Brother International TJ-4520TN Users Guide

Brother International TJ-4520TN Manual

Get Brother International TJ-4520TN PDF manuals and user guides View all Brother International TJ-4520TN manuals
Add to My Manuals
Save this manual to your list of manuals

Brother International TJ-4520TN manual content summary:

  • Brother International TJ-4520TN | Users Guide - Page 1
    User'sGuideTJ-420TN/TJ-4520TN/TJ-4620TN/TJ-42TN/TJ-452TN TJ-4420TN/TJ-4520TN/TJ-4620TN User's Guide (English) TJ-4422TN/TJ-4522TN © 2020 Brother Industries, Ltd. All rights reserved. Version 01 ENG
  • Brother International TJ-4520TN | Users Guide - Page 2
    Information in this document is subject to change without notice and does not represent a commitment on the part of the company. No part of this manual may be reproduced or transmitted in any form or by any means, for any purpose other than the purchaser's personal use, without the expressed written
  • Brother International TJ-4520TN | Users Guide - Page 3
    Contents 1. Introduction ...1 1.1 Product Introduction 1 1.2 Additional Product Reference 1 2. Operations Overview 2 2.1 Unpack the Label Printer and Check the Components 2 2.2 Printer Overview 3 2.2.1 Front View 3 2.2.2 Interior View 5 2.2.3 Rear View 7 2.3 Control Panel 9 2.3.1 LED
  • Brother International TJ-4520TN | Users Guide - Page 4
    Management Tool (BPM 76 8.1 Start the BPM 76 8.2 Auto-Calibrating the Media Sensor using the BPM 77 9. Product Specifications 78 9.1 Recommended microSD Cards 81 10. Troubleshooting 82 10.1 Common Problems 82 10.2 Error Messages 85 11. Maintenance ...86 iii
  • Brother International TJ-4520TN | Users Guide - Page 5
    the CG Triumvirate Bold Condensed smooth scalable font. It also provides a choice of eight different sizes of the alphanumeric bitmap font and supports most of the standard barcode formats. 1.2 Additional Product Reference For information on how to write custom programs for your label printer, see
  • Brother International TJ-4520TN | Users Guide - Page 6
    Printer a. TJ-4420TN/TJ-4520TN/TJ-4620TN b. TJ-4422TN/TJ-4522TN 2. Power Cord 3. USB Cable If any components are missing, contact the product manufacturer's customer service or your local dealer. 2
  • Brother International TJ-4520TN | Users Guide - Page 7
    2.2 Printer Overview 2.2.1 Front View TJ-4420TN/TJ-4520TN/TJ-4620TN 1. Power LED 2. LCD 3. Selection Buttons 4. Navigation Buttons 5. USB Host Ports 6. Media View Window 7. Media Output Slot 8. Media Cover Handle 9. Media Cover 3
  • Brother International TJ-4520TN | Users Guide - Page 8
    TJ-4422TN/TJ-4522TN 1. Power LED 2. Touchscreen 3. Selection Buttons 4. Navigation Buttons 5. USB Host Ports 6. Media View Window 7. Media Output Slot 8. Media Cover Handle 9. Media Cover 10. Base Cover 4
  • Brother International TJ-4520TN | Users Guide - Page 9
    Release Lever 5. Ribbon Supply Spindle 6. Label Roll Guard 7. Label Supply Spindle 8. External Label Entry Slot 9. Damper 10. Print Head 11. Platen Roller 12. Front Label Guide 13. Ribbon Sensor 14. Black Mark Sensor (shown as ) 15. Gap Sensor (shown as ) 5
  • Brother International TJ-4520TN | Users Guide - Page 10
    Head Release Lever 5. Base Cover 6. Ribbon Supply Spindle 7. Media Level Sensor 8. Label Roll Guard 9. Label Supply Spindle 10. Media Guide Bar and Rear Label Guide 11. Media Rewind Guide 12. Media Rewind Spindle 13. External Label Entry Slot 14. Damper 15. Print Head 16. Platen Roller 17. Label
  • Brother International TJ-4520TN | Users Guide - Page 11
    2.2.3 Rear View TJ-4420TN/TJ-4520TN/TJ-4620TN 1. External Label Entry Slot 2. RS-232C Serial Port 3. Ethernet Port 4. USB Port (USB 2.0/Hi-Speed Mode) 5. microSD Card Slot 1 6. Wi-Fi and Bluetooth Interface Expansion Port 2 7. Power Switch 8. Power Cord Socket 1 For the recommended microSD card
  • Brother International TJ-4520TN | Users Guide - Page 12
    TJ-4422TN/TJ-4522TN 1. External Label Entry Slot 2. Wi-Fi and Bluetooth Interface Expansion Port 1 3. RS-232C Serial Port 4. Ethernet Port 5. USB Port (USB 2.0/Hi-Speed Mode) 6. microSD Card Slot 2 7. Power Switch 8. Power Cord Socket 1 For the optional WLAN / BT Interface (PA-WB-001). 2 For the
  • Brother International TJ-4520TN | Users Guide - Page 13
    2.3 Control Panel TJ-4420TN/TJ-4520TN/TJ-4620TN TJ-4422TN/TJ-4522TN 9
  • Brother International TJ-4520TN | Users Guide - Page 14
    2.3.1 LED Indicators and Buttons LED Indications LED Color Green (Lit) Green (Flashing) Amber (Lit) Red (Lit) Red (Flashing) Description The power is on and the printer is ready to use. - The printer is downloading data from a computer. - The printer is paused. The printer is removing data from
  • Brother International TJ-4520TN | Users Guide - Page 15
    2.3.2 Home Screen Icons Printer Status Icons Icon Indication Wi-Fi device is ready (Available when the Wi-Fi Interface is installed) Bluetooth device is ready (Available when the Bluetooth Interface is installed) Ethernet is connected Media capacity Ribbon capacity (m) Security lock
  • Brother International TJ-4520TN | Users Guide - Page 16
    2.3.3 Screen Overview Select the icons to access printer features and change settings. TJ-4420TN/TJ-4520TN/TJ-4620TN TJ-4422TN/TJ-4522TN 12
  • Brother International TJ-4520TN | Users Guide - Page 17
    Access the Main Menu TJ-4420TN/TJ-4520TN/TJ-4620TN Make sure the printer's LCD displays "Ready". If not, press the left Selection button. To select an option on the Main Menu, use the Navigation buttons to browse the options and then press the button under the icon. 13
  • Brother International TJ-4520TN | Users Guide - Page 18
    TJ-4422TN/TJ-4522TN Make sure the printer's Touchscreen displays "Ready". If not, tap the Menu icon . Note You can also use the Control Panel buttons. Use the Navigation buttons to select the Menu icon, and then press the Selection button under the icon. To select an option on the Main Menu, tap the
  • Brother International TJ-4520TN | Users Guide - Page 19
    's screen, initialization, cutter type, or media low warning settings. File Manager Check or manage the available printer memory. Diagnostic Check the printer status to help troubleshoot any issues. Note For more information about printer settings, see section 7. Change Printer Settings. 15
  • Brother International TJ-4520TN | Users Guide - Page 20
    Favorites (TJ-4422TN/TJ-4522TN) Add frequently used Main Menu options to "Favorites" for quick access. To display the "Favorites" list, tap the Favorites icon . To add an option to the "Favorites" list: 1. Tap and hold the option you want to add to favorites until "Join Favorites" appears. 2. Tap "
  • Brother International TJ-4520TN | Users Guide - Page 21
    To remove an option from the "Favorites" list: 1. Tap and hold the option you want to remove from favorites until "Delete Favorites" appears. 2. Tap "Yes". 17
  • Brother International TJ-4520TN | Users Guide - Page 22
    3. Set Up Your Printer 3.1 Connect the Power Cord 1. Place the printer on a flat, secure surface. 2. Make sure the Power Switch is in the OFF position. 3. Connect the printer to the computer using a USB cable. 4. Plug the Power Cord into the Power Cord Socket at the rear of the printer, and then
  • Brother International TJ-4520TN | Users Guide - Page 23
    3.2 Load the Ribbon Unless indicated otherwise, the illustrations in this User's Guide show the TJ-4422TN/TJ-4522TN. Ribbon loading path Ink coated inside 1. Open the Media Cover. Ink coated outside 2. Install the ribbon onto the Ribbon Supply Spindle. 19
  • Brother International TJ-4520TN | Users Guide - Page 24
    3. Push the Print Head Release Lever to open the Print Head. 4. Thread the ribbon under the ribbon guide bar and through the ribbon sensor slot following the loading path printed on the Media Cover. 5. Wind the Ribbon Rewind Spindle counterclockwise about three to
  • Brother International TJ-4520TN | Users Guide - Page 25
    6. Close the Print Head by pushing down on both sides of the Print Head Release Lever. 21
  • Brother International TJ-4520TN | Users Guide - Page 26
    3.3 Remove Used Ribbon Unless indicated otherwise, the illustrations in this User's Guide show the TJ-4422TN/TJ-4522TN. 1. Cut the used ribbon with scissors along the dotted line. 2. While pushing the Ribbon Release Button (1), remove the ribbon
  • Brother International TJ-4520TN | Users Guide - Page 27
    3.4 Load the Media Unless indicated otherwise, the illustrations in this User's Guide show the TJ-4422TN/TJ-4522TN. 3.4.1 Load Label Roll Label Roll loading path 1. Open the Media Cover. 2. Slide the Label Roll Guard horizontally to the
  • Brother International TJ-4520TN | Users Guide - Page 28
    up. 4. (TJ-4420TN/TJ-4520TN/TJ-4620TN) Push the Print Head Release Lever and thread the label through the Damper, Media Sensor, and Front Label Guide to install the media. (TJ-4422TN/TJ-4522TN) Push the Print Head Release Lever and thread the label through the Media
  • Brother International TJ-4520TN | Users Guide - Page 29
    matches the position of the Gap/Black Mark on the label roll. Black Mark Sensor (shown as ) Gap Sensor (shown as ) 6. Adjust the Front Label Guide to fix the media position. Note • Make sure you thread the media through the Media Sensor. • The sensor locations are marked by the triangle mark
  • Brother International TJ-4520TN | Users Guide - Page 30
    3.4.2 Load External Media Unless indicated otherwise, the illustrations in this User's Guide show the TJ-4422TN/TJ-4522TN. Fan-fold label loading path External media loading path 1. Open the Media Cover. 26
  • Brother International TJ-4520TN | Users Guide - Page 31
    Slot. 3. (TJ-4420TN/TJ-4520TN/TJ-4620TN) Push the Print Head Release Lever and thread the label through the Damper, Media Sensor, and Front Label Guide to install the media. Align the Label Roll Guard with the label width. (TJ-4422TN/TJ-4522TN) Push the Print Head Release Lever and thread
  • Brother International TJ-4520TN | Users Guide - Page 32
    sure the position of the Gap or Black Mark Sensor matches the position of the Gap/Black Mark on the label. 5. Adjust the Front Label Guide to fix the media position. Note • Make sure you thread the media through the Media Sensor. • The sensor locations are marked by the triangle mark
  • Brother International TJ-4520TN | Users Guide - Page 33
    3.4.3 Load the Media in Peeler Mode (Optional for TJ-4420TN/TJ-4520TN/TJ-4620TN) 1. Open the Media Cover. 2. Slide the Label Roll Guard horizontally to the end of the Label Supply Spindle, and then flip down the Label Roll Guard. 3. Place the label roll on the Label Supply Spindle and then flip the
  • Brother International TJ-4520TN | Users Guide - Page 34
    thread the label through the Damper, Media Sensor, and Front Label Guide to install the media. 5. Move the Media Sensor by adjusting Black Mark Sensor (shown as ) Gap Sensor (shown as ) 6. Adjust the Front Label Guide to fix the media position. Note • Make sure you thread the media through the Media
  • Brother International TJ-4520TN | Users Guide - Page 35
    media in Peeler Mode to avoid paper jams. 2. Make sure you thread the label over the Media Guide Bar and under the Damper as shown. 10. Turn the Print Head Release Lever, Label Guide Release Lever and Peel-Off Kit, and pull approximately 650 mm of the label roll through the Media
  • Brother International TJ-4520TN | Users Guide - Page 36
    12. Thread the liner through the Label Peeler Cover Slot. 13. Wrap the liner around the paper core and adhere the liner to the Media Rewind Spindle. Wind the liner on the Media Rewind Spindle until the liner is fully stretched. Note The paper core is not included in the box. Use the one you have. 14
