Biostar TFORCE 550 SE MOTHERBOARD MANUAL
Biostar TFORCE 550 SE Manual
 |
View all Biostar TFORCE 550 SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar TFORCE 550 SE manual content summary:
- Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 1
TForce 550 SE Setup Manual FCC Information and Copyright This equipment has been tested and found to radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 2
5: OverClock Quick Guide 26 5.1 T-Power Introduction 26 5.2 T-Power BIOS Feature 27 5.3 T-Power Windows Feature 35 Chapter 6: Useful Help 44 6.1 Driver Installation Note 44 6.2 Award BIOS Beep Code 45 6.3 Extra Information 45 6.4 Troubleshooting 47 Appendencies: SPEC In - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 3
TForce 550 SE CHAPTER 1: INTRODUCTION 1.1 BEFORE YOU START Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions Panel for ATX Case X 1 User's Manual X 1 Fully Setup Driver CD X 1 USB 2.0 Cable X1 (optional) S/PDIF out Cable X - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 4
Motherboard Manual 1.3 MOTHERBOARD FEATURES Ver 5.x Ver 6.x Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron processors Sempron processors CPU AMD 64 Architecture enables 32 and 64 bit AMD 64 Architecture enables 32 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 5
x1 I/O LAN port x1 USB Port x6 Audio Jack x6 Board Size 219 x 304 (mm) Special NVIDIA nTunes Features RAID 0 / 1 / 0+1support Windows 2K / XP / VISTA OS Support Biostar Reserves the right to add or remove support for any OS With or without notice. TForce 550 SE Ver 6.x ALC861VD - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 6
Motherboard Manual 1.4 REAR PANEL CONNECTORS (VER 5.X) PS/2 Mouse LAN PS/2 Keyboard COM1 USBX2 USBX2 USBX2 Center Rear Side Line In Line Out Mic In 1.5 REAR PANEL CONNECTORS (VER 6.X) PS/2 Mouse LAN PS/2 Keyboard COM1 USBX2 USBX2 USBX2 Line In/ Surround Line Out Mic In 1/ Bass/ Center - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 7
1.6 MOTHERBOARD LAYOUT (VER 5.X) JCFAN1 JKBMS1 JKBMSV1 JATXPWR2 TForce 550 SE JDDRII_2.4V JCOM1 DDR2A1 DDR2B1 DDR2A2 DDR2B2 Socket A M2 JUSB3 JUSBV2 JUSB4 JATXPWR1 JUSBLAN1 LAN JAUDIO1 Codec PEX1_1 PEX1_2 PEX16_1 nForce 550 FDD1 IDE1 PCI1 JNFAN1 Super I/O PCI2 BIOS PCI3 BAT1 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 8
Motherboard Manual 1.7 MOTHERBOARD LAYOUT (VER 6.X) JCFAN1 JKBMS1 JKBMSV1 JATXPWR2 JDDRII_2.4V JCOM1 DDR2A1 DDR2B1 DDR2A2 DDR2B2 Socket A M2 JUSB3 JUSBV2 JUSB4 JATXPWR1 JUSBLAN1 LAN JAUDIO1 Codec PEX1_1 PEX1_2 PEX16_1 nForce 550 FDD1 IDE1 PCI1 JNFAN1 Super I/O PCI2 BIOS PCI3 BAT1 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 9
TForce 550 SE CHAPTER 2: HARDWARE INSTALLATION 2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 10
Motherboard Manual Step 4: Hold the CPU down firmly, and then close the lever toward direct B to complete the installation. Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU FAN power cable to the JCFAN1. This completes the installation. 8 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 11
TForce 550 SE 2.2 FAN HEADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1. JCFAN1: CPU Fan Header JCFAN1 1 4 Pin - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 12
Motherboard Manual 2.3 INSTALLING SYSTEM MEMORY DDR2A1 DDR2B1 DDR2A2 DDR2B2 1. Unlock a DIMM slot by the retaining chip snap back in place and the DIMM is properly seated. B. Memory Capacity DIMM Socket Location DDR/DDR2 Module DDR2A1 256MB/512MB/1GB *1 DDR2B1 256MB/512MB/1GB *1 DDR2A2 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 13
TForce 550 SE C. Dual Channel Memory installation To trigger the Dual Channel function of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the following table. Duual Channel Status DDR2A1 DDR2B1 DDR2A2 DDR2B2 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 14
Motherboard Manual 2.4 CONNECTORS AND SLOTS FDD1: Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables. 34 33 2 1 IDE1: Hard Disk - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 15
TForce 550 SE PEx16-1: PCI-Express bandwidth up to 250MB/s per direction; 500MB/s in total. - PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins. - 2X PEX1_1 PEX1_2 PCI1~PCI4: Peripheral Component Interconnect Slots This motherboard is equipped with 4 standard PCI slots. PCI stands for - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 16
