Biostar TA790GX A2 Setup Manual
Biostar TA790GX A2 Manual
 |
View all Biostar TA790GX A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TA790GX A2 manual content summary:
- Biostar TA790GX A2 | Setup Manual - Page 1
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Setup Manual FCC Information and Copyright This equipment has been tested radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference - Biostar TA790GX A2 | Setup Manual - Page 2
25 5.3 How RAID Works 25 Chapter 6: T-Series BIOS & Software 29 6.1 T-Series BIOS 29 6.2 T-Series Software 37 Chapter 7: Useful Help 47 7.1 Driver Installation Note 47 7.2 Extra Information 48 7.3 AMI BIOS Beep Code 49 7.4 Troubleshooting 50 Appendix: SPEC In Other Language - Biostar TA790GX A2 | Setup Manual - Page 3
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: „ Prepare a dry and stable working environment with sufficient lighting. „ Always - Biostar TA790GX A2 | Setup Manual - Page 4
AM2+ CPU) Max Memory Capicity 16GB Registered DIMM and ECC DIMM is not supported Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Graphics Radeon HD 3300 Max Shared Video Memory is 512MB DX10/UVD/HDCP support (Hybrid) CrossFireX support (by ATI driver - Biostar TA790GX A2 | Setup Manual - Page 5
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M SPEC Floppy connector x1 Each connector supports 2 Floppy drives Printer Port connector x1 Each connector supports 1 Printer port IDE Connector x1 Each connector supports 2 IDE device SATA Connector x6 Each connector supports 1 SATA devices Front - Biostar TA790GX A2 | Setup Manual - Page 6
Motherboard Manual 1.4 REAR PANEL CONNECTORS X PS/2 Mouse Port Y PS/2 Keyboard Port Z HDMI Port The High-Definition Multimedia Interface (HDMI) is an all-digital audio/video interface capable of transmitting uncompressed streams to an AV receiver or any compatible digital audio and/or video - Biostar TA790GX A2 | Setup Manual - Page 7
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 1.5 MOTHERBOARD LAYOUT JKBMS1 JATXPWR3 JCFAN1 JHDMI1 JATXPWR2 Socket AM2+ DVI VGA DIMMA1 DIMMB1 DIMMA2 DIMMB2 JUSB1 JUSBLAN1 IDE1 JUSBV2 JUSB5 JUSB 3 JSFAN1 J USB4 Note: ■ represents the 1st pin. BIOS JCMOS1 SATA1 FDD1 JPANEL1 RSTSW1 PWRSW1 5 - Biostar TA790GX A2 | Setup Manual - Page 8
Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. - Biostar TA790GX A2 | Setup Manual - Page 9
A2+/TA790GX A2+ SE/TA790GX 128M Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. Note: Please update the BIOS - Biostar TA790GX A2 | Setup Manual - Page 10
Motherboard Manual 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header 1 4 Pin - Biostar TA790GX A2 | Setup Manual - Page 11
DIMMA 1 DIMMB 1 DIMMA 2 DIMMB 2 TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 2.3 INSTALLING SYSTEM MEMORY A. DDR2 Modules 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the - Biostar TA790GX A2 | Setup Manual - Page 12
Motherboard Manual B. Memory Capacity DIMM Socket Location DIMMA1 DIMMB1 DIMMA2 DIMMB2 DDR2 Module 256MB/512MB/1GB/2GB/4GB 256MB/512MB/1GB/2GB/4GB 256MB/512MB/1GB/2GB/4GB 256MB/512MB/1GB/2GB/4GB Total Memory Size Max is 16GB. C. Dual Channel Memory installation To trigger the Dual Channel - Biostar TA790GX A2 | Setup Manual - Page 13
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 2 34 1 33 - Biostar TA790GX A2 | Setup Manual - Page 14
totally. (Without DCCFX-P2 in PEX16_2 or using CrossFireX) - PEX16_1 slot is reserved for graphics or video cards. The design of this motherboard supports dual PCI-Express graphics cards using CrossFireX technology with multiple displays. When using CrossFireX, this slot is master and runs with x8 - Biostar TA790GX A2 | Setup Manual - Page 15
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M PEX1_1/PEX1_2: PCI-Express Gen2 x1 Slots - PCI-Express 2.0 compliant. - Data transfer bandwidth up to 500MB/s per direction; 1GB/s in total. - PCI-Express Gen2 supports a raw bit-rate of 5.0Gb/s on the data pins. - 2X bandwidth over the PCI-Express 1.1 - Biostar TA790GX A2 | Setup Manual - Page 16
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The closed 3.2 DETAIL SETTINGS Pin1-2 closed JPANEL1: Front Panel Header This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and speaker connection. It allows user to connect the PC case's front panel - Biostar TA790GX A2 | Setup Manual - Page 17
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M JATXPWR2: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. 12 24 1 13 Pin Assignment 13 +3.3V 14 -12V 15 Ground 16 PS_ON 17 Ground 18 Ground 19 Ground 20 NC 21 +5V 22 + - Biostar TA790GX A2 | Setup Manual - Page 18
Motherboard Manual JATXPWR1: Auxiliary Power for Graphics This connector is an auxiliary power connection for graphics cards. Exclusive power for the graphics card provides better graphics performance. Pin Assignment 1 +12V 1 4 2 Ground 3 Ground 4 VCC JCMOS1: Clear CMOS Header By placing the - Biostar TA790GX A2 | Setup Manual - Page 19
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M SATA1~SATA3: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 6 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. SATA1 SATA2 SATA3 JUSB3~JUSB5: Headers for USB 2.0 Ports at Front Panel This - Biostar TA790GX A2 | Setup Manual - Page 20
Motherboard Manual JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header allows only HD audio front panel connector; AC'97 connector is not acceptable. 2 10 Pin Assignment 1 Mic Left in 2 Ground 3 Mic Right in 4 - Biostar TA790GX A2 | Setup Manual - Page 21
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M JCDIN1: CD-ROM Audio-in Connector This connector allows user to connect the audio source from the variaty devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc. 14 Pin Assignment 1 Left Channel Input 2 Ground 3 Ground 4 Right Channel - Biostar TA790GX A2 | Setup Manual - Page 22
Motherboard Manual JCOM1: Serial port Connector The motherboard has a Serial Port Connector for connecting RS-232 Port. 2 10 Pin Assignment 1 Carrier detect 2 Received data 3 Transmitted data 4 Data terminal ready 5 Signal ground 6 Data set - Biostar TA790GX A2 | Setup Manual - Page 23
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M On-Board LED Indicators There are 2 LED indicators on the motherboard to show system status. LED_D1 LED_D2 LED_D1 and LED_D2: These 2 LED indicate system power on diagnostics. Please refer to the table below for different messages: LED_D2 OFF OFF ON ON - Biostar TA790GX A2 | Setup Manual - Page 24
FUNCTION 4.1 CROSSFIREX REQUIREMENTS Only Windows XP/Vista supports CrossFireX (Dual Video) function. A pair of graphics cards with Radeon HD3650/HD3850/HD3870/HD4850/ HD4870 GPU. The graphics card driver should support CrossFireX technology. The power supply unit must provide at least the minimum - Biostar TA790GX A2 | Setup Manual - Page 25
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 4.3 HYBRID CROSSFIREX REQUIREMENTS Only Windows Vista supports Hybrid CrossFireX function. A graphics card with Radeon HD3450/HD3470 GPU. The graphics card driver should support Hybrid CrossFireX technology. The power supply unit must provide at least the - Biostar TA790GX A2 | Setup Manual - Page 26
Motherboard Manual 4.5 OPERATION MODES SUPPORTING LIST Operation Mode Single Card Model Radeon HD3650 O Radeon HD3850 O Radeon HD3870 O Radeon HD4850 O Radeon HD4870 O Radeon HD3450 O Radeon HD3470 O Radeon HD3870X2 O CrossFireX Hybrid CrossFireX O X O X O X O X O X X - Biostar TA790GX A2 | Setup Manual - Page 27
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M CHAPTER 5: RAID FUNCTIONS 5.1 OPERATION SYSTEM Supports Windows XP and Windows VISTA. 5.2 RAID ARRAYS RAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for many applications. - Biostar TA790GX A2 | Setup Manual - Page 28
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the active - Biostar TA790GX A2 | Setup Manual - Page 29
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M RAID 1+0: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 1+0 solution for improved performance, allowing for automatic redundancy. May be simultaneously used with other RAID levels in an array, and allows for spare disks. Drawbacks - Biostar TA790GX A2 | Setup Manual - Page 30
Motherboard Manual RAID 5: RAID 5 stripes both data and parity service. Benefits: An ideal combination of good performance, good fault tolerance, and high capacity and storage efficiency. Drawbacks: Individual block data transfer rate same as a single disk. Write performance can be CPU - Biostar TA790GX A2 | Setup Manual - Page 31
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M CHAPTER 6: T-SERIES BIOS & SOFTWARE 6.1 T-SERIES BIOS T-Series BIOS Features Overclocking Navigator Engine (O.N.E.) Memory Integration Test (M.I.T., under Overclock Navigator Engine) BIO-Flasher: Update BIOS file from USB Flash Drive or FDD Self Recovery - Biostar TA790GX A2 | Setup Manual - Page 32
may cause system to malfunction. OverClock Navigator [Manual OverClock] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System CPU Over Voltage [StartUp] Memory Over Voltage [1.95V] Chipset Over Voltage [1.15V] HT Over - Biostar TA790GX A2 | Setup Manual - Page 33
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M CPU Frequency CPU Frequency is directly in proportion to system performance. To maintain the system stability, CPU voltage needs to be increased also when raising CPU frequency. CPU FID/VID Control Enter this function for more advanced CPU settings. DRAM - Biostar TA790GX A2 | Setup Manual - Page 34
may cause system to malfunction. OverClock Navigator [Automate OverClock] =========== Automate OverClock System =========== Auto OverClock System [V12-Tech Engine] Manual OverClock System CPU Over Voltage [StartUp] Memory Over Voltage [1.95V] Chipset Over Voltage [1.15V] HT Over - Biostar TA790GX A2 | Setup Manual - Page 35
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Notices: Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under "Overclocking Navigator Engine" item. MIT allows users to test - Biostar TA790GX A2 | Setup Manual - Page 36
Motherboard Manual C. BIO-Flasher BIO-Flasher is a BIOS flashing utility providing you an easy and simple way to update your BIOS via USB pen drive or floppy disk. The BIO-Flasher is built in the BIOS chip. To enter the utility, press during the Power-On Self Tests (POST) procedure while - Biostar TA790GX A2 | Setup Manual - Page 37
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M D. Self Recovery System (S.R.S.) This function can't be seen under BIOS setup; and is always on whenever the system starts up. However, it can prevent system hang-up due to inappropriate overclock actions. When the system hangs up, S.R.S. will automatically - Biostar TA790GX A2 | Setup Manual - Page 38
Motherboard Manual Smart Fan Calibration Choose this item and then the BIOS will automatically test and detect the CPU/System fan functions and show CPU/System fan speed. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) If the CPU BIOS SETUP UTILITY Boot Chipset - Biostar TA790GX A2 | Setup Manual - Page 39
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 6.2 T-SERIES SOFTWARE Installing T-Series Software 1. Insert the Setup CD to the optical drive. The drivers installation program would appear if the Auto-run function has been enabled. 2. Select Software Installation, and then click on the respective software - Biostar TA790GX A2 | Setup Manual - Page 40
Motherboard Manual Over Clock Panel Restore Default Settings AUTO Over-Clock V3/V6/V9 Engine Real-time Ove r-clock Manual Adjust CPU Clock Test & Apply Manual Setting s AUTO User can click this button and the utility will set the best and stable performance and frequency automatically. A warning - Biostar TA790GX A2 | Setup Manual - Page 41
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M clock adjustment. For beginners in over-clock field, this is a powerful feature to increase system performance. „ V3 Engine This engine will can also manually adjust CPU clock by pressing +/- button or moving the level bar. After manually adjust the CPU clock, - Biostar TA790GX A2 | Setup Manual - Page 42
Motherboard Manual Over Voltage Panel Manual Adjust CPU/Memo ry/Chipset/FSB Voltage CPU Voltage This function allows user to adjust CPU voltage. Click on "+" to increase or "-" to decrease the CPU voltage. Memory Voltage This function allows user to adjust Memory voltage. Click on "+" to increase or - Biostar TA790GX A2 | Setup Manual - Page 43
A2+/TA790GX A2+ SE/TA790GX 128M About Panel In this panel, you can get model name and other system information that may related to over-clocking. You can also get the version number of this software. Note Because the Over Clock and Over Voltage features are controlled by several separate chipset - Biostar TA790GX A2 | Setup Manual - Page 44
Motherboard Manual eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support - Biostar TA790GX A2 | Setup Manual - Page 45
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Enter the file name and then click "Save". Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in - Biostar TA790GX A2 | Setup Manual - Page 46
Motherboard Manual BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. AWARD BIOS Show current BIOS information AMI BIOS Clear CMOS function (Only for AWARD BIOS) Online Update function (Only for AMI BIOS) Save current BIOS to - Biostar TA790GX A2 | Setup Manual - Page 47
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for - Biostar TA790GX A2 | Setup Manual - Page 48
Motherboard Manual (for AMI BIOS only) Automatically download and update the latest BIOS via internet; make sure that the computer is connected to the internet before using this function. After clicking on the Onlinr Update button, the utility will search for the latest BIOS from - Biostar TA790GX A2 | Setup Manual - Page 49
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M CHAPTER 7: USEFUL HELP 7.1 DRIVER INSTALLATION NOTE After you installed your operating system, please insert the Fully Setup Driver CD into your optical drive and install the driver for better system performance. You will see the following window after you - Biostar TA790GX A2 | Setup Manual - Page 50
Motherboard Manual 7.2 EXTRA INFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the - Biostar TA790GX A2 | Setup Manual - Page 51
(system video adapter) Troubleshooting POST BIOS Beep Codes Number of Beeps Troubleshooting Action 1, 3 Reseat the memory, or replace with known good modules. Fatal error indicating a serious problem with the system. Consult your system manufacturer. Before declaring the motherboard beyond - Biostar TA790GX A2 | Setup Manual - Page 52
Motherboard Manual 7.4 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support Failure." Review system's - Biostar TA790GX A2 | Setup Manual - Page 53
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M This page is intentionally left blank. 51 - Biostar TA790GX A2 | Setup Manual - Page 54
Unterstützt DDR2 533 / 667 / 800 Unterstützt DDR2 1066 (by AM2+ CPU) registrierte DIMMs. ECC DIMMs werden nicht unterstützt. Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Grafik Radeon HD 3300 Max. 512MB gemeinsam benutzter Videospeicher Unterstützt - Biostar TA790GX A2 | Setup Manual - Page 55
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Unterstützt die CD Audio-In-Funktion S/PDIF Ausgangsanschluss chluss CPU-Lüfter-Sockel CPU-Lüfterstromversorgungsanschluss 305 mm (L) ATX OS-Unterstüt Windows XP / VISTA zung Biostar behält sich das Recht vor, ohne Ankündigung die Unterst - Biostar TA790GX A2 | Setup Manual - Page 56
la DDR2 1066 (by AM2+ CPU) 256 Mo/512 Mo/1 Go/2 Go/4 Go Les DIMM à registres et DIMM avec code correcteurs Capacité mémoire maximale de 16 Go d'erreurs ne sont pas prises en charge Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Graphiques Radeon HD - Biostar TA790GX A2 | Setup Manual - Page 57
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M SPEC Connecteur IDE Chaque connecteur prend en charge 2 périphériques x1 IDE Connecteur SATA Chaque connecteur prend en charge 1 périphérique x6 SATA Connecteur du panneau avant x1 Prend en charge les équipements du panneau avant Connecteur Audio du - Biostar TA790GX A2 | Setup Manual - Page 58
AM2+ CPU) DIMM registrati e DIMM ECC non sono supportati Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Grafica Radeon HD 3300 La memoria video condivisa massima è di 512 MB Supporto DX10/UVD/HDCP Supporto (Hybrid) CrossFireX (by ATI driver) Modalit - Biostar TA790GX A2 | Setup Manual - Page 59
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M audio digitale Connettore input S/PDIF x1 Supporta la funzione d'input audio digitale Connettori Collettore ventolina CPU su scheda Alimentazione ventolina CPU audio x6 Dimension 225 mm (larghezza) x 305 mm i scheda (altezza) ATX Sistemi Biostar si - Biostar TA790GX A2 | Setup Manual - Page 60
admite DDR de Admite DDR2 de 1066 (by AM2+ CPU) 256MB/512MB/1GB/2GB/ 4GB No admite DIMM registrados o DIMM compatibles con Capacidad máxima de memoria de 16GB ECC Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Gráficos Radeon HD 3300 Memoria máxima de - Biostar TA790GX A2 | Setup Manual - Page 61
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M Especificación sonido digital X1 Fuente de alimentación de ventilador de CPU (con función Smart Fan) Cabecera de ventilador de de sistema Windows XP / VISTA operativo Biostar se reserva el derecho de añadir o retirar el soporte de cualquier SO con o sin - Biostar TA790GX A2 | Setup Manual - Page 62
/ 800 Suporta módulos DDR2 1066 (by AM2+ CPU) Os módulos DIMM registados e os DIMM ECC não são Capacidade máxima de memória: 16GB suportados Onboard side port memory 64MB (TA790GX A2+) Placa gráfica Radeon HD 3300 Onboard side port memory 128MB (TA790GX 128M) Memória de vídeo máxima partilhada - Biostar TA790GX A2 | Setup Manual - Page 63
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M placa Conector da ventoinha da CPU x1 Suporta a entrada de áudio digital Alimentação da ventoinha da CPU (com a função Smart mm (L) X 305 mm (A) ATX da placa Sistemas A Biostar reserva-se o direito de adicionar ou remover operativos Windows XP / VISTA - Biostar TA790GX A2 | Setup Manual - Page 64
(by AM2+ CPU) Brak obsługi Registered DIMM oraz ECC DIMM Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Grafika Radeon HD 3300 Maks. wielkość współdzielonej pamięci video wynosi 512 MB Obsługa DX10/UVD/HDCP Obsługa (Hybrid) CrossFireX (by ATI driver - Biostar TA790GX A2 | Setup Manual - Page 65
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M SPEC Złącze napędu dyskietek x1 Każde złącze obsługuje 2 napę LAN x1 Port USB x4 Gniazdo audio x6 Wymiary 225 mm (S) X 305 mm (W) ATX płyty Obsluga systemu Windows XP / VISTA operacyjne go Biostar zastrzega sobie prawo dodawania lub odwoływania - Biostar TA790GX A2 | Setup Manual - Page 66
Motherboard Manual RUSSIAN СПЕЦ CPU AM2+ AMD 64 AMD Athlon 64 / Athlon 64 FX 32 AM2+ CPU DIMM and ECC DIMM Onboard side port memory 64MB (TA790GX A2+) Onboard side port memory 128MB (TA790GX 128M) Radeon HD 3300 512 МБ DX10/UVD/HDCP Hybrid) CrossFireX (by ATI driver - Biostar TA790GX A2 | Setup Manual - Page 67
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M СПЕЦ 2 x1 1 Порт x1 IDE 2 x1 SATA x6 1 SATA x1 x1 панели CD x1 CD S/PDIF USB-порт x4 x6 Размер 225 мм (Ш) X 305 мм (В) ATX панели Windows XP / VISTA OS Biostar OS 65 - Biostar TA790GX A2 | Setup Manual - Page 68
Motherboard Manual ARABIC AM2 32و 64ﺏﺖAMD 64 AM2+ CPU DDR2 256/512 DDR2 DIMM 1و /2و 4 16 ECC DIMM )Onboard side port memory 64MB(TA790GX A2 Onboardsideport memory128MB(TA790GX 128M 512 HDCP/UVD/DX10 )(Hybrid) CrossFireX (by ATI driver - Biostar TA790GX A2 | Setup Manual - Page 69
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 1 1 IDE SATA 1 6 1 1 1 IDE SATA CD-IN Smart Fan 1 VGA 1 DVI-D 1 4 USB 6 ATX 225 305 X Biostar Windows XP / VISTA 67 - Biostar TA790GX A2 | Setup Manual - Page 70
Motherboard Manual JAPANESE 仕様 AMD 64 32ビットと64 Socket AM2+ 可能です CPU AMD Athlon AM2+ CPU) 16GB 登録済みDIMMとECC DIMM Onboard side port memory 64MB (TA790GX A2+) Radeon HD 3300 ス Onboard side port memory 128MB (TA790GX 128M 512MBです DX10/UVD/HDCP (Hybrid) CrossFireX by ATI driver - Biostar TA790GX A2 | Setup Manual - Page 71
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M 仕様 x1 2 x1 1 IDEコネクタ x1 2つのIDE SATAコネクタ x6 1つのSATA x1 x1 CD x1 CD S/PDIF ネクタ S/PDIF CPU x1 x1 x1 CPU x2 CMOS x1 USBコネクタ 2 USB x3 します x1 24ピン) x1
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
 |
 |
TA790GX A2+/TA790GX A2+ SE/TA790GX 128M
Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.