  • Brother International TJ-4520TN | Users Guide - Page 37
    the label print side is facing up. 4. Push the Print Head Release Lever and thread the label through the Damper, Media Sensor, and Front Label Guide to install the media. 33
  • Brother International TJ-4520TN | Users Guide - Page 38
    matches the position of the Gap/Black Mark on the label roll. Black Mark Sensor (shown as ) Gap Sensor (shown as ) 7. Adjust the Front Label Guide to fix the media position. Note • Make sure you thread the media through the Media Sensor. • The sensor locations are marked by the triangle mark
  • Brother International TJ-4520TN | Users Guide - Page 39
    8. Close the Print Head on both sides and make sure it locks into place. 9. Set the media sensor type and calibrate the selected sensor. 10. Perform the calibration using the BPM. For more information about sensor calibration, see section 8.2 Auto-Calibrating the Media Sensor using the BPM. 11.
  • Brother International TJ-4520TN | Users Guide - Page 40
    3.4.5 Load Media in Rewind Mode (For TJ-4422TN/TJ-4522TN) 1. Open the Media Cover. 2. Slide the Label Roll Guard horizontally to the end of the Label Supply Spindle, and then flip down the Label Roll Guard. 36
  • Brother International TJ-4520TN | Users Guide - Page 41
    the label roll, slide the Media Level Sensor up. 4. Push the Print Head Release Lever and thread the label through the Media Guide Bar, Damper, Media Sensor, and Front Label Guide to install the media. Align the Label Roll Guard with the label width. 5. Move the Media Sensor by adjusting the Media
  • Brother International TJ-4520TN | Users Guide - Page 42
    6. Adjust the Front Label Guide to fix the media position. Note • Make sure you thread the media through the Media Sensor. • The sensor calibration first, and set the printer mode to Rewind Mode. 10. Open the Media Cover, and then push the Label Guide to the far right side and pull it down. 38
  • Brother International TJ-4520TN | Users Guide - Page 43
    Spindle. Note The paper core is not included in the box. Use the one you have. 12. Open the Print Head Release Lever and Label Guide Bar Release Lever, and pull approximately 650 mm of the label roll through the Media Output Slot. 13. Feed the leading edge of the media
  • Brother International TJ-4520TN | Users Guide - Page 44
    15. Adjust the Media Rewind Guide to fit the label width. 16. Close the Print Head Release Lever and Base Cover. 40
  • Brother International TJ-4520TN | Users Guide - Page 45
    4. Improve Print Quality 4.1 Adjust Print Head Tension to Improve Print Quality Unless indicated otherwise, the illustrations in this User's Guide show the TJ-4422TN/TJ-4522TN. For the best print quality, adjust the Print Head using the Print Head Tension Adjustment Knob. Choose one of
  • Brother International TJ-4520TN | Users Guide - Page 46
    4.2 Adjust Ribbon Tension to Avoid Wrinkled Labels Wrinkles can occur due to many factors, including media width and thickness, Print Head pressure balance, ribbon film characteristics, and print density/darkness settings. 4.2.1 Adjust Ribbon Tension To avoid wrinkled labels, adjust the ribbon
  • Brother International TJ-4520TN | Users Guide - Page 47
    The Ribbon Tension Adjustment Screw has five levels for adjustment. Use a flat blade screwdriver to change the ribbon tension level. Ribbon Tension Adjustment Scale Ribbon Tension Adjustment Screw Adjustable Printer Parts The Print Head Tension Adjustment Knob has five setting levels. Turn the
  • Brother International TJ-4520TN | Users Guide - Page 48
    1. Turn the Ribbon Tension 1. Turn the Ribbon Tension Adjustment Screw clockwise once Adjustment Screw per level on the Ribbon Tension counterclockwise once per level Adjustment Scale and print the on the Ribbon Tension label again to check if the wrinkle Adjustment Scale and print the is
  • Brother International TJ-4520TN | Users Guide - Page 49
    Try Different Media Make sure you load the correct paper. Note For more information about the supported paper width and thickness, see section 9. Product Specifications. Note If the wrinkles continue to occur, contact the product manufacturer's customer service or your local dealer for service. 45
  • Brother International TJ-4520TN | Users Guide - Page 50
    5. Printing 5.1 Printer Driver Installation Note The model name and serial number are located on the back of the printer. Make sure you download the correct driver for your model: • TJ-4420TN/TJ-4422TN: Brother TJ-44 • TJ-4520TN/TJ-4522TN: Brother TJ-45 • TJ-4620TN: Brother TJ-46 The driver
  • Brother International TJ-4520TN | Users Guide - Page 51
    see the driver installation guide provided with the driver. 1. Connect your printer to the computer using a USB cable. 2. Visit support.brother.com, go to 4. Follow the on-screen instructions. Note If you cannot install the printer driver:  Install the printer driver manually: In the Seagull Driver
  • Brother International TJ-4520TN | Users Guide - Page 52
    and select a printer. 3. Run the Seagull Driver Wizard application and select Install printer drivers and Bluetooth. 4. Follow the on-screen instructions. Note If you cannot install the printer driver:  Remove the printer drivers: In the Seagull Driver Wizard application, select Remove printer
  • Brother International TJ-4520TN | Users Guide - Page 53
    your system administrator, or Internet service provider. 1. Configure the network printer's IP address appear on the screen. 2. Visit support.brother.com, go to your model's Downloads page, and port you created. 9. Follow the on-screen instructions. Note If you cannot install the printer driver:
  • Brother International TJ-4520TN | Users Guide - Page 54
    a default IP address and displays it on the screen. 2. Visit support.brother.com, go to your model's Downloads page, and download the Specify Port window and select the port you created. 9. Follow the on-screen instructions. Note If you cannot install the printer driver:  Remove the printer drivers
  • Brother International TJ-4520TN | Users Guide - Page 55
    5.2 Create and Print Labels Using BarTender BarTender is a label creation tool, which can be downloaded for free from the product's page at support.brother.com. 1. Launch BarTender. • For Windows 10, Windows Server 2016, or Windows Server 2019: Start > BarTender 2016 R7 UltraLite > click BarTender
  • Brother International TJ-4520TN | Users Guide - Page 56
    6. Operation 6.1 Power-on Utilities There are various power-on utilities to set up and test the printer's functions. Use power-on utilities to set sensor calibration, self-test, and factory default functions. 1. Turn off the label printer. 2. Press and hold the right Selection button, and then
  • Brother International TJ-4520TN | Users Guide - Page 57
    command  For the Black Mark Sensor: send the BLINE command For more information about the available commands, see the FBPL Command Reference on your model's Manuals page at support.brother.com. 53
  • Brother International TJ-4520TN | Users Guide - Page 58
    command  For the Black Mark Sensor: send the BLINE command For more information about the available commands, see the FBPL Command Reference on your model's Manuals page at support.brother.com. 54
  • Brother International TJ-4520TN | Users Guide - Page 59
     Self-test Print the printer configuration after you run Gap/Black Mark Sensor calibration. The self-test printout lists the printer's configuration and available memory, and can indicate if there is any dot damage on the heater component. Self-test printout Model name Firmware version Firmware
  • Brother International TJ-4520TN | Users Guide - Page 60
    Self-test printout Bluetooth configuration Printer name Mac Address DHCP IP Address Subnet Mask Gateway RAW Port Wi-Fi configuration Number of downloaded files Total and available memory space Print Head check pattern 56
  • Brother International TJ-4520TN | Users Guide - Page 61
     Dump Mode Note  Dump Mode requires 101.5 mm wide paper.  To resume normal printing, turn the printer off and then on again. The printer enters Dump Mode after printing the printer configuration. Dump Mode allows users to verify and debug the printer's programs. The characters in the left column
  • Brother International TJ-4520TN | Users Guide - Page 62
    6.1.3 Printer Initialization Printer initialization clears the printer's DRAM and restores its factory settings. 1. Turn off the printer. 2. Press and hold the right Selection button, and then turn on the Power Switch. 3. Release the button when Factory Default appears on the screen. Note The LED
  • Brother International TJ-4520TN | Users Guide - Page 63
    6.1.4 Media Sensor Calibration (for the Black Mark Sensor) 1. Turn off the printer. 2. Press and hold the right Selection button, and then turn on the Power Switch. 3. Release the button when Bline Calibration appears on the screen. Note The LED color will change as follows: Amber (lit)  red (5
  • Brother International TJ-4520TN | Users Guide - Page 64
    6.1.6 Skip the AUTO.BAS Program You can upload the AUTO.BAS program to the printer's flash memory so that it runs automatically at startup, but if you do not want it to run automatically, follow these steps: 1. Turn off the printer. 2. Press and hold the right Selection button, and then turn on the
  • Brother International TJ-4520TN | Users Guide - Page 65
    7. Change Printer Settings 7.1 Setting Menu TJ-4420TN/TJ-4520TN/TJ-4620TN 1. From the Main Menu, select Setting. 2. Select the programming language you want in Command Set. 3. Press the button under the icon. TJ-4422TN/TJ-4522TN 1. In the Main Menu, tap Setting. 2. Tap Command Set, and then select
  • Brother International TJ-4520TN | Users Guide - Page 66
    7.1.1 FBPL Settings Available FBPL settings: Menu Setting FBPL Speed Slew Speed Back Speed Density Direction Print Mode Offset Shift X Shift Y Reference X Reference Y Code Page Country Batch Mode None Cutter Batch Rewinder Mode Peeler Mode1 Cutter Mode1 1 Available for TJ-4420TN, TJ-4520TN, and
  • Brother International TJ-4520TN | Users Guide - Page 67
    Setting Print Mode Offset Shift X Shift Y Reference X Reference Y Code Page Country Description Set the Print Mode. Print Mode Batch Mode None Cutter Batch Rewinder Mode Peeler Mode Cutter Mode Description When the image is printed, the Gap/Black Mark is fed through the tear plate for tear away.
  • Brother International TJ-4520TN | Users Guide - Page 68
    7.1.2 ZPL2 Settings Available ZPL2 settings: Menu Setting ZPL2 Darkness Print Speed Slew Speed BackFeed Speed Tear Off Print Mode Print Width List Fonts List Images List Formats List Setup Control Prefix Format Prefix Delimiter Char Media Power Up Head Close Label Top Left Position Reprint Mode
  • Brother International TJ-4520TN | Users Guide - Page 69
    Setting Slew Speed BackFeed Speed Tear Off Print Mode Description Set up the printer feed speed. Settings range from:  2 - 8 for 203 dpi  2 - 8 for 300 dpi  2 - 6 for 600 dpi Set up the printer backfeed speed. Settings range from:  2 - 3 for 203 dpi  2 - 3 for 300 dpi  2 - 3 for 600 dpi
  • Brother International TJ-4520TN | Users Guide - Page 70
    Setting Head Close Label Top Left Position Reprint Mode Format Convert Description Set the media action when you close the Print Head. Action Description Feed The printer ejects one label. Calibration The printer calibrates the sensor levels, determines the label length, and feeds one label.
