Home » Bosch Manuals » Laundry Dryers » Bosch WTG86400UC » Manual Viewer

Bosch WTG86400UC Instructions for Use

Bosch WTG86400UC Manual

View all Bosch WTG86400UC manuals

Add to My Manuals
Save this manual to your list of manuals

Bosch WTG86400UC manual content summary:

Bosch WTG86400UC | Instructions for Use - Page 1
en-us Use and Care Manual, Installation Instructions Dryer WTG86400UC
Bosch WTG86400UC | Instructions for Use - Page 2
the superior performance and reliability. Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new dryer. Thank you for choosing Bosch. Visit our web site at www.bosch-home.com for more information and to view a selection of our products
Bosch WTG86400UC | Instructions for Use - Page 3
28 Maintenance of drain hose 28 Troubleshooting 29 Introduction 29 General Troubleshooting 29 STATEMENT OF LIMITED PRODUCT WARRANTY ... 31 Bosch Clothes Dryer 31 Additional information on products, accessories, replacement parts and services can be found at www.bosch-home.com and in the online
Bosch WTG86400UC | Instructions for Use - Page 4
to order accessories or replacement parts for your dryer. (1U )' (1U )' Customer service Your dryer does not require any special care other than the maintenance and care mentioned in this manual. If you have a problem with your dryer, please consult ~ Troubleshooting; Page 29. This may save
Bosch WTG86400UC | Instructions for Use - Page 5
installed by a specialist familiar with these requirements. Read the use and set-up instructions and all other information included with the dryer Important safety information is contained in this manual and on the warning labels located on your dryer. Standard symbols and headings are used to
Bosch WTG86400UC | Instructions for Use - Page 6
SERIOUS INJURY OR DEATH WHEN USING YOUR DRYER, FOLLOW BASIC PRECAUTIONS INCLUDING THE FOLLOWING ▯ Bosch dryers are provided with an Use and Care Manual with Installation Instructions. Read and understand all instructions before using the dryer. ▯ Do not dry articles that have been previously cleaned
Bosch WTG86400UC | Instructions for Use - Page 7
condition. Web Site Visit our web site at www.bosch-home.com for more information and to view a selection of our products. About this manual These operating and installation instructions apply to more than one model of dryer. Illustrations used may show details that differ from your particular
Bosch WTG86400UC | Instructions for Use - Page 8
results. Space allowances to fully open the door should also be considered. Do not operate the dryer at temperatures above 95°F (35°C) or below 41°F (5°C). Low temperatures affect the drying process and may prolong the drying times. The installation surface (floor) must be level and structurally
Bosch WTG86400UC | Instructions for Use - Page 9
Minimum clearances Closet: Stacked ( + ) * % & $ Label Dimension U.S. Metric Inches cm E & F - Label Dimension A Both Sides B Top C Rear D Front & $ Front of the appliance fully open. No doors or coverings. Minimum opening dimensions A 28 in. B 23.8 in. C 35.5 in. 71.1 cm 60.5 cm
Bosch WTG86400UC | Instructions for Use - Page 10
all installation instruction. ▯ Clothes dryer installation must be performed by a qualified installer, according to these instructions and according to all local codes. ▯ In addition to the installation and safety information in this manual, the local water and electric authorities (services) may
Bosch WTG86400UC | Instructions for Use - Page 11
Before installing the dryer Unpacking the appliance Parts provided with your dryer Back side of the dryer 9 CAUTION Remove the appliance packaging carefully to prevent damage to the surfaces. After removing the packaging, immediately remove any objects from the drum. Check the dryer for
Bosch WTG86400UC | Instructions for Use - Page 12
manual ▯ Warranty NOTICE: If any parts are missing please notify your dealer immediately. Accessories for your appliance Pedestal The dryer can be mounted on a special pedestal for easier loading and unloading. Pedestal item number: WMZ 20500 Stacking kits The dryer can be stacked on a Bosch washer
Bosch WTG86400UC | Instructions for Use - Page 13
box or Standpipe connection: For most plumbing box installations (with adjacent ' washer) the plastic elbow supplied with the dryer will not be used and must be removed from the dryer drain hose. 1. Fasten the dryer drain hose to the washer drain/elbow as shown in picture "A". Secure with
Bosch WTG86400UC | Instructions for Use - Page 14
installation requires a 3-wire power cord follow the installation instructions for such in the next section of this manual. ALL ELECTRICAL CONNECTIONS AND CIRCUITS 9 WARNING ELECTRIC SHOCK HAZARD ▯ Do not pull on the power cord to unplug the dryer through our Customer Service department. ▯ Use
Bosch WTG86400UC | Instructions for Use - Page 15
part Install the new power cord back through the strain relief clamp. NOTICE: Ensure the strain relief clamp has not been moved and its clamping screw(s) are outside the rear of the connection box. 9 CAUTION Use integrated electrical receptacle only for 208/ 240V Bosch washers. Leveling the dryer
Bosch WTG86400UC | Instructions for Use - Page 16
button and open the door. ▯ If the interior of the dryer feels warm, the dryer has been connected properly. Switch the dryer to Off. ▯ If the dryer does not work, switch the dryer to Off. Look in the Troubleshooting section of this user manual for hints in solving the problem. Preparing to transport
Bosch WTG86400UC | Instructions for Use - Page 17
know your appliance Control panel ( Dry Level, Time Dry, Finish in @ Program Selector Selectable Option Settings for customizing Programs ; ▯ indicator lamp blinking - options can be changed; cycle can be started; door is closed; childproof lock is active; cycle is in Pause mode. 17
Bosch WTG86400UC | Instructions for Use - Page 18
, read the IMPORTANT SAFETY INSTRUCTIONS and Operating Instructions before operating this appliance. Your new dryer # 3 + ( Control panel, display area, program selector 0 Drum with interior light (depending on model) The interior light activates after the door is opened and after the
Bosch WTG86400UC | Instructions for Use - Page 19
system. ~ Check heating system; Page 16 7. If the dryer does not work, switch the dryer to Off. Look in the Troubleshooting section of the operating instructions for support. ~ Troubleshooting; Page 29 Temporary disconnection of the dryer Operate your dryer only when you are at home. If you intend
Bosch WTG86400UC | Instructions for Use - Page 20
For optimum drying results your dryer offers several program groups and additional options. Select the required drying program from the model) are made for special type fabric loads. ~ Program selection table; Page 24 Time programs Time programs run at specific temperatures. Suitable for pre-dried
Bosch WTG86400UC | Instructions for Use - Page 21
should be cleaned after or before every drying process. Cleaning the filter reduces the drying time and saves energy. ~ Cleaning the lint filter; Page 26 2. Load the laundry into the drum and close the door. Tip: If the door has not been closed properly, the dryer will not start. Load the laundry
Bosch WTG86400UC | Instructions for Use - Page 22
remaining time will be updated. Indicator of program sequence Bosch dryers use an advanced control system with a moisture sensor continually switched off and dryer light goes out. 3. Clean lint filter. ~ Cleaning the lint filter; Page 26 4. Close the door. Tip: If at the end of the drying cycle the
Bosch WTG86400UC | Instructions for Use - Page 23
objects or non-washable parts. ▯ Always dry very small items ( dryer. Starch leaves behind a coating that reduces the drying effect. ▯ When washing laundry that is to be tumble-dried afterwards, use the correct amount of fabric softener as specified in the manufacturer's instructions. ▯ For pre-dried
Bosch WTG86400UC | Instructions for Use - Page 24
fabric Quick 40 1/3 load Multi-layered, sensitive fabrics made of acrylic fibers or separate small items of laundry also for subsequent drying Time Dry Variable 1/3 load Pre-dried, multi-layered, sensitive fabrics made of acrylic fibers or separate small items of laundry also for subsequent
Bosch WTG86400UC | Instructions for Use - Page 25
on your washer's normal spin speed. Adjusting this setting allows the dryer's displayed time to be as close as possible to the actual drying time. NOTICE: The spin speed is not the same as the rotation speed of the dryer drum. To change the dryer's Spin Speed setting follow the instructions below
Bosch WTG86400UC | Instructions for Use - Page 26
hose or pressure washer. Do not use scouring agents or all-purpose cleaners. Do not use steam cleaners. Do not use bleach-based wipes. To clean the lint filter: 1. Switch off the dryer. Rotate the program selector to Off. 9 CAUTION The inside of the door heats up during the drying process. The drum
Bosch WTG86400UC | Instructions for Use - Page 27
it. 7. Close the door. To clean the heat exchanger: 1. If the dryer is hot, run on Air Fluff/No Heat program to allow the dryer to cool down. 2. or sharp edged objects! The filter must be dried thoroughly before being placed back into dryer. Cleaning the heat exchanger The heat exchanger requires
Bosch WTG86400UC | Instructions for Use - Page 28
completely remove all of the lint and fluff. To clean the moisture sensors: 1. Open the door. 8. Remove all lint and fluff from the seals on the dryer and heat exchanger. 9. Allow the cap and the heat exchanger to dry fully. 10. First insert the heat exchanger, then the cap. 11. Turn back both
Bosch WTG86400UC | Instructions for Use - Page 29
Disconnect the dryer from the power outlet. 3. Call customer service. ~ Customer service; Page 4 General Troubleshooting Often when you encounter a problem it will be something minor. Before you call customer service, consider the suggestions and instructions below: NOTICE: The troubleshooting items
Bosch WTG86400UC | Instructions for Use - Page 30
. Check that hose is clamped on hose barb at back of the dryer securely. Program terminates Laundry is not loaded. shortly after starting. Load termination e.g. main See the problem(s) mentioned in this table. power supply failure, door open or maximum drying time reached. Initial load
Bosch WTG86400UC | Instructions for Use - Page 31
see solution of the problem(s) in this table above). Check the installation conditions. ~ Electrical Connections; Page 14 Switch off the dryer, allow it to parts. Bosch's sole liability and responsibility hereunder is to repair manufacturer-defective Product only, using a Bosch authorized service
Bosch WTG86400UC | Instructions for Use - Page 32
misuse, abuse, accidents, neglect, improper operation, failure to maintain, improper or negligent installation, tampering, failure to follow operating instructions, mishandling, unauthorized service (including self performed "fixing" or exploration of the appliance's internal workings). ▯ Adjustment
Bosch WTG86400UC | Instructions for Use - Page 33
Bosch WTG86400UC | Instructions for Use - Page 34
Bosch WTG86400UC | Instructions for Use - Page 35
Bosch WTG86400UC | Instructions for Use - Page 36
*9000991477* 9000991477 9503 1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904 www.bosch-home.com • © 2012 BSH Home Appliances

Section	Page
en-us Use and Care Manual, Installation Instructions	1
Dryer	1
Table of contentsen-us Use and Care Manual, Installation Instructions	3
Important information	4
Purchase information	4
Customer service	4
1. Contact your installer or the Authorized Service Provider in your area and explain to them why you are not satisfied. This will usually correct the problem.	4
2. If after working with your installer or service technician the problem still has not been resolved to your satisfaction, please let us know either by writing to us at:	4
Your dryer is intended for	5
Importance and meaning of symbols	5
9 WARNING	5
9 CAUTION	5
NOTICE:	5
Tip:	5
IMPORTANT SAFETY INSTRUCTIONS	6
READ AND SAVE THESE INSTRUCTIONS	6
WARNING	6
WARNING	6
▯ Bosch dryers are provided with an Use and Care Manual with Installation Instructions. Read and understand all instructions before using the dryer.	6
▯ Do not dry articles that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, other flammable or explosive substances as they give off vapors that could ignite or explode.	6
▯ Before the appliance is removed from service or discarded, remove the door (to the drying compartment) to prevent children from playing or hiding inside. Also remove the power cord/plug.	6
▯ Do not allow anyone to climb, lean or hang on any part of the dryer including any protruding components such as the appliance door or a pullout shelf.	6
▯ Do not reach into the appliance if the drum is moving.	6
▯ Do not tamper with the controls.	6
▯ Do not repair or replace any part of the appliance or attempt any service unless specifically recommended in the user maintenance instructions or in published user-repair instructions that you understand and have the skills to carry out.	6
▯ Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer or the fabric softener or product.	6
▯ Always unplug the dryer from the power supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.	6
▯ To reduce the risk of fire, clothes, cleaning rags, mop heads and the like which have traces of any flammable substance, such as vegetable oil, cooking oil, petroleum based oils or distillates, waxes, fats, etc., must not be placed in the dryer. ...	6
▯ Do not place items exposed to cooking oils in your dryer. Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.	6
▯ Do not use heat to dry articles containing foam rubber (may be labeled latex foam) or similarly textured rubber-like materials or equivalent. Foam rubber materials can ignite by spontaneous combustion.	6
▯ Keep flammable materials and vapors, such as gasoline, away from the dryer.	6
▯ Clean lint filter before or after each load.	6
▯ Do not install or store this appliance where it will be exposed to the weather. Hoses and internal parts may be damaged if exposed to freezing temperatures.	6
▯ Do not use the dryer if it has a worn power cord or loose plug.	6
▯ The dryer must only be used for its intended purpose.	6
▯ Always follow the fabric care instructions recommended by the clothing manufacturer.	6
▯ Do not operate the dryer if parts are missing or broken.	6
▯ Do not sit on top of the dryer.	6
▯ To reduce the risk of fire or electrical shock, DO NOT use an extension cord or an adapter to connect the dryer to the electrical power supply.	6
▯ Use the integrated socket only for listed appliances.	6
▯ Always check pockets and remove any objects. Cigarette lighters are particularly hazardous.	6
▯ Do not operate the dryer if any guards and/or panels have been removed.	6
▯ Do not bypass any safety devices.	6
▯ Do not operate this dryer until you are sure that:	6
▯ Failure to install, maintain and/or operate the dryer according to the manufacturer’s instructions may result in injury and/or damage.	6
▯ To avoid floor damage and mold growth, do not let spills or splashout cause standing water around or under the appliance.	6
▯ See the Installation Instructions section in this manual for grounding requirements. ~ Electrical Connections; Page 14	6
▯ The IMPORTANT S AFEGUARDS and WARNINGS presented in this manual do not cover all possible conditions that may occur. Common sense, caution and care must be exercised when installing, maintaining or operating the dryer.	6
▯ Always contact your dealer, distributor, service agent or the manufacturer about any problems or conditions that you do not understand.	6
▯ Follow the Safety Information in the INSTALLATION INSTRUCTIONS and the OPERATING INSTRUCTIONS.	6
WARNING	7
▯ Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.	7
▯ Make sure to utilize all child lock/safety features of your appliance, and be sure to turn the appliance Off when not in use.	7
▯ Appliances are not intended for use by children, however when children become old enough to operate the appliance, it is the responsibility of the parents or legal guardians to ensure they are instructed in safe practices by qualified persons.	7
▯ Keep all laundry aids (including detergents, bleach, fabric softeners, etc.) out of the reach of children.	7
WARNING	7
Introduction to your new dryer	7
9 WARNING	7
risk of fire, electric shock or injury	7
Standard features and helpful information	7
Special features	7
Environmentally friendly use of your dryer	7
Dimensions and clearances required	8
Installation for best performance	8
9 CAUTION	8
do not install the dryer:	8
Appliance dimensions	8
Length of power cord and drain hose	8
Minimum clearances	9
Installation Instructions	10
Introduction	10
9 WARNING	10
Risk of fire, electric shock or injury to persons	10
9 CAUTION	10
Before installing the dryer	11
9 CAUTION	11
Waste disposal	11
9 WARNING	11
Warnings for children	11
9 WARNING	11
To avoid risk of injury or death, do the following	11
Parts provided with your dryer	11
NOTICE:	12
Accessories for your appliance	12
Installation - step by step	12
1. Unpack the dryer.	12
2. Remove all objects from the dryer drum.	12
3. Check the dryer for visible damage.	12
4. Position the dryer near the installation location.	12
5. Disconnect the power cord and drain hose from their clips on the back of the dryer.	12
9 CAUTION	12
NOTICE:	12
6. Connect the outlet end of the drain hose to a standpipe or other drain inlet. Examples are shown below.	12
9 CAUTION	12
appliance damage could occur if drain water flows back into the appliance	12
1. Fasten the dryer drain hose to the washer drain/elbow as shown in picture “A”. Secure with plastic ties supplied.	13
9 CAUTION	13
2. Place drain hose assembly into standpipe as shown in picture “B”.	13
NOTICE:	13
NOTICES	13
Electrical Connections	14
NOTICE:	14
9 WARNING	14
electric shock HAZARD	14
9 WARNING	14
Electric Shock Hazard	14
To reduce the risk of electrical shock:	14
9 WARNING	14
Electric shock HAZARD	14
9 WARNING	14
Electric shock hazard	14
9 WARNING	14
Electric shock hazard	14
1. Unplug the current power cord being used from the outlet/receptacle.	15
2. To disconnect and/or reconnect a new power cord you must remove the top cover of the appliance as shown below.	15
A. Remove the two T20 torx head screws.	15
B. Push the top cover toward the rear of the appliance and lift up.	15
3. Open the connection box toward the rear of the appliance by removing the T20 torx head screw fastening the cover.	15
4. Remove the 4-wire power cord (as supplied):	15
A. Remove the 3 Philips screws (2 labeled L and one labeled N).	15
B. Remove the green grounding screw PE (T20 torx).	15
NOTICE:	15
5. Loosen the strain relief clamp screw (Philips head) on rear of the connection box.	15
6. Pull the old power cord out of the connection box.	15
7. Install the new power cord back through the strain relief clamp.	15
NOTICE:	15
8. Ensure the terminal ends are long enough and are formed (bent) so that no part of them (wires or terminal ends) come in contact with connection box enclosure.	15
NOTICE:	15
9. Ensure the terminal ends are long enough and are formed (bent) so they will align with the terminal block fastening locations (screw holes).	15
10. Reinstall the 2 terminal block screws (Philips head) at locations L as shown below.	15
11. If the ground wire shown below from N to PE is not part of the 3-wire cord assembly you have it must be obtained/purchased separately and it must be installed.	15
12. Install the last terminal block screw (Philips) and 1 grounding screw (T20 torx) at locations N and PE.	15
13. Tighten the strain relief screw ensuring the power cord cannot be pulled out of the connection box but not so tight as cut the power cord insulation.	15
14. Reinstall the connection box cover making sure all wires are routed so they do not touch any part of the enclosure and are secure.	15
15. Reinstall the appliance top cover as previously described in “2” above.	15
9 CAUTION	15
9 CAUTION	15
Leveling the dryer	15
1. Install the dryer on a level and solid surface, preferably in a corner of a room.	16
2. If the floor is uneven (or not level) adjust the dryer feet as required to level the dryer. Do not place anything under the dryer feet to help level the dryer.	16
3. Extend the dryer feet no more than is necessary. The more the feet are extended, the more vibration the dryer will experience. Start with the dryer feet turned all the way in and adjust each foot as necessary.	16
4. Use a bubble level to check the top of the dryer to make sure it is level side to side and front to rear.	16
5. Press down on each corner of the dryer top to make sure the dryer does not “wobble“. There should be no \	16
Check heating system	16
1. Check that the drum is empty.	16
2. Close the dryer door.	16
3. Switch the dryer to Cotton Extra Dry and then touch the Start/Pause button.	16
4. After 2-3 minutes touch the Start/Pause button and open the door.	16
Preparing to transport the dryer - step by step	16
1. Rotate the program selector to Off.	16
2. Pull out power supply plug.	16
3. Place any accessories in the drum.	16
4. Close the door and secure with adhesive tape.	16
5. Screw the height-adjustable feet of the dryer into the housing to prevent them from being damaged during transportation.	16
Getting to know your appliance	17
Control panel	17
Operating Instructions	18
9 WARNING	18
risk of fire, electric shock, or injury	18
Your new dryer	18
9 WARNING	19
before installing or using your dryer	19
Before using the dryer for the first time	19
1. Read these operating instructions carefully.	19
2. Check that the supply voltage corresponds with the voltage specifications on the rating plate on the dryer, see top rear side of the dryer and/or rating plate label inside of the dryer door. ~ Electrical Connections; Page 14	19
3. Remove all objects from the drum.	19
4. Check the dryer for visible damage. If damage found contact your dealer.	19
5. Wipe the inside of the drum with a damp cloth.	19
6. Check heating system. ~ Check heating system; Page 16	19
7. If the dryer does not work, switch the dryer to Off. Look in the Troubleshooting section of the operating instructions for support. ~ Troubleshooting; Page 29	19
Temporary disconnection of the dryer	19
1. Turn off the circuit breaker.	19
2. Pull out the power supply plug if possible.	19
3. Clean the lint filter.	19
Using the program selector to choose a drying cycle	20
NOTICE:	20
Program selection	20
Selecting program settings and additional options	20
Loading the laundry	21
9 WARNING	21
risk of explosion	21
1. Check lint filter.	21
2. Load the laundry into the drum and close the door.	21
Tip:	21
Tips	21
Starting the program	21
1. Rotate program selector to the desired program. Select the program which corresponds to the laundry in the dryer from Program selection table. ~ Program selection table; Page 24	21
2. Touch the Start/Pause button. Indicator lamp lights up and the cycle starts.	21
NOTICES	21
3. If required, select Low Heat by pressing the button. ~ Additional Program Option settings; Page 25	22
4. If required, select Wrinkle Block by pressing the button. ~ Additional Program Option settings; Page 25	22
Tip:	22
Indicator of program sequence	22
Childproof lock	22
NOTICE:	22
Selecting a different program	22
1. Touch Start/Pause.	22
2. Select another program.	22
3. Touch Start/Pause. The new drying cycle starts from the beginning.	22
Cancel program	22
1. Touch Start/Pause.	22
2. Rotate the program selector to Off.	22
Program end	22
Removing laundry/switching the appliance off	22
1. Open the door and remove the laundry.	22
2. Turn the program selector to the Off position. Appliance is switched off and dryer light goes out.	22
3. Clean lint filter. ~ Cleaning the lint filter; Page 26	22
4. Close the door.	22
Tip:	22
Signal	22
Activate adjustment mode	22
1. Select Cotton Extra Dry on position 1.	23
2. Hold down Start/Pause and turn the program selector to the right (position 3). Release Start/Pause button.	23
Laundry	23
Preparing the laundry	23
NOTICE:	23
Sorting the laundry	23
Drying tips	23
Program selection table	24
Tip:	24
Default Program and Option settings	25
Dry Level	25
Time Dry	25
Finish in	25
NOTICE:	25
Additional Program Option settings	25
Wrinkle Block	25
Low Heat	25
Spin speed	25
NOTICE:	25
Activate adjustment mode	25
1. Select Cotton Extra Dry on position 1.	25
2. Touch and hold Start/Pause and turn the program selector to the right (position 2). Release Start/Pause button.	25
Cleaning and care	26
9 WARNING	26
Risk of eXPlosion	26
9 CAUTION	26
Cleaning the housing and control panel	26
NOTICE:	26
Cleaning the lint filter	26
Tip:	26
1. Switch off the dryer. Rotate the program selector to Off.	26
9 CAUTION	26
2. Open the door.	26
3. Pull out filter.	26
4. Open the filter.	26
5. Remove fluff (run hand over filter).	27
6. Close the filter and re-insert it.	27
7. Close the door.	27
NOTICE:	27
Cleaning the heat exchanger	27
1. If the dryer is hot, run on Air Fluff/No Heat program to allow the dryer to cool down.	27
2. Residual water may escape, place an absorbent cloth under the maintenance flap.	27
3. Unlock the maintenance flap and open it completely.	27
4. Turn both locking levers towards each other.	27
5. Pull out the heat exchanger cap.	27
6. Remove the heat exchanger.	27
NOTICE:	27
7. Rinse the heat exchanger and the cap on all sides with a jet of water to completely remove all of the lint and fluff.	28
8. Remove all lint and fluff from the seals on the dryer and heat exchanger.	28
9. Allow the cap and the heat exchanger to dry fully.	28
10. First insert the heat exchanger, then the cap.	28
11. Turn back both locking levers.	28
12. Close the maintanance flap until it locks into position.	28
13. Look in the Troubleshooting table to reset the maintenance indication. ~ Troubleshooting; Page 29	28
Cleaning the moisture sensors	28
1. Open the door.	28
2. The deposit on the sensors can easily be removed by wiping the sensors (the two bars next to the lint filter) with a cloth and a little white vinegar.	28
NOTICE:	28
Cleaning the lint filter area	28
Maintenance of drain hose	28
NOTICE:	28
Troubleshooting	29
Introduction	29
NOTICE:	29
9 WARNING	29
Risk of injury to skin	29
9 WARNING	29
Risk of electric shock! explosion hazard	29
1. Set program selector to Off.	29
2. Disconnect the dryer from the power outlet.	29
3. Call customer service. ~ Customer service; Page 4	29
General Troubleshooting	29
NOTICE:	29
STATEMENT OF LIMITED PRODUCT WARRANTY	31

Match case Limit results 1 per page

en-us

Use and Care Manual, Installation Instructions

Dryer

WTG86400UC