Bosch B18IW50NSP Installation Instructions

Bosch B18IW50NSP Manual

Bosch B18IW50NSP manual content summary:

  • Bosch B18IW50NSP | Installation Instructions - Page 1
    INSTALLATION INSTRUCTIONS INSTRUCTIONS D'INSTALLATION INSTRUCCIONES DE INSTALACIÓN Single Door Models Modèles à une porte Modelos de una puerta
  • Bosch B18IW50NSP | Installation Instructions - Page 2
    2
  • Bosch B18IW50NSP | Installation Instructions - Page 3
    /fixtures 7 Base 7 Connecting the power 8 Additional grounding procedure 8 Grounding instruction 8 Connecting the water 8 Installation dimensions 9 Single installation 9 SideĆbyĆSide installation 10 Water connection 11 Appliance dimensions 12 1. 18" Appliance (Freezer/Freezer with Ice and
  • Bosch B18IW50NSP | Installation Instructions - Page 4
    Installation instructions 18 1. Checking the installation cavity 18 2.. Transport of the appliance 18 3. Removing the packaging 19 4. Preparing the appliance 19 5. Changing over the door hinges 20 6. Preparing the installation cavity 22 7. Attaching an alternative antiĆtip device 24 8.
  • Bosch B18IW50NSP | Installation Instructions - Page 5
    Connecting the power" on page 8. e WARNING These appliances are topĆheavy and must be secured to prevent the possibility of tipping forward. AntiĆtip protection is required. Keep doors closed until the appliance is completely installed and secured per installation instructions. Due to the weight and
  • Bosch B18IW50NSP | Installation Instructions - Page 6
    note the thickness of the furniture fronts to prevent damage if the doors are opened at the same time. - Use the Extreme Combination SideĆbyĆSide Heating kit if the gap between the appliances is less than 6" (160 mm). See the section on Optional accessories" on page 17. - Minimum thickness of the
  • Bosch B18IW50NSP | Installation Instructions - Page 7
    , use a troubleĆfree installation of the appliance securely and functions properly, the base must be flat and level. The base must be made of a hard, rigid material. The installation area must be the same height as the rest of the room. On account of the heavy weight of a fully loaded appliance
  • Bosch B18IW50NSP | Installation Instructions - Page 8
    use an adapter. - Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. The appliance comes with a 3Ćwire power the appliance checked by a qualified electrician or service technician if you are in doubt as to whether the appliance has
  • Bosch B18IW50NSP | Installation Instructions - Page 9
    of the water connection B Area for installation of the power connection D Opening depth of niche, depending on kitchen design (see DESIGN GUIDE) D = 24" (610 mm) minimum NOTE: Cavity must be suare. Side wall of the cavity must be flush. Appliance 18" 24" 30" X 18" (457 mm) 24 (610 mm
  • Bosch B18IW50NSP | Installation Instructions - Page 10
    appliances. Example: Freezer 18" / Refrigerator 30" Legend: A Area for installation of the water connection B Area for installation of the power connection 10 D Opening depth of niche, depending on kitchen design (see DESIGN GUIDE) D = 24" (610 mm)
  • Bosch B18IW50NSP | Installation Instructions - Page 11
    Water connection The supply pipe can be located a) at the side on the right, b) at the side on the left or c) underneath. 11
  • Bosch B18IW50NSP | Installation Instructions - Page 12
    dimensions7. 1. 18" Appliance (Freezer/Freezer with Ice and Water dispenser) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / : One design of the wooden panel displayed. For further information about the different styles check the DESIGN GUIDE.
  • Bosch B18IW50NSP | Installation Instructions - Page 13
    2. 18" Appliance (Wine unit) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may dimensions Note: One design of the wooden panel displayed. For further information about the different styles check the DESIGN GUIDE. 13
  • Bosch B18IW50NSP | Installation Instructions - Page 14
    3. 24" Appliance (Refrigerator/Freezer/Freezer with Ice and Water dispenser) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) 14 Note: One design of the wooden panel displayed. For further information about the different styles check the DESIGN GUIDE.
  • Bosch B18IW50NSP | Installation Instructions - Page 15
    4. 24" Appliance (Wine unit) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) / -1/2" (13 mm). b) Dimensions may dimensions Note: One design of the wooden panel displayed. For further information about the different styles check the DESIGN GUIDE. 15
  • Bosch B18IW50NSP | Installation Instructions - Page 16
    5. 30" Appliance (Refrigerator/Freezer/Freezer with Ice and Water dispenser) e) e) Front view (without door panel) Legend: a) Adjustment in levelling legs +13/8" (35 mm) 16 Note: One design of the wooden panel displayed. For further information about the different styles check the DESIGN GUIDE.
  • Bosch B18IW50NSP | Installation Instructions - Page 17
    Required accessories and tools 1. Supplied accessories - Installation instructions - Operating instructions - Installation kit 2. Optional accessories8. Basic Combination SideĆbyĆSide Sealing kit For permanent connection of two individual appliances, e. g. Freezer next to Refrigerator. Extreme
  • Bosch B18IW50NSP | Installation Instructions - Page 18
    the water connection. (only for appliances with ice maker) Also follow the instructions in the section on Connecting the water" on page 8. q Check attachment of the adjacent furniture/fixtures. All furniture parts in the vicinity of the appliance must be connected securely to the wall. q Check that
  • Bosch B18IW50NSP | Installation Instructions - Page 19
    in suitable receptacles, otherwise they may get lost. q Move the appliance with a hand truck securely. q Remove transportation packaging: - Remove the cartoon. Use the cutter securely to protect the surface of appliance. - Take supplied accessories out of protection parts of packaging. d CAUTION
  • Bosch B18IW50NSP | Installation Instructions - Page 20
    spring on the hinge. Loosen the screw from I to 0. q Remove the hinges. q Remove the hinge box covers. 20 q Remove the parts of grill. i It will used new parts.
  • Bosch B18IW50NSP | Installation Instructions - Page 21
    q Change over the hinge angle. q Fix the hinges on the appliance. Change the hinges crosswise! q Fit the plastic part of the grill. q Mount the grill completely. q Fix the door. q Change over the fixation parts on the door. q Span the spring on the hinge. Tighten the screw from 0 to I. 21
  • Bosch B18IW50NSP | Installation Instructions - Page 22
    set contains fastening screws for various applications. Select the fastening screws according to the local conditions. - If the supplied fastening screws do not permit secure attachment of the antiĆtip brackets and therefore the appliance, another method must be used to attach the antiĆtip brackets
  • Bosch B18IW50NSP | Installation Instructions - Page 23
    ). q Attach the antiĆtipĆbracket completely. Be sure screws hold tight. q Manually insert the screw into the wall plug until the screw begins to resist. q of injury! Not recommended for use in lightĆweight masonry material such as block or brick. Not recommended for use in new concrete which has
  • Bosch B18IW50NSP | Installation Instructions - Page 24
    tip brackets cannot be attached securely, an alternative antiĆtip device can be attached. However, ensure that there is no play between the appliance and the antiĆtip connecting pipe to the shutĆoff valve according to the instructions supplied by the manufacturer of the ice maker installation kit
  • Bosch B18IW50NSP | Installation Instructions - Page 25
    byĆside installation is intended, now connect the two appliances together. See the Installation Manual for the SideĆbyĆSide kits. q To protect appliance into the installation cavity d CAUTION d Caution when pushing the appliance into the installation cavity. Do not damage the water pipe or power
  • Bosch B18IW50NSP | Installation Instructions - Page 26
    and feed forwards under the appliance. When pushing in the appliance, pull the cable forwards. or Using adhesive tape, stick the power cord to the floor centrally behind the appliance approx. 15" (380 mm) away from the rear panel of the cavity. q Carefully push the appliance into the cavity until
  • Bosch B18IW50NSP | Installation Instructions - Page 27
    , left and right, etc.. - The adjustment of the rear feet is facilitated if the appliance is unloaded at the rear. - If using a wooden beam as an alternative antiĆtip device according to point 6 of this installation manual, rotate the appliance all the way towards the wooden beam. 13. Attaching the
  • Bosch B18IW50NSP | Installation Instructions - Page 28
    i When connecting the water pipe to the solenoid valve of the appliance, follow the instructions supplied by the manufacturer of the ice maker installation kit enclosed with the installation manual. d CAUTION d When bending the water pipe, do not kink it, otherwise there is a risk of leaks
  • Bosch B18IW50NSP | Installation Instructions - Page 29
    the union nut and seal onto the water pipe. q Push the end of the water pipe into the appliance connection and screw on the union nut 3. Tighten handĆtight. q Using the openĆended wrench, tighten the union nut. Do not overturn! q Open the shutĆoff valve and main water tap. Check the
  • Bosch B18IW50NSP | Installation Instructions - Page 30
    the following working steps and thus the appearance of the overall kitchen front later on, the appliance should now be operated. q Open the appliance door. q Press the POWER button. Only for appliances with a water connection: ! NOTE ! In order to avoid the risk of damage caused by leaking water
  • Bosch B18IW50NSP | Installation Instructions - Page 31
    surfaces of the furniture doors during installation. The total weight of the furniture front must not exceed the following values appliance door by means of fitting parts on the appliance. These fitting parts allow the furniture door to be adjusted precisely and attached securely to the appliance
  • Bosch B18IW50NSP | Installation Instructions - Page 32
    in the appliance with weights in order to ensure that the gap width is as precise as possible. Recommendations: 18" Appliance 22 lbs / 10 kg 24" Appliance 33 lbs / 15 kg 30" Appliance 44 lbs / 20 kg q Unscrew the installation support part from the appliance door. i Using the positioning
  • Bosch B18IW50NSP | Installation Instructions - Page 33
    furniture doors. Always screw into the best loadĆbearing material of the furniture door. q Transfer the middle drill holes along the outer edge of the appliance door to the furniture front and mark. 33
  • Bosch B18IW50NSP | Installation Instructions - Page 34
    which are screwed from behind! q Using the positioning aid, set both longitudinal sides of the furniture door parallel. q Using a square, extend the drill hole associated fixing plate. Slide the bracket onto the screw on the appliance door and tighten. Align the furniture door with the double
  • Bosch B18IW50NSP | Installation Instructions - Page 35
    nuts on the adjusting rail. This will fix the side alignment of the door. q Attach the bracket: - Lift the furniture door slightly away from the appliance door. - Push the side bracket (1.) on the left and right over the screws. - Insert the side bracket (2.) on the left and right into the fixing
  • Bosch B18IW50NSP | Installation Instructions - Page 36
    cover the entire height of the door. If doors exceed the standard height, use the extra long finger guard (see "Optional accessories"). q Hold the finger brackets! q Insert the finger guard into the gap between the appliance and adjacent furniture (1.). q Clamp the finger guard under the brackets
  • Bosch B18IW50NSP | Installation Instructions - Page 37
    is shorter on the side on which the finger guard has been attached. q Attach the light switch cover. i The cover for 24", 30" and 36" appliances can be screwed to the door. 37
  • Bosch B18IW50NSP | Installation Instructions - Page 38
    to be aligned parallel to the furniture door in order to obtain an optimum overall appearance. q Remove covers. q Loosen screws on the 4 clamps. A Appliance B Furniture q Screw on the brackets (side) for holding the cover strip. 38 q Insert flat screwdriver into one of the 4 slots and push the
  • Bosch B18IW50NSP | Installation Instructions - Page 39
    q ReĆattach covers. 27. Attaching the cover frame and the shelf (for freezer unit with iceĆwater dispenser only) q Insert shelf. 28. Attaching the cover strips (for wine storage cupboard only) Note: For 3/4" / 19 mm thick furniture doors: q Slide cover frame onto the iceĆwater dispenser and press
  • Bosch B18IW50NSP | Installation Instructions - Page 40
    whether the air separator collides with parts of the ventilation grille. If required, shorten the longitudinal side of the air separator by approx. 6mm. For appliances with iceĆwater dispenser: q The air separator must be cut out in the area of the hose. q Slide cover strips in the gap between the
  • Bosch B18IW50NSP | Installation Instructions - Page 41
    30. Adjusting the door opening angle Depending on the installation situation, it may be necessary to adjust the door opening angle. A door opening angle of 115° has been set at the factory. To adjust the door opening angle to 90°: q Open door to 90°. 31. Changing the door spring To adjust the door
  • Bosch B18IW50NSP | Installation Instructions - Page 42
    42
  • Bosch B18IW50NSP | Installation Instructions - Page 43
    48 Meubles/Appareillages électriques 48 Sol 48 Raccordement à l'alimentation électrique 49 Procédure additionnelle de mise à la terre 49 Instructions de raccordement à la terre 49 Raccordement de l'eau 49 Dimensions d'installation 50 Installation individuelle 50 Installation côte à côte 51
  • Bosch B18IW50NSP | Installation Instructions - Page 44
    Instructions d'installation 59 1. Vérification de la cavité d'installation 59 2.. Transport de l' 15. Raccordement de l'eau à l'appareil 69 16. Fixation du bandeau de socle 70 17. Mise en service de l'appareil 71 18. Préparation des portes de meubles 71 19. Application d'une charge à la porte
  • Bosch B18IW50NSP | Installation Instructions - Page 45
    éteinte avant de nettoyer ou d'effectuer des réparations. Les réparations sont réservées à un technicien qualifié du service aprèsĆvente. Les présentes instructions d'installation sont destinées à être utilisées par des installateurs qualifiés. Tous les raccordements de l'eau, de l'électricit
  • Bosch B18IW50NSP | Installation Instructions - Page 46
    assortie d'un danger de mort ou de blessures graves si vous ne respectez pas son contenu. d PRUDENCE d PRUDENCE ć Cette mention précède une instruction assortie d'un risque de blessures légères ou de dégâts si vous ne respectez pas son contenu. i Ce symbole sert à attirer votre attention sur
  • Bosch B18IW50NSP | Installation Instructions - Page 47
    Appareils individuels avec séparation 1. 2. 3. 4. i Remarque - Lorsque vous dimensionnez la séparation affectée à la configuration 4 ciĆdessus, notez l'épaisseur de la façade des meubles pour empêcher des dégâts lors de l'ouverture simultanée des portes. - Utilisez le kit de chauffage pour
  • Bosch B18IW50NSP | Installation Instructions - Page 48
    Cavité d'installation Pour une installation sans incident de l'appareil et pour qu'ensuite la façade du meuble soit esthétique, il est important que la cavité d'installation ait bien les dimensions spécifiées. i AssurezĆvous en particulier que la cavité présente des angles droits. Vous pouvez le vé
  • Bosch B18IW50NSP | Installation Instructions - Page 49
    être protégée par un fusible/disjoncteur supportant un ampérage de 10A ou plus. conduites en plastique, conduites de gaz ou conduites d'eau. Instructions de raccordement à la terre Cet appareil devra être un électricien agréé ou un technicien du service aprèsĆvente. Raccordement de l'eau Il faut
  • Bosch B18IW50NSP | Installation Instructions - Page 50
    B représente la zone où installer le raccordement de l'électricité D profondeur d'ouverture de la cavité, ceci dépendant de la configuration de la cuisine (Voir le GUIDE DE CONCEPTION) D = 24" (610 mm) minimum REMARQUE : La cavité doit être carrée. La paroi latérale de la cavité doit se trouver dans
  • Bosch B18IW50NSP | Installation Instructions - Page 51
    de l'eau B Représente la zone où installer le raccordement de l'électricité D Profondeur de la cavité, ceci dépendant de la configuration de la cuisine (Voir le GUIDE DE CONCEPTION) D = 24" (610 mm) minimum REMARQUE : La cavité doit être carrée. La paroi latérale de la cavité doit se trouver dans
  • Bosch B18IW50NSP | Installation Instructions - Page 52
    Installation côte à côte Il est possible de placer la conduite d'alimentation a) sur le côté droit (a), b) sur le côté gauche (b) ou c) en dessous (c). 52
  • Bosch B18IW50NSP | Installation Instructions - Page 53
    ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION. 53
  • Bosch B18IW50NSP | Installation Instructions - Page 54
    ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION. 54
  • Bosch B18IW50NSP | Installation Instructions - Page 55
    ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION. 55
  • Bosch B18IW50NSP | Installation Instructions - Page 56
    ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION.
  • Bosch B18IW50NSP | Installation Instructions - Page 57
    ne représentent qu'un style de panneau en bois. Pour obtenir des informations avancées sur les différents styles, veuillez vous reporter au GUIDE DE CONCEPTION. 57
  • Bosch B18IW50NSP | Installation Instructions - Page 58
    requis 1. Accessoires fournis - Instructions d'installation - Instructions d'utilisation - Kit d'installation Outils - Visseuse sans cordon T20 - Tournevis Torx T20 (empreinte cruciforme) - Embout Torx T20 + support magnétique - Clé à pipe 5/16" (8 mm)I pour écrou hexagonal - Forets à bois
  • Bosch B18IW50NSP | Installation Instructions - Page 59
    l'installation, vérifiez que la cavité est conforme à toute les exigences visant une installation sûre et sans incident. q Vérifiez le sol. Suivez les instructions figurant à la page 6 dans la section «Lieu d'installation». q Vérifiez la dimension de la cavité. q Vérifiez que la cavité présente des
  • Bosch B18IW50NSP | Installation Instructions - Page 60
    3. Enlèvement de l'emballage d AVERTISSEMENT d - L'appareil risque de se renverser pendant son déballage. - L'appareil est très lourd. - Lorsque vous ouvrez la porte de l'appareil, ce dernier risque de basculer en avant. Soyez prudent, sinon les personnes qui vous aident risquent de se blesser et l'
  • Bosch B18IW50NSP | Installation Instructions - Page 61
    q Détendez le ressort sur la charnière. Desserrez la vis en l'amenant de I à 0. q Retirez les charnières. q Retirez le couvercle du boîtier à charnière. q Retirez les pièces de la grille. q Dévissez la porte. 61
  • Bosch B18IW50NSP | Installation Instructions - Page 62
    i ServezĆvous de pièces neuves. q Permutez l'angle de la charnière. q Fixez les charnières sur l'appareil. Permutez les charnières selon un ordre croisé ! q Adaptez la pièce en plastique de la grille. q Montez au complet les pièces de la grille. q Fixez la porte. q Permutez les pièces de
  • Bosch B18IW50NSP | Installation Instructions - Page 63
    (609,6-647,7) q Refixez le couvercle de la boîte à charnière. q Permutez les plaques de fixation selon un ordre croisé. 6. Préparation de la cavité d'installation i Il faut 2 brides antiĆrenversement pour chaque appareil ou combinaison d'appareils (côte à côte). q Déterminez les points de fixation
  • Bosch B18IW50NSP | Installation Instructions - Page 64
    Application sur plancher en bois Utilisez les vis à bois (5x60 mm et 4x15 mm) fournies avec l'appareil. q Percez des trous de guidage : De 1/8" (3 mm) pour les vis à bois faisant 5x60 mm De 5/64" (2 mm) pour les vis à bois faisant 4x15 mm AssurezĆvous que les vis traversent bien le plancher et pénè
  • Bosch B18IW50NSP | Installation Instructions - Page 65
    cher que l'eau, en fuyant, ne provoque des dégâts. q Branchez la conduite de raccordement contre la vanne de fermeture en respectant les instructions fournies par le fabricant du kit destiné à l'installation du distributeur de glaçons. q Installez la conduite de raccordement. Respectez toujours les
  • Bosch B18IW50NSP | Installation Instructions - Page 66
    9. Fixation du protègeĆbordures q Pour protéger les angles de la cavité, fixez les cornières de protection dans ces angles à l'aide de ruban adhésif. 10. Installation côte à côte i Si vous prévoyez une installation côte à côte, il faut relier maintenant les deux appareil l'un avec l'autre. Veuillez
  • Bosch B18IW50NSP | Installation Instructions - Page 67
    1¼" (32 mm) auĆdessus du sol. q Dévissez les pieds réglables en hauteur jusqu'à ce que la marque sur la base/le sol a atteint la dimension guide indiquée (1¼"/32 mm). i Il est très important de respecter cette dimension pour pouvoir ensuite aligner les façades des meubles. q Alignez les façades des
  • Bosch B18IW50NSP | Installation Instructions - Page 68
    i Remarque: - Ne voilez pas ni ne poussez pas l'appareil de force dans la cavité ! Lorsque vous dévissez les pieds réglables en hauteur, procédez graduellement : alternez en permanence entre les côtés gauche et droit, gauche et droit, etc. - Si vous délestez l'arrière de l'appareil, l'ajustage de
  • Bosch B18IW50NSP | Installation Instructions - Page 69
    adjacents (uniquement dans le cas d'un appareil individuel) 15. Raccordement de l'eau à l'appareil i Lorsque vous raccordez la conduite d'eau à l'électrovanne de l'appareil, respectez les instructions fournies par le fabricant du kit servant à installer le distributeur de glaçons ; ces
  • Bosch B18IW50NSP | Installation Instructions - Page 70
    16. Fixation du bandeau de socle d PRUDENCE d La hauteur maximale du bandeau de socle est de 4" depuis la surface du plancher. Ne recouvrez pas les ouïes de ventilation que comporte le panneau de base. Risque d'endommager l'appareil. q Si nécessaire, réduisez le bandeau de socle à la longueur
  • Bosch B18IW50NSP | Installation Instructions - Page 71
    , il faut mettre l'appareil en service maintenant. q Ouvrez la porte de l'appareil. q Appuyez sur le bouton POWER. Seulement pour les appareils qui requi le matériau, constitutif de la porte, le mieux capable de supporter la charge. - Conservez les accessoires d'aide au positionnement, vous en
  • Bosch B18IW50NSP | Installation Instructions - Page 72
    bandeau métallique contre leur dos. Ce bandeau est en vente auprès du service aprèsĆvente en tant qu'accessoire en option. Voir la section intitulée « dans la partie du matériau de porte la mieux en mesure de supporter la charge. Conservez les accessoires d'aide au positionnement, vous en aurez
  • Bosch B18IW50NSP | Installation Instructions - Page 73
    d'ajustage constitue le moyen le plus important pour ajuster la façade du meuble. q De la porte de l'appareil, dévissez la pièce support d'installation. i Conservez les accessoires d'aide au positionnement, vous en aurez encore besoin dans la suite du montage. q Marquez cette distance X au dos de
  • Bosch B18IW50NSP | Installation Instructions - Page 74
    és à différentes options de configuration des portes de meuble. Vissez toujours dans le matériau de la porte de meuble le mieux en mesure de supporter la charge. 21. Fixation et alignement de la porte de meuble i Les boulons à double filetage sont chargés d'ajuster la façade du meuble en hauteur
  • Bosch B18IW50NSP | Installation Instructions - Page 75
    q Alignez la porte du meuble et contrôlez ce faisant la constance de l'interstice sur tout le périmètre. Si nécessaire, déplacez le rail d'ajustage vers la gauche ou la droite. q Vissez les plaques de fixation (10x) 22. Fixation de la porte de meuble i Maintenant, fixez les poignées du meuble.
  • Bosch B18IW50NSP | Installation Instructions - Page 76
    1. Desserrez la vis. 2. Vérifiez la position latérale de la porte. 3. Vissez la vis à bois. 4. Serrez la vis. 5. Fixez le couvercle sur les brides. q Refermez la porte et vérifiez l'alignement latéral. Corrigez en tapant légèrement avec la main sur le bord de la porte ouverte du meuble. q Serrez
  • Bosch B18IW50NSP | Installation Instructions - Page 77
    q Reportez les cotes de la porte contre le bandeau protègeĆdoigts. q A l'aide d'un couteau et d'une règle en acier, raccourcissez le bandeau protègeĆdoigts jusqu'à la longueur requise. 24. Fixation du bandeau protègeĆdoigts q Poussez la coiffe sur la bride et vissez à fond. q Fixez le bandeau prot
  • Bosch B18IW50NSP | Installation Instructions - Page 78
    25. Fixation des couvercles q Placez la bande couvercle verticale sur le bandeau protègeĆdoigts. i La pièce latérale de la bande couvercle est plus courte sur le côté sur lequel le bandeau protègeĆdoigts a été fixé. q Fixez le couvercle de l'interrupteur d'éclairage. i Vous pouvez visser le
  • Bosch B18IW50NSP | Installation Instructions - Page 79
    Appareils individuels uniquement: B A 26. Alignement du distributeur de glaçons et d'eau (seulement pour unité de congélation avec distriĆ buteur de glaçons et d'eau) Il est possible d'aligner en profondeur le distributeur de glaçons et d'eau dans la découpe ménagée dans la porte du meuble. Ceci
  • Bosch B18IW50NSP | Installation Instructions - Page 80
    27. Fixation du cadre enjoliveur et de la tablette (seulement sur unité de congélation avec distributeur de glaçons et d'eau) 28. Fixation des baguettes couvreĆjoint (seulement pour la cave à vin) Remarque : Portes de meuble faisant 3/4" / 19 mm d'épaisseur: q Enfoncez le cadre enjoliveur sur le
  • Bosch B18IW50NSP | Installation Instructions - Page 81
    q Enfoncez les baguettes couvreĆjoint dans la cavité située entre la porte du meuble et le bandeau en verre 29. Montage du séparateur d'air Vissez le séparateur d'air contre la porte du meuble afin de séparer l'air entrant et l'air sortant. q Fermez la porte lentement. Contrôlez si le séparateur d'
  • Bosch B18IW50NSP | Installation Instructions - Page 82
    31. Changement du ressort de porte Pour ajuster le ressort de porte : q A l'aide d'un tournevis à empreinte cruciforme, tournez la vis d'ajustage I = Plus forte tension possible du ressort 0 = Pas de tension ressort 82
  • Bosch B18IW50NSP | Installation Instructions - Page 83
    Índice Antes de comenzar 85 Definiciones 85 Información importante 85 Opciones de instalación 86 Unidad individual 86 SideĆbyĆSide (Lado a lado 86 Electrodomésticos individuales con separación 86 En el final de las unidades de cocina 86 Emplazamiento de la instalación 87 Ambiente de
  • Bosch B18IW50NSP | Installation Instructions - Page 84
    Instrucciones de instalación 98 1. Control de la cavidad para la instalación 98 2.. Transporte del equipo 98 3. Desembalaje 99 4. Preparación del electrodoméstico 99 5. Cambiando las bisagras 100 6. Preparación de la cavidad de instalación 102 7. Montaje de un dispositivo antivuelco adicional
  • Bosch B18IW50NSP | Installation Instructions - Page 85
    mecánica, carpintería y fontanería. Fallos en el producto debido a una instalación inadecuada no esta cubiertos por la garantía. Consulte el manual del usuario por la información concerniente a la garantía. e ADVERTENCIA Utilice el electrodoméstico exclusivamente para lo que ha sido previsto. Repare
  • Bosch B18IW50NSP | Installation Instructions - Page 86
    Opciones de instalación Existen diversas opciones de instalación. Están limitadas exclusivamente por el diseño de la cocina y la función de la protección para los dedos. Unidad individual Electrodomésticos individuales con separación 1. 2. SideĆbyĆSide (Lado a lado) * * * ¡Separación
  • Bosch B18IW50NSP | Installation Instructions - Page 87
    Emplazamiento de la instalación5. d ADVERTENCIA d No instale el electrodoméstico: - a la intemperie, - en un ambiente donde gotee agua, - en ambientes donde existe peligro de heladas. El electrodoméstico es muy pesado. Por los pesos del equipo vacío, consulte la tabla siguiente: Refrigerador de
  • Bosch B18IW50NSP | Installation Instructions - Page 88
    Conexión a la red de alimentación6. d ADVERTENCIA d Peligro de descargas eléctricas - Conéctelo a un tomacorriente de 3 conductores con conexión a tierra. - No desconecte el contacto de toma de tierra. - No utilice adaptadores. - No utilice cables de prolongación. El incumplimiento de estas
  • Bosch B18IW50NSP | Installation Instructions - Page 89
    Medidas de instalación9. Instalación simple10. Leyenda: A Zona para la instalación de la conexión de agua B Zona para la conexión a la red de potencia D Altura de la abertura, según el diseño de la cocina (consultar la GUÍA DE DIESEÑO) D = 24" (610 mm) como mínimo Nota: La cavidad debe estar a
  • Bosch B18IW50NSP | Installation Instructions - Page 90
    Instalación SideĆbyĆSide (Lado a lado) Las dimensiones para la cavidad indicadas arriba para el electrodoméstico correspondiente, deben aplicarse para la instalación SideĆbyĆSide (Lado a lado) de dos electrodomésticos. Ejemplo: Congelador de 18"/Refrigerador de 30" El ancho total de la cavidad
  • Bosch B18IW50NSP | Installation Instructions - Page 91
    Conexión del agua11. La tubería de alimentación puede ubicarse a) al costado derecho (a), b) al costado izquierdo (b), o c) debajo (c). 91
  • Bosch B18IW50NSP | Installation Instructions - Page 92
    e) Medidas de la unidad Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE).
  • Bosch B18IW50NSP | Installation Instructions - Page 93
    . e) Medidas de la unidad Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE). 93
  • Bosch B18IW50NSP | Installation Instructions - Page 94
    de la unidad 94 Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESING GUIDE).
  • Bosch B18IW50NSP | Installation Instructions - Page 95
    . e) Medidas de la unidad Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESIGN GUIDE). 95
  • Bosch B18IW50NSP | Installation Instructions - Page 96
    de la unidad 96 Nota: Se visualiza un diseño de panel de madera. Por más información respecto de diferentes estilos, consulte la guía de diseño (DESING GUIDE).
  • Bosch B18IW50NSP | Installation Instructions - Page 97
    Accesorios y herramientas necesarias 1. Accesorios que forman parte del volumen de entrega - Instrucciones para el montaje - Instrucciones de funcionamiento - Juego de instalación 2. Accesorios opcionales13. Basic Combination SideĆbyĆSide Sealing kit (combinación básico y sellado lado a lado) Para
  • Bosch B18IW50NSP | Installation Instructions - Page 98
    Instrucciones de instalación d CAUTION d Las instrucciones de montaje siguientes describen los pasos a seguir para el montaje de los diferentes tipos de equipos: - unidades de refrigeración - unidades de congelación - unidades de congelación con procesador para hielo - unidades de congelación
  • Bosch B18IW50NSP | Installation Instructions - Page 99
    3. Desembalaje d ADVERTENCIA d - El electrodoméstico puede volcar durante el desembalaje. - El electrodoméstico es extremadamente pesado. - El electrodoméstico puede volcar hacia delante, cuando abra la puerta del mismo. Sea cuidadoso, de otra manera puede lesionarse la gente que le ayuda, o puede
  • Bosch B18IW50NSP | Installation Instructions - Page 100
    5. Cambiando las bisagras d CUIDADO d ¡Antes de trabajar en las bisagras, quite los muelles! ¡Hay peligro de lesiones! Las bisagras de las puertas deben cambiarse de posición, según los requerimientos de la instalación. i Si no es necesario efectuar un cambio de los topes para la puerta,
  • Bosch B18IW50NSP | Installation Instructions - Page 101
    q Cambie de lado el ángulo de la bisagra. q Sujete las bisagras en el electrodoméstico. ¡Cambie las bisagras cruzadas! q Monte completamente las partes nuevas de la parrilla. q Sujete la puerta. q Cambie de lado las piezas de sujeción en la puerta. q Tensione el muelle de la bisagra. Ajuste el
  • Bosch B18IW50NSP | Installation Instructions - Page 102
    (609,6-647,7) q Sujete luego la caja de cobertura de la bisagra. q Sujete las placas de montaje cruzadas. 6. Preparación de la cavidad de instalación i Se necesitan dos grampas antivuelco para cada electrodoméstico o combinación de electrodomésticos (SideĆbyĆSide (Lado a lado)). q Determine los
  • Bosch B18IW50NSP | Installation Instructions - Page 103
    Aplicación con piso de cemento d CUIDADO d Utilice siempre gafas y otros dispositivos de protección cuando instala o trabaja con tarugos. ¡Peligro de lesiones! No recomendado par ser usado en material de mampostería liviana como bloques y ladrillos. No recomendado para ser usado en cemento
  • Bosch B18IW50NSP | Installation Instructions - Page 104
    8. Preparación para conectar el agua (solamente si el electrodoméstico requiere de una conexión de agua) d CUIDADO d Cierre la llave principal de agua, a fin de evitar daños debidos a la pérdida de agua. q Monte la tubería de conexión a la válvula de cierre, según las instrucciones
  • Bosch B18IW50NSP | Installation Instructions - Page 105
    10. Instalación SideĆbyĆSide (Lado a lado) i Si ha previsto un emplazamiento lado a lado, debe ahora unir ambos equipos. Consulte el manual del instalación por la información concerniente a la Instalación SideĆbyĆSide (Lado a lado). q Para proteger la hornacina, sujete los ángulos de protecci
  • Bosch B18IW50NSP | Installation Instructions - Page 106
    q Cuide de no dañar el cable de alimentación. Sujete un pedazo de hilo en el medio del cable, llevándolo hacia delante debajo del electrodoméstico. Cuando introduzca el electrodoméstico, tire el cable hacia delante. o bien Pegue el cable mediante cinta adhesiva en el suelo detrás del electrodomé
  • Bosch B18IW50NSP | Installation Instructions - Page 107
    la parte posterior del equipo. - Si utiliza una vigueta de madera como dispositivo antivuelco alternativo, según se describe en el punto 6 de este manual de instalación, rote el electrodoméstico totalmente hacia la vigueta de madera. q Atornille las placas de las eclisas de sujeción (superiores) al
  • Bosch B18IW50NSP | Installation Instructions - Page 108
    éstico, siga las instrucciones provistas por el fabricante conjuntamente con el kit de montaje del generador de hielo que se incluyen en este manual. d CUIDADO d Cuando conecte la tubería de agua, no la retuerza. De lo contrario existe el riesgo que seproduzcan pérdidas de agua. Utilice los
  • Bosch B18IW50NSP | Installation Instructions - Page 109
    16. Sujeción del panel de protección d CUIDADO d La altura máxima del panel de protección sobre el suelo es de 4". No obture las aberturas de ventilación en el base del panel. Existe riesgo de daños en el electrodoméstico. q Si hace falta, corte el panel de protección a la longitud necesaria.
