Bosch B36CT81ENS Supplement

8001193697

(0004)

en-us, fr-ca

1.

Remove information material,

adhesive tape and protective foil.

2.

Remove the power cord and

the equipment package from the

appliance.

3.

Clean the appliance.

4.

Roll appliance to its final location.

1.

Fit the handles vertically and

horizontally onto the

pre-assembled bolts.

2.

Use the included 2.5 mm

Allen wrench to tighten the

pre-assembled screws

clockwise in the handles.

First steps

Quickstart

Helpful Hints

Installing the handles

Align the vertical gap

between the doors

Align the horizontal gap

between the doors

Installing the equipment

Water and electrical

connection

Purge the water system

Aligning the appliance

Note:

Note:

The holes in the door handles face

up and down (vertical handles) and

the holes in the drawer handles only

face down (horizontal handles).

(only applicable for appliances

with handles)

For important safety instructions, information on installation, use and

maintenance of the appliance, please refer to the entire user manual.

1.

Using a wrench, screw down both

height adjustable feet, so that

they firmly touch the floor.

2.

Adjust each separately, so that

the appliance is also aligned and

straight.

3.

Use a level to confirm.

±

Install the loose equipment parts

as shown in the appliance

overview picture.

±

Connect water supply on the rear

of the appliance.

±

Insert the power cord plug on the

rear of the appliance and into an

outlet.

1.

Hold the glass under the

water dispenser.

2.

Push the glass upwards against

the dispenser lever or press

è

button and dispense water

for 5 minutes, approximately

3 gallons.

3.

Discard the ice produced within

the first 24 hours. If ice cube

production is switched on, the ice

maker

"

button lights up.

→

refer to "Getting to know your

appliance" in the user manual,

page 14

→

refer to "Installing the appliance"

in the user manual, page 8

→

refer to "Installing the appliance"

in the user manual, page 9

1

2

3

4

5

6

7

8

1.

Press any button on the cool-fresh compartment controls.

2.

Press and hold the

unlock

button of the cool-fresh compartment

controls, until the light bar lights up completely.

3.

Press your desired

storage setting

button.

1.

Install and activate the timer.

2.

Insert both unopened sachets

into the inside housing holders.

3.

Aﬃx adhesive strip onto the

outside housing holder.

4.

Place the Ethylene absorber

on the interior wall closest to

the middle of the cool-fresh bin.

1.

Press

menu

button.

2.

Press

light settings

button.

3.

Press

Y

/

X

Settings button

repeatedly until the settings

display shows the desired

brightness level.

Setting cool-fresh compartment

Equipment Bar

Cleaning your appliance

Ethylene absorber installation

Lighting customization

Note:

Note:

Never use stainless steel

cleaners on the exterior of

the appliance.

0

= lighting oﬀ

1

= minimum brightness

5

= maximum brightness

±

You can adjust the equipment bar vertically and move the

bin (hanging), shelf (hanging) and bottle shelf (hanging) sideways.

±

Clean the appliance with a

soft cloth, lukewarm water

and a little pH-neutral

cleaning liquid.

→

refer to "Controls for cool-fresh compartment" in the user manual, page 16

A

B

E

C

D

1.

Download the

Home Connect (America)

app.

2.

Scan the

QR code

and follow

the instructions in the app.

Connect your appliance

F

Bosch B36CT81ENS Supplement

Bosch B36CT81ENS Manual

Bosch B36CT81ENS manual content summary: