Bosch VIPX1A Quick Installation Guide
Bosch VIPX1A Manual
 |
View all Bosch VIPX1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Bosch VIPX1A manual content summary:
- Bosch VIPX1A | Quick Installation Guide - Page 1
VIP X1/VIP X2 - Network video server - Bosch VIPX1A | Quick Installation Guide - Page 2
user's manual. These instructions "Quick Installation Guide" refer to the units VIP X1 and VIP X2, both in basic and in audio version. The title shows the basic versions of VIP X1 and VIP X2. In the drawings the VIP X1 in audio version is displayed standing for all versions. Bosch Security Systems - Bosch VIPX1A | Quick Installation Guide - Page 3
VIP X1/VIP X2 | Quick Installation Guide Contents of Delivery • VIP X1 (or VIP X2) Network Video Server, basic version or audio version • Power outlet with four primary adapters • Configuration cable • CD-ROM • Quick Installation Guide EN | 3 Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 4
EN | 4 1. Unpack the Box VIP X1/VIP X2 | Quick Installation Guide • Please check the delivery for completeness and integrity. • Have your unit checked by Bosch Security Systems if you detect any damages! Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 5
VIP X1/VIP X2 | Quick Installation Guide 2. Connect the Camera EN | 5 • VIP X1: Connect the camera with the Video In socket. • VIP X2: Connect one camera to each, the Video In 1 socket and the Video In 2 socket. Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 6
EN | 6 VIP X1/VIP X2 | Quick Installation Guide 3. Connect the Audio Components (Audio Versions Only) • Use the jack sockets for audio line connections. • Connect the microphone and the speaker connection to the corresponding terminals. Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 7
VIP X1/VIP X2 | Quick Installation Guide 4. Connect the Serial Connector EN | 7 • If you need a serial connection to the unit connect the free to the orange socket of the unit. • Connect the configuration cable with a serial interface of the computer. Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 8
EN | 8 VIP X1/VIP X2 | Quick Installation Guide 5. Connect the Alarm Switches and the Relay Connections • Connect the alarm switches to the corresponding terminals. • Connect the relay connections to the corresponding terminals. Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 9
VIP X1/VIP X2 | Quick Installation Guide 6. Connect to the Network EN | 9 • Connect the unit to the network via the ETH socket. • Make sure that the power outlet is provided with the correct primary adapter and plug the power outlet into a suitable mains outlet. Bosch Security Systems | 2006-05 | - Bosch VIPX1A | Quick Installation Guide - Page 10
EN | 10 7. Configure the IP Address VIP X1/VIP X2 | Quick Installation Guide • Install the program Configuration Manager from the CD-ROM provided. To do so start the Setup.exe at the bottom on the right. The new IP address is valid after a reboot of the unit. Bosch Security Systems | 2006-05 | V2.0 - Bosch VIPX1A | Quick Installation Guide - Page 11
VIP X1/VIP X2 | Quick Installation Guide 8. Test the Configuration EN | 11 • Start your web computer must be set to 16 bits or 32 bits color depth, otherwise the video pictures cannot be displayed. • Use the links on top of the pages to navigate through the pages. Bosch Security Systems | 2006-05 - Bosch VIPX1A | Quick Installation Guide - Page 12
Sicherheitssyteme GmbH Robert-Koch-Straße 100 85521 Ottobrunn Germany www.bosch-sicherheitssysteme.de Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven The Netherlands www.boschsecuritysystems.com © 2006 Bosch Sicherheitssysteme GmbH Subject to change. Printed in Germany. 2501B/0506
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
VIP X1/VIP X2
– Network video server