Canon 0080B002 User Manual

Canon 0080B002 Manual

Get Canon 0080B002 PDF manuals and user guides View all Canon 0080B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 0080B002 manual content summary:

  • Canon 0080B002 | User Manual - Page 1
    Document Scanner User's Guide Please read this manual before using this unit. After you finish reading this manual, keep it in a safe place for future reference.
  • Canon 0080B002 | User Manual - Page 2
    , uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no be provided for the safety regulations in each sales region of the Document Scanner. DR-2580C: Model M11052 i
  • Canon 0080B002 | User Manual - Page 3
    maintaining or helping you to use the SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND DISCLAIMER OF INDEMNITY: Canon, Canon's affiliate, their distributor or dealer will not guarantee uninterrupted service, or absence or correction of errors
  • Canon 0080B002 | User Manual - Page 4
    The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations. Trademarks • Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be
  • Canon 0080B002 | User Manual - Page 5
    reference. Manuals for the Scanner The DR-2580C Scanner has an Easy Start Guide and a User's Guide (this manual) included in the package, and a CapturePerfect 3.0 Operation Guide and Online Help. For details on checking the packing list, software installation, computer connections, and scanner setup
  • Canon 0080B002 | User Manual - Page 6
    The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To
  • Canon 0080B002 | User Manual - Page 7
    Contents INTRODUCTION 1 Manuals for the Scanner 1 Symbols Used in This Manual 2 Chapter 1 Before Using the Scanner 5 1. Important Safety Instructions 6 Installation Location 6 Power 7 Moving the Scanner 7 Handling 8 Disposal 9 2. Features of the DR-2580C Document Scanner 10 3. Names
  • Canon 0080B002 | User Manual - Page 8
    Removing and Attaching the Retard Roller 83 3. Troubleshooting 87 The Scanner Does Not Turn ON 87 The Scanner Is Not Recognized 87 Scanning Is Not Performed Are Not as Expected 91 The Flatbed Scanner (Option) Does Not Work 92 4. Uninstalling Software 94 Uninstalling the ISIS/TWAIN Driver/Job
  • Canon 0080B002 | User Manual - Page 9
    Chapter 1 Before Using the Scanner 1. Important Safety Instructions 6 Installation Location 6 Power 7 Moving the Scanner 7 Handling 8 Disposal 9 2. Features of the DR-2580C Document Scanner 10 3. Names and Functions of Parts .......... 12 4. Installation Requirements 14 5. About the Setup
  • Canon 0080B002 | User Manual - Page 10
    Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is
  • Canon 0080B002 | User Manual - Page 11
    frequency Canon dealer or service representative for further information. Moving the Scanner • When moving the scanner scanner unit installed. With Optional Flatbed Scanner Unit Installed • Make sure that the flatbed scanner unit is correctly attached to the DR-2580C scanner before moving the scanner
  • Canon 0080B002 | User Manual - Page 12
    turn the power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. • Before moving the scanner, be sure to turn the power switch OFF, and disconnect the power plug from the power outlet
  • Canon 0080B002 | User Manual - Page 13
    power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. • Do not locate the scanner in a humid or dusty location. Doing so might cause fire or electric shock. • Do not place objects
  • Canon 0080B002 | User Manual - Page 14
    . „ Waiting Time Is "0" The DR-2580C is ready to scan after the power is turned ON without a waiting time. „ Color/Grayscale Support Documents can be scanned in 24-bit color or 256-level grayscale. „ Supports a Variety of Scanning Modes The scanner supports the following scanning modes, depending on
  • Canon 0080B002 | User Manual - Page 15
    performs the specified process (save, print, mail attachment). (See p. 36.) „ Flatbed Scanner Unit (Option) The flatbed scanner unit can be attached to and used with the DR-2580C scanner. Contact your local authorized Canon dealer for more detailed information. (See p. 54.) „ Energy Saving Mode This
  • Canon 0080B002 | User Manual - Page 16
    Tool. (See p. 36.) Power Indicator This indicator lights when the scanner is turned ON. Feed Selection Lever Use it to change the way 71.) Document Eject Tray Extension Open when reading a document. (See p. 23.) Document Guides Adjust them to align with the width of the document. (See p. 21 and
  • Canon 0080B002 | User Manual - Page 17
    the bundled AC adaptor. Power Switch This switch is used to turn the scanner ON. Option Connector Interface connector for the optional flatbed scanner unit. USB Connector Connect the USB cable provided or one that supports Hi-Speed USB 2.0. (See p. 14.) CAUTION Do not touch the connector's pins
  • Canon 0080B002 | User Manual - Page 18
    the DR-2580C, Contact your local authorized Canon dealer or service representative for more detailed Canon dealer for more detailed information. • Scanning speeds are lower if your computer's standard USB interface is USB Full-Speed (equal to USB 1.1). • Use the USB cable provided with the scanner
  • Canon 0080B002 | User Manual - Page 19
    Chapter 1 • The ISIS/TWAIN Drivers provided with the scanner do not necessarily operate on all ISIS- or TWAIN-compatible applications. For details, contact your application software retailer. Before Using the Scanner 15
  • Canon 0080B002 | User Manual - Page 20
    compatible application developed for Canon document scanners. Note • The following shows how the DR-2580C setup disc is configured. For instructions on how to install the software included on the setup disc, see the Easy Start Guide. Menu screen Typical Installation Read the manual * All of the
  • Canon 0080B002 | User Manual - Page 21
    a Paper Jam 46 6. Other Functions 49 Scanning Folio (Folded Document 49 Double Feed Detection Function 50 Long Document Mode 50 Flatbed Scanner Unit (Option 54 7. Scanning Hints 55 8. Software Settings 61 ISIS Driver Settings 62 TWAIN Driver Settings 64 Job Registration Tool Settings 66
  • Canon 0080B002 | User Manual - Page 22
    p. 22. (*2) If the document is longer than 11.7" (297 mm), use the bypass mode with feed selection lever for document scanning. (See p. 28.) (*3) When the scanner is set to Long Document mode it can scan documents on paper that is up to 1,000 mm long. See "Long Document Mode," on p. 50
  • Canon 0080B002 | User Manual - Page 23
    tray and become jammed in the scanner. • Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink may show through. Adjust the scanning intensity in the application software before scanning the document. • Scanning the following types of documents
  • Canon 0080B002 | User Manual - Page 24
    paper size and feed/eject method. Setting Up the Document Feed Tray Pull the document feed tray towards you to open it. Setting the Document Guide Adapters If scanned documents are skewed or to scan folios or documents on extra-long paper, install the document
  • Canon 0080B002 | User Manual - Page 25
    far as they will go, until they click into place. 3. Carefully close the upper unit. Document Guide Adapter Document Guide IMPORTANT Do not force the upper unit to close. Doing so can damage the scanner. 4. Be sure that the upper unit is completely closed by pushing on both edges with both hands
  • Canon 0080B002 | User Manual - Page 26
    first. Using undue force when removing the document guide adaptors can damage the document tray. Document Eject Tray The scanner has two eject methods: documents can be ejected to the front of the scanner in a U-Turn path, or to the back of the scanner in a Straight Path. The eject method can be
  • Canon 0080B002 | User Manual - Page 27
    than documents on the document eject tray extension. Doing so can damage it. • Make sure the document eject tray extension is open when using the scanner. If the document eject tray extension is not opened, ejected documents can fall from the tray and become jammed in the
  • Canon 0080B002 | User Manual - Page 28
    documents are stacked in reverse order to how they were fed. IMPORTANT • Be sure there is enough space for documents that are ejected behind the scanner when using the straight path. If there is not enough space for ejected documents, the documents may be damaged or a paper jam may occur. • Switch
  • Canon 0080B002 | User Manual - Page 29
    extra careful of neckties and long hair. If anything becomes caught in the scanner, immediately disconnect the power cord to stop scanning. • Always smooth out any folds or curls in your documents before placing them into the feeder. If the leading edge of a document is curled, it may cause a paper
  • Canon 0080B002 | User Manual - Page 30
    align them. Doing so may cause a malfunction. • Be careful when placing a document in the scanner. It is possible to cut your hand on the edge of a sheet of paper. 3. Set the document guides so they are wider than the document to be scanned. IMPORTANT Do not hold the tips of the document
  • Canon 0080B002 | User Manual - Page 31
    (80 g/m2) paper). Doing so may cause a paper jam. 5. Adjust the document guides so they match the width of the document. Note Before starting a scan, make sure that the document is loaded in the scanner correctly. Scanning a curled document or a creased document can damage the document. 6. Start
  • Canon 0080B002 | User Manual - Page 32
    feed operation stops due to a system error or a paper jam while the scanner is scanning, resolve the problem, make sure that the scanned image of the last page that was fed the stoppers, and adjust the position of the document guides. 3. Start scanning from the application. 28 Using the Scanner
  • Canon 0080B002 | User Manual - Page 33
    Chapter 2 4. The document is pushed against the document feed slot and is fed into the scanner. IMPORTANT • When scanning documents that are fastened together, such as invoices, set the edge that is fastened together as the leading edge. • Note that when
  • Canon 0080B002 | User Manual - Page 34
    documents using the DR-2580C document scanner. You can Guide. Using CapturePerfect 3.0 CapturePerfect 3.0 is an ISIS-compatible application developed for Canon document scanners specified printer. • Scan Batch to Mail Documents are scanned with the preset scanning conditions, the e-mail software is
  • Canon 0080B002 | User Manual - Page 35
    image is displayed at full size on the screen. DR-2580C Projector The scanned image is projected on the screen. Scan to Presentation Mode Note For instructions on how to use CapturePerfect 3.0, see the CapturePerfect 3.0 operation guide and CapturePerfect Help. Be sure to read the CapturePerfect
  • Canon 0080B002 | User Manual - Page 36
    Operation Procedure This section describes how to start up CapturePerfect 3.0, select the scanner, and the procedure up to scanning with Scan Batch to File. For details, see the CapturePerfect 3.0 Operation Guide and CapturePerfect Help. 1. Click the Windows [Start] button, and then click [Programs
  • Canon 0080B002 | User Manual - Page 37
    [Scan] menu, click [Select Scanner]. Chapter 2 2. Select [CANON DR-2580C] Æ click the [OK] button. Note If [CANON DR-2580C] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver. (See "Step 3. Installing the Software" in the Easy Start Guide.) 3. Set the "Default Page Size
  • Canon 0080B002 | User Manual - Page 38
    3. On the [Scan] menu, click [Scanner Setting]. ISIS driver basic setup dialog box opens. 4. Set the scan settings. For details setting the scanning settings, see "ISIS Driver Settings," on p. 62, and
  • Canon 0080B002 | User Manual - Page 39
    Scan Batch to File Setting] dialog box, see the CapturePerfect 3.0 operation guide and CapturePerfect Help. 8. When there are no more pages of the . Scanning resumes or ends according to the "Feeding Option" setting in the scanner setup. • When "Feeding Option" is set to [Standard Feeding] The
  • Canon 0080B002 | User Manual - Page 40
    to [Automatic Feeding] Place the next document. Scanning resumes when the scanner detects the document. Or, click the Job Button (stop) to end Function, which is used to assign an arbitrary job to a Job Button on the scanner, allows you to assign a job that is executed when the Job Button is pressed
  • Canon 0080B002 | User Manual - Page 41
    "About Job Registration Tool," on p. 38.) Print Image files are printed on a specified printer. Save as file Image files are saved to a specified folder. (network) Job button DR-2580C Attach to E-mail E-mail software is started up and image files are attached to a new e-mail massage. Launcher
  • Canon 0080B002 | User Manual - Page 42
    the My Pictures folder. • To start up the Job Registration Tool, click the Windows [Start] button, and then click [Programs] ([All Programs] for Windows XP) Æ [DR-2580C] Æ [Job Registration Tool]. 38 Using the Scanner
  • Canon 0080B002 | User Manual - Page 43
    Chapter 2 • Describe the jobs that you register with the Job Registration Tool on the job labels provided and stick them on the scanner. Job label Executing scanning with the Job Function 1. Place the document. (See "Placing Documents," on p. 25.) 2. Push the Job button to start a job. The "Monitor
  • Canon 0080B002 | User Manual - Page 44
    • Depending on the application, it may not operate normally with the [Launcher]. • In the initial status of the DR-2580C immediately after setup, all the applications the event function supported are enabled. At this point, if no event settings are changed, the following dialog box is displayed when
  • Canon 0080B002 | User Manual - Page 45
    , click the [Start] button Æ click [Control Panel].) Chapter 2 2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category view) Printers and Other Hardware Control Panel (classic view) Using the Scanner 41
  • Canon 0080B002 | User Manual - Page 46
    3. Double-click [Scanners and Cameras]. 4. Select [CANON DR-2580C USB], and then click [Properties]. 42 Using the Scanner
  • Canon 0080B002 | User Manual - Page 47
    Chapter 2 [Canon DR-2580C USB Properties] is displayed. 5. Click the [Events] tab. Using the Scanner 43
  • Canon 0080B002 | User Manual - Page 48
    Job Button (Button No.1, Button No.2, or Button No.3) whose settings were changed with the scanner event. 3. In the initial status, all the applications displaying [Send to this application] are checked [Disable device events] checkbox is checked. Do not check this checkbox. 44 Using the Scanner
  • Canon 0080B002 | User Manual - Page 49
    4. Click [OK] to close [CANON DR-2580C USB Properties]. 5. Restart Windows to enable the new settings for the event function. Chapter 2 Using the Scanner 45
  • Canon 0080B002 | User Manual - Page 50
    force the document eject tray extension closed can crease the document. 3. Press on both sides of the back cover to open it. 46 Using the Scanner
  • Canon 0080B002 | User Manual - Page 51
    sure to pull the document out carefully, without applying too much force. Should the document tear, be sure to remove any part remaining in the scanner. 6. Close the upper unit slowly. IMPORTANT Do not force the upper unit to close. Doing so may damage the
  • Canon 0080B002 | User Manual - Page 52
    side is closed. Note After removing the jammed paper, check to see if the last page was scanned, and then continue scanning. 48 Using the Scanner
  • Canon 0080B002 | User Manual - Page 53
    scanner also supports the scanning functions described below. Scanning Folio (Folded Document P. 49 Double Feed Detection Function P. 50 Long Document Mode P. 50 Flatbed Scanner Unit (Option P. 54 Scanning Folio (Folded Document) The scanner Attach the document guide adaptors to prevent
  • Canon 0080B002 | User Manual - Page 54
    documents are stuck together with static electricity, the ultrasonic double feed detection will not correctly detect them as a double feed. Long Document Mode Normally the scanner can scan documents up to 13.97" (355 mm) in length, however if you change the settings to the Long Document mode it is
  • Canon 0080B002 | User Manual - Page 55
    Windows XP, click the [Start] button Æ click [Control Panel].) 2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category view) Printers and Other Hardware Control Panel (classic view) Using the Scanner 51
  • Canon 0080B002 | User Manual - Page 56
    3. Double-click [Scanners and Cameras]. 4. Select [CANON DR-2580C USB], and then click [Properties]. 52 Using the Scanner
  • Canon 0080B002 | User Manual - Page 57
    Chapter 2 [CANON DR-2580C USB Properties] is displayed. 2. Click the [Maintenance] tab. Using the Scanner 53
  • Canon 0080B002 | User Manual - Page 58
    cannot pass through the feeder without having to change the scanner or applications. Half Size Flatbed scanner unit (connected to the DR-2580C) Note The flatbed scanner unit cannot operate in a stand-alone configuration. Contact your local authrized Canon dealer or service representative for more
  • Canon 0080B002 | User Manual - Page 59
    Hints This section describes helpful hints for setting up and using your scanner. Refer to these hints when you set up the ISIS/TWAIN driver. For more details on items not described in this section, see "Software Settings," on p. 61. Scanning Double-sided Documents • I want to scan a double-sided
  • Canon 0080B002 | User Manual - Page 60
    Settings h," on p. 64. • I want scanning to stop if two or more pages of the document are fed together. Enable the double feed detection function. The scanner stops feeding the document if it detects that two pages of the document have been fed at the same time. See "ISIS Driver Settings o," on
  • Canon 0080B002 | User Manual - Page 61
    If a low [Ratio of black pixels] value is set, blank sheets are sometimes not skipped due to the background color or dirt on the document. • Documents full of text are skipped as blank sheets. Set a lower [Ratio of a text document is skipped, adjust the slider to the right. Using the Scanner 57
  • Canon 0080B002 | User Manual - Page 62
    rotation (0°, 90°, 180°, 270°) in [Document Orientation]. The image is rotated as noted below depending on how the document is placed. Feeder, document: face up Flatbed, document: face down Document Orientation (clockwise) 0° 90° 180° 270° Output image See "ISIS Driver Settings o," on p. 62
  • Canon 0080B002 | User Manual - Page 63
    on the document Check the [Text Orientation Recognition] checkbox. The scanner detects the orientation of the text in the document and rotates the q," on p. 64. • I want to skip specific colors Specify the color to skip during scanning in [Color drop-out]. See "ISIS Driver Settings u," on p. 62
  • Canon 0080B002 | User Manual - Page 64
    ] and [Auto] do not appear in the "Scanning Side" settings. See "ISIS Driver Settings g," on p. 62, and "TWAIN Driver Settings g," on p. 64. 60 Using the Scanner
  • Canon 0080B002 | User Manual - Page 65
    Chapter 2 8. Software Settings This section describes the setting items when setting the ISIS file that contains this User's Guide, which is on the setup disc, has a "Quick Guide" that has the same information as this section. Print it out and keep it near the scanner where it can be easily used
  • Canon 0080B002 | User Manual - Page 66
    Settings Dialog Box s t u The optional BarCode module is enabled when it is installed, to detect bar codes in documents open the BarCode dialog box. Opens the Gamma Settings dialog box , but Page Size [Auto-detection] may not function normally. v w Color drop-out 62 Using the Scanner
  • Canon 0080B002 | User Manual - Page 67
    Folded Document)" (See p. 49.) in the user's guide. ) [Ratio of black pixels] specifies the ratio of Settings Dialog Box o Double Feed Detection The scanner stops feeding when it detects that two or images. u Color drop-out Enabled for all scanning modes except [24 bit Color], this function selects
  • Canon 0080B002 | User Manual - Page 68
    Settings Dialog Box s t u The optional BarCode module is enabled when it is installed, to detect bar codes in documents open the BarCode dialog box. Opens the Gamma Settings dialog automatically, but Page Size [Auto-detection] may not function normally. v w Color drop-out 64 Using the Scanner
  • Canon 0080B002 | User Manual - Page 69
    Folded Document)" (See p. 49.) in the user's guide. ) [Ratio of black pixels] specifies the ratio of Settings Dialog Box n Double Feed Detection The scanner stops feeding when it detects that two or more images. u Color drop-out Enabled for all scanning modes except [24 bit Color], this function
  • Canon 0080B002 | User Manual - Page 70
    Dialog Box t u v w x Monitor for DR2580C Function PDF/TIFF Settings p q Print m Attach to E-mail r s Stop o Launcher n Start No Scan Job Language for OCR 66 Using the Scanner
  • Canon 0080B002 | User Manual - Page 71
    , follow the displayed instructions to continue scanning. Guide describes settings for the Job Registration Tool. Click the Help button for details. x Job Backup/Restore Backs up and restores registered jobs. ) Backup files can be restored on another DR-2580C document scanner. Using the Scanner
  • Canon 0080B002 | User Manual - Page 72
    68 Using the Scanner
  • Canon 0080B002 | User Manual - Page 73
    Removing and Attaching the Retard Roller 83 3. Troubleshooting 87 The Scanner Does Not Turn ON 87 The Scanner Is Not Recognized 87 Scanning Is Not Performed Not as Expected .... 91 The Flatbed Scanner (Option) Does Not Work 92 4. Uninstalling Software 94 Uninstalling the ISIS/TWAIN Driver/
  • Canon 0080B002 | User Manual - Page 74
    use a dry, soft cloth to wipe away any moisture. Cleaning the feed path Dust or paper particles in the document feed opening or inside the scanner can cause lines in scanned images. Use a blower to periodically clean dust and paper particles from the document feed opening and the inside of the
  • Canon 0080B002 | User Manual - Page 75
    , and the Rollers If scanned images have extraneous marks, or if the scanned documents are dirty, then the sensor glass or rollers inside the scanner may be dirty. Clean them periodically. 1. Pressing the OPEN knob from both sides, raise the upper unit. Chapter 3 Note • The location of the sensor
  • Canon 0080B002 | User Manual - Page 76
    scanner. Precision mechanisms, such as the light source, may get wet which will cause a malfunction. IMPORTANT Scratches on the sensor glass may cause marks on the images and could cause feeding errors. If there are scratches on the sensor glass, contact your local authorized Canon dealer or service
  • Canon 0080B002 | User Manual - Page 77
    Attaching the Feed Roller," on p. 79.) 9. Close the upper unit slowly. IMPORTANT Do not force the upper unit to close. Doing so may damage the scanner. 10. Be sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click. Appendices 73
  • Canon 0080B002 | User Manual - Page 78
    before the message is displayed. • Be sure to reset the counter after replacing the rollers. (See "Resetting the Counter," on p. 75.) • Contact your local authrized Canon dealer or service representative for information about the exchange roller kit (roller unit and retard roller). 74 Appendices
  • Canon 0080B002 | User Manual - Page 79
    [Control Panel]. (For Windows XP, click the [Start] button Æ click [Control Panel].) Chapter 3 2. For Windows XP, switch the Control Panel to Classic View, or select [Printers and Other Hardware] in the working field. Control Panel (category view
  • Canon 0080B002 | User Manual - Page 80
    3. Double-click [Scanners and Cameras]. 4. Select [CANON DR-2580C USB], and then click [Properties]. 76 Appendices
  • Canon 0080B002 | User Manual - Page 81
    [Canon DR-2580C USB Properties] is displayed. 2. Click the [Maintenance] tab. Chapter 3 Appendices 77
  • Canon 0080B002 | User Manual - Page 82
    3. Click the [Reset] button, and then make sure that the counter for the roller being used is set to 0. 78 Appendices
  • Canon 0080B002 | User Manual - Page 83
    Chapter 3 Removing and Attaching the Feed Roller Follow the procedure below to remove and attach the roller unit for cleaning or replacement. Note When attaching the roller unit during installation, operate the roller fastening lever according to the removal procedure and then attach the roller
  • Canon 0080B002 | User Manual - Page 84
    3. Supporting the roller unit with your hand, slide the roller lock lever to the right. 4. Lower the roller unit. 5. First detach the right side of the roller unit (a), and then remove the roller unit (b). 80 Appendices
  • Canon 0080B002 | User Manual - Page 85
    Chapter 3 Attaching the Roller Unit 1. Set the roller unit onto the scanner's shaft. 2. Insert the protrusion of the roller unit into the groove in the scanner, and then lift the roller unit. 3. Slide the roller lock lever to the left. Appendices 81
  • Canon 0080B002 | User Manual - Page 86
    4. Push the roller lock lever towards the back of the scanner to lock the roller unit in place. 5. Close the upper unit slowly. IMPORTANT Do not force the upper unit to close. Doing so may damage the scanner. 6. Be sure that the upper unit is completely closed by pushing on both edges with
  • Canon 0080B002 | User Manual - Page 87
    Chapter 3 Removing and Attaching the Retard Roller Follow the procedure below to remove and attach the retard roller for cleaning or replacement. Note When attaching the retard roller during installation, operate the roller fastening lever according to the removal procedure and then attach the
  • Canon 0080B002 | User Manual - Page 88
    3. Move the roller lock lever upward (a), and then slide it to the right (b). 4. Shift the retard roller to the right to remove it. Attaching the Retard Roller 1. Position the retard roller so the notch in the roller is facing the scanner's shaft. 84 Appendices
  • Canon 0080B002 | User Manual - Page 89
    Chapter 3 2. Slide the roller lock lever to the left, and insert it into the retard roller hole. 3. Push the roller lock lever towards the back of the scanner to lock the retard roller in place. 4. Attach the roller cover. 5. Close the upper unit slowly. Appendices 85
  • Canon 0080B002 | User Manual - Page 90
    IMPORTANT Do not force the upper unit to close. Doing so may damage the scanner. 6. Be sure that the upper unit is completely closed by pushing on both edges with both hands until you hear a click. 86 Appendices
  • Canon 0080B002 | User Manual - Page 91
    Not Work P. 92 If, after consulting this section, you still cannot resolve the problem, contact your local authorized Canon dealer or your service representative. The Scanner Does Not Turn ON Check the following if the scanner does not turn on: • Is the power cord connected correctly? • Is the
  • Canon 0080B002 | User Manual - Page 92
    operate with all types of USB interfaces. Contact your local authorized Canon dealer or service representative for more information. (See p. 14.) Problem The scanner does not support the USB cable. Solution Use the USB cable provided with the scanner. Problem The USB hub is not compatible with the
  • Canon 0080B002 | User Manual - Page 93
    space on the hard disk. Delete unwanted files on the hard disk to increase free space on the hard disk. Problem Solution The USB port you are using does not support Hi-Speed USB 2.0. Scanning speeds are lower if your computer's standard USB interface is not compatible with Hi-Speed USB 2.0. (See
  • Canon 0080B002 | User Manual - Page 94
    cleaning does not appear to improve them. Contact your local authorized Canon dealer and buy a roller replacement kit and then replace the Problem The application you are using to open the TIFF file does not support multi-page TIFF files. Solution Open the file with an application that supports
  • Canon 0080B002 | User Manual - Page 95
    Paper size] to [Auto-detection]. Or, set [Border Removal] to on. Symptoms The scanned image is skewed. Problem The document has been fed at an angle. (skew) Solution Use the document guide adapter to prevent document skew, and set [Deskew] to on. (See "Software Settings," on p. 61.) Appendices 91
  • Canon 0080B002 | User Manual - Page 96
    interface connector is not connected. Check the connections between the DR-2580C and the flatbed scanner unit. Problem Solution The DR-2580C is not installed correctly. Check the document size, thickness, and paper type. Remove the DR-2580C scanner and then reinstall it correctly. 92 Appendices
  • Canon 0080B002 | User Manual - Page 97
    Remove the DR-2580C scanner and then reinstall it correctly. Problem Solution The DR-2580C scanner was installed without removing the transport locks. Remove the DR-2580C scanner and remove the transport locks. For information about removing the flatbed scanner unit, see the manual that comes
  • Canon 0080B002 | User Manual - Page 98
    3.0" are not operating normally, follow the procedure below to uninstall them. Then, re-install the software from the DR-2580C setup disc. (See "Step 3. Installing the Software," in the Easy Start Guide.) IMPORTANT Be sure to log on as an administrator when using Windows 2000 Professional or Windows
  • Canon 0080B002 | User Manual - Page 99
    Chapter 3 The [Add/Remove Programs Properties] dialog box appears. Note For Windows XP, the [Add or Remove Programs] dialog box appears. 3. From the list in the dialog box, select the application you want to delete Æ click [Change/Remove]. For more information on uninstalling each application, see
  • Canon 0080B002 | User Manual - Page 100
    Uninstalling the ISIS/TWAIN Driver/Job Registration Tool 1. From the Programs list in the dialog box, select [Canon DR-2580C Scanner Driver] (or [DR-2580C Job Tool]) Æ click the [Change/Remove] button. 2. The [Confirm File Deletion] screen appears. Click the [Yes] button. The [Remove Shared File ?]
  • Canon 0080B002 | User Manual - Page 101
    4. Click the [Yes] button to start the uninstallation. Note All deleted shared files can be reinstalled by installing the software again. 5. After uninstall is complete, click the [OK] button to exit the uninstaller. Chapter 3 Appendices 97
  • Canon 0080B002 | User Manual - Page 102
    Uninstalling CapturePerfect 3.0 1. Select [CapturePerfect 3.0] from the list in the dialog box Æ click the [Remove] button. 2. The file delete confirmation screen appears. Click the [Yes] button. Uninstallation starts. 98 Appendices
  • Canon 0080B002 | User Manual - Page 103
    3. After uninstallation is complete, click the [Finish] button to exit the uninstaller. Chapter 3 Appendices 99
