Canon 0209B001 EOS DIGITAL Rebel XT / EOS 350D Instruction Manual
Canon 0209B001 - EOS Digital Rebel XT Manual
UPC - 013803049565
View all Canon 0209B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon 0209B001 manual content summary:
- Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 1
INSTRUCTION MANUAL E E INSTRUCTION MANUAL - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 2
purchasing a Canon product. The EOS DIGITAL REBEL XT/EOS 350D DIGITAL is a highperformance, digital AF SLR camera enabling highly versatile and speedy shooting. The camera has an 8-megapixel, high-resolution CMOS sensor, and it is compatible with all Canon EF lenses (including the EF-S lenses). The - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 3
) ¢ Pocket Guide Quick start guide to shooting. ¢ EOS DIGITAL REBEL XT/EOS 350D DIGITAL INSTRUCTION MANUAL (this booklet) ¢ Software Guide Gives an overview of the bundled software and explains the software installation procedure. ¢ Battery Pack NB-2LH Instructions ¢ Lens Instructions *Lens Kit only - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 4
Guide 10 Nomenclature 12 Conventions Used in this Manual 18 Getting Started 19 Recharging the Battery 20 Installing and Removing the Battery 22 Using a Household Power Outlet 24 Mounting and Detaching a Lens Quality 52 Setting the ISO Speed 55 Setting the White Balance 56 Custom - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 5
AE 84 Depth of Field Preview 85 Manual Exposure 86 Automatic Depth-of-Field AE EOS-Dedicated, External Speedlites 101 Using Non-Canon Flash Units 102 LCD Panel Illumination 102 7 Image Playback 6 103 Setting the Image Review DPOF: Digital Print Order Format 137 10 Customizing the Camera - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 6
not specified in this booklet. Do not use any home-made or modified batteries. - Do not short- , and clothing. It can cause blindness or skin problems. If the battery leakage contacts your eyes, skin shock. • Do not fire the flash at someone driving a car. It may cause an accident. • Do not fire the flash - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 7
Preventing Injury or Equipment Damage • Do not leave equipment inside a car under the hot sun or near a heat source. The equipment to support the camera and lens. • Do not leave a lens or lens-attached camera under the sun without the lens cap attached. Otherwise, the lens may Canon Service Center. 7 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 8
¡ Do not leave the camera in excessive heat such as in a car in direct sunlight. High temperatures can cause the camera to malfunction. that contain organic solvents to clean the camera body or lens.For stubborn dirt, take the camera to a Canon Service Center. ¡ Do not touch the camera's electrical - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 9
pixels displaying only black or red, Canon CF cards is recommended. ¡ Do not bend the card or subject it to any excessive force or physical shock. ¡ Do not store CF cards in hot, dusty, or humid locations. Lens Electrical Contacts Contacts After detaching the lens from the camera, attach the lens - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 10
Quick Start Guide 1 Insert the battery. (p.22) To recharge the battery, see page 20. 2 For EF-S lens For EF lens Attach the lens. (p.25) When attaching an EF-S lens, align it with the white dot on the camera. For other lenses, align it with the red dot. 3 Set the lens focus mode switch to < - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 11
Quick Start Guide 6 Set the Mode Dial to (Full Auto). (p.44) All the necessary camera to autofocus. 8 Take the picture. (p.28) Press the shutter button fully to take the picture. 9 Review the picture on the LCD monitor. (p.104) The captured image will be displayed for about 2 sec. on - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 12
96/74) Power switch (p.28) Main Dial (p.29) EF Lens mount index (p.25) EF-S Lens mount index (p.25) Flash-sync contacts Hot shoe (p.101) Flash button (p.96) Terminal cover Lens release button (p.25) Depth-of-field preview button (p.85) Lens lock pin Lens mount Video OUT terminal (p.114) - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 13
Access lamp (p.27) Battery compartment cover release lever (p.22) Battery compartment cover (p.22) Cross keys (p.30) ISO speed set button (p.55) White balance selection button (p.56) Metering mode selection button (p.77) AF mode selection button (p.70) Setting button (p.31 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 14
Nomenclature LCD Panel Aperture AF point selection CF card full warning (FuLL CF) CF card error warning (Err CF) No CF card warning (no CF) Error code (Err) Cleaning image sensor (CLEA n) Shutter speed Busy (buSY) Built-in flash recycling (buSY) White balance Q Auto W Daylight E Shade R Cloudy - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 15
Viewfinder Information Focusing screen Nomenclature AF point display indicator < > AF points AE lock/FE lock AEB in-progress Focus confirmation light Flash-ready Improper FE lock warning Max. Burst High-speed sync (FP flash) Flash exposure compensation Red-eye reduction - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 16
) 6 : Night Portrait (p.47) 7 : Flash Off (p.47) w Creative Zone Set the camera as you wish. d : Program AE (p.80) s : Shutter-priority AE (p.82) f : Aperture-priority AE (p.84) a : Manual exposure (p.86) 8 : Automatic Depth-offield AE (p.88) 16 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 17
Battery Charger CB-2LW This is a battery pack charger. (p.20) Battery pack slot index Battery pack slot Recharge lamp Battery Charger CB-2LWE This is a battery pack charger. (p.20) Battery pack slot Recharge lamp Nomenclature Power plug Power cord Power cord socket 17 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 18
Manual In this manual, the Instruction Manual assume that the power switch is already set to . ¡The Canon EF-S18-55mm f/3.5-5.6 ll lens is used as the sample lens in this Instruction Manual manual uses the following alert symbols: :The Caution symbol indicates a warning to prevent shooting problems - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 19
1 Getting Started This chapter explains a few preliminary steps and basic camera operations. Attaching the Strap Pass the end of the strap through the camera's strap mount from the bottom. Then pass it through the strap's buckle as shown in the illustration. Pull the strap to take up any slack and - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 20
Recharging the Battery For details on the battery, refer to the instructions for Battery Pack NB-2LH. 1 Remove the cover. Battery pack slot index 2 Attach the battery. ¡ Align the battery's front edge with the battery charger's index - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 21
is left in the camera for a prolonged period without the camera being used, a low electrical current may be discharged excessively and the battery's service life may be affected. When not using the camera, remove the battery and attach the protective cover to prevent shorting. Before using the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 22
Installing and Removing the Battery Installing the Battery Load a fully-charged Battery Pack NB-2LH into the camera. 1 Open the battery compartment cover. ¡ Slide the lever as shown by the arrow and open the cover. 2 Insert the battery. ¡ Point the battery contacts downward. ¡ Insert the battery - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 23
. ¡ Pressing the shutter button halfway for long periods or operating only the autofocus can also reduce the number of possible shots. ¡ The lens operation is powered by the camera's battery. Using certain lenses can reduce the number of possible shots. Removing the Battery 1 Open the battery - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 24
Using a Household Power Outlet With AC Adapter Kit ACK-DC20 (optional), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the power cord. ¡ Connect the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 25
arrow. EF-S lens mount index 2 Attach the lens. ¡ Align the EF-S lens with the camera's white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place. ¡ When attaching a lens other than an EF lens mount index EF-S lens, align the lens with the red EF lens index - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 26
the cover. ¡ Slide the cover as shown by the arrow to open it. Top CF card eject button Shots remaining 2 Insert the CF card. ¡ Using Canon CF cards is recommended. ¡ If the CF card is inserted in the wrong way, it may damage the camera. As shown in the illustration, face - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 27
Installing and Removing the CF Card Removing the Card Access lamp 1 Open the cover. ¡ Set the Power switch to . ¡ Check that the "buSY" message is not displayed on the LCD panel. ¡ Make sure the access lamp is off, then open the cover. 2 Remove the CF card. ¡ Press the Eject button. s The CF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 28
Basic Operation Power Switch The camera can operate only after the power switch is turned on. : The camera operates. : The camera is turned off and does not operate. Set to this position when not using the camera. ¡ To save battery power, the camera turns off automatically after 1 minute of - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 29
Basic Operation ¡ If you press the shutter button halfway and (0) elapse, you must press it halfway again and wait a moment before pressing it completely to take a picture. If you press the shutter button completely without pressing it halfway first or if you press the shutter button halfway and then - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 30
Basic Operation Operating the Cross Keys The key is mainly used for shooting-related settings and selecting LCD monitor menu items. (1) Press the key independently. With the camera ready to shoot, you can press any key to quickly use the key's respective menu function. ISO speed - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 31
Menu Operations With the menus, you can set various settings such as the image recording quality, processing parameters, the date/time, and Custom Functions. While looking at the LCD monitor, you use the button, Cross keys, and button on the camera back. button button LCD - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 32
Menu Operations Menu Setting Procedure 1 Display the menu. ¡ Press the button to display the menu. To turn off the menu, press the button again. 2 Select a tab. ¡ Press the button to select a menu tab. ¡ If the five tabs are highlighted, you can also press the keys to select a tab. 3 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 33
100 / 200 / 400 / 800 / 1600 55 Shooting 2 menu (Red) AEB 1/3-stop increments and M/G bias 1 level, ±3 levels 59 60 Custom WB Manual setting of white balance 57 Color space sRGB / Adobe RGB 62 (DPOF). 137 Auto play Auto playback of images 112 Review time Off / 2 sec. / 4 sec. / - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 34
Menu Operations Menu Settings (2) Set-up 1 menu (Yellow) Reference pages Auto power off 1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30 min. / Off 41 Auto rotate On / Off 105 LCD brightness 5 levels 106 Date/Time Setting the date/time 37 File numbering Continuous / Auto reset 67 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 35
Menu Operations Restoring the Camera's Default SettingsN 1 Select [Clear settings]. ¡ Select the [b] tab. ¡ Press the key to select [Clear settings], then press . 2 Select [Clear all camera settings]. ¡ Press the key to select [Clear all camera settings], then press . 3 Select [OK]. - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 36
3 Setting the Language The LCD monitor's interface language can be set to one of fifteen languages. 1 Select [Language]. ¡ Select the [b] tab. ¡ Press the key to select [Language], then press . s The Language screen will appear. 2 Set the desired language. ¡ Press the key to select the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 37
the key to select [Date/ Time], then press . s The date/time screen will appear. 2 Set the date and time. ¡ Press the key to select the digit, then press . ¡ The selection will then shift to the next item. 3 Set the date display format. ¡ Press the key to set the date format to - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 38
Replacing the Date/Time Battery The date/time (back-up) battery maintains the camera's date and time. The battery's service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2016 lithium battery - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 39
the image sensor is a very delicate component. If possible, you should have it cleaned by a Canon Service Center. While you clean the image sensor, the camera must be turned on. Using the AC Adapter Kit ACK-DC20 (optional, see page 158) is recommended. If you use a battery, make sure the battery - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 40
• Opening the battery compartment cover. ¡ Do not insert the blower tip inside the camera beyond the lens mount. If the power goes out, the shutter will close and the shutter curtains and image sensor may the power. Use AC Adapter Kit ACK-DC20 (optional) or use a battery having sufficient power. 40 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 41
3 Set the power-off time/Auto power off You can set the auto power-off time for the camera to turn off automatically after a set time of idle operation. If you do not want the camera to turn off automatically, set this to [Off]. If the camera turns off automatically, just press the shutter button - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 42
Horizontal shooting Vertical shooting ¡ Firmly grasp the camera grip with your right hand, and press your both elbows lightly against your body. ¡ Hold the lens bottom with your left hand. ¡ Press the camera against your face and look through the viewfinder. ¡ To maintain a stable stance, place one - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 43
2 Fully Automatic Shooting This chapter explains how to use the Basic Zone modes on the Mode Dial for quick and easy shooting. In each mode , the AF mode, metering mode, ISO speed, etc., are set automatically to suit the subject. In these modes, all you do is point and - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 44
1 Using Full Auto All you do is point the camera and press the shutter button. Everything is automatic so it is easy to photograph any subject. With seven AF points to focus the subject, anyone can easily take nice pictures. AF point 1 Set the Mode Dial to . s The AF mode will be set to , - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 45
to and again. ¡ Using a non-Canon lens with an EOS camera may not result in proper camera or lens operation. ¡ When focus is achieved, the focus Beep] menu item. (p.50) ¡ The image review time after image capture can be changed with the menu's [x Review time] setting. (p.104) ¡ If you want - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 46
' closest focusing distance as much as possible. ¡ To obtain a larger magnification, use the telephoto end of a zoom lens. ¡ For better close-ups, an EOS-dedicated macro lens and Macro Ring Lite (both optional) are recommended. s The AF mode will be set to , the drive mode will be set to , and - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 47
with any of the seven AF points covering the subject. ¡ While you press the shutter button, focusing will continue for continuous shooting. ¡ Using a telephoto lens is recommended. ¡ When focus is achieved, the beeper will sound softly. s The AF mode will be set to , the drive mode will be set - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 48
j Self-timer Operation Use the self-timer when you want to be in the picture. You can use selftimer in any Basic Zone mode or Creative Zone mode. 1 Select . ¡ Look at the LCD panel and press the button to select . 2 Focus the subject. ¡ Look in the viewfinder and press the shutter button - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 49
R Wireless Remote Control With Remote Controller RC-1 or RC-5 (optional), you can shoot remotely up to about 5 meters/16.4 ft. directly in front of the camera. 1 Select . ¡ Look at the LCD panel and press the button to select . 2 Take the picture. ¡ Point the remote controller toward the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 50
Using the Eyepiece Cover During self-timer or remote control operation when your eye does not cover the viewfinder eyepiece, stray light may enter the eyepiece and throw off the exposure. To prevent this, use the eyepiece cover (attached to the neck strap) to cover the eyepiece. 1 Remove the eyecup. - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 51
3 Image Settings This chapter explains the digital image settings for the image-recording quality, ISO speed, white balance, color space, and processing parameters. ¡ For Basic Zone modes, only the image-recording quality ( - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 52
3 Setting the Image-recording Quality The 73/83/74/84/76/86 modes record the image in the widely-used JPEG. In the 1 mode, the captured image will require post-processing with the software provided. In the 1+73 (RAW+JPEG) mode, the image is recorded in both the RAW and JPEG simultaneously. Note that - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 53
58 ¡ The number of possible shots and maximum burst (p.54) apply to a Canon 512MB CF card. ¡ The single image size, number of possible shots, and maximum burst during continuous shooting are based on Canon's testing standards (ISO 100 with [Parameter 1] set). The actual - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 54
3 Setting the Image-recording Quality Max. Burst During Continuous Shooting The maximum burst during continuous shooting depends on the imagerecording quality. The approx. maximum burst during continuous shooting is indicated below for each image-recording quality. Note that with high-speed CF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 55
and higher ambient temperatures, the image will look more grainy. ¡ High temperatures, high ISO speeds, or long exposures may cause irregular colors in the image. 55 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 56
colors cannot be obtained with , you can set the white balance manually to suit the respective light source. In the Basic Zone modes, a white object looks white regardless of the type of lighting. With a digital camera, the color temperature can be adjusted with software so that the colors - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 57
the white balance setting. 1 Photograph a white object. ¡ The plain, white object should fill the viewfinder center. ¡ Set the lens focus mode switch to , then focus manually. (p.76) ¡ Set any white balance setting (p.56). ¡ Shoot the white object so that a standard exposure is obtained. 2 Select - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 58
obtained. ¡ If an image was captured while the processing parameter was set to [B/ W] (p.65), it cannot be selected in step 3. Instead of a white object, an 18% gray card (commercially available) can produce a more accurate white balance. 58 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 59
3 White Balance CorrectionN You can correct the standard color temperature for the white balance setting. This adjustment will have the same effect as using a color temperature conversion or color compensating filter. Each color can be corrected to one of nine levels. Users familiar with using color - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 60
3 White Balance Auto BracketingN With just one shot, three images having a different color hue can be recorded simultaneously. Based on the white balance mode's color temperature, the image will be bracketed with a blue/amber bias or magenta/green bias. This is called white balance bracketing. It - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 61
