Bowflex Motivator Assembly Manual

Assembly Instructions

For The Bowflex Motivator

Before you begin, you will need three wrenches,

a cresent wrench, a

9/16", and a 1/2" open

end wrench, (It is useful to use the cresent wrench to hold one end of a bolt while tightening

with the other) and a phillips head (+) screw driver. Please follow these assembly instructions

carefully.

If you experience any difficulty please call a Bowflex customer service representative

and ask for assistance.

1-800-269-3539.

Unpacking Your Motivator

Your Motivator comes in two boxes.

One Square box and one long box.

See Below

Contents of

square box.

Contents of long box.

1 Base Frame

1 Pulley Frame

1 Lower Mast

1 Rear Legs

1 Standing Platform

1 Bench

1 Seat

2 Handgrips

1 Ankle Cuff

1 Parts and bolt bag

1 Training Manual

1 Set of Assembly Instructions

See Bolt Bag I.D. and size Guide

for Bolt Bag Contents

Please check to make sure all parts are

included. If you are missing any part, please

call a customer service representative at

1-800-269-3539.

1 Main Beam (Seat Rail)

1 Verticle, Rod Box, & Rod Pack Assembly