Boss Audio ATV30BRGB User Manual

FCC

COMPLIANCE STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause

undesired operation of this device.

This transmitter must not be co-located or operated in conjunction with any other

antenna or transmitter. The Bluetooth antenna cannot be removed (or replaced) by

user. This equipment complies with FCC/ IC radiation exposure limits set forth for

an uncontrolled environment and meets the FCC radio frequency (RF) Exposure

Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This

equipment has very low levels of RF energy that it deemed to comply without

maximum permissive exposure evaluation (MPE). But it is desirable that it should

be installed and operated keeping the radiator at least 20 cm or more away from

person’s body (excluding extremities: hands, wrists, feet and ankles). Alteration

or modifications carried out without appropriate authorization may invalidate the

user’s right to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guar-

antee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

□ Relocate or reorient the receiving antenna.

□ Increase the separation between the equipment and receiver.

□ Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

□ Consult the dealer or an experienced radio/TV technician for help.

THIS PACKAGE CONTAINS

1 - ATV30BRGB All-Terrain Speaker System

1 - Bluetooth Multi-Function Controller

1 - Handlebar Mounting Kit

1 - RF RGB LED Remote w/ CR2032 Battery

1 - Quick Connect Power Extension Adaptor

4 - Hi-strength Nylon Mounting Straps

1 - User Manual Quick Start Guide / Poster

1 - Warranty Card

USER MANUAL

QUICK START GUIDE

Thank you for purchasing this

ATV30BRGB All-Terrain Sound System

Please read through these instructions carefully so you will know

how to operate your model properly.

After you have finished reading the instructions, keep this document

in a safe place for future reference.

INFORMATION TO THE USER

INFORMATION TO THE USER

T

he Bluetooth® word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks is under license.

Other trademarks and trade names are those of their respective owners.

CAUTION!!

ADJUSTMENT OR ALTERATIONS OF THIS DEVICE MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

GETTING TO KNOW YOUR

ATV30BRGB MULTIFUNCTION CONTROLLER (MFC)

BEFORE YOU START

IMPORTANT SAFETY PRECAUTIONS

■ Do not operate mobile equipment while driving a motorized vehicle – safe driving and

safety consideration of others should always be your highest priority.

■ In the event you should notice smoke, strange noises or odor from this product, or any

other abnormal signs, immediately turn off the power and consult your dealer or the nearest

authorized

BOSS AUDIO

Service Center. Using this product in this condition may result in

permanent damage to the system.

■ Set your volume control at a low setting, then slowly increase the sound until you can

hear it comfortably without distortion, or ear discomfort.

■

BE SURE TO OBSERVE THE FOLLOWING GUIDELINES

:

- Do not turn up the volume so high that you can’t hear what’s around you.

- Use caution or temporarily discontinue use in potentially hazardous situations.

INSTALLATION PRECAUTIONS

WARNING

- Always consult a professional installer

■ Do not attempt to install or service this product by yourself. Installation or servicing of this

product by persons without professional training and experience in electronic equipment

and motorized vehicle accessories may be dangerous and could expose you to the risk of

electric shock, injury or other hazards

■ Refer any repairs to a qualified

BOSS AUDIO SYSTEMS

Service Center

■ The

ATV30BRGB

can be powered from a vehicles cigarette lighter / auxiliary power port,

or hard wired directly to the battery through an optional relay / accessory switch

■ When wiring directly to the vehicles battery, be sure to disconnect the batteries negative

terminal wire before starting any wiring procedures, it is suggested that an

optional fuse and fuse holder (not included) with minimum rating of

20 Amps

be in line with

the positive battery terminal

■ The ground cable length should not exceed 18-inches (See wiring diagram)

■ The

ATV30BRGB

has a weather resistant design, it should not be submerged in or

under water under any circumstances

■ Use only the installation parts provided with the

ATV30BRGB

GETTING STARTED

1

2

3

4

5

6

7

5

6

7

4

2

3

1

MFC - MULTIFUNCTION CONTROLLER

BLUETOOTH INDICATOR LED - BLUE COLOR

POWER INDICATOR LED - RED COLOR

3.5mm AUX-INPUT

PREVIOUS TRACK / Press and hold for VOL -

PLAY/PAUSE / Press and hold for POWER ON

NEXT TRACK / Press and hold for VOL +

CAUTION!! Using other mounting methods may void this warranty

PAIRING & DISCOVERING A NEW BLUETOOTH CONNECTION

1) Power on the

ATV30BRGB

by pressing and holding down the

Play/Pause

multi-

function button for 3 seconds, the

2

blue and

3

red LEDs will start to alternately flash,

signalling that the ATV30BRGB is now ready for Bluetooth pairing.

NOTE:

You have 2 minutes before you must restart this procedure over again.

2) Now that the

ATV30BRGB

is in pairing mode:

ANDROID users:

a. Go into the

Settings Menu

of your device

b. Enter the

Bluetooth Menu

c.

TURN ON Bluetooth

and press

SCAN

d.

“ATV30BRGB”

will now be displayed under

AVAILABLE DEVICES

e. If prompted, enter passcode: “

0000

”

iOS users:

a. Go into the

Settings Menu

of your

iOS

device

b. Enter the

Bluetooth Menu

c

. TURN ON Bluetooth

d.

“ATV30BRGB”

will now be displayed

e. If prompted, enter passcode: “

0000

”

3) If the

ATV30BRGB

is not seen, repeat the above steps to refresh the “

Device List”

4) When the connection is successful, you are now ready to stream music from your favorite

media player to the

ATV30BRGB

To avoid battery exhaustion, be sure to occasionally run the

vehicles engine while using this product.

Using this product without running the engine can drain the battery.

BLUETOOTH OPERATION

BLUETOOTH OPERATION

RECONNECTION

1) Power on the

ATV30BRGB

and your last paired device Bluetooth.

2) The unit will now automatically reconnect

3) If your device was previously paired with the

ATV30BRGB

, but it wasn’t the last paired

device:

a. Ensure no other devices are currently paired

b. Enter the

Bluetooth Menu

on your device being paired

c.

“ATV30BRGB”

will display under

AVAILABLE DEVICES

d. Choose the

“ATV30BRGB”

to reconnect

4) If the device is out of range from the

ATV30BRGB

, it will disconnect automatically:

a. To reconnect once device is back in range, press the

Play/Pause

button once

b. The

ATV30BRGB

will now reconnect to the device

6

2

3

Tips:

MULTIFUNCTION CONTROLLER BLUETOOTH OPERATION

1) Press the

PLAY/PAUSE

once to start playing music or press the

PLAY

button from

your device touch screen

2) To skip songs or advance, press the

NEXT TRACK

button

3) To select the previous song, press the

PREVIOUS TRACK

button

VOLUME CONTROL

4) To raise the volume

Press and Hold

the

VOL +

button 2 ~ 3 seconds

5) To lower the volume

Press and Hold

the

VOL -


MULTIFUNCTION CONTROLLER AUX-IN OPERATION

1) Power on the

ATV30BRGB

by pressing and holding down the

PLAY/PAUSE

multi-

function button for 3 seconds

2) Disconnect any paired

Bluetooth

device by turning off

Bluetooth

in your devices

Settings Menu

3) Connect the integrated 3.5mm

AUX-IN

cable located on right side of the MFC to your

devices headphone jack

4) Route the wire back to ATV30BRGB, secure your device in a safe posistion

VOLUME CONTROL

5) To raise the volume

Press and Hold

the

VOL +


6) To lower the volume

Press and Hold

the

VOL -


STREAMING MUSIC

Make sure your device Bluetooth volume is set at 75% level

before stowing

AUX-INPUT

Make sure your device headphone volume is set at 75% level

before stowing.

ATV30BRGB

can play audio from any device

that has a 3.5mm headphone audio jack.

YOUR DEVICE

5

7

6

Tips:

Tips:

MULTI-FUNCTION CONTROLLER MOUNTING

LEFT

or

RIGHT

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

FOR ILLUSTRATION PURPOSES

YOUR VEHICLE MAY VARY

RUBBER

SHIM

INSERT

WASHER

LOCK NUT

ALLEN HEAD

BOLT

LOCK NUT

ALLEN HEAD

BOLT

MULTI-FUNCTION

CONTROLLER

UNIT

SNAP

BRACKET

Z-BRACKET

HANDLEBAR

CLAMP

TOOLS NEEDED:

- 12mm Socket, Wrench or Pliers

- 6mm Allen Wrench

BEFORE INSTALLING THIS PRODUCT

When replacing the fuse, be sure to only use a fuse of the rating specified on

this product. To avoid short-circuiting, cover any disconnected leads with insulating

tape. It is especially important to insulate any unused wires, which if left uncovered

may cause a short circuit. When connecting other devices to this product, refer to

the manual for the product to be connected. The black cable is ground, make sure

to connect the ground wire first. Ensure that the ground wire is properly connected

to metal parts of the vehicles body frame or direct to the battery if your vehicle

does not have a grounded chassis frame The ground wire of this units power amp

and a second powered system must be connected to the frame separately with

different screws. If the screw for the ground wire loosens or falls out, it could result

in fire or malfunction.

To avoid potential shorts in the electrical

system, be sure to disconnect the (–) bat

-

tery cable before installation. Use this unit

with a 12-Volt battery and negative ground

-

ing only. Failure to do so may result in a

fire or malfunction.

