Home » Bosch Manuals » Laundry Dryers » Bosch WTG86403UC » Manual Viewer

Bosch WTG86403UC Use and Care Manual

Bosch WTG86403UC Manual

View all Bosch WTG86403UC manuals

Add to My Manuals
Save this manual to your list of manuals

Bosch WTG86403UC manual content summary:

Bosch WTG86403UC | Use and Care Manual - Page 1
en-us Use and Care Manual, Installation Instructions Dryer WTG86403UC
Bosch WTG86403UC | Use and Care Manual - Page 2
dryer for your laundry needs. We are confident you will enjoy the superior performance and reliability. Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new dryer. Thank you for choosing Bosch. Visit our website at www.boschhome.com
Bosch WTG86403UC | Use and Care Manual - Page 3
Control panel 19 Display area 20 OPERATING INSTRUCTIONS 21 Your new dryer 21 Before Troubleshooting 34 Introduction 34 General Troubleshooting 34 STATEMENT OF LIMITED PRODUCT WARRANTY .. 37 Bosch Clothes Dryer 37 Additional information on products, accessories, replacement parts and services
Bosch WTG86403UC | Use and Care Manual - Page 4
the maintenance and care mentioned in this manual. If you have a problem with your dryer, please consult the Troubleshooting section of this manual. ~ Troubleshooting; Page 34 If problems persist and service is necessary, please contact our customer service department. Do not attempt to repair the
Bosch WTG86403UC | Use and Care Manual - Page 5
. Before using the appliance, read the use and installation instructions and all other information included with the appliance and act . Safety Definitions Important SafetyDintso safety information is contained in this manual and on the warning labels located on your dryer. Standard symbols
Bosch WTG86403UC | Use and Care Manual - Page 6
are provided with a Use and Care Manual with Installation Instructions. Read and understand all instructions before using the dryer. ▯ Do service provider or the manufacturer about any problems or conditions that you do not understand. ▯ Follow the Safety Information in the INSTALLATION INSTRUCTIONS
Bosch WTG86403UC | Use and Care Manual - Page 7
following label as required by California: 67$7(2)&$/,)251,$352326,7,21:$51,1* :$51,1* &DQFHUDQG5HSURGXFWLYH+DUPZZZ3:DUQLQJVFDJRY SAVE THESE INSTRUCTIONS! Keep these instructions for future reference and in case of change of ownership, manual should be conveyed with the dryer. 7
Bosch WTG86403UC | Use and Care Manual - Page 8
appliance needs. Please read and follow the use and care, important safety instructions and troubleshooting information contained in this manual. Please retain this manual for future reference. ~ Troubleshooting; Page 34 This dryer complies with UL 2158 Electric Clothes Dryers. Standard features
Bosch WTG86403UC | Use and Care Manual - Page 9
Dimensions and clearances required Installation for best performance Dimensoadclernsquired Appliance dimensions 9 CAUTION DO NOT INSTALL THE DRYER: ▯ outdoors, ▯ in an environment with dripping water, ▯ near flammable materials, ▯ in rooms which are at risk of freezing, ▯ in rooms which may
Bosch WTG86403UC | Use and Care Manual - Page 10
be stacked on top of a Bosch Washer of the same dimensions to save space. 9 CAUTION ▯ Use only the dryer stacking kit noted in this User Manual's Accessories section. ▯ Do not stack washer on top of dryer. ▯ Do not stack washer on top of another washer. ▯ Ensure washer transportation bolts have been
Bosch WTG86403UC | Use and Care Manual - Page 11
Under counter (Preferred) Under counter (Less Desirable) $ & % Front of the appliance fully open. No doors or coverings. Minimum opening dimensions A 28 in. B 23.8 in. C 34.5 in. 71.1 cm 60.5 cm 87.6 cm ( + * ) If front of the appliance is covered ventilation openings must be
Bosch WTG86403UC | Use and Care Manual - Page 12
must be performed by a qualified installer, according to these instructions and according to all local codes. ▯ In addition to the installation and safety information in this manual, the local water and electric authorities (services) may have special requirements that must be followed. ▯ Install
Bosch WTG86403UC | Use and Care Manual - Page 13
using the dryer. Parts provided with your dryer Back side of the dryer @ User Manual and Product Registration H Power Adapter: ▯ Supplied Power Adapter ▯ 2 spare fuses ▯ Instruction sheet P Drain Set Pack: ▯ (2) plastic ties for securing drain hose ▯ Plastic elbow ▯ Plastic connector
Bosch WTG86403UC | Use and Care Manual - Page 14
, for easier loading and unloading (see washing machine user manual for unique pedestal model number for the washer). Pedestal item replacement is needed. Accessories can be purchased from Customer Service or your local dealer. ~ Customer service; Page 4 (QVXUHWKHGUDLQKRVH UHPDLQVFRQQHFWHG
Bosch WTG86403UC | Use and Care Manual - Page 15
Examples of connections: ▯ Plumbing box or Standpipe connection: For most plumbing box installations (with adjacent washer) the plastic elbow supplied with the dryer will not be used and must be removed from the dryer drain hose. 1. Fasten the dryer drain hose to the washer drain/elbow as shown in
Bosch WTG86403UC | Use and Care Manual - Page 16
NOTICES ▯ Examples shown are for reference only. Not all fittings, connectors, nuts, brackets, ties, etc. are supplied to accommodate every application. ▯ Ensure there are no kinks or crimps along the entire length of hose. 2. Use an existing individual 240V, 15A minimum branch circuit having a
Bosch WTG86403UC | Use and Care Manual - Page 17
only manufacturer recommended replacement power cords purchased through our Customer Service department. ▯ Do not use NEMA 14-30P (4-prong) this symbol can assure compliance with all current regulations. SAVE THESE INSTRUCTIONS! 9 WARNING ELECTRIC SHOCK HAZARD To reduce the risk of electrical shock
Bosch WTG86403UC | Use and Care Manual - Page 18
properly. Switch the dryer to Off. ▯ If the dryer does not work, switch the dryer to Off. Look in the Troubleshooting section of this user manual for hints in solving the problem. Preparing to transport the dryer - step by step 1. Rotate the program selector to Off. 2. Pull out power supply plug
Bosch WTG86403UC | Use and Care Manual - Page 19
Getting to know your appliance Control panel Getignowkyuraplince ( Dry Level, Time Dry, Finish in @ Program Selector Selectable Option Settings for customizing Programs as desired. Indicator Symbol lights or desired time is displayed if setting is active.~ Default Program and Option
Bosch WTG86403UC | Use and Care Manual - Page 20
Display area ( Drying cycle status sequence 0 Childproof lock indicator 8 Cleaning required indicator @ 4 Digit Display: ▯ Finish in time adjustable in 1h (h=hour) steps to 24h ▯ program duration 2:30 H Time Dry ñ and Finish in 0 indicators P Indicator lamps for additional
Bosch WTG86403UC | Use and Care Manual - Page 21
SHOCK, OR INJURY To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS and OPERATING INSTRUCTIONS before operating this appliance. Your new dryer # 3 + ( Control panel, display area, program selector 0 Drum with interior light (depending on
Bosch WTG86403UC | Use and Care Manual - Page 22
instructions. Check the machine. Never connect the utilities (power or water) to or start a damaged machine! Contact Customer Service! ~ Customer service to Off. Look in the Troubleshooting section of the operating instructions for support. ~ Troubleshooting; Page 34 Temporary disconnection of the
Bosch WTG86403UC | Use and Care Manual - Page 23
Program selection For optimum drying results your dryer offers several different types of programs to choose from. Select the required drying program from the program table according to the examples.~ Program selection table; Page 28 Automatic programs There are automatic programs for different
Bosch WTG86403UC | Use and Care Manual - Page 24
no foreign objects are in the drum. Recommended Load Size Recommended maximum load size can be found in the program selection table in this manual. ~ Program selection table; Page 28 During the cycle, the display area indicates the estimated remaining time and symbols showing the cycle progress are
Bosch WTG86403UC | Use and Care Manual - Page 25
3. If required, select Low Heat by pressing the button. ~ Additional Program Option settings; Page 29 4. If required, select Wrinkle Block by pressing the button. ~ Additional Program Option settings; Page 29 Tip: The estimated remaining time will be updated. Indicator of program sequence Bosch
Bosch WTG86403UC | Use and Care Manual - Page 26
Signal For switching the buzzer on and off touch the Signal button. The buzzer indicates program end if it is activated. Other alarms are not influenced by this option. You can also change the following settings: ▯ volume for buzzer ▯ volume for button signals To change these settings always
Bosch WTG86403UC | Use and Care Manual - Page 27
the drying results. ▯ When washing laundry to be tumble-dried, use the correct amount of detergent and textile care products as specified in the manufacturer's instructions. ▯ Clean the moisture sensor regularly. ~ Cleaning the moisture sensors; Page 33 27
Bosch WTG86403UC | Use and Care Manual - Page 28
Program selection table Progamselctinoable Programs Max. Type of laundry load up to: Standard programs Cotton Dry full load Normal cotton and linen type load (bed linen, cotton clothes, etc.) Cotton Extra Dry full load Terry bathrobes and terry bed linen (particularly thick or multi-ply)
Bosch WTG86403UC | Use and Care Manual - Page 29
: The spin speed is not the same as the rotation speed of the dryer drum. To change the dryer's Spin Speed setting follow the instructions below. Activate adjustment mode 2II 1. Select Cotton Extra Dry on position 1. The appliance is on. 2. Touch and hold Start/Pause and turn the program
Bosch WTG86403UC | Use and Care Manual - Page 30
is designed to give you years of service. Observe the following instructions to maintain your appliance and keep it in bleach-based wipes. Cleaning the lint filter area 9 WARNING FIRE HAZARD Follow these instructions when cleaning the lint filter area. ▯ DO NOT extend any cleaning device or object
Bosch WTG86403UC | Use and Care Manual - Page 31
2. Open the door. 3. Pull out filter. 5. Remove lint (run hand over filter). NOTICE: Severely dirty or clogged lint filter should be rinsed under warm running water. Remove the lint from the lint filter opening and area below. Ensure that no lint falls into opening below. 4. Open the filter. The
Bosch WTG86403UC | Use and Care Manual - Page 32
. 12. Close the maintenance flap until it locks into position. 5. Pull out the Condenser cap. 13. Look in the Troubleshooting table to reset the maintenance indication. ~ Troubleshooting; Page 34 6. Remove the Condenser. NOTICE: Do not damage the Condenser! Clean with warm water only. Do not use
Bosch WTG86403UC | Use and Care Manual - Page 33
the drain hose for kinks, restrictions or blockage. NOTICE: If DR indicator still lights up after the above steps are taken, you should contact Customer Service. 33
Bosch WTG86403UC | Use and Care Manual - Page 34
the power outlet. 3. Call Customer Service. ~ Customer service; Page 4 General Troubleshooting Often when you encounter a problem it will be something minor. Before you call Customer Service, consider the suggestions and instructions below: NOTICE: The troubleshooting items listed below can help
Bosch WTG86403UC | Use and Care Manual - Page 35
Determing the Problem Problem Dryer does not start. Start/Pause indicator light does not flash. The display panel and indicator lights go out, Start/Pause indicator light flashes. The
Bosch WTG86403UC | Use and Care Manual - Page 36
Clean lint filter or/and Condenser (see solution of the lights are flashing. problem(s) in this table above). Installation conditions are not ade- Check the installation the laundry may be hot. If troubleshooting did not solve your issue contact Customer Service ~ Customer service; Page 4 36
Bosch WTG86403UC | Use and Care Manual - Page 37
any liability, or have responsibility, for the Product if it is located in a remote area (more than 100 miles from an authorized service provider) or is in a reasonably inaccessible, hazardous, threatening, or treacherous locale, surroundings, or environment; in any such event, if you request, Bosch
Bosch WTG86403UC | Use and Care Manual - Page 38
installation, tampering, failure to follow operating instructions, mishandling, unauthorized service (including self performed "fixing" or where there is nothing wrong with the Product; correction of installation problems (you are solely responsible for any structure and setting for the Product
Bosch WTG86403UC | Use and Care Manual - Page 39
Bosch WTG86403UC | Use and Care Manual - Page 40
*9001511678* 9001511678 0009 1901 Main Street, Suite 600 • Irvine, CA 92614 • 1-800-944-2904 www.bosch-home.com • © 2020 BSH Home Appliances Corporation

Section	Page
en-us Use and Care Manual, Installation Instructions	1
Dryer	1
Welcome to Your New Dryer!	2
Congratulations on your selection of a new Bosch dryer for your laundry needs. We are confident you will enjoy the superior performance and reliability.	2
Please do not hesitate to contact our Customer Service department if you have any questions or comments about your new dryer.	2
Thank you for choosing Bosch.	2
Visit our website at www.bosch- home.com/us (USA) or www.bosch- home.ca (Canada) for more information and to view a selection of our products.	2
Table of contentsen-us Use and Care Manual, Installation Instructions	3
Important information	4
Important information	4
Purchase information	4
Customer service	4
Your dryer is intended for	5
Your dryer is intended for	5
Safety Definitions	5
Safety Definitions	5
9 WARNING	5
9 CAUTION	5
NOTICE:	5
Tip:	5
IMPORTANT SAFETY INSTRUCTIONS	6
IMPORTANT SAFETY INSTRUCTIONS	6
READ AND SAVE THESE INSTRUCTIONS	6
WARNING	6
WARNING	6
WARNING	7
WARNING	7
Introduction to your new dryer	8
Introduction to your new dryer	8
9 WARNING	8
Risk of fire, electric shock or injury	8
Standard features and helpful information	8
Special features	8
Environmentally friendly use of your dryer	8
NOTICE:	8
Dimensions and clearances required	9
Dimensions and clearances required	9
Installation for best performance	9
9 CAUTION	9
Do not install the dryer:	9
NOTICE:	9
Appliance dimensions	9
Length of power cord and drain hose	9
Minimum clearances	10
9 CAUTION	10
NOTICE:	10
INSTALLATION INSTRUCTIONS	12
Installation Instructions	12
Introduction	12
9 WARNING	12
Risk of fire, electric shock or injury to persons	12
9 CAUTION	12
Before installing the dryer	12
9 CAUTION	12
Waste disposal	13
9 WARNING	13
Warnings for children	13
9 WARNING	13
To avoid risk of injury or death, do the following	13
Parts provided with your dryer	13
9 WARNING	14
RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS	14
Tip:	14
Accessories for your appliance	14
Tip:	14
Installation - step by step and check list	14
1. Unpack the dryer.	14
2. Remove all objects from the dryer drum.	14
3. Check the dryer for visible damage.	14
4. Position the dryer near the installation location.	14
5. Disconnect the power cord and drain hose from their clips on the back of the dryer.	14
9 CAUTION	14
NOTICE:	14
6. Connect the outlet end of the drain hose to a standpipe or other drain inlet. Examples are shown below.	14
9 CAUTION	14
Appliance damage could occur if drain water flows back into the appliance	14
1. Fasten the dryer drain hose to the washer drain/elbow as shown in picture “A”. Secure with plastic ties supplied.	15
9 CAUTION	15
2. Place drain hose assembly into standpipe as shown in picture “B”.	15
NOTICE:	15
NOTICES	16
Electrical Connections	16
NOTICES	16
1. If the home has an existing 4-prong, 30A Dryer receptacle use the supplied Power Adapter.	16
NOTICE:	16
2. Use an existing individual 240V, 15A minimum branch circuit having a NEMA 6-15R outlet (or choose to have one installed).	16
9 WARNING	16
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK.	16
9 WARNING	17
Electric shock hazard	17
9 WARNING	17
Electric shock hazard	17
To reduce the risk of electrical shock:	17
9 WARNING	17
Electric shock hazard	17
9 WARNING	17
Electric shock hazard	17
Leveling the dryer	18
1. Install the dryer on a level and solid surface, preferably in a corner of a room.	18
2. If the floor is uneven (or not level) adjust the dryer feet as required to level the dryer. Do not place anything under the dryer feet to help level the dryer.	18
3. Extend the dryer feet no more than is necessary. The more the feet are extended, the more vibration the dryer will experience. Start with the dryer feet turned all the way in and adjust each foot as necessary.	18
4. Use a bubble level to check the top of the dryer to make sure it is level side to side and front to rear.	18
5. Press down on each corner of the dryer top to make sure the dryer does not “wobble“. There should be no \	18
Check heating system	18
1. Check that the drum is empty.	18
2. Close the dryer door.	18
3. Switch the dryer to Timed Dry Variable program and then touch the Start/Pause button.	18
4. After 5-6 minutes touch the Start/Pause button and open the door.	18
Preparing to transport the dryer - step by step	18
1. Rotate the program selector to Off.	18
2. Pull out power supply plug.	18
3. Place any accessories in the drum.	18
4. Close the door and secure with adhesive tape.	18
5. Screw the height-adjustable feet of the dryer into the housing to prevent them from being damaged during transportation.	18
Getting to know your appliance	19
Getting to know your appliance	19
Control panel	19
Display area	20
OPERATING INSTRUCTIONS	21
Operating Instructions	21
9 WARNING	21
Risk of fire, electric shock, or injury	21
Your new dryer	21
9 WARNING	22
before using your dryer	22
Before using the dryer for the first time	22
1. Read these operating instructions carefully.	22
2. Check that the supply voltage corresponds with the voltage specifications on the rating plate on the dryer, see top rear side of the dryer and/or rating plate label inside the dryer door. ~ Electrical Connections; Page 16	22
3. Remove all objects from the drum.	22
4. Check the dryer for visible damage. If damage found contact your dealer.	22
5. Wipe the inside of the drum with a damp cloth.	22
6. Check heating system. ~ Check heating system; Page 18	22
7. If the dryer does not work, switch the dryer to Off. Look in the Troubleshooting section of the operating instructions for support. ~ Troubleshooting; Page 34	22
Temporary disconnection of the dryer	22
1. Turn off the circuit breaker.	22
2. Pull out the power supply plug if possible.	22
3. Clean the lint filter.	22
Using program selector to choose a drying cycle	22
NOTICE:	22
Program selection	23
Selecting program settings and additional options	23
Loading the laundry	24
9 WARNING	24
risk of explosion	24
1. Check lint filter.	24
2. Load the laundry into the drum and close the door.	24
Tip:	24
Tips	24
Starting the program	24
1. Rotate program selector to the desired program. Select the program which corresponds to the laundry in the dryer from Program selection table. ~ Program selection table; Page 28	24
2. Touch the Start/Pause button. Indicator lamp lights up and the cycle starts.	24
NOTICES	24
3. If required, select Low Heat by pressing the button. ~ Additional Program Option settings; Page 29	25
4. If required, select Wrinkle Block by pressing the button. ~ Additional Program Option settings; Page 29	25
Tip:	25
Indicator of program sequence	25
Childproof lock	25
NOTICE:	25
Selecting a different program	25
1. Touch Start/Pause.	25
2. Select another program.	25
3. Touch Start/Pause. The new drying cycle starts from the beginning.	25
Cancel program	25
1. Touch Start/Pause.	25
2. Rotate the program selector to Off.	25
Program end	25
Removing laundry/switching the appliance off	25
1. Open the door and remove the laundry.	25
2. Turn the program selector to the Off position. Appliance is switched off and dryer light goes out.	25
