Brother International MFC-J5930DW Quick Setup Guide
Brother International MFC-J5930DW Manual
 |
View all Brother International MFC-J5930DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Brother International MFC-J5930DW manual content summary:
- Brother International MFC-J5930DW | Quick Setup Guide - Page 1
. solutions.brother.com/videos Ink Cartridges • Black • Yellow • Cyan • Magenta Quick Setup Guide Basic User's Guide Product Safety Guide Brother Installation Disc Maintenance Sheet Telephone Line Cord NOTE Manuals in Spanish for this model are available at support.brother.com. Manuales en - Brother International MFC-J5930DW | Quick Setup Guide - Page 2
apps. For instructions, see the Online User's Guide. (USA only) For more information on apps, visit www.brother-usa.com/connect. Additional Wireless Support: solutions.brother.com/wireless-support For FAQs, Troubleshooting, and to download software and manuals, visit support.brother.com. © 2018
-
1 -
2
 |
 |
NOTE
Manuals in Spanish for this model are available at
support.brother.com
.
Manuales en Español para este modelo están disponibles en
support.brother.com
.
•
Most of the illustrations in this Quick Setup Guide show the MFC-J5930DW.
•
Save all packing materials and the box in case for any reason you must ship your
machine.
•
You must purchase the correct interface cable for the interface you want to
use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 16 feet
(5 meters) long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
2
Load plain Letter/A4 paper
For loading other paper sizes and types, see
Paper Handling
in the
Basic User’s Guide
.
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Pull the paper tray completely out of
the machine as shown by the arrow.
Take off the tray top cover.
Fan the paper well.
Connect the telephone line cord.
Use the jack marked
LINE
and guide
the cord out the back of the machine.
Lift the scanner cover.
Close the scanner cover.
When the machine has finished the initial cleaning
process, follow the Touchscreen instructions to
configure the machine settings.
•
Check print quality
• Configure the tray or paper size settings
•
View operation tips
•
Set Brother LCD Message defaults
•
Print the installation sheet
Open the ink cartridge cover and remove
the orange protective part from the machine.
Load the paper in the tray.
Connect the power cord. The machine
will power on automatically.
Adjust the paper guides.
Do not exceed this
mark (
bbb
).
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below. Before you
connect the external telephone, remove the white
protective cap
c
from the
EXT.
jack of the machine.
NOTE
You can adjust the control panel angle
to read the Touchscreen more easily.
NOTE
Follow the Touchscreen instructions to store
the orange protective part inside the machine.
If you must transport the machine, remove
the ink cartridges and replace this part.
a.
Extension telephone
b.
External telephone
c.
Protective cap
Quick Setup Guide
MFC-J5830DW / MFC-J5930DW
Read the
Product Safety Guide
first, then read this
Quick Setup Guide
for the correct installation procedure.
3
Connect the
power cord
5
Install the starter ink cartridges
4
Set the date
and time
6
Machine settings
D009D5001-02
USA/CAN
Version B
Ink Cartridges
•
Black
•
Yellow
•
Cyan
•
Magenta
Quick Setup Guide
Basic User’s Guide
Product Safety Guide
Brother Installation Disc
Maintenance Sheet
Telephone Line Cord
The correct Receive Mode is determined by the external devices
and telephone subscriber services (Voice Mail, Distinctive Ring,
etc.) you will be using on the same line as the Brother machine.
For more information, see
Receive Modes Overview
in
chapter 6
of the
Basic User’s Guide
.
1.
Press
[Settings]
>
[All Settings]
>
[Initial Setup]
>
[Local Language]
.
2.
Press your language.
3.
Press
.
1.
Press
[Settings]
>
[All Settings]
>
[Fax]
>
[Setup Receive]
>
[Receive Mode]
.
2.
Press your preferred Receive Mode.
3.
Press
.
Store your name and fax number so the machine prints it on all
outgoing fax pages.
For more information, see
Enter Text on Your Brother Machine
in
Appendix
of the
Basic User’s Guide
.
1.
Press
[Settings]
>
[All Settings]
>
[Initial Setup]
>
[Station ID]
>
[Fax]
.
2.
Enter your fax number (up to 20 digits) on the Touchscreen,
and then press
[OK]
.
3.
Press
[Name]
.
4.
Enter your name (up to 20 characters) using the Touchscreen,
and then press
[OK]
.
5.
Press
.
10
Set your Station ID
If you are not using your machine as a fax, go to
11
7
Connect the telephone line cord
If you are not using your machine as a fax, go to
8
9
Choose the correct
Receive Mode
If you are not using your machine as a fax, go to
11
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals
Follow the Touchscreen instructions
to set the date and time.
Pull out the paper support
until it locks into place.
Put on the tray top cover, and
then slowly push the paper tray
completely into the machine.
Follow the Touchscreen
instructions to unpack and
install the ink cartridges. The
machine will prepare the ink
tube system for printing.
Quickly shake just the
black
ink cartridge horizontally
15 times as shown, before
inserting it into the machine.
8
Choose your language
(if needed)
1
2
3
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos