Bosch NWC-0455-20P Operating Instructions

Bosch NWC-0455-20P Manual

Get Bosch NWC-0455-20P PDF manuals and user guides View all Bosch NWC-0455-20P manuals
Add to My Manuals
Save this manual to your list of manuals

Bosch NWC-0455-20P manual content summary:

  • Bosch NWC-0455-20P | Operating Instructions - Page 1
    Dinion IP NWC-455-10P | NWC-455-20P en Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 2
  • Bosch NWC-0455-20P | Operating Instructions - Page 3
    Dinion IP Table of Contents service monitor 2.4 Alarm connector 3 Mounting 3.1 Lens mounting 3.2 Mounting the camera 4 4.1 4.2 4.2.1 Quick set-up Back focus adjustment Accessing and navigating quick set-up menu How to use the navigation keys Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 4
    4 en | 4.2.2 4.3 4.4 4.5 4.6 4.7 Install menu Adjustment procedure DC-iris Lens Adjustment procedure Manual-iris Lens Adjustment procedure Video-iris Lens Install IP address submenu Defaults Dinion IP 28 28 29 29 29 30 5 Network connection 31 5.1 System requirements 31 5.2 Establishing
  • Bosch NWC-0455-20P | Operating Instructions - Page 5
    Deleting partitions Recording profile Recording scheduler Activating recording Recording status Alarm Settings Alarm in Alarm connections VCA Analysis Analysis type Bosch Security Systems Operating Instructions | en 5 48 50 53 55 55 56 57 58 58 59 59 60 60 61 61 61 61 61 62 62 62 62 63 63 65
  • Bosch NWC-0455-20P | Operating Instructions - Page 6
    IP address Layout Destination address Sender name Send e-mail for testing Relay Settings Alarm out Service 10.2 10.2.1 Maintenance Testing the network connection Repairs Transfer and disposal V 2.5 | 2007.6 Operating Instructions Dinion IP 77 78 79 81 81 81 82 82 82 82 82 83 84 84 87 89 90 91
  • Bosch NWC-0455-20P | Operating Instructions - Page 7
    Dinion IP 11 Troubleshooting 12 12.1 12.2 12.2.1 12.2.2 Specifications Dimensions (mm/inch) Accessories Recommended lenses Power transformers 13 Glossary | en 7 101 103 105 106 106 106 107 Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 8
    Dinion IP Important safety instructions Read, follow, and retain all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions outdoor
  • Bosch NWC-0455-20P | Operating Instructions - Page 9
    Dinion IP | en 9 230 VAC, 50 Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245. For outdoor use the power cord must comply to NEC400-4 (CEC Rule 4-010) and marked with OUTDOOR, W, or W-A. . 8. Power sources - Operate the unit
  • Bosch NWC-0455-20P | Operating Instructions - Page 10
    10 en | Dinion IP - unit exhibits a distinct change in performance; - unit does not operate normally when the user cor- rectly follows the operating instructions. 11. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same
  • Bosch NWC-0455-20P | Operating Instructions - Page 11
    Dinion IP | en 11 DANGER! High risk: The lighting flash and arrowhead within the death. WARNING! Medium risk: ! The exclamation point within the triangle sign alerts the user to important instructions accompanying the unit. CAUTION! ! Alerts the user to the risk of damage to the unit.
  • Bosch NWC-0455-20P | Operating Instructions - Page 12
    Dinion IP CAUTION! - Camera Grounding - For mounting the camera mount and supporting structure, grounding lines - Do not locate the camera near overhead power lines, power circuits video recording; therefore, Bosch Security Systems cannot be digital information, Bosch Security Systems recommends
  • Bosch NWC-0455-20P | Operating Instructions - Page 13
    Dinion IP | en 13 FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 14
    14 en | Dinion IP Disposal Your Bosch product was developed and manufactured with high-quality material information, please contact the Bosch Security Systems location nearest you or visit our web site at www.boschsecuritysystems.com V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 15
    over data networks such as Ethernet LANs and the Internet. The Dinion IP camera is easy to install and ready to use, and offers the best a browser - Firmware update through flash memory - Convenient upload and download of configuration data Bosch Security Systems Operating Instructions V 2.5
  • Bosch NWC-0455-20P | Operating Instructions - Page 16
    CCD type NWC-0455-10P NWC-0455-20P 50 Hz 60 Hz 24 VAC or 12 VDC (use class 2 power supply) or PoE (IEEE 802.3af) 1/3" Table 1.1 Dinion IP type numbers 1.2 i Unpacking Unpack carefully and handle the equipment with care. The packaging contains: - DinionXF IP camera - CS to C lens mount
  • Bosch NWC-0455-20P | Operating Instructions - Page 17
    camera IP network. With its MPEG-4 encoding it is ideally suited for IP communication and for remote access to digital video recorders and multiplexers. The use of existing networks means that integration with CCTV systems or local networks can be Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 18
    18 en | Introduction Dinion IP 1.4.1 1.4.2 1.4.3 1.4.4 1.4.5 1.4.6 achieved quickly and easily. Video images from a single camera can be simultaneously received on several receivers. Wide dynamic range The digital signal is automatically processed in the camera to optimally capture the detail in
  • Bosch NWC-0455-20P | Operating Instructions - Page 19
    Dinion IP Introduction | en 19 1.4.7 1.4.8 1.4.9 1.4. camera can be configured using a browser on the local network (Intranet) or from the Internet. Similarly, firmware the Player from Bosch Security Systems included with the package. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 20
    20 en | Introduction Dinion IP 1.4.13 Intelligent Video Motion Detection The intelligent video motion detection (iVMD) system of the camera uses advanced analysis algorithms with comprehensive functions for the detection of motion. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 21
    Dinion IP Connections | en 21 2 Connections CAUTION! ! Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes. CAUTION! ! The camera Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 22
    connect a service monitor to the composite video BNC connector to aid installation. - a monitor connected close to the camera via this connection can also be used in parallel with remote PC viewing. Fig. 2.3 Service monitor connection V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 23
    , +5V nominal, +40VDC max, DC coupled with 22kOhm pull-up to +3.3V. - Alarm in: configurable as active low or active high. - Max. 42V allowed between camera ground and each of the relay pins. Fig. 2.4 Network and power connection Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 24
    24 en | Mounting 3 Mounting Dinion IP 3.1 ! Lens mounting The camera accepts CS-mount lenses with a lens protrusion of up to 5mm. C-mount lenses can be mounted using the lens adapter ring. DC-iris lenses are recommended for the best picture performance. The camera automatically detects the type
  • Bosch NWC-0455-20P | Operating Instructions - Page 25
    Dinion IP Mounting | en 25 3.2 Mounting the camera The camera can be mounted from the top or bottom. The bottom mounting is isolated from ground. With outdoor scenes, a DC-iris lens is recommended. CAUTION! ! Do not point the camera/lens into direct sunlight. Do not obstruct the free flow of
  • Bosch NWC-0455-20P | Operating Instructions - Page 26
    The Dinion IP camera normally provides an optimal picture without the need for further adjustments. Configuration of the camera is carried out remotely via the network using a web browser. However, the camera also has an Installer menu in which basic installation settings (lens wizard, IP address
  • Bosch NWC-0455-20P | Operating Instructions - Page 27
    Dinion IP Quick set-up | en 27 Bosch 4.2 4. Lock the back focus locking button. Accessing and navigating quick set-up menu Five keys, menu. - Press the menu/select key for approximately 1.5 seconds to open the Installer menu. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 28
    Select submenu Exit Description Select to optimize camera lens combination Select to set the network IP address for the camera (default address is 192.168.0.1) Exit the menu Install lens wizard submenu Function Lens Type Detected Selection AUTO, MANUAL, DCIRIS, VIDEO Set Back Focus Now Set
  • Bosch NWC-0455-20P | Operating Instructions - Page 29
    Dinion IP Quick set-up | en 29 4. Turn the back focus adjustment as required. 5. Lock the back focus locking button. 6. Exit the menu. 4.4 Adjustment procedure Manual-iris Lens 1. Unlock the back focus locking button. 2. Adjust the lens to the maximum lens opening. 3. Turn the back focus
  • Bosch NWC-0455-20P | Operating Instructions - Page 30
    30 en | Quick set-up Dinion IP Subnet Mask Gateway Exit Enter the Subnet mask (default 255.255.255.0) Enter a Gateway address. Return to the Install menu The new IP address, subnet mask and gateway address are set after you leave the menu. The camera reboots internally and the new values are set
  • Bosch NWC-0455-20P | Operating Instructions - Page 31
    Establishing the connection The camera must be assigned a valid IP address to operate on your network. The default address pre-set at the factory is 192.168.0.1 1. Start the Web browser. 2. Enter the IP address of the camera as the URL. Bosch Security Systems Operating Instructions V 2.5 | 2007
  • Bosch NWC-0455-20P | Operating Instructions - Page 32
    | Network connection Dinion IP Password protection in camera If the camera is password-protected, a message to enter the password appears. NOTE! i A camera offers you the option , or 50 VIDOS or BVMS connections are supported. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 33
    Dinion IP Network connection | en 33 5.3 Secured network If a Radius server is used for network access control (802.1x authentication), the camera must be configured first. To configure the camera for a Radius network, connect it directly to a PC via a crossed network cable and configure the two
  • Bosch NWC-0455-20P | Operating Instructions - Page 34
    camera with a browser, the processor load is displayed in the upper right of the window next to the Bosch logo. Move the mouse cursor over the icons to display numerical values. This information can help with problem solving or when fine tuning the device. V 2.5 | 2007.6 Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 35
    Dinion IP Operation via the browser | en 35 6.1.2 6.1.3 Image selection You can view the image on a full screen. - Click one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M- JPEG tabs below the video image to switch between the different displays for the camera image. Digital I/O 6.1.4 Depending
  • Bosch NWC-0455-20P | Operating Instructions - Page 36
    Dinion IP 6.1.6 1. Click the camera icon to save single images. 2. The image is saved at a resolution of 704 × 576/480 pixels (4CIF). The storage location depends on the configuration of the camera the Player from Bosch Security Systems, 5. Follow the instructions in the installation program
  • Bosch NWC-0455-20P | Operating Instructions - Page 37
    Dinion IP Operation via the browser | en 37 6.1.7 6. After a successful installation, two new icons for the Player and the Archive Player appear on the desktop. 7. Double click the Player icon to start the Player. Running recording program The hard drive icon below the camera images on the
  • Bosch NWC-0455-20P | Operating Instructions - Page 38
    38 en | Operation via the browser . Dinion IP 6.2.1 6.2.2 Selecting recordings In the left section of the page, first select the partition whose image for quick orientation. If a particular sequence has been selected for playback by V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 39
    Dinion IP Operation via the browser | en 39 in the time scale to jump to the position selected in this manner. The date and time display below the bar provides orientation to the second. You can control middle indicates playback at Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 40
    40 en | Operation via the browser Dinion IP recording speed, left indicates rewind, and right fast forward. The fast forward or rewind speed changes, saved with the sequences. As soon as you leave the page all bookmarks are deleted. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 41
    Dinion IP Configuration via the browser | en 41 7 Configuration via the browser 7.1 Settings When a connection is established, the Livepage is initially displayed. Click Settings in the application title bar to configure the camera and the application interface. A new page containing the
  • Bosch NWC-0455-20P | Operating Instructions - Page 42
    42 en | Configuration via the browser Dinion IP You can view the current settings by opening one of the configuration pages. 1. Click one of the saves only the settings in the current window. Changes in any other fields are ignored. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 43
    Dinion IP Configuration via the browser | en 43 Click the Settings link at the top of the window to close the window without saving the changes made. 7.2 General Settings 7.2.1 Various basic data for the camera can be set or selected here. Camera identification Camera name The camera can be
  • Bosch NWC-0455-20P | Operating Instructions - Page 44
    Dinion IP A camera is assigned, a service and a user camera recognizes three user names: service, user and live, which correspond to different authorization levels. - The user name service unit and also to control cameras, but you cannot change you are logged on as Service or if the unit is
  • Bosch NWC-0455-20P | Operating Instructions - Page 45
    date. Since the unit time is controlled by the internal clock, it is not necessary to enter the day of the week. This is added automatically. 2. Enter the current time or click Synchr. PC to apply the system time from your computer to the camera. Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 46
    browser 7.2.5 Time server Dinion IP The camera supports several network time server table, note that values generally occur in linked pairs (DST start and end dates). First check the time zone setting. If it is not correct select the appropriate .6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 47
    time and date overlay. It can be displayed at the Top, at the Bottom or at a position of your choice, which you have pre-defined using HyperTerminal, using the Custom option. Or it can be set to Off if no overlay of this information is to be shown. Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 48
    48 en | Configuration via the browser Dinion IP Alarm mode stamping Choose On if a text message should be overlaid in the event of an MPEG-4 data transmission to the operating environment (for example network structure, bandwidth, data V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 49
    Dinion IP Configuration via the browser | en 49 structures). To do this, the camera simultaneously generates two data streams (Dual Streaming), for which you can selected is marked by a frame. Various additional items of infor- Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 50
    50 en | Configuration via the browser Dinion IP mation regarding data transmission are displayed and continually updated above the previews. 1. Click a tab be changed if you are completely familiar with all the configuration options. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 51
    Dinion IP Configuration via the browser | en bandwidth in your network, you can limit the data rate for the camera. The target data rate should be set according to the desired picture quality × 576/480 pixels - 2/3 D1 464 × 576/480 pixels Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 52
    the browser Dinion IP Default the optimum relationship between movement and image definition (focus). Selecting Manual allows you to set a value between 4 and 31 on adjusts the quality to the settings for the P-frame video quality. Selecting Manual allows you to set a value between 4 and 31 on a
  • Bosch NWC-0455-20P | Operating Instructions - Page 53
    Dinion IP Configuration via Date/time suffix: The date and time are automatically added to the file name. When setting this parameter, please ensure that the date and time of the unit are always correctly set. Example: the file snap021606_124530.jpg Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 54
    the browser Dinion IP was stored camera Check the box to activate one or more camera inputs for the JPEG image. An enabled camera input is indicated by a check mark. NOTE! i The numbering follows the labeling of the video inputs on the actual unit. V 2.5 | 2007.6 Operating Instructions Bosch
  • Bosch NWC-0455-20P | Operating Instructions - Page 55
    Dinion IP 7.5 Camera settings Configuration via the browser | en 55 NOTE! i If the camera is in monochrome mode, all color related menu items are disabled and cannot be accessed. 7.5.1 ALC Video level Adjust the video output level (-15 to 0 to +15). Shutter - AES (auto-shutter) - the camera
  • Bosch NWC-0455-20P | Operating Instructions - Page 56
    Dinion IP Gain When the Gain mode is On, the camera automatically sets the gain to the lowest possible value needed to maintain a good picture. NightSense™ Nightsense™ extends the low-light performance of the camera. - In AUTO mode, the camera | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 57
    Dinion IP 7.5.3 Color Configuration via the browser | en 57 White Balance - ATW: Auto tracking white balance allows the camera to constantly adjust for optimal color reproduction. - AWB white point offset for special scene conditions. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 58
    Dinion IP 7.6 Select the synchronization method for the camera: Internal for free running camera operation; Line Lock to lock to the power supply frequency. You can disable the buttons on the camera service at Bosch Security Systems. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 59
    Dinion IP Configuration via the browser | en 59 7.6.1 i Type Select the desired storage medium to subsequently configure the entries. Entries are deleted immediately; you cannot undo this process. 3. Click Close to close the window. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 60
    7.7 iSCSI settings Dinion IP i 7.7.1 If you select type iSCSI server as the storage medium, you then need to set up a connection to the desired iSCSI storage device and set the configuration parameters. NOTE! The storage device selected must adhere to the iSCSI specification, be available on
  • Bosch NWC-0455-20P | Operating Instructions - Page 61
    Dinion IP Configuration via the browser | en be read due to the network topology you must enter the data manually so that the camera can access the drive. In this case you should ensure that the configuring the iSCSI storage device. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 62
    Dinion IP 7.7.7 7.7.8 7.7.9 7.7.10 Initiator name The initiator name is automatically displayed after a connection has been established. Initiator extension Enter the initiator extension. For the sake of clarity, you can enter a name or the existing extension with a comment, for example "- Camera
  • Bosch NWC-0455-20P | Operating Instructions - Page 63
    Dinion IP 7.8 Partitioning Configuration via the browser | en 63 7.8.1 A partition can be set up for recordings of the camera in a similar manner to the partitioning often found for creating parti- tions. The first window appears. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 64
    64 en | Configuration via the browser . Dinion IP 2. Read the information text in the upper section of the window. 3. Click in the text fields to in the last window by clicking Finish. 1. Switch to the last window if necessary. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 65
    Dinion IP Configuration via the browser | en 65 7.8.2 2. Click Finish to complete the configuration. All settings are now , you should back up all important sequences on the computer's hard drive before modifying the partition. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 66
    66 en | Configuration via the browser Dinion IP 1. Click Edit partition. - A new window with the entries for the selected partition is opened. You can modify of alarm tracks NOTE! i Alarm tracks must be set up for alarm recording. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 67
    Dinion IP Configuration via the browser | en 67 The unit uses a special recording mode during alarm recording for important sequences on the computer's hard drive. - Click Format! to delete all recordings in the current partition. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 68
    68 en | Configuration via the browser Dinion IP 7.8.4 ! Deleting partitions You can delete a partition at any time. CAUTION! Deleting a partition leads to the names of the recording profiles on the tabs in the Recording planner page. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 69
    Dinion IP Configuration via the browser | en 69 1. Click one of the tabs to edit the corresponding profile. 2. Click Default to profile and is only used during an active recording. Encoder Select which data stream to record here. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 70
    70 en | Configuration via the browser Dinion IP Alarm track recording This parameter is only active, if the alarm tracks have been configured. - Click . Motion detection/video alarm Select the alarm type that is to trigger a recording. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 71
    Dinion IP Configuration via the browser | en 71 7.10 Recording scheduler Set all parameters for recording. Recording can be performed . 4. Click Select all to select all of the intervals to be assigned to the selected profile. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 72
    | Configuration via the browser Dinion IP 5. Click Clear all to Add. This opens a new window. 3. Select the desired date from the calendar. Drag the mouse to select a range of dates. These are handled as a single entry in the table. . V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 73
    Dinion IP the possible alarm triggers for the camera. Alarm input Select Active Low if IP connection. Name You can enter a name for each alarm input, which is then displayed below the icon for the alarm input on the Livepage during configuration. Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 74
    connections Dinion IP You can select the response of the camera when an alarm occurs. In case of an alarm, the camera can automatically establish a connection to a predefined IP address if more than ten connections are required, for V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 75
    Dinion IP Configuration via the browser | en 75 example when connections are initiated by a controlling system such as VIDOS or BVMS. The camera connects to all devices protected by the same general password. To define a general password: 1. Select 10 in the Number of Destination IP-address list
  • Bosch NWC-0455-20P | Operating Instructions - Page 76
    VCA Dinion IP 7.12.1 The camera contains an integrated Video Content Analysis (VCA), which can detect and analyze changes in the signal. Such changes can be due to movements in the camera's field which movement is registered light up. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 77
    Dinion IP Configuration via the browser | en 77 NOTE! i On the Livepage configuration page, you can enable additional information NOTE! i For indoor surveillance, ensure constant lighting of the areas during the day and at night. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 78
    Dinion IP 7.12.4 Sensitivity Sensitivity is available for the Motion+ analysis type. The basic sensitivity of the motion detector can be adjusted for the environmental conditions to which the camera . Activated fields are marked red. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 79
    Dinion IP the changes. Tamper detection You can detect the tampering of cameras and video cables by means of various options. Run for the environmental conditions to which the camera is subject. The algorithm reacts to the direct field of vision of the camera. Scene too bright Activate this function
  • Bosch NWC-0455-20P | Operating Instructions - Page 80
    | Configuration via the browser Dinion IP objective) should trigger an alarm to detect tampering that would otherwise not be detected, for example if the camera is turned. 1. Click Reference to save the currently visible video image as V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 81
    Dinion IP not have a video receiver. In this case the camera automatically sends an e-mail to a user defined e-mail IP address Enter the IP address of a mail server that operates on the SMTP standard (Simple Mail Transfer Protocol). Outgoing e-mails are Bosch Security Systems Operating Instructions
  • Bosch NWC-0455-20P | Operating Instructions - Page 82
    82 en | Configuration via the browser Dinion IP 7.13.3 i sent to the mail server via the address you entered. Otherwise leave the box blank Relay Settings Here, you can make the settings for the alarm sources and alarm connections. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 83
    Dinion IP 7.14.1 Alarm out Configuration via the browser | en 83 Select the event that will the relay icon. Trigger relay Click the button to switch the relay manually (for example for testing purposes or to operate a door opener). Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 84
    active until the device is restarted. - Click Set after entering a new IP address. - To do this, enter the old IP address followed by / reset (for instance 192.168.0.80/reset) in the address bar of your web browser. When the camera is V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 85
    ports. The camera uses the TLS 1.0 protocol. Ensure that the browser has been configured to support this protocol. Also ensure that Java application support is activated (in the Java Plug-in Control Panel of the Windows Control Panel). Bosch Security Systems Operating Instructions V 2.5 | 2007
  • Bosch NWC-0455-20P | Operating Instructions - Page 86
    sufficient for transmission of the maximum data rate generated by the camera. 1. SNMP host address / 2. SNMP host address The camera supports the SNMP V2 (Simple Network Management Protocol) for managing and monitoring network compo- V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 87
    Dinion IP Configuration via the browser | en 87 nents and can send SNMP messages (traps) to IP addresses. It supports SNMP MIB II in the unified code. If you wish to send SNMP traps, enter the IP addresses of one or two required target devices here. To choose which traps are sent: 1. Click Select.
  • Bosch NWC-0455-20P | Operating Instructions - Page 88
    Dinion IP not supported. The TCP protocol does not support multicast connections. A special IP address multicast-enabled network. The network must support group IP addresses and the Internet Group Management of data streams in unit). The camera supports multi-unicast connections for up to five
  • Bosch NWC-0455-20P | Operating Instructions - Page 89
    Dinion IP Configuration via the browser | en 89 7.15.3 i Port If there are simultaneous data streams at the same clicking). 4. Click Clear keys to delete the keys for the marked streams. These streams are no longer encrypted. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 90
    via the browser Dinion IP 7.15.4 5. Click Generate keys to generate new keys for marked streams. 6. Click Edit to enter a key for a marked entry manually. Automatic key exchange: Mark this checkbox to activate an automatic key exchange between two devices (or the camera and a software decoder
  • Bosch NWC-0455-20P | Operating Instructions - Page 91
    Dinion IP Configuration via the browser | en 91 7.15.5 Livepage configuration In this there must be a connection in order to display the image. The image files are not stored on the camera. 1. Mark the check boxes for the information to be displayed on the Livepage. The selected elements are
  • Bosch NWC-0455-20P | Operating Instructions - Page 92
    92 en | Configuration via the browser Dinion IP Logo URL Enter the path to a suitable background graphic in this field. stream. Show event log The event messages are displayed with the date and time in a field next to the video image. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 93
    Dinion IP Configuration via the browser | en 93 7.15.6 Show system log The system messages are displayed with the date and time in a field next to the video enter the activation key to release additional functions or software modules. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 94
    . Thus a camera can be serviced and updated remotely without requiring a technician to make changes to the unit on site. The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. V 2.5 | 2007.6 Operating Instructions Bosch Security
  • Bosch NWC-0455-20P | Operating Instructions - Page 95