SPEAKER MOUNTING SUGGESTIONS

BLUETOOTH

®

ENABLED

ALL-TERRAIN SOUND SYSTEM

ATV30BRGB

USER MANUAL

QUICK START GUIDE

ATV30BRGB

USER MANUAL

BLUETOOTH

®

ENABLED | ALL-TERRAIN SOUND SYSTEM

WITH RF RGB LED REMOTE CONTROLLER

PRINTED IN CHINA

VER:1.0 EN

iPod / iPhone are trademarks of Apple Inc. registered in the U.S. and other countries

Android is a trademarks of Google Inc. registered in the U.S. and other countries.

BOSS Audio Systems is not affiliated with Apple Inc. or Google Inc.

0815

BOSS Audio Systems

3451 Lunar Court • Oxnard, CA 93030

www.bossaudio.com

|

805-751-4853

Tech Support: www.bossaudio.com/technical-support

BLUETOOTH

• Version: 3.0 w/ EDR

• A2DP

• Range: 33ft (10m) Class 2

SPEAKERS

• Dimensions: 6.5”

• Impedance: 4Ω

• Cone Type: PP CARBON + RUBBER SURROUND

• Tweeter Size: 1”

PEI SOFT DOME

AMPLIFIER

• Maximum Output Power: 450 Watts

• Input impedance: 10kΩ

• Frequency Response: 45Hz-25kHz

GENERAL

• Operational Power: 14.4VDC (10-16V allowable)

• MAX Current Draw: 13.7A

• Replacement Fuse: 15A AGC TYPE

• Color: Black

• Weight: 14.26lbs / 6.47Kg

• Dimensions cm WxHxD: 72.4 x 20.2 x 29.4

• Dimensions Inches WxHxD: 28.50 x 7.95 x 11.58

SPECIFICATIONS

WIRE DIAGRAM

7.95”

(202mm)

28.50”

(724mm)

11.58”

(294mm

20A

Fuse and fuse holder

(not included)

Chassis

ground

point

BATTERY

Mini-DIN

Connector

Fuse is located inside the power adaptor

Turn counter clockwise to open

Replace with 15A AGC Fuse type only

INSERT

Normally open switch

(not included)

INSERT

OPTIONAL DIRECT BATTERY WIRING CIRCUIT

RED

BLACK

Chassis

ground

point

QUICK RELEASE

POWER ADAPTOR

(INCLUDED)

MFC

POWER ADAPTOR

15A

Ground wire

Metal frame

Recommended 12 ~ 14ga Wire

(not included)

Align arrows

• Storage Temperature: 5

o

F to 113

o

F

/ -15

o

C to 45

o

C

• Operation Temperature: 14

o

F to 140

o

F / -10

o

C to 60

o

C

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

6

5

7

All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including

photocopying, recording, or other electronic or mechanical methods, without the prior written permission of AVA Enterprises Inc.

Copyright © 2015 BOSS AUDIO Inc.

GETTING TO KNOW YOUR

ATV30BRGB LED RF CONTROLLER

A

RF CONTROLLER

1

POWER ON / OFF

2

MODE UP

3

AUTO DEMO (LONG PRESS FOR SINGLE COLOR MODE)

4

SPEED UP

5

BRIGHTNESS UP

6

BRIGHTNESS DOWN

7

MODE DOWN

8

COLOR DOWN

9

COLOR UP

10

SPEED DOWN

A

1

2

3

4

5

6

7

10

9

8

REPLACEMENT BATTERY - CR2032

USING THE REMOTE CONTROL

•

When use for the first time, pull out

the film protruding the tray

•

RF controller range: Up to 25ft (LoS)

•

Do not obstruct the RF remote with metal

•

Always keep away from small children

•

Do not store in direct sunlight

•

Do not submerge in mud and/or water

INSTALLING THE BATTERY

• Slide the tray out on back of the remote

control and insert battery with the (+) and

minus (-) poles pointing in the proper direction

GETTING STARTED

Route strap

through the hole

and to vehicle

frame

Route strap

around the speaker body to vehicle frame

Route strap

through the hole

and to vehicle

frame

CAUTION!!

Mounting straps should be double checked to be sure they are

pulled tight and secure before each use of the vehicle.

MODE

+

SPEED

+

COLOR

+

BRIGHT

+

COLOR

BRIGHT

SPEED

MODE

–

–

–

–

DEMO

ATV30BRGB-UM-POSTER-STYLE-FINAL-v1.0.indd

2

7/31/2015

6:24:57 PM

Boss Audio ATV30BRGB User Manual

Boss Audio ATV30BRGB Manual

Boss Audio ATV30BRGB manual content summary: