Bowflex Xtreme 2 SE Assembly Manual

Bowflex Xtreme 2 SE Manual

Get Bowflex Xtreme 2 SE PDF manuals and user guides View all Bowflex Xtreme 2 SE manuals
Add to My Manuals
Save this manual to your list of manuals

Bowflex Xtreme 2 SE manual content summary:

  • Bowflex Xtreme 2 SE | Assembly Manual - Page 1
    The Bowflex Xtreme® 2 SE Home Gym Assembly Manual 001-7033-040111.D
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 2
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 3
    Precautions. For information on how to use your Bowflex Xtreme® 2 SE home gym, refer to the Bowflex Xtreme® 2 SE Owner's Manual. Table of Contents Important Safety Instructions 1 Before Assembly 2 Parts Reference Guide 3 Hardware Guide 5 Assembly Guide 6 Cable & Pulley Routing 15 Contacts 24
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 4
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 5
    the Owner's Manual. • Read and understand the complete Owner's Manual supplied with this machine before first use. Keep the Owner's and Assembly Manuals for future reference. • Do all assembly steps in the sequence given. Incorrect assembly can lead to injury. Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 6
    instructions before attempting to assemble your Bowflex Xtreme® 2 SE home gym. Select where you are going to locate your machine carefully. The best place for your Bowflex Xtreme® 2 SE home gym is on a hard, level surface. Select a workout area that provides a minimum clearance behind the rod box
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 7
    Parts Reference Guide 17 20 30 29 19 28 26 22 45 39 3 32 21 4 48 1 35 42 18 11 33 10 12 40 22 25 33 37 38 32 39 32 39 39 32 16 31 36 34 44 22 39 32 5 14 39 32 7 39 32 27 28 29 30 8 6 2 NOTE: CABLES ARE NOT SHOWN FOR CLARITY 15 25 Bowflex Xtreme® 2 SE Assembly Manual 3
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 8
    -13x5.25 BUTTON HEAD SCREW 0.3125-18x2.5 BUTTON HEAD SCREW 0.3125-18x0.75 THREADED STUD 0.500-13x9.5 NYLOCK NUT 0.500-13 NYLOCK NUT 0.375-16 ROD CABLES ASSEMBLY, PR SQUAT CABLES ASSEMBLY, PR SEAT LOCKING PIN BUTTON HEAD SCREW 0.375-16x2.75 AB CRUNCH CROSSBAR 4 Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 9
    Hardware Guide Tools you will need: You will need the tools listed below to complete the assembly of your Bowflex Xtreme® 2 SE home gym. If you don't have these tools, you can 37 39 33 34 41 38 49 Cable End Stop Ball 48 35 42 45 39 36 31 32 Bowflex Xtreme® 2 SE Assembly Manual 5
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 10
    Frame 2-1 Lay parts on floor as shown. Firmly slide Rod Box into Lower Lat Tower Frame. 2-2 Fasten the Rod Box to the Lower Lat Tower Frame with screws and washers as shown. Tighten screws until snug. 6 Bowflex Xtreme® 2 SE Assembly Manual Self Threading Screws Flat Washers Rod Box w/ Rods
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 11
    Rail onto the Base Frame connector as shown. 4-2 S lide the top of the Seat Support Rail onto the Lower Lat Tower Assembly connector as shown. Secure using screws and washers as shown. Finger tighten screws at this time. Flat Washer Button Head Screw Bowflex Xtreme® 2 SE Assembly Manual 7
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 12
    Frame. 5" Button Head Screw 3/4" Button Head Screw Flat Washer Detail 5a Button Head Screw Flat Washer Slider Pulley Left Squat Frame Connector Flat Washer Nylock Nut Left Squat Pulley Frame Button Head Screw Flat Washer Detail 5b Left Frame Rail 8 Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 13
    • Main Assembly Tools: 3/16 Hex Wrench Slider Pulley w/ Cable Assembly 7-1 Install a Slider Pulley onto each Pulley Arm as shown. 7-2 C hoose any of the four holes to secure. Left Pulley Arm Nylock Nut Flat Washer Slider Pulley w/ Cable Assembly Bowflex Xtreme® 2 SE Assembly Manual 9
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 14
    and secure with end caps. A rubber mallet may be needed to secure the end caps. Note: The Leg Extension may be adjusted during workout to best suit your height and personal preferences. 10 Bowflex Xtreme® 2 SE Assembly Manual End Caps Foam Rollers Chrome Tubes Leg Extension Backbone Lock Knob
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 15
    shown. Lock Knob Leg Extension Backbone Seat Backbone Step 11  Install Seat Back Pad Note: T he back of the Seat Back Pad has two pairs of holes. Select the appropriate set based on your height. Seat Support Rail Washer Button Head Screw Parts: • Seat Back Pad • Main Assembly Hardware
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 16
    in the Seat Backbone hooks to secure the seat assembly on the Seat Support Rail as shown in Figure 12b. Note: R everse procedure to remove seat. Detail 12a Seat Backbone Seat Support Rail Detail 12b - Back View Seat Locking Pin installed 12 Bowflex Xtreme® 2 SE Assembly Manual Seat Locking
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 17
    Assembly Guide Step 13  Upper Lat Tower Assembly Parts: • Upper Lat Tower • Lat Cross Bar • Rear Lat Crossmember Hardware: • 2 Button Bar with those on the Upper Lat Tower as shown. 13-2 Attach using 3/8" screws, washers and nuts as shown. Note: Do Bowflex Xtreme® 2 SE Assembly Manual 13
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 18
    the end of each screw. Attach the Lat Pulley Housing to the Lat Tower by installing the screws loosely into the aligned holes as shown in Figure 15b. Do not tighten hardware at this time. Detail 15a Figure 15b Ab Bracket on Lat Tower 14 Bowflex Xtreme® 2 SE Assembly Manual Flat Washer Button Head
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 19
    Assembly Guide Step 16 Cable and Pulley Routing - Overview The figure below shows all Pulleys on the Bowflex Xtreme 2 SE home gym. Subsequent images show how to connect and route each of the Cables through the Pulleys. (The Ab Crunch Station is not shown for clarity.) Connecting the Cables is much
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 20
    cable beneath and then over one Lat Pulley (2), following the arrows shown in Figure 20 and holding the cable tightly where indicated. 17-3 R epeat for the Left Pulley Cable (on the Left Frame Rail), without loosening your grip on the Right Pulley Cable. 16 Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 21
    in the Lat Pulley Housing and Lat Pulleys as shown in Figure 18. Tighten all hardware. Note: Y ou will probably need to push the Power Rod® unit out of the way for this step. The Power Rod® unit is not pictured for the sake of clarity. Bowflex Xtreme® 2 SE Assembly Manual 17
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 22
    attach the Cable Core to keep the Cable from slipping back through the Pulleys. See Figure 19b. Note: T he Cable End Stop Ball Core 3 should fit over the Ferrue when installed correctly. Rotate the Core to align it with the groove in the Ball. 18 Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 23
    and (3) and (8) Floating Pulleys, as shown in Figure 19c. Note: O nce the Cable End Stop Balls are attached, hook each Rod Hook onto the Lat Pulley Housing as shown in Figure 19d. Figure 19c 5 4 2 3 Figure 19d - Rod Hooks Storage on Lat Pulley Housing Bowflex Xtreme® 2 SE Assembly Manual 19
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 24
    to guide the Cable down through the Inner Right Frame Rail Pulley (9), up through the Right Pulley Arm Pulley (10), as shown in Figure 20. Finally, insert the Cable End through the Cable End Stop Ball and attach the Cable Core, as completed during Step 19. 20 Bowflex Xtreme® 2 SE Assembly Manual
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 25
    Assembly Guide 10 8 6 9 7 Step 20b Cable and Pulley Routing - Connect Left Squat Cable through the Floating and Main Assembly Pulleys Repeat the same procedure completed during Step 20 for the Left Squat Cable. Bowflex Xtreme® 2 SE Assembly Manual 21
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 26
    21 Cable & Pulley Routing Attach the hooks on the ends of the Left and Right Squat Cables to the Hook installed onto the Leg Extension, as shown in Figure 21. Step 22  Final Inspection Please inspect your machine to ensure that all fasteners are tight and components are properly assembled. Review
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 27
  • Bowflex Xtreme 2 SE | Assembly Manual - Page 28
    / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, [email protected] | Asia Pacific & Latin America (360) 859- , Inc. (www.NautilusInc. com) trademarks include NAUTILUS®, BOWFLEX®, XTREME®, SCHWINN® and UNIVERSAL® and respective logos. Other trademarks
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
The Bowflex Xtreme
®
2 SE
Home Gym
Assembly Manual
001-7033-040111.D