  • Brother International TJ-4520TN | Users Guide - Page 71
    . The printer feeds up to three gap labels to calibrate the sensor sensitivity automatically. If "Auto Calibration" cannot apply to the media, use the "Manual Calibration" function to set the paper length and gap/BLINE size, and then scan the backing/mark to calibrate the sensor sensitivity. Set the
  • Brother International TJ-4520TN | Users Guide - Page 72
    7.3 Interface Settings Set the printer interface settings. Menu Interface Serial Ethernet Wi-Fi Bluetooth 7.3.1 Serial Communication Settings Set the printer RS-232 settings. Menu Interface Serial Baud Rate Parity Data Bits Stop Bit(s) 9600 bps 4800 bps 2400 bps 1200 bps 115200 bps 57600
  • Brother International TJ-4520TN | Users Guide - Page 73
    7.3.2 Ethernet Settings Configure your printer's Ethernet (wired) connection and check its status. When the Ethernet is connected, the Ethernet icon and IP address appear on the screen as shown below. Menu Interface Ethernet Status Configure Item Status Configure Description Check the Ethernet
  • Brother International TJ-4520TN | Users Guide - Page 74
    Fi using the BPM, see the Brother Printer Management Tool Quick Start Guide on your model's Manuals page at support.brother.com. When the Wi-Fi Interface is connected, the Wi-Fi your system administrator, or Internet service provider. Menu Interface Wi-Fi Status Configure SSID Security Password
  • Brother International TJ-4520TN | Users Guide - Page 75
    Item Status Configure SSID Security Password Description Check the Wi-Fi IP address and Mac address setting status. DHCP: Enable (On) or disable (Off) the Dynamic Host Configuration Protocol (DHCP) network protocol. Static IP: Set the printer's IP address, subnet mask, and gateway. Set the SSID (
  • Brother International TJ-4520TN | Users Guide - Page 76
    7.3.4 Bluetooth Settings Note To use Bluetooth, the optional WLAN / BT Interface (PA-WB-001) is required. Configure your printer's Bluetooth connection, check its status, and reset the local name. Enable the Bluetooth feature to allow your mobile device to discover and connect your printer. Menu
  • Brother International TJ-4520TN | Users Guide - Page 77
    7.4 Advanced Settings Menu Advanced Language Printer Information Initialization Display Brightness Touchscreen Calibration Date & Time Security Ribbon Low Warning Print Head Maintn Key Sound Contact Us Date Format Date Time Format Time Menu Lock Menu Password Favorites Lock Favorites Password
  • Brother International TJ-4520TN | Users Guide - Page 78
    default setting is 1 km. Key Sound Contact Us Enable or disable the button press sound. Displays a QR code to access the Brother Support website at support.brother.com using a mobile device. 7.5 File Manager Check the printer's available memory, show the files list, delete the files, or run the
  • Brother International TJ-4520TN | Users Guide - Page 79
    7.6 Diagnostic Functions Menu Diagnostic Print Config. Dump Mode Print Head Display Sensor Diag Gap Diag Black Mark Diag Ribbon End Item Print Config. Description Print the current printer configuration. On the configuration printout, there is a Print Head test pattern, which is useful for
  • Brother International TJ-4520TN | Users Guide - Page 80
    this tool, you can also review your printer's status and settings to troubleshoot any problems. 8.1 Start the BPM Double-click the BPM icon to start the Manager For more information, see the Brother Printer Management Tool Quick Start Guide on your model's Manuals page at support.brother.com. 76
  • Brother International TJ-4520TN | Users Guide - Page 81
    8.2 Auto-Calibrating the Media Sensor using the BPM Use the BPM to set the media sensor type (Gap Sensor or Black Mark Sensor) and calibrate the selected sensor. Gap Sensor Black Mark Sensor The Gap Sensor (transmissive sensor) detects the beginning of the label and the printer feeds the label to
  • Brother International TJ-4520TN | Users Guide - Page 82
    9. Product Specifications LCD LED Print Method Maximum Print Width Maximum Print Length Maximum Print Speed Print Resolution Display (TJ-4420TN, TJ-4520TN, TJ-4620TN) 320 px × 240 px, 3.5" color TFT display (TJ-4422TN, TJ-4522TN) 16-bit color, 480 px × 272 px, with backlight, Resistive Touchscreen
  • Brother International TJ-4520TN | Users Guide - Page 83
    Dimensions Weight USB Serial Wired LAN USB Host Port Bluetooth (Optional) Bluetooth Wi-Fi (Optional) Wi-Fi Security Temperature Humidity Power Supply Size (TJ-4420TN/TJ-4520TN/TJ-4620TN) 276 mm (W) × 326 mm (H) × 502 mm (D) (TJ-4422TN/TJ-4522TN) 276 mm (W) × 412 mm (H) × 502 mm (D) (TJ-4420TN/TJ-
  • Brother International TJ-4520TN | Users Guide - Page 84
    digit, Code93, EAN13, EAN8, UPCA, UPCE, EAN and UPC 2 (5) digits add-on, Codabar, Postnet, MSI, MSI with check digit, Supported Barcodes PLESSEY, China post, ITF14, Code11, TELEPEN, TELEPENN, PLANET, Code49, Deutsche Post Identcode, Deutsche Post Leitcode, LOGMARS, Standard 2 of 5, Industrial
  • Brother International TJ-4520TN | Users Guide - Page 85
    9.1 Recommended microSD Cards microSD Card Class Capacity V2.0 Class 4 4 GB 8 GB V3.0 Class 10 UHS-I V3.0 Class 10 V2.0 Class 4 16 GB 32 GB 16 GB 16 GB Approved Manufacturer Transcend Transcend Transcend Sandisk Transcend Kingston Sandisk Note  Make sure your microSD card uses the DOS FAT
  • Brother International TJ-4520TN | Users Guide - Page 86
    tasks correctly. If you still have problems, contact the product manufacturer's customer service or your local dealer. Problem The LED Indicator is not lit. microSD card. Insert the microSD card again. For the supported microSD card specification and the approved microSD card manufacturers, see
  • Brother International TJ-4520TN | Users Guide - Page 87
    Problem Possible Cause Solution Poor Print Quality. Incomplete printing on the Label Guide to the right. The label size is not specified Check if the label size is set up correctly. correctly. The sensor sensitivity is not set correctly. Calibrate the Gap Sensor either manually or
  • Brother International TJ-4520TN | Users Guide - Page 88
    . Possible Cause Solution The media is not fed correctly. Make sure the Front Label Guide touches the edge of the Media Guide Tips. The coin battery has dislodged. Contact the product manufacturer's customer service or your local dealer. The coin battery has finished. The label size is set
  • Brother International TJ-4520TN | Users Guide - Page 89
    10.2 Error Messages When an error occurs, the screen displays the appropriate error message. Error Message Carriage Open No Ribbon No Paper Paper Jam Take Label Possible Cause The Print Head is open. Solution Close the Print Head. The ribbon has finished. Install a new ribbon roll. To install a
  • Brother International TJ-4520TN | Users Guide - Page 90
    11. Maintenance We recommend cleaning your printer on a regular basis to maintain its correct performance. Recommended cleaning materials: • Cotton swab • Lint-free cloth • Vacuum / Blower brush • Compressed air • Isopropyl alcohol or ethanol Printer Part Cleaning Method Interval 1. Turn the
  • Brother International TJ-4520TN | Users Guide - Page 91
    Note  Do not touch the Print Head. If you have touched it, clean it as described above.  Do not use medical alcohol as it may damage the Print Head. Use isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.  To maintain correct performance, we recommend
  • Brother International TJ-4520TN | Users Guide - Page 92
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
User's Guide TJ-4420TN/TJ-4520TN/TJ-4620TN/TJ-4422TN/TJ-4522TN
TJ-4420TN/TJ-4520TN/TJ-4620TN
TJ-4422TN/TJ-4522TN
User's Guide (English)
© 2020 Brother Industries, Ltd. All rights reserved.
Version 01
ENG