3. Clean lint filter. ~ Cleaning the lint filter; Page 30	25
4. Close the door.	25
Tip:	25
Signal	26
Activate adjustment mode	26
1. Select Cotton Extra Dry on position 1.	26
2. Hold down Start/Pause and turn the program selector to the right (position 3). Release Start/Pause button.	26
Laundry	27
Laundry	27
Preparing the laundry	27
NOTICE:	27
Sorting the laundry	27
Drying tips	27
Program selection table	28
Program selection table	28
Tip:	28
Default Program and Option settings	29
Dry Level	29
NOTICE:	29
Time Dry	29
Finish in	29
NOTICE:	29
Additional Program Option settings	29
Wrinkle Block	29
Low Heat	29
Spin speed	29
NOTICE:	29
Activate adjustment mode	29
1. Select Cotton Extra Dry on position 1.	29
2. Touch and hold Start/Pause and turn the program selector to the right (position 2). Release Start/Pause button.	29
USER-MAINTENANCE INSTRUCTIONS	30
User-maintenance instructions	30
9 WARNING	30
Risk of explosion	30
9 CAUTION	30
Cleaning the Dryer's exterior	30
NOTICE:	30
Cleaning the lint filter area	30
9 WARNING	30
FIRE HAZARD	30
Follow these instructions when cleaning the lint filter area.	30
Cleaning the lint filter	30
Tip:	30
1. Turn the Program Selector to switch off the appliance.	30
9 CAUTION	30
2. Open the door.	31
3. Pull out filter.	31
4. Open the filter.	31
5. Remove lint (run hand over filter).	31
NOTICE:	31
6. Close the filter and re-insert it.	31
7. Close the door.	31
Cleaning the Condenser	32
1. If the dryer is hot, run on Air Fluff/No Heat program to allow the dryer to cool down.	32
2. Residual water may escape, place an absorbent cloth under the maintenance flap.	32
3. Unlock the maintenance flap and open it completely.	32
4. Turn both locking levers towards each other.	32
5. Pull out the Condenser cap.	32
6. Remove the Condenser.	32
NOTICE:	32
7. Rinse the Condenser and the cap on all sides with a jet of water to completely remove all of the lint and fluff.	32
8. Remove all lint and fluff from the seals on the dryer and Condenser.	32
9. Allow the cap and the Condenser to dry fully.	32
10. First insert the Condenser, then the cap.	32
11. Turn back both locking levers.	32
12. Close the maintenance flap until it locks into position.	32
13. Look in the Troubleshooting table to reset the maintenance indication. ~ Troubleshooting; Page 34	32
Cleaning the moisture sensors	33
1. Open the door.	33
2. The deposit on the sensors can easily be removed by wiping the sensors (the two bars next to the lint filter) with a cloth and white vinegar.	33
NOTICE:	33
Maintenance of drain hose	33
NOTICE:	33
Replacing fuses in the Power Adapter - step-by-step	33
1. Unplug the Washer and Dryer cords from the Power Adapter.	33
2. Remove fuse holder using a pointed tool as shown (e.g. pick or small screwdriver).	33
3. Replace suspected bad fuse with a known good one.	33
NOTICE:	33
4. Reinstall the fuse and fuse holder in the Power Adapter ensuring it snaps into place.	33
Troubleshooting	34
Troubleshooting	34
Introduction	34
NOTICE:	34
9 WARNING	34
Risk of injury to skin	34
9 WARNING	34
Risk of electric shock! explosion hazard	34
1. Set program selector to Off.	34
2. Disconnect the dryer from the power outlet.	34
3. Call Customer Service. ~ Customer service; Page 4	34
General Troubleshooting	34
NOTICE:	34
If troubleshooting did not solve your issue contact Customer Service ~ Customer service; Page 4	36
STATEMENT OF LIMITED PRODUCT WARRANTY	37
STATEMENT OF LIMITED PRODUCT WARRANTY	37

Match case Limit results 1 per page

en-us

Use and Care Manual, Installation Instructions

Dryer

WTG86403UC