Bissell AirRam and MultiHand Vac Bundle B0034 User Guide

Bissell AirRam and MultiHand Vac Bundle B0034 Manual

Get Bissell AirRam and MultiHand Vac Bundle B0034 PDF manuals and user guides View all Bissell AirRam and MultiHand Vac Bundle B0034 manuals
Add to My Manuals
Save this manual to your list of manuals

Bissell AirRam and MultiHand Vac Bundle B0034 manual content summary:

  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 1
    AIRRAM Vacuum ___________ USER GUIDE 1984 SERIES
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 2
    lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the appliance. • Use only manufacturer's recommended attachments as described in this manual; misuse or use of any accessory or attachment other than those
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 3
    the battery safely in accordance with local regulations. Service: • Before using the appliance and after any or smoking. • Use only as described in this manual. • Don't use on concrete, tarmacadam or other flooring manufacturer's recommended cleaning instructions. • May damage delicate fabrics
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 4
    well in two years as it does today, so this guide has tips on using (pages 5-8), maintaining (pages 9-13), and if there is a problem, troubleshooting (page 14). In just a few simple assembly steps, roll. Please refer to instructions on how to remove brush roll and plug the brush bar hole. 4 www
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 5
    Assembly "click" Attach the lower handle onto the head of the AirRam. Press the button at the top of the upper handle and slot it into the lower handle until it clicks. "click" "click" Insert the battery by sliding it down. It will click into place. To extend the upper handle, hold down the
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 6
    Operation Without pressing the power button, place your foot on the left side of the AirRam head and pull the handle back. The power button is located on the left hand side of the AirRam head. Press the button with your foot to turn the AirRam on. 6 www.BISSELL.com
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 7
    Storing Your AirRam To stow the upper handle, simply The handle will now be fully retracted press the button on the left hand side and the AirRam can be conveniently and push the handle down. stored. www.BISSELL.com 7
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 8
    Battery Charging When the state of charge indicator starts to flash one green LED, recharge the battery. The battery can be charged whilst it's in the AirRam, or when it's off the product. To remove the battery, squeeze the latch underneath and pull upwards. 4 hours Plug the charger in and
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 9
    Emptying the Dirt Bin Firmly hold the AirRam with one hand and pull the dirt bin handle and lift the dirt bin our of the AirRam. Release the latch with the green arrow, to pull open the bin lid. Hold the AirRam's dirt bin over a waste basket and push the green lever towards the open lid to empty.
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 10
    Cleaning the Filters Firmly hold the AirRam with one hand and pull the dirt bin handle and lift the dirt bin out of the AirRam. Pull the filter out of the dirt bin. Tap the dirt from the filter and tip any dirt from the filter housing. Wash the filter if necessary. Firmly hold the filter and with
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 11
    Replacing the Filters Slide the filter onto the separator. Slide the filter back into the dirt bin. Removing and Cleaning the Brush Roll If the brush bar jams during use, the AirRam will stop and the LEDs will appear red. Before checking for a blockage, remove the battery. Rest the AirRam on
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 12
    The brush roll can now be removed, starting at the button end. Clean the brush roll as needed. "click" Re-insert the brush roll, starting by locating the end furthest away from the button. Then push the brush roll into the AirRam until it clicks into place. Replace the battery by sliding it down
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 13
    Replacing the Filters 10 seconds If the brush roll jams during use, the AirRam will stop working and the LED's will appear red. You will need to remove the battery first, and then remove the brush roll to clean it. The AirRam will not re-start until the red LED lights go out. It should take
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 14
    Trouble Shooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem and snap firmly into place Follow filter cleaning instructions on page 10 Visit www.bissell.com or
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 15
    which may vary from state to state. If you need additional instruction regarding this warranty or have questions regarding what it may cover to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. For any questions or concerns
  • Bissell AirRam and MultiHand Vac Bundle B0034 | User Guide - Page 16
    earn points for discounts and free shipping on future purchases. Faster Service Supplying your information now saves you time should you need to contact us with questions regarding your product. Product Support Reminders and Alerts We'll contact you with any important product maintenance
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
AIRRAM
Vacuum
___________
USER GUIDE
1984 SERIES