • Biostar P31-A7 | Setup Manual - Page 2
    System Memory 8 2.4 Connectors and Slots 10 Chapter 3: Headers & Jumpers Setup 12 3.1 How to Setup Jumpers 12 3.2 Detail Settings 12 Chapter 4: Useful Help 18 4.1 Driver Installation Note 18 4.2 Award BIOS Beep Code 19 4.3 Extra Information 19 4.4 Troubleshooting 20 Appendencies: SPEC In
  • Biostar P31-A7 | Setup Manual - Page 3
    P31-A7 CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions X 1 Rear I/O Panel for ATX Case X 1 User's Manual X 1 Fully Setup Driver CD X 1 FDD Cable X 1 (optional) USB 2.0 Cable
  • Biostar P31-A7 | Setup Manual - Page 4
    Motherboard Manual 1.3 MOTHERBOARD FEATURES SPEC LGA 775 Supports Hyper-Threading / Execute Disable Bit / Intel Core2Duo / Core2Quad / Celeron 4xx Enhanced Intel SpeedStep® / Intel Architecture-64 / CPU / Pentium D / Pentium 4 / Celeron D Extended Memory 64 Technology / Virtualization
  • Biostar P31-A7 | Setup Manual - Page 5
    connector CPU Fan header System Fan header Clear CMOS header USB connector Power Connector (24pin) Power Connector (4pin) PS/2 Keyboard PS/2 Mouse Back Panel Serial Port I/O LAN port USB Port Audio Jack Board Size 190 (W) x 305 (L) mm OS Support Windows 2000 / XP / VISTA P31-A7 SPEC
  • Biostar P31-A7 | Setup Manual - Page 6
    Motherboard Manual 1.5 MOTHERBOARD LAYOUT JKBMS1 LGA775 JCFAN1 JCOM1 JATXPWR1 CPU1 DDR2_A1 DDR2_B1 JUSBV1 JUSB1 JRJ45USB1 JATXPWR2 JAUDIO2 Intel P31 JAUDIOF1 JCDIN1 LAN JSPDIF_OUT1 PEX16_1 Super I/O PEX1_1 JCMOS1 PEX1_2 BAT1 BIOS PCI1 Intel ICH7 SATA1 SATA3 CODEC JPRNT1 PCI2
  • Biostar P31-A7 | Setup Manual - Page 7
    P31-A7 CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Special Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won't be damaged. Pin Cap Step 1: Pull
  • Biostar P31-A7 | Setup Manual - Page 8
    Motherboard Manual Step 2: Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge. The CPU will fit only in the correct orientation. Step 2-1: Step 2-2: Step 3: Hold the CPU down firmly, and then lower the lever to locked position to
  • Biostar P31-A7 | Setup Manual - Page 9
    P31-A7 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header 4 Pin Assignment 1 1
  • Biostar P31-A7 | Setup Manual - Page 10
    DDR2_A1 DDR2_B1 Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY A. Memory Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break
  • Biostar P31-A7 | Setup Manual - Page 11
    B. Memory Capacity P31-A7 DIMM Socket Location DDR2_A1 DDR2_B1 DDR Module 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB Total Memory Size Max is 4B. C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements:
  • Biostar P31-A7 | Setup Manual - Page 12
    Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 IDE1: Hard Disk
  • Biostar P31-A7 | Setup Manual - Page 13
    P31-A7 PEX16_1: PCI-Express x16 per direction, for an aggregate of 500MB/s totally. - PCI-Express supports a raw bit-rate of 2.5GB/s on the data pins. - PEX16_1 PEX1_1 PEX1_2 PCI1~PCI3: Peripheral Component Interconnect Slots This motherboard is equipped with 3 standard PCI slots. PCI stands for
  • Biostar P31-A7 | Setup Manual - Page 14
    Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the
  • Biostar P31-A7 | Setup Manual - Page 15
    P31-A7 JATXPWR2: ATX Power Source Connector This connector allows user to connect 24-pin power connector +12V 12 +3.3V JATXPWR1: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 32 4 1 Pin Assignment 1 +12V 2 +12V 3 Ground 4 Ground 13
  • Biostar P31-A7 | Setup Manual - Page 16
    Motherboard Manual JUSB3/JUSB4: Headers for USB 2.0 Ports at Front Panel This Sense 7 Front Sense 8 Key 9 Left line in 10 Jack Sense JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI
  • Biostar P31-A7 | Setup Manual - Page 17
    P31-A7 JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 13 Pin 1-2 Close: Normal Operation (default). 13 13 Pin 2-3 Close: Clear CMOS data. ※
  • Biostar P31-A7 | Setup Manual - Page 18
    Motherboard Manual JSPDIF_OUT1: Digital Audio-out Connector (Optional) This connector allows user to connect the PCI 1 3 1 3 Pin 1-2 close JUSBV2 13 1 3 Pin 2-3 close Note: In order to support this function "Power-On system via USB device," "JUSBV1/ JUSBV2" jumper cap should be placed on Pin
  • Biostar P31-A7 | Setup Manual - Page 19
    JPRNT1: Printer Port Connector This header allows you to connector printer on the PC. P31-A7 2 1 Pin Assignment 1 -Strobe 2 -ALF 3 Data 0 4 -Error 5 Data 1 6 -Init 7 Data 2 8 -Scltin 9 Data 3 10 Ground 11 Data 4 12 Ground 13 Data 5 25 Pin Assignment 14 Ground 15
  • Biostar P31-A7 | Setup Manual - Page 20
    for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn't show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under
  • Biostar P31-A7 | Setup Manual - Page 21
    P31-A7 4.2 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short Video card not found or video card beeps memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps every
  • Biostar P31-A7 | Setup Manual - Page 22
    Motherboard Manual 4.4 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support Failure." Review system's
  • Biostar P31-A7 | Setup Manual - Page 23
    P31-A7 This page is intentionally left blank. 21
  • Biostar P31-A7 | Setup Manual - Page 24
    Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Spezifikationen LGA 775 Unterstützt Hyper-Threading / Execute Disable Bit / Intel Core2Duo / Core2Quad / Celeron 4xx Enhanced Intel SpeedStep® / Intel Architecture-64 / CPU / Pentium 4 / Pentium D / Celeron D Extended Memory 64
  • Biostar P31-A7 | Setup Manual - Page 25
    üsse x1 x1 PS/2-Tastatur x1 PS/2-Maus x1 Rückseiten-E Serieller Anschluss x1 /A LAN-Anschluss x1 USB-Anschluss x4 Audioanschluss x3 Platinengröße 190 mm (B) X 305 mm (L) OS-Unterstüt Windows 2000 / XP / VISTA zung Biostar behält sich das Recht vor, ohne Ankündigung die Unterstützung
  • Biostar P31-A7 | Setup Manual - Page 26
    Motherboard Manual FRANCE SPEC LGA 775 Intel P31 Intel DDR2 533 (w. FSB 533/1066 CPU) de 256Mo / 512Mo / 1Go LAN Realtek RTL 8111C / RTL 8101E(optional) uniquement) Half / Full duplex capability Prise en charge ALC662 audio HD Prise en charge de l'audio haute définition Sortie audio
  • Biostar P31-A7 | Setup Manual - Page 27
    P31-A7 SPEC Connecteur de disquette Chaque connector prend en charge 2 panneau Port LAN x1 arrière Port USB x4 Fiche audio x3 Dimensions 190 mm (l) X 305 mm (H) de la carte Support SE Windows 2000 / XP / VISTA Biostar se réserve le droit d'ajouter ou de supprimer le support de SE
  • Biostar P31-A7 | Setup Manual - Page 28
    Motherboard Manual ITALIAN SPECIFICA LGA 775 Supporto di Hyper-Threading / Execute Disable CPU Processore Intel Core2Duo / Bit / Enhanced Intel SpeedStep® / Architettura Core2Quad / Celeron 4xx / Pentium 4 Intel 64 / Tecnologia Extended Memory 64 / / Pentium D / Celeron D Tecnologia
  • Biostar P31-A7 | Setup Manual - Page 29
    P31-A7 SPECIFICA Connettore floppy x1 Ciascun connettore supporta 2 unità Floppy Connettore x1 pannello Porta LAN x1 posteriore Porta USB x4 Connettore audio x3 Dimension 190 mm (larghezza) x 305 mm i scheda (altezza) Sistemi operativi Windows 2000 / XP / VISTA Biostar si riserva il
  • Biostar P31-A7 | Setup Manual - Page 30