Motherboard Manual CHAPTER 3: HEADERS & JUMPERS SETUP 3.1 HOW TO SETUP JUMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 17
TForce 550 SE JATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on JATXPWR2: ATX Power Source Connector By connecting this connector, it will provide +12V to CPU power circuit. 21 4 3 Pin Assignment 1 +12V 2 +12V 3 Ground 4 Ground 15 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 18
Motherboard Manual JUSB1/JUSB2: Headers for USB 2.0 Ports at Front Panel This 3 JKBMSV1 3 1 JUSBV2 1 JUSBV1 13 Pin 1-2 close 1 3 3 1 Pin 2-3 close Note: In order to support this function "Power-On system via USB device," "JUSBV1/ JUSBV2" jumper cap should be placed on Pin 2-3 individually. 16 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 19
TForce 550 SE JAUDIOF1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. It will disable the output on back panel audio connectors. 2 10 1 9 Pin Assignment 1 Mic Left in 2 Ground 3 Mic Right in 4 GPIO 5 Right line in 6 Jack - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 20
Motherboard Manual JCMOS1: Clear CMOS Header By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. 13 Pin 1-2 Close: Normal Operation (default). 1 3 13 Pin 2-3 Close: Clear CMOS - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 21
TForce 550 SE JSATA1~JSATA4: Serial ATA Connectors The motherboard has a PCI to SATA Controller with 4 channels SATA interface, it satisfies the SATA 2.0 spec and with transfer rate of 3.0Gb/s. 1 4 7 SATA4 S ATA 3 S ATA 2 S ATA 1 Pin Assignment 1 Ground 2 TX+ 3 TX- 4 Ground 5 RX- 6 RX+ - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 22
Motherboard Manual JPRNT1: Printer Port Connector This header allows you to connector printer on the PC. 2 1 25 Pin Assignment 1 -Strobe 2 -ALF 3 Data 0 4 -Error 5 Data 1 6 -Init 7 Data 2 8 -Scltin 9 Data 3 10 Ground 11 Data 4 12 Ground 13 Data 5 Pin Assignment 14 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 23
TForce 550 SE JDDRII_2.4V : Header for Memory Voltage Overclocking When processing Memory Voltage Overclocking, please place the jumper to pin1-2 Closed. The Default setting is Pin 2-3 Closed. 1 1 3 3 Pin 1-2 Close: Normal status (default). 1 3 Pin 2-3 Close: Memory voltage Overclocking. Note - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 24
on the motherboard to show system status. LED1 LED2 LED1 and LED2: These 2 LED indicate system power on diagnostics. Please refer to the table below for different messages: LED1 ON ON OFF OFF LED2 ON OFF ON OFF Message Normal VGA Error Memory Error Abnormal: CPU / Chipset error. 22 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 25
TForce 550 SE CHAPTER 4: NVIDIA RAID FUNCTIONS 4.1 OPERATION SYSTEM z Supports Windows XP Home/Professional Edition, and Windows 2000 Professional. 4.2 RAID ARRAYS NVRAID supports the following types of RAID arrays: RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 26
Motherboard Manual RAID 1: Every read and write is actually carried out in parallel across be applied for high-availability solutions, or as a form of automatic backup that eliminates tedious manual backups to more expensive and less reliable media. Features and Benefits Drives: Minimum 2, and - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 27
TForce 550 SE RAID 0+1: RAID 0 drives can be mirrored using RAID 1 techniques. Resulting 3 Block 5 Block 2 Block 4 Block 6 ※ For more detailed setup information, please refer to the Driver CD, or go to http://www.nvidia.com/page/pg_20011106217193.html to download NVIDIA nForce Tutorial Flash. 25 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 28
Motherboard Manual CHAPTER 5: OVERCLOCK QUICK GUIDE 5.1 T-POWER INTRODUCTION Biostar T-Power is a whole new utility that is designed for overclock users. Based on many precise tests, Biostar Engineering Team (BET) has developed this ultimate overclock engine to raise system performance. No matter - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 29
TForce 550 SE 5.2 T-POWER BIOS FEATURE A. Overclocking Navigator Engine (O.N.E.): ONE provides two powerful overclocking engines: MOS and AOS for both Elite and Casual overclockers. Manual Overclock System (M.O.S.) MOS is designed for experienced overclock users. It allows users to customize - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 30
Motherboard Manual CPU Overclock Setting: CPU Voltage: This function will increase CPU stability when overclocking. However, the CPU temperature will increase when CPU voltage is increased. Choices: The adjustable range is from 0.800V to 2.310V. CPU Frequency: CPU Frequency is directly in proportion - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 31
TForce 550 SE Automatic Overclock System (A.O.S.) For beginners in overclock field, BET had developed an easy, fast, and powerful feature to increase the system performance, named A.O.S. Based on many tests and experiments, A.O.S. provides 3 ideal overclock configurations that are able to raise the - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 32
Motherboard Manual V12 Tech Engine: This setting will raise about 25%~30% of whole system performance. Notices: 1. Not all types of AMD CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. 2. From BET experiments, the Atholon64 FX CPU is not suitable - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 33
TForce 550 SE C. Memory Integration Test (M.I.T.): This function is under "Overclocking Navigator Engine" item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1: The default setting under this item is "Disabled"; the condition parameter should be - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 34
will automatically log in the default BIOS setting, and all overclock settings will be re-configured. E. Integrated Flash Program (I.F.P.): IFP is a safe and quick way to upgrade BIOS. Step 1: Go to Biostar website (http://www.biostar.com.tw) to download the latest BIOS file. Then, save the file - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 35
TForce 550 SE F. Smart Fan Function: Smart Fan Function is under "PC Health Status". This is a brilliant feature to control CPU Temperature vs. Fan speed. When enabling Smart Fan function, Fan speed is controlled automatically by CPU temperature. This function will protect CPU from overheat problem - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 36
Motherboard Manual Start PWM Value When CPU temperature arrives to the set value, the CPU fan will work under Smart Fan Function mode. The range is from 0~127, with an interval of 1. Slope PWM Choices: 1 PWM Value/℃ (default), 2 PWM Value/℃, 4 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 37
TForce 550 SE 5.3 T-POWER WINDOWS FEATURE A.Hardware Monitor: T-Power Hardware monitor allows users to condition. The program will trigger an alarm or shut down the system when unpredictable errors occur. All the monitoring items are illustrated by a waveform diagram. Hardware Monitor Toolbar - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 38
Motherboard Manual CPU Temperature This column configures the CPU temperature. There is a waveform to represent the status of CPU temperature. By adjusting , users can easily configure the upper limit of CPU temperature for system operating. In this diagram, the white line represents the upper limit - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 39
CPU/Battery Voltage TForce 550 SE i. VCore This item displays the CPU voltage, represented by a light blue line. Users can set the upper and lower limit by adjusting to monitor the CPU operating voltage. If CPU voltage is higher or lower than the set value, the status line will change into a red - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 40
Motherboard Manual B. Overclocking Configurations This diagram is designed for T-series Overclocking utility. Friendly interface and solid overclock features are the major concept of this utility. Graphic 1 will appear when activating this utility. Graphic 2 Graphic 1 A. Clicking on "Biostar" - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 41
CPU Overclocking Settings: TForce 550 SE By adjusting can configure three items for CPU overclocking. A. CPU Frequency Range: 133MHz~450MHz. Interval: 1MHz. B. CPU Ratio Range: 4~25. Interval: 1. C. CPU Voltage Range: 1.175V~1.725V. Interval: 0.025V. Memory Overclocking Settings: By adjusting can - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 42
Motherboard Manual PCI Overclocking Setting: This diagram shows present PCI working status and helps to monitor PCI peripherals working status. This item cannot be adjusted. 40 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 43
TForce 550 SE When Smart Fan Function is activated, screens will pop-up to illustrate the fan speed information. i. CPU Temperature: Show current CPU temperature. ii. CPU Fan speed: Show current CPU of CPU Fan and System Fan. 2. When calibrating process is done, the calibrating window will - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 44
Motherboard Manual v. Auto: If the green indicator is lit up, the Smart Fan Function is "On" (Default Setting). Click on this button again to close Smart Fan Function, and a screen as below would pop-up. There will be pulling-meter besides the CPU Fan and System Fan, the CPU Fan and the System Fan - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 45
D. Live Update TForce 550 SE When Live Update program is activated, a screen will pop up to illustrate BIOS related information. i. Link to Internet: Click on this button will link to Biostar website and BIOS file will be downloaded. ii. Update BIOS: Click on this button to run BIOS flashing - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 46
for better system performance. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system. Note: If this window didn't show up after you insert the Driver CD, please use file browser to locate and execute the file SETUP.EXE under - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 47
TForce 550 SE 6.2 AWARD BIOS BEEP CODE Beep Sound Meaning One long beep followed by two short Video card not found or video card beeps memory bad High-low siren sound CPU overheated System will shut down automatically One Short beep when system boot-up No error found during POST Long beeps - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 48
Motherboard Manual B. CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 49
TForce 550 SE 6.4 TROUBLESHOOTING Probable Solution 1. No power to the system at all 1. Make sure power cable is Power light don't illuminate, fan securely plugged in. inside power supply does not turn 2. Replace cable. on. 3. Contact technical support Failure." Review system's equipment - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 50
Motherboard Manual APPENDENCIES: SPEC IN OTHER LANGUAGE GERMAN Ver 5.x Ver 6.x Sockel AM2 Sockel AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Prozessoren Sempron Prozessoren CPU 550 nVIDIA nForce 550 88E1116 PHY LAN 10 / 100 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 51
tzt RAID 0 / 1 / 0+1 Windows 2K / XP / VISTA Biostar behält sich das Recht vor, ohne OS-Unterstüt Ankündigung die Unterstützung für ein zung Betriebssystem hinzuzufügen oder zu entfernen. TForce 550 SE Ver 6.x ALC 861VD 5.1-Kanal-Audioausgabe Unterstützt High-Definition Audio PCI-Steckplatz - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 52
Motherboard Manual FRANCE Ver 5.x Ver 6.x Socket AM2 Socket AM2 de 1000 MHz Chipset nVIDIA nForce 550 nVIDIA nForce 550 ITE 8716F ITE 8716F Fournit la à la spécification SATA Version 2.0 Marvell 88E1116 PHY Marvell 88E1116 PHY LAN 10 / 100 Mb/s et 1 Gb/s négociation 10 / 100 Mb - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 53
audio x6 Fiche audio x3 Dimensions 219 mm (l) X 304 mm (H) de la carte 219 mm (l) X 304 mm (H) Fonctionnali NVIDIA nTunes tés Prise en charge RAID 0 / 1 / 0+1 spéciales NVIDIA nTunes Prise en charge RAID 0 / 1 / 0+1 Windows 2K / XP / VISTA Windows 2K / XP / VISTA Support SE Biostar se - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 54
Motherboard Manual ITALIAN Ver 5.x Ver 6.x Socket AM2 Socket AM2 Processori AMD Athlon 64 / Athlon 64 FX / Processori AMD Athlon 64 / Athlon 64 FX / CPU banda Chipset nVIDIA nForce 550 nVIDIA nForce 550 ITE 8716F ITE 88E1116 PHY Marvell 88E1116 PHY LAN Negoziazione automatica 10 / 100 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 55
TForce 550 SE Ver 5.x Ver 6.x Codec audio ALC 888 Uscita audio 7.1 canali Supporto audio High-Definition (HD) ALC 861VD Uscita audio 5.1 canali Supporto audio High-Definition (HD) Alloggio PCI x4 Alloggio PCI x4 Alloggi Alloggio PCI Express x16 x1 Alloggio PCI Express x16 x1 Alloggio - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 56
Motherboard Manual SPANISH Ver 5.x Ver 6.x Conector AM2 Conector AM2 Procesadores AMD Athlon 64 / Athlon 64 FX / Procesadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron CPU MHz Conjunto de nVIDIA nForce 550 chips nVIDIA nForce 550 ITE 8716F ITE 8716F Le - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 57
X1 Conectores Cabecera de ventilador de CPU X1 en placa Cabecera de ventilador mm. (A) X 304 Mm. (H) la placa TForce 550 SE Ver 6.x ALC 861VD Salida de sonido de 5.1 canales Windows 2K / XP / VISTA Windows 2K / XP / VISTA sistema Biostar se reserva el derecho de añadir o retirar Biostar se - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 58
Motherboard Manual PORTUGUESE Ver 5.x Ver 6.x Socket AM2 Socket AM2 Processadores AMD Athlon 64 / Athlon 64 FX / Processadores AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Athlon 64 x2 / Sempron CPU A arquitectura AMD 64 permite uma computação A arquitectura AMD 64 permite uma - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 59
Windows 2K / XP / VISTA Sistemas A Biostar reserva-se o direito de adicionar ou operativos remover suporte para qualquer sistema suportados operativo com ou sem aviso prévio. TForce 550 SE Ver de saída S/PDIF x1 Conector da ventoinha da CPU x1 Conector da ventoinha do sistema x3 Conector para - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 60
Motherboard Manual POLISH Ver 5.x Ver 6.x Socket AM2 Socket AM2 do FSB 1000 MHz 1000 MHz Chipset nVIDIA nForce 550 nVIDIA nForce 550 Gniazda DDR2 DIMM x 4 Gniazda DDR2 DIMM automatyczną 10 / 100 Mb/s oraz 1Gb/s z automatyczną LAN negocjacją szybkości negocjacją szybkości Działanie w - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 61
LAN x1 Port USB x6 Port USB x6 Gniazdo audio x6 Gniazdo audio x3 Wymiary płyty 219 mm (S) X 304 mm (W) 219 mm (S) X 304 mm (W) Funkcje NVIDIA nTunes. specjalne Obsługa RAID 0 / 1 / 0+1 NVIDIA nTunes. Obsługa RAID 0 / 1 / 0+1 Obsluga Windows 2K / XP / VISTA systemu Biostar zastrzega - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 62
Motherboard Manual RUSSIAN Ver 5.x Ver 6.x AM2 AM2 CPU AMD Athlon 64 / Athlon 64 FX AMD Athlon 64 / Cool'n'Quiet HyperTransport HyperTransport FSB 1000 МГц 1000 МГц Набор nVIDIA nForce 550 nVIDIA nForce 550 Слоты DDR2 DIMM x 4 Слоты DDR2 DIMM x 4 DIMM - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 63
LAN USB x1 x1 x1 x1 x6 x6 PS/2 Мышь PS/2 LAN USB x1 x1 x1 x1 x6 x3 219 мм (Ш) X 304 мм (В) 219 мм (Ш) X 304 мм (В) NVIDIA nTunes NVIDIA nTunes е RAID 0 / 1 / 0+1 RAID 0 / 1 / 0+1 тики Windows 2K / XP / VISTA Biostar OS OS с Windows 2K / XP / VISTA Biostar - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 64
Motherboard Manual ARABIC Ver 6.x Ver 5.x AM2 AMD Athlon 64 / Athlon 64 FX Athlon 64 x2 / Sempron 32و 64ﺏﺖAMD 64 Cool'n'Quietو Hyper Transport 1000 HyperTransport AM2 AMD Athlon 64 / Athlon 64 FX Athlon 64 x2 / Sempron 32و 64ﺏﺖAMD 64 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 65
TForce 550 SE Ver 6.x Ver 5.x ALC 861VD ALC 888 5.1 7.1 4 PCI 4 PCI 1 PCI 0 / 1 / 0+1 219 304 X 219 304 X Windows 2K / XP / VISTA Windows 2K / XP / VISTA Biostar Biostar 63 - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 66
Motherboard Manual JAPANESE Ver 5.x Ver 6.x Socket AM2 Socket AM2 AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / AMD Athlon 64 / Athlon 64 FX / Athlon 64 x2 / Sempron Sempron CPU AMD 64 32ビットと64 AMD 64 32ビットと64ビット計 1000 MHz 1000 MHz FSB nVIDIA - Biostar TFORCE 550 SE | MOTHERBOARD MANUAL - Page 67
TForce 550 SE Ver 5.x Ver 6.x Codec ALC 888 7.1 ALC 861VD 5.1 PCIスロット x4 PCIスロット x4 PCI Express x16スロット x1 PCI Express x16スロット x1 PCI Express x 1スロット x2 PCI Express x 1スロット x2 x1 x1 IDEコネクタ x1 SATAコネクタ x4 x1 x1 CD x1 S/PDIF x1 ネクタ CPU
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
 |
 |
TForce 550 SE Setup Manual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’s manual. All the
brand and product names are trademarks of their respective companies.