  • Canon 0080B002 | User Manual - Page 104
    Scanner Type Desktop sheetfed scanner 42 to 157 g/m2 (0.05 mm to 0.2 mm) Business cards are supported (excluding embossed cards). Size: 2.12" × 3.37" (53.9 mm × text enhancement, Error diffusion, 256-level grayscale, 24 bit color Scanning Resolution (Primary Scan Lines × Secondary Scan Lines)
  • Canon 0080B002 | User Manual - Page 105
    Gray 24-bit Color Amount of paper that can be stacked in automatic feeder Interface Other Functions × H) Approximately 4.2 lb (1.9 kg) 12.6 lb (5.7 kg) with flatbed scanner unit DC16 V 1.4 A Maximum power: 19 W 23.4 W (with flatbed scanner unit) Low power mode: 4 W Power SW OFF: 0.5 W Not more
  • Canon 0080B002 | User Manual - Page 106
    scanner unit HS (Product code: 0106B003) Flatbed scanner unit HS that is used by connecting it to the DR-2580C. (See p. 54.) Bar code module (product code: 1922B001) Additional software to allow the ISIS/TWAIN driver to recognize bar codes. • Contact your local authorizde Canon dealer or service
  • Canon 0080B002 | User Manual - Page 107
    11.9" (302 mm) (Excluding protrusions) 9.6" (245 mm) Chapter 3 External Dimensions 6.7" (171 mm) 10.1" (256 mm) (Document Eject Tray Extension is open) 8.6" (218 mm) Appendices 103 3.2" (81 mm) 5.2" (133 mm)
  • Canon 0080B002 | User Manual - Page 108
    Unit 71 Rollers 71 Scanner 70 Sensor Glass 71 Shading Boards 71 Removing Retard Roller 83 Roller Unit 79 Resetting the Counter 75 Roller Replacement Cycle 74 S Scanning Folio 49 Scanning Hints 55 Setup Disc 16 CapturePerfect 3.0 16 DR-2580C Driver 16 Software Settings 61 ISIS Driver
  • Canon 0080B002 | User Manual - Page 109
    Index Stopper 27 Straight Path 24 T Troubleshooting 87 U Uninstalling 94 CapturePerfect 3.0 98 ISIS/TWAIN Driver 96 Job Registration Tool 96 USB Connector 13 U-Turn Path 23 Index 105
  • Canon 0080B002 | User Manual - Page 110
    INC. 1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPAN CANON U.S.A. INC. ONE CANON PLAZA, LAKE SUCCESS, N.Y. 11042, U.S.A. CANON CANADA INC. 6390 DIXIE ROAD, MISSISSAUGA, ONTARIO L5T 1P7, CANADA CANON EUROPA N.V. BOVENKERKERWEG 59-61, P.O.BOX 2262, 1180 EG AMSTELVEEN, THE NETHERLANDS
  • Canon 0080B002 | User Manual - Page 111
    ISIS Driver Quick Guide Keep this Quick Guide near the scanner for ready reference. Basic Dialog Box The optional BarCode module is enabled when it is installed, to detect bar codes in documents open the BarCode dialog box. Opens the [Auto-detection] may not function normally. Color drop-out
  • Canon 0080B002 | User Manual - Page 112
    ISIS Driver Quick Guide Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 User . J Edge emphasis Enhances contours in scanned images. K Color drop-out Enabled for all scanning modes except [24 bit Color], this function selects skipping (drop-out) or enhancement of
  • Canon 0080B002 | User Manual - Page 113
    TWAIN Driver Quick Guide Keep this Quick Guide near the scanner for ready reference. Basic Dialog Box The optional BarCode module is enabled when it is installed, to detect bar codes in documents open the BarCode dialog box. Opens the Size [Auto-detection] may not function normally. Color drop-out
  • Canon 0080B002 | User Manual - Page 114
    TWAIN Driver Quick Guide Keep this Quick Guide near the scanner for ready reference. Basic Setup Dialog Box 1 . J Edge emphasis Enhances contours in scanned images. K Color drop-out Enabled for all scanning modes except [24 bit Color], this function selects skipping (drop-out) or enhancement of
  • Canon 0080B002 | User Manual - Page 115
    Job Registration Tool Quick Guide Keep this Quick Guide near the scanner for ready reference. Job Registration Tool Dialog Box Admin Dialog Box Editing dialog box The dialog box changes according the Function selection. Save as file
  • Canon 0080B002 | User Manual - Page 116
    Printer Shows the default printer. Printer settings can be changed by clicking the [Printer 4 images, while grayscale and color images are compressed as JPEG is displayed, follow the displayed instructions to continue scanning. L Show DR-2580C document scanner. This Quick Guide describes settings for
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Document Scanner
User’s Guide
Please read this manual before using this unit. After you finish
reading this manual, keep it in a safe place for future reference.