    Dinion IP Configuration via the browser | en 95 NOTE! A firmware update resets all camera parameters to their factory default values. If you wish to retain the old values first i save the configuration by performing a configuration download. After the firmware update you can reload your
  • Bosch NWC-0455-20P | Operating Instructions - Page 96
    via the browser Dinion IP Configuration upload 1. camera be called remotely? - Does the camera transmit all the data required? - Does the camera respond as desired to alarm events? - Is it possible to control peripheral devices if necessary? V 2.5 | 2007.6 Operating Instructions Bosch
  • Bosch NWC-0455-20P | Operating Instructions - Page 97
    Dinion IP Connections between video servers | en 97 8 8.0.1 i Connections between video servers A camera can be used as a transmitter and a compatible MPEG4 hardware this case, no computer is needed to establish the connection. Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 98
    en | Connections between video servers Dinion IP 8.0.4 i Connecting with a home page is displayed. Under Video sources on the page Connections, select the camera. A JPEG snapshot of the selected video source is displayed on the page. V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 99
    Dinion IP Operation with decoder software | en 99 9 Operation with decoder software VIDOS The camera hybrid DVR with additional analog camera and audio inputs. DiBos supports various functions of the camera, such as controlling relays, Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 100
    or network technology specialists). In case of doubt, contact your dealer's technical service center. 10.2.1 Transfer and disposal The camera should only be passed on together with this installation guide. The unit contains environmentally hazardous materials that must be disposed of according
  • Bosch NWC-0455-20P | Operating Instructions - Page 101
    Dinion IP Troubleshooting | en 101 11 Troubleshooting If you cannot resolve a fault, please contact your supplier or system integrator or go direct to Bosch Security Systems Customer Service to remote location. Possible causes Defective camera. Faulty cable connections. No connection estab
  • Bosch NWC-0455-20P | Operating Instructions - Page 102
    Troubleshooting Dinion IP after firmware gramming by the update file. tomer Service and replace if neces- upload. sary. Incorrect update file. Enter the IP address support the use of initiator parameter configuration page. identification. V 2.5 | 2007.6 Operating Instructions Bosch Security
  • Bosch NWC-0455-20P | Operating Instructions - Page 103
    Dinion IP Specifications | en 103 12 Specifications Type number Standard Active pixels Rated supply voltage NWC-0495-10P NWC-0495-20P PAL NTSC 752x582 768x492 24 VAC or 12 VDC or Power-over-Ethernet (IEEE 802.3af) 12-28 mode and manual Color saturation Lens Mount ALC lens Power
  • Bosch NWC-0455-20P | Operating Instructions - Page 104
    104 en | Specifications Image resolutions (PAL/NTSC) Total delay Image refresh rate Field/image-based coding /NTSC, MPEG-4, no network delay) 1 ... 50/60 fields/s adjustable (PAL/NTSC) TCP, UDP, IP, HTTP, IGMP V2, ICMP, ARP Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 105
    Dinion IP 12.1 Dimensions (mm/inch) Specifications | en 105 118 (4.646") 34 (1.339") 85 (3.346") 1/4"-20 UNC 48 (1.889") 1/4"-20 UNC 123 (4.843") 67 (2.638") 59 (2.323") Dimensions in mm (inches). Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 106
    106 en | Specifications Dinion IP 12.2 12.2.1 12.2.2 Accessories Recommended lenses LTC 3764/20 Varifocal Lens - 1/2-inch, 4 -12 mm, DC-iris, C-mount, F/1.2-360, 4 pin LTC 3774/30 Varifocal Lens - 1/2-inch, 10 - 40 mm, DC-iris, C-mount, F/1.4-360, 4-pin LTC 3783/50 Zoom Lens - 1/2-inch, 8.5 - 85
  • Bosch NWC-0455-20P | Operating Instructions - Page 107
    Dinion IP Glossary | en 107 13 Glossary Brief explanations of some of the terms and abbreviations found in this user guide are given below. 10/100 Base-T 802.1x ARP Baud Bit/s CIF DNS DHCP FTP Full duplex Gateway GOP HTTPS HTTP ICMP ID IEEE IGMP Internet Protocol IEEE 802.3 specification for 10
  • Bosch NWC-0455-20P | Operating Instructions - Page 108
    Parameters QCIF RADIUS server RFC 868 V 2.5 | 2007.6 Dinion IP See Internet Protocol A 4-byte number uniquely defining each device /120 pixels RADIUS server Remote Authentication Dial-in User Service is a client-server protocol for authentication, authorization, Instructions Bosch Security Systems
  • Bosch NWC-0455-20P | Operating Instructions - Page 109
    Dinion IP Glossary | en 109 RS232/RS422/RS485 RTP SNTP SSL Subnet mask TCP Telnet TSL TTL UDP URL UTP WAN Twisted Pair See wide area network A long distance link used to extend or connect remotely located local area networks Bosch Security Systems Operating Instructions V 2.5 | 2007.6
  • Bosch NWC-0455-20P | Operating Instructions - Page 110
    Bosch Security Systems Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.boschsecuritysystems.com © Bosch Security Systems, 2007
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Dinion IP
NWC-455-10P | NWC-455-20P
en
Operating Instructions