    Motherboard Manual SPANISH Especificación LGA 775 Admite Hyper-Threading / Bit de deshabilitación de Procesador Intel Core2Duo / Core2Quad / ejecución / Intel SpeedStep® Mejorado / Intel CPU Celeron 4xx / Pentium 4 / Pentium D / Architecture-64 / Tecnología Extended Memory 64 / Celeron D
  • Biostar P31-A7 | Setup Manual - Page 31
    P31-A7 de ventilador de CPU en placa X1 Soporta función de salida de sonido digital X1 Fuente de alimentación de ventilador de CPU (con funci (A) X 305 Mm. (H) la placa Soporte de sistema Windows 2000 / XP / VISTA operativo Biostar se reserva el derecho de añadir o retirar el soporte de cualquier
  • Biostar P31-A7 | Setup Manual - Page 32
    Motherboard Manual PORTUGUESE ESPECIFICAÇÕES LGA 775 Suporta as tecnologias Hyper-Threading / Execute Processador Intel Core2Duo / CPU Disable Bit / Enhanced Intel SpeedStep® / Intel Core2Quad / Celeron 4xx / Pentium 4 / Arquitecture -64 / Extended Memory 64 / Virtualization Pentium D /
  • Biostar P31-A7 | Setup Manual - Page 33
    P31-A7 Conector da ventoinha da CPU x1 na placa Conector da ventoinha do sistema x1 Alimentação da ventoinha da CPU (com a função LAN x1 traseiro Porta USB x4 Tomada de áudio x3 Tamanho da placa 190 mm (L) X 305 mm (A) Sistemas operativos Windows 2000 / XP / VISTA suportados A Biostar
  • Biostar P31-A7 | Setup Manual - Page 34
    Motherboard Manual POLISH SPEC LGA 775 Obsługa Hyper-Threading / Execute Disable Bit / Procesor Procesor Intel Core2Duo / Core2Quad / Enhanced Intel SpeedStep® / Intel Architecture-64 / Celeron 4xx / Pentium 4 / Pentium D / Extended Memory 64 Technology / Virtualization Celeron D Technology
  • Biostar P31-A7 | Setup Manual - Page 35
    P31-A7 SPEC Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napędy dyskietek Port szeregowy x1 I/O Port LAN x1 Port USB x4 Gniazdo audio x3 Wymiary płyty 190 mm (S) X 305 mm (W) Obsluga systemu Windows 2000 / XP / VISTA operacyjne go Biostar zastrzega sobie prawo dodawania lub
  • Biostar P31-A7 | Setup Manual - Page 36
    Motherboard Manual RUSSIAN СПЕЦ CPU LGA 775 Hyper-Threading / Execute Intel Core2Duo / Core2Quad / Disable Bit / Enhanced Intel SpeedStep® / Intel ый Celeron 4xx / Pentium 4 / Pentium D / Architecture-64 / Extended Memory 64 Technology / Celeron D FSB 533 / 800 / 1066 / 1333 МГц
  • Biostar P31-A7 | Setup Manual - Page 37
    x1 CD x1 CD S/PDIF x1 x1 x1 CMOS x1 USB 2 USB x2 24 вывод) x1 4 вывод) x1 PS/2 x1 PS/2 x1 x1 LAN x1 USB-порт x4 ода x3 190 мм (Ш) X 305 мм (В) Windows 2000 / XP / VISTA OS Biostar OS 35
  • Biostar P31-A7 | Setup Manual - Page 38
    ‫‪Motherboard Manual‬‬ ‫‪ARABIC‬‬ ‫‪Hyper-Threading / Execute Disable Bit ‫‪LGA 775‬‬ ‫‪Enhanced Intel SpeedStep® / Intel Architecture-64 /‬‬ ‫‪Intel Core2Duo / Core2Quad ‫‪Extended Memory 64 Technology / Virtualization Celeron 4xx / Pentium 4 / Pentium D /‬‬ ‫‪Technology‬‬ Celeron
  • Biostar P31-A7 | Setup Manual - Page 39
    ‫‪P31-A7‬‬ 1‬‬ 1‬‬ ‫‪IDE 1‬‬ ‫‪SATA 4‬‬ 1‬‬ 1‬‬ 1‬‬ 1‬‬ ‫‪Smart Fan 1‬‬ 1‬‬ 1‬‬ PS/2‬‬ 1‬‬ PS/2‬‬ 1‬‬ 1‬‬ 4‬‬ USB‬‬ 3‬‬ ‫‪ 190 305 X Biostar Windows 2000 / XP / VISTA‬‬ ‫‪37‬‬
  • Biostar P31-A7 | Setup Manual - Page 40
    Motherboard Manual JAPANESE 仕様 LGA 775 Hyper-Threading / Execute Disable Bit / Enhanced Intel Intel Core2Duo / Core2Quad / Celeron 4xx SpeedStep® / Intel Architecture-64 / Extended CPU / Pentium 4 / Pentium D / Celeron D Memory 64 Technology / Virtualization Technologyをサ processor FSB
  • Biostar P31-A7 | Setup Manual - Page 41
    CMOS USBコネクタ 24ピン) 4ピン) PS/2 PS/2マウス I/O LANポート USBポート 190 mm (幅) X 305 mm (高さ) OS Windows 2000 / XP / VISTA P31-A7 仕様 x1 2 x1 1 x1 2つのIDE x4 1つのSATA x1 x1 x1 CD x1 x1 CPU x1 x1 2 USB x2 ます x1 x1 x1 x1 x1 x1 x4 x3 Biostar OS 2007/11/20 39
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41

P31-A7 Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.