Bosch NDC-225-P Operation Manual

Bosch NDC-225-P Manual

Get Bosch NDC-225-P PDF manuals and user guides View all Bosch NDC-225-P manuals
Add to My Manuals
Save this manual to your list of manuals

Bosch NDC-225-P manual content summary:

  • Bosch NDC-225-P | Operation Manual - Page 1
    IP Dome Camera 200 Series NDC-255-P / NDC-225-P en Installation and Operation Manual
  • Bosch NDC-225-P | Operation Manual - Page 2
  • Bosch NDC-225-P | Operation Manual - Page 3
    IP Camera 200 Series Table of Contents Table of Contents | en 3 1 Safety 7 1.1 Safety precautions 7 1.2 Important safety instructions 8 1.3 FCC & ICES compliance 9 1.4 UL certification 11 1.5 Bosch notices 11 1.6 Copyrights 12 2 Introduction 13 2.1 Features 13 2.2
  • Bosch NDC-225-P | Operation Manual - Page 4
    5.5 5.6 5.7 5.7.1 5.8 Basic Mode Basic Mode menu tree Device Access Camera name Password Date/Time Network Encoder Profile Audio Recording Storage medium System Overview AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual IP Camera 200 Series 28 28 28 30 30 31 31 31 32 33 34 34
  • Bosch NDC-225-P | Operation Manual - Page 5
    IP Camera 200 Series 6.5.2 6.5.3 6.5.4 6.5.5 6.6 6.6.1 6.6.2 6.6.3 6.6.4 Alarm input Relay Network Network Advanced Multicasting JPEG Posting Service Maintenance System Overview Table of Contents | en 5 Controlling playback 91 Bosch Security Systems Installation and Operation Manual AR18-09-B003
  • Bosch NDC-225-P | Operation Manual - Page 6
    Troubleshooting 8.1 Resolving problems 8.2 Customer service 9 9.1 9.1.1 Maintenance Repairs Transfer and disposal 10 10.1 10.1.1 Technical Data Specifications Accessories IP Camera 200 Series 93 93 93 94 94 94 95 95 96 AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch
  • Bosch NDC-225-P | Operation Manual - Page 7
    IP Camera 200 Series 1 Safety Safety | en 7 1.1 Safety precautions DANGER! High risk: This symbol indicates an imminently avoided, this could result in property damage or risk of damage to the device. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 8
    8 en | Safety IP Camera 200 Series 1.2 Important safety instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Generally, using a dry cloth for
  • Bosch NDC-225-P | Operation Manual - Page 9
    IP Camera 200 Series Safety and used in accordance with the instructions, may cause harmful interference to radio Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. Bosch Security Systems Installation and Operation Manual
  • Bosch NDC-225-P | Operation Manual - Page 10
    | Safety IP Camera 200 Series Informations FCC cas d'installation ou d'utilisation non conforme aux instructions, engendrer des interférences nuisibles au niveau utile : How to Identify and Resolve Radio-TV Interference Problems. Cette brochure est disponible auprès du U.S. Government Printing
  • Bosch NDC-225-P | Operation Manual - Page 11
    IP Camera 200 Series Safety | en 11 1.4 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") For more information please contact the nearest Bosch Security Systems location or visit www.boschsecurity.com Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 |
  • Bosch NDC-225-P | Operation Manual - Page 12
    12 en | Safety IP Camera 200 Series 1.6 Copyrights The firmware 4.1 uses the fonts "Adobe both those copyright notices and this permission notice appear in supporting documentation, and that the names of Adobe Systems and Digital | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 13
    IP Camera 200 Series 2 Introduction Introduction | en 13 2.1 Features This IP camera is a ready-to-use, complete network video surveillance system inside a compact camera. The camera offers a cost-effective solution for a broad range of applications. It uses H.264 compression technology to give
  • Bosch NDC-225-P | Operation Manual - Page 14
    14 en | Introduction IP Camera 200 Series 2.2 Unpacking Unpack carefully and handle the equipment with care. The packaging contains: - IP camera with lens - Universal power supply with US, EU and UK plug - Installation paper sticker - Quick installation guide - CD ROM - BVIP Lite Suite -
  • Bosch NDC-225-P | Operation Manual - Page 15
    IP Camera 200 Series 3 Installation Installation | en 15 3.1 Disassembly The camera/housing unit consists of the following parts: x2 1. Dome 2. Inner liner 3. Camera module and mounting base To disassemble the unit proceed as follows: 1. Using the special screwdriver bit supplied, loosen the
  • Bosch NDC-225-P | Operation Manual - Page 16
    3.2 MicroSDHC card IP Camera 200 Series microSDHC Card Figure 3.1 MicroSDHC card 1. Disassemble the camera. 2. Slide the microSDHC card into the slot. The camera supports most microSD/SDHC cards. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 17
    IP Camera 200 Series Installation | en 17 3.3 Power connection The camera can accept power from both the DC12V power input and the Ethernet input at the same time. You can remove either one of the power sources without interrupting camera operation. 3.3.1 DC power connection 1 2 3 4 DC 12V
  • Bosch NDC-225-P | Operation Manual - Page 18
    18 en | Installation IP Camera 200 Series 3.4 Network (and power) connector 1 2 3 4 DC 12V Ethernet Line-out Line-in RJ45 Ethernet (PoE) Figure 3.3 Network connection - Connect the camera to a 10/100 Base-T network. - Use a shielded UTP Category 5e cable with RJ45 connectors. - Power can be
  • Bosch NDC-225-P | Operation Manual - Page 19
    IP Camera 200 Series Installation | en 19 3.5 I/O connector 1 2 3 4 DC 12V Ethernet Line-out Line-in 5 mm (0.2 in) Pin I/O 1 or +5 VDC activation. - Alarm input configurable as active low or active high. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 20
    20 en | Installation 3.6 Audio connectors IP Camera 200 Series 1 2 3 4 DC 12V Ethernet Line-out Line-in Line in: 9 kOhm typ., 200 mVrms Line out: 16 Ohm min. 200 mVrms (earphone compatible) Line - L GND Line - R Figure 3.5 Audio connectors Connect audio devices to the Line In and Line Out
  • Bosch NDC-225-P | Operation Manual - Page 21
    IP Camera 200 Series 3.7 Mounting x2 Ø 6 mm Installation | en 21 M4 (Ø3.3 mm) x2 Figure 3.6 Mounting the camera To mount the camera to a wall or ceiling: 1. Stick the supplied installation paper sticker to the surface taking care to orientate it correctly. 2. Drill two holes with a diameter of
  • Bosch NDC-225-P | Operation Manual - Page 22
    22 en | Installation IP Camera 200 Series 3.8 Camera set-up To help set up the camera, connect a monitor to the miniature 2.5 mm jack socket using a S1460 bright lights in the field of view of the camera. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 23
    IP Camera 200 Series Installation | en 23 Set the camera to the desired position by performing the following steps: 1. For horizontal adjustment (pan), rotate the camera module in the base. Do not rotate more than 350°. 2. For vertical adjustment (tilt), loosen thumbscrews, position camera, then
  • Bosch NDC-225-P | Operation Manual - Page 24
    24 en | Installation IP Camera 200 Series 3.8.2 Focal length and focus (NDC-255-P) Adjust the focal length and focus of the NDC-255-P as follows: . 5. Tighten both screws. NDC-255-P 1. Focal length 2. Focus AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 25
    IP Camera 200 Series Installation | en 25 3.9 Resetting the camera If the camera cannot be connected because the IP address has changed, press and hold the reset button (7 seconds approximately) until the LED flashes (red) to recall the factory default values. The factory default IP address is
  • Bosch NDC-225-P | Operation Manual - Page 26
    26 en | Browser connection IP Camera 200 Series 4 Browser connection A computer with Microsoft Internet Explorer can be used to receive live images from the camera, control cameras, and replay stored sequences. The camera is configured over the network using a browser or via the BVIP Lite Suite
  • Bosch NDC-225-P | Operation Manual - Page 27
    IP Camera 200 Series Browser connection | en 27 Note: If the connection is not established, the maximum number of possible connections may already have been reached. Depending on the device and network configuration, up to 25 web browsers, or 50 VIDOS or Bosch VMS connections are supported. 4.2.1
  • Bosch NDC-225-P | Operation Manual - Page 28
    28 en | Browser connection IP Camera 200 Series 4.4 Connection established When a connection is established, the LIVEPAGE is initially displayed. The application title bar displays the type number of the connected camera and three items: LIVEPAGE, RECORDINGS, SETTINGS. Note: The RECORDINGS link
  • Bosch NDC-225-P | Operation Manual - Page 29
    IP Camera 200 Series Browser connection | en 29 the configuration menu is opened. All settings (except date/ time) are stored in the camera memory so that they are retained, even if the power is interrupted. Changes that influence the fundamental functioning of the unit (for example, firmware
  • Bosch NDC-225-P | Operation Manual - Page 30
    Mode 5 Basic Mode IP Camera 200 Series 5.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured. not supported by the internal recording management system. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security
  • Bosch NDC-225-P | Operation Manual - Page 31
    IP Camera 200 Series Basic Mode | en 31 5.2 5.2.1 Device Access Camera name The camera can be assigned a name to assist in identifying it. The name simplifies the management of multiple devices in more extensive systems. The camera name is used for remote identification, for example, in the event
  • Bosch NDC-225-P | Operation Manual - Page 32
    32 en | Basic Mode IP Camera 200 Series Confirm password Re-enter the new password to ensure that there are no typing mistakes. The new password An incorrect date/time setting could prevent correct recording. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 33
    IP Camera 200 Series Basic Mode | en 33 5.4 Network Use the IP addresses. Note: Certain applications (for example, Bosch Video Management System) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must support the fixed assignment between IP
  • Bosch NDC-225-P | Operation Manual - Page 34
    34 en | Basic Mode IP Camera 200 Series 5.5 Encoder Profile Select a firmware system, including version numbers. No items can be changed on this page but they can be copied for information purposes when troubleshooting. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch
  • Bosch NDC-225-P | Operation Manual - Page 35
    IP Camera 200 Series 6 Advanced Mode Advanced Mode | en 35 6.1 Advanced Mode menu tree The advanced mode configuration menu contains all camera parameters that can be configured. Advanced Mode > General > Web Interface > Camera > Recording > Alarm > Interfaces > Network > Service To view the
  • Bosch NDC-225-P | Operation Manual - Page 36
    Mode IP Camera 200 Series 6.2 General General > Identification > Password > Date/Time > Display Stamping 6.2.1 Identification Camera ID Each camera should be assigned a unique identifier that can be entered here as an additional means of identification. Camera name Assign a camera name
  • Bosch NDC-225-P | Operation Manual - Page 37
    IP Camera 200 Series Advanced Mode | en 37 a password. For example, if a live password is assigned, a service and a user password should also be set. When assigning passwords, always it is added automatically. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 38
    38 en | Advanced Mode IP Camera 200 Series 2. Enter the current time or click Sync to PC to apply the system time from your computer to the device. by marking the row and selecting values from the list boxes. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 39
    IP Camera 200 Series Advanced Mode | en 39 9. When finished, click OK to save and activate the table. Time server IP address The camera can receive the time signal be useful for recorded video images; however, Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 40
    40 en | Advanced Mode IP Camera 200 Series it does increase the processor's computing time. Select Off if displaying milliseconds is not needed. Alarm that the sequence (live or saved) has been manipulated. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 41
    IP Camera 200 Series Advanced Mode | en 41 6.3 Web Interface Web Interface > Appearance > LIVEPAGE Functions > Logging 6.3.1 can be stored on a local computer, a local network, or at an Internet address. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 42
    42 en | Advanced Mode IP Camera 200 Series 6.3.2 LIVEPAGE Functions In this window, adapt the Livepage functions to meet your requirements. Choose from a variety and termination of connections, etc. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 43
    IP Camera 200 Series Advanced Mode | en 43 Allow snapshots Specify whether the icon for saving individual images should path for saving the system log here. If necessary, click Browse to find a suitable folder. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 44
    Installer Options IP Camera 200 Series 6.4.1 Encoder Profile Adapt the video data transmission to the operating environment (network structure, bandwidth, data structures). The camera simultaneously generates AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 45
    IP Camera 200 Series Advanced Mode | en 45 - MODEM QVGA resolution for analog modem connections at 22 kbps maximum settings for the I-frames and P-frames, this can result in individual images being skipped. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 46
    46 en | Advanced Mode IP Camera 200 Series The value entered here must be at least 10% higher than the value entered in the Target data rate field Default to return the profile to the factory default values. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 47
    IP Camera 200 Series Advanced Mode | en 47 6.4.2 Encoder Streams Select H.264 Settings 1. Select the codec algorithm for streams 1 and 2. the computer is adversely affected by the decoding of the data stream. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 48
    48 en | Advanced Mode IP Camera 200 Series JPEG stream Set the parmeters for the M-JPEG stream. - Select the Max. frame rate in images per second (IPS). - The Picture quality slider allows adjustment of the M- JPEG image quality from Low to High. Note: The JPEG resolution follows the highest
  • Bosch NDC-225-P | Operation Manual - Page 49
    IP Camera 200 Series Advanced Mode | en 49 It is only necessary to change Installer Options Disable the Camera LED on the camera to switch it off. Enable Mirror image to obtain a mirror image display of the camera picture. Bosch Security Systems Installation and Operation Manual AR18-09-B003 |
  • Bosch NDC-225-P | Operation Manual - Page 50
    Recording Profiles > Retention Time > Recording Scheduler > Recording Status IP Camera 200 Series Record the images from the camera to local storage media or to an appropriately configured iSCSI system ). AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 51
    IP Camera 200 Series For further information, contact your local customer service at Bosch Security Systems. 6.5.1 Storage Management Device manager the IP address is established. The Storage overview field displays the logical drives. Bosch Security Systems Installation and Operation Manual AR18
  • Bosch NDC-225-P | Operation Manual - Page 52
    52 en | Advanced Mode IP Camera 200 Series Local Media The supported local recording media is displayed in the storage overview field. Activating and Configuring stream 1, Recording 2 corresponds to stream 2. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 53
    IP Camera 200 Series Advanced Mode | en 53 Note: If older recordings are not allowed to be overwritten when the it. 2. Click Remove below the list. The storage medium is deactivated and removed from the list. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 54
    54 en | Advanced Mode IP Camera 200 Series 6.5.2 Recording Profiles Define up to ten different recording profiles here, then assign these to individual days or only. - Off: no automatic recording takes place. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 55
    IP Camera 200 Series Advanced Mode | en 55 Stream Select the data stream to be used for standard hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 56
    56 en | Advanced Mode IP Camera 200 Series 6.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be . AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 57
    IP Camera 200 Series Advanced Mode | en 57 Profile names Change the names of the recording profiles listed in the Time the recording status are displayed here for information. These settings cannot be changed. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 58
    IP Camera 200 Series 6.6.1 Alarm Connections Select the response of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP of destination IP address Specify the numbers of the IP addresses to Bosch Video Management System. AR18-09-B003 |
  • Bosch NDC-225-P | Operation Manual - Page 59
    IP Camera 200 Series Advanced Mode | en 59 The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Number of destination IP address list box. 2. Enter 0.0.0.0 in the Destination IP address field. 3. Enter the password in
  • Bosch NDC-225-P | Operation Manual - Page 60
    60 en | Advanced Mode IP Camera 200 Series documentation concerning image display options and available video outputs. Select On to automatically re-established a connection to one of the previously specified IP addresses after each reboot, connection breakdown, or network failure. Audio Select On
  • Bosch NDC-225-P | Operation Manual - Page 61
    IP Camera 200 Series Advanced Mode | en 61 6.6.2 Video Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorithms. Such changes can be due to movements in the camera's field of view. Select various VCA configurations
  • Bosch NDC-225-P | Operation Manual - Page 62
    62 en | Advanced Mode IP Camera 200 Series 6.6.3 VCA configuration- Profiles Configure two profiles with different VCA configurations. Save profiles on motion detector and essential recognition of tampering. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 63
    IP Camera 200 Series Advanced Mode | en 63 Metadata is always created for a video content analysis, unless this was that a moving object must cover to generate an alarm. This setting prevents objects that Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 64
    IP Camera 200 Series are series of tests at different times of the day and night to ensure that the video sensor is operating as intended. Sensitivity and Trigger delay (s) can only be changed if Reference check is selected. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch
  • Bosch NDC-225-P | Operation Manual - Page 65
    IP Camera 200 Series Advanced Mode | en 65 Sensitivity The basic sensitivity of the tamper detection can be adjusted for the environmental conditions to which the camera scene provides a basis for recognition. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 66
    66 en | Advanced Mode IP Camera 200 Series Scene too dark Activate this function if tampering associated with covering the objective (for instance, by immediately to indicate the inadequate reference image. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 67
    IP Camera 200 Series Advanced Mode | en 67 Appearing edges Select this option if the selected area of the Click the close button (X) in the window title bar to close the window without saving the changes. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 68
    68 en | Advanced Mode IP Camera 200 Series 6.6.4 VCA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and A new window opens. 2. Click the date to delete. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 69
    IP Camera 200 Series Advanced Mode | en 69 3. Click OK. The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 70
    70 en | Advanced Mode IP Camera 200 Series 6.6.5 VCA configuration - Event triggered This configuration allows you to stipulate that the video content analysis Silent MOTION+ configuration is always enabled. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 71
    IP Camera 200 Series Advanced Mode | en 71 6.6.6 Audio Alarm Create alarms based on audio signals. Configure effectively suppress individual signal peaks. A high value represents a high level of sensitivity. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 72
    72 en | Advanced Mode IP Camera 200 Series 6.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a video receiver. In this case, the camera automatically sends an e-mail to a user
  • Bosch NDC-225-P | Operation Manual - Page 73
    IP Camera 200 Series Advanced Mode | en 73 Destination address Enter the e-mail address for alarm e-mails here. The Send Now to test the e-mail function. An alarm e-mail is immediately created and sent. Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 74
    | Advanced Mode 6.7 Interfaces Interfaces > Alarm input > Relay IP Camera 200 Series 6.7.1 6.7.2 Alarm input Configure the alarm trigger for the camera. Select N.C. (Normally Closed) if the alarm is to be AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 75
    IP Camera 200 Series Advanced Mode | en 75 - Off Relay is not triggered by events - Trigger relay Click the button to switch the relay manually (for example, for testing purposes or to operate a door opener). Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 76
    Multicasting > JPEG Posting IP Camera 200 Series 6.8.1 Network The settings Bosch Video Management System, Archive Player, Configuration Manager) use the IP address for the unique assignment of the device. If using these applications, the DHCP server must support the fixed assignment between IP
  • Bosch NDC-225-P | Operation Manual - Page 77
    IP Camera 200 Series Advanced Mode | en 77 Gateway address For the device to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here. Otherwise, this field can remain empty (0.0.0.0). DNS server address The device is easier to access if it is
  • Bosch NDC-225-P | Operation Manual - Page 78
    Mode IP Camera 200 Series deactivates all unencrypted connections allowing connections on the HTTPS port only. RCP+ port 1756 Activating RCP+ port 1756 allows unencrypted connections on this port. To allow only encrypted connections, set the Off option to deactivate the port. Telnet support
  • Bosch NDC-225-P | Operation Manual - Page 79
    IP Camera 200 Series Advanced Mode | en 79 obtain an account with DynDNS.org and register the required host name for the device on that site. Note: Information about the service the registration by transferring the IP address to the DynDNS by the service provider. To transfer the IP address of the
  • Bosch NDC-225-P | Operation Manual - Page 80
    IP Camera 200 Series the changed settings are activated. SNMP The camera supports the SNMP V2 (Simple Network Management Protocol) camera in the Identity field. 2. Enter the Password that the Radius server expects from the camera. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch
  • Bosch NDC-225-P | Operation Manual - Page 81
    IP Camera 200 Series Advanced Mode | en 81 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554. Select Off to deactivate the RTSP function. 6.8.3 Multicasting In addition to a one-to-one connection between a camera and a
  • Bosch NDC-225-P | Operation Manual - Page 82
    82 en | Advanced Mode IP Camera 200 Series setting 0.0.0.0 the encoder for the stream operates in multiunicast mode (copying of data stream in device). The camera supports multi-unicast connections for up to five simultaneously-connected receivers. Duplication of data places a heavy demand on the