  • Bosch B18IW50NSP | Installation Instructions - Page 110
    de apariencia de todo el frente de la cocina, ahora debe ponerse en marcha el equipo. q Abra la puerta del electrodoméstico. q Accione el pulsador POWER. Únicamente para equipos que disponen de una conexión de agua: ¡ NOTA ! A fin de evitar eventuales daños debidos al agua que pueda surgir en
  • Bosch B18IW50NSP | Installation Instructions - Page 111
    En el caso de electrodomésticos de 30" y 36" de ancho, pueden sujetarse 2 puertas adyacentes una con otra, en vez de una puerta grande. Estas puertas deben conectarse mediante un listón metálico en la parte posterior. Este listón metálico, puede adquirirse en el vendedor local como accesorio
  • Bosch B18IW50NSP | Installation Instructions - Page 112
    20. Montaje del riel de ajuste en la puerta del mueble i El riel de ajuste es el elemento más importante para el ajuste del frente del mueble. q Desatornille el soporte de instalación de la puerta del electrodoméstico. i Los elementos auxiliares para el posicionamiento son necesarios para el
  • Bosch B18IW50NSP | Installation Instructions - Page 113
    21. Sujeción y alineación de la puerta del muble i Los pernos de doble rosca cumplen la función de ajustar la altura de la puerta del mueble. q Cuelgue la puerta de lo pernos de doble rosca. q Alinee la puerta mediante los pernos de doble rosca (destornillador Torx). q Marque una línea vertical. q
  • Bosch B18IW50NSP | Installation Instructions - Page 114
    22. Sujeción de la puerta del mueble i ¡Atornille ahora las manijas del mueble que ha quitado anteriormente! q Cuelgue la puerta con el riel de ajuste sobre los pernos de doble rosca. q Enrosque las tuercas ligeramente en los pernos de doble rosca. ¡No las ajuste! q Ajuste la puerta del mueble
  • Bosch B18IW50NSP | Installation Instructions - Page 115
    q Ajuste las tuercas en el riel de ajuste. Esto fijará el ajuste lateral de la puerta. q Atornille los soportes inferiores (correspondiente al juego de elementos auxiliares). ¡Practique orificios preparativos en la puerta del mueble! Los soportes inferiores ajustan la alineación lateral de la puerta
  • Bosch B18IW50NSP | Installation Instructions - Page 116
    q Transportar las medidas de la puerta a la protección para los dedos. q Corte la protección para los dedos a la longitud requerida, mediante una regla de acero y un cuchillo. 24. Montaje de la protección para los dedos q Empuje la cubierta sobre el soporte y atornille firmemente. q Monte la
  • Bosch B18IW50NSP | Installation Instructions - Page 117
    25. Montaje de las cubiertas q Coloque el listón de cobertura vertical sobre la protección para los dedos. i La pieza lateral del listón de cobertura es más corto del lada que fue sujetada la protección para los dedos. q Monte la cubierta para el conmutador de la luz. i La cubierta para los
  • Bosch B18IW50NSP | Installation Instructions - Page 118
    Montaje individual únicamente: B A 26. Orientación del dispensador de hielo y agua (solamente para unidad de congelación con dispenĆ sador de hielo y agua) El dispensador de hielo y agua puede orientarse dentro de la escotadura de la puerta del mueble en cuanto a su profundidad. Con ello se permite
  • Bosch B18IW50NSP | Installation Instructions - Page 119
    27. Colocación del listón de cobertura (solamente para el armario de depósito para vinos) 28. Colocación del cuadro de cobertura y del depósito (solamente para unidades con dispensador de hielo y agua) Advertencia: Para puertas de mueble con un espesor de 3/4" / 19 mm: q Desplazar el marco de
  • Bosch B18IW50NSP | Installation Instructions - Page 120
    q Desplazar el listón de cobertura dentro del espacio comprendido entre la puerta del mueble y el vidrio. 29. Montaje del separador de aire Atornille el separador de aire a la puerta del mueble a fin de separar el aire de entrada y salida. q Cerrar la puerta lentamente. Controlar si el escape de
  • Bosch B18IW50NSP | Installation Instructions - Page 121
    31. Cambio del muelle de la puerta A fin de ajustar el muelle de la puerta. q Girar del tornillo de ajuste mediante un destornillador para ranura en cruz. I = aumenta la tensión del muelle. 0 = disminuye la tensión del muelle. 121
  • Bosch B18IW50NSP | Installation Instructions - Page 122
    122
  • Bosch B18IW50NSP | Installation Instructions - Page 123
  • Bosch B18IW50NSP | Installation Instructions - Page 124
    Robert Bosch Hausgeräte GmbH CarlĆWeryĆStraße 34 81739 München Germany www.boschĆhomeappliance.com Subject to modification. Sous réserve de modifications. Se reserva el derecho a efectuar modificaciones. 9000 222 918 (8611)
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124

INSTALLATION INSTRUCTIONS
INSTRUCTIONS D'INSTALLATION
INSTRUCCIONES DE
INSTALACIÓN
Single
Door Models
Modèles à une porte
Modelos
de una puerta