  • Bosch NDC-225-P | Operation Manual - Page 83
    IP Camera 200 Series Advanced Mode | en 83 correctly . For eample, the file snap011005_114530.jpg was stored on October 1, 2005 at 11.45 and 30 seconds. Posting interval Enter the interval in seconds at which the images are sent to an FTP server. Enter zero for no images to be sent. FTP server IP
  • Bosch NDC-225-P | Operation Manual - Page 84
    84 en | Advanced Mode 6.9 Service Service > Maintenance > System Overview IP Camera 200 Series 6.9.1 Maintenance CAUTION! Before starting a firmware update, make sure to select the correct upload file. Uploading the wrong files can result in the device no longer being addressable, requiring it
  • Bosch NDC-225-P | Operation Manual - Page 85
    IP Camera 200 Series Advanced Mode | en 85 going to reset Reconnecting in ... seconds. When the upload be rebooted. In the address field of the browser, enter /reset after the camera's IP address, for example: Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 86
    86 en | Advanced Mode IP Camera 200 Series 192.168.0.10/reset The new SSL certificate is valid. Maintenance log Download an internal maintenance log from the device to send it to Customer Service for support purposes. Click Download and select a storage location for the file. 6.9.2 System
  • Bosch NDC-225-P | Operation Manual - Page 87
    IP Camera 200 Series Operation via the browser | en 87 7 Operation via the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. Bosch Security Systems Installation and Operation Manual
  • Bosch NDC-225-P | Operation Manual - Page 88
    88 en | Operation via the browser IP Camera 200 Series 7.1.2 Image selection View the image on a full screen. 1. Click the Stream 1, Stream 2 or M-JPEG tab below the video image to switch between the different displays for the camera image. 7.1.3 Digital I/O Depending on the configuration of
  • Bosch NDC-225-P | Operation Manual - Page 89
    IP Camera 200 Series Operation via the browser | en 89 sequences are recorded at the resolution specified in the encoder configuration. The storage location depends on the configuration of the camera. 1. Click the recording icon to record video sequences. - Saving begins immediately. The red
  • Bosch NDC-225-P | Operation Manual - Page 90
    90 en | Operation via the browser IP Camera 200 Series 7.2 Recordings page Access the Recordings page for playing back recorded video sequences from the Livepage as the Recordings page is displayed correctly. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 91
    IP Camera 200 Series 7.2.1 Controlling playback Operation via the browser | en 91 A time bar below the video image the list Slide control Continuously select playback speed by means of the speed regulator: Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
  • Bosch NDC-225-P | Operation Manual - Page 92
    92 en | Operation via the browser IP Camera 200 Series Bookmarks In addition, set markers in the sequences, so-called bookmarks, and jump directly to significantly higher memory capacity and computing power. AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 93
    IP Camera 200 Series 8 Troubleshooting Troubleshooting | en 93 8.1 Resolving problems The following table is intended to help identify the causes of malfunctions and correct them when possible. Malfunction Possible causes Solution No image transmission to
  • Bosch NDC-225-P | Operation Manual - Page 94
    IP Camera 200 Series 9.1 9.1.1 Repairs CAUTION! Never open the casing of the camera. The unit does not contain any user serviceable technical service center. Transfer and disposal The camera should only be passed-on together with this installation guide. and Operation Manual Bosch Security Systems
  • Bosch NDC-225-P | Operation Manual - Page 95
    IP Camera 200 Series 10 mm, F1.2 to close (NDC-255-P) Fixed 4 mm, F1.5 (NDC-225-P) Alarm Input Short or 5 VDC Supports up to 32 GB microSD/SDHC card Recording Continuous recording, ring recording. alarm/ events/schedule recording Bosch Security Systems Installation and Operation Manual
  • Bosch NDC-225-P | Operation Manual - Page 96
    Data IP Camera 200 Series Unit Configuration Protocols Ethernet PoE Dimensions Weight Operating Temperature (Camera) RJ45 IEEE 802.3af compliant Diameter: 135 mm (5.32 in) Height: 101.5 mm (4 in) NDC-255-P: 548 g (1.21 lb) approx. NDC-225-P: 523 g (1.16 lb) approx. -10 ºC to +50 ºC (14 ºF to +122
  • Bosch NDC-225-P | Operation Manual - Page 97
  • Bosch NDC-225-P | Operation Manual - Page 98
    Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2012
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
IP Dome Camera 200 Series
NDC-255-P / NDC-225-P
en
Installation and Operation Manual