3 White Balance Auto BracketingN 4 Take the picture. s If B/A bracketing has been set, the three images will be recorded onto the CF card in the following sequence: Normal white balance, blue bias, and amber bias. If M/G bracketing has been set, the sequence will be normal white balance, magenta - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 62
will start with "_MG_" (first character is an underscore). ¡ The ICC profile is not appended. The ICC profile is explained in the Software Instruction Manual (PDF). 62 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 63
can be set according to the preset Parameter 1 or Parameter 2 or to Set 1, 2, or 3 that you can set yourself. There is also a B/W parameter for black-and-white photos. In the Basic Zone modes, Parameter 1 will be set automatically. 1 Select [Parameters]. ¡ Select the [m] tab. ¡ Press the key to - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 64
3 Setting the Processing ParametersN The image you capture can be processed automatically by the camera in accordance with the parameter settings you set (five levels each for [Contrast], [Sharpness], [Saturation], and [Color tone]). You can register and save up to three sets of processing parameters - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 65
return to the menu. ¡ When you press the shutter button halfway, the icon will be displayed on the LCD panel. ¡ To obtain natural-looking, black-and-white images, set a suitable white balance. ¡ JPEG images captured with the parameter set to [B/W] cannot be converted to color. Not even with any - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 66
3 Setting the Processing ParametersN Filter Effects The same effect as using filters with black-and-white film can be obtained with digital images. A color can be brightened by using a filter having a similar or same color. At the same time, the complementary colors will be darkened. Filter Effect - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 67
3 File Numbering Methods The file number is like the frame number on film. There are two file numbering methods: [Continuous] and [Auto reset]. The images you take are automatically assigned a file number from 0001 to 9999 and saved in a folder (created automatically) that can hold up to 100 images. 1 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 68
37) AEB setting (p.90) WB correction (p.59)/ WB bracketing (p.60) Color space (p.62) Processing parameters (p.63) Image review time (p.104) Auto rotate display (p.105) ISO speed (p.55) Auto power off (p.41) CF card remaining capacity Flash exposure compensation (p.100) For details on the image info - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 69
4 Setting the AF, Metering, and Drive Modes The viewfinder has seven AF points. By selecting a suitable AF point, you can shoot with autofocus while framing the subject as desired. You can also set the AF mode to suit the subject or obtain the desired effect. Drive mode Metering mode AF mode - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 70
focus mode switch is set to , the AF mode will not take effect during manual focus. ¡ If an Extender (optional) is attached and the maximum aperture of the lens is f/5.6 or smaller, AF will not be possible. For details, see the Extender's instructions. stands for Auto Focus, and is - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 71
cannot be taken even if the shutter button is pressed fully. Recompose the picture and try and focus again. Or see "When Autofocus Fails (Manual Focusing)" (p.76). AI Servo AF for Moving Subjects While you press the shutter button halfway, the camera focuses continuously. ¡ This AF mode is for - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 72
, if the subject moves away from the center AF point, focus tracking continues as long as the subject is covered by another AF point. ¡ With a manually selected AF point, the selected AF point will focus track the subject. AI Focus AF for Automatic Switching of AF Mode AI Focus AF switches - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 73
. In Basic Zone modes and the mode, the AF point is selected automatically. In the modes, you can switch between automatic and manual AF point selection. Automatic AF Point Selection The camera selects the AF point automatically to suit the shooting conditions. All the AF points - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 74
an AF point beyond a peripheral AF point will set the automatic selection mode. • Manual AF point selection Select the desired AF point so the < . > lights in red , right , top ¡ If focus cannot be achieved with an EOS-dedicated, external Speedlite's AF-assist beam, select the center AF point - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 75
Using Focus Lock After achieving focus, you can lock the focus on a subject and recompose the shot. This is called "focus lock." Focus lock works only in the One-Shot AF mode. 1 Set the Mode Dial to a Creative Zone mode. 2 Select the desired AF point. (p.73) 3 Focus the subject. ¡ Move the AF point - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 76
in low light (c) Extremely backlit and reflective subjects Example: Car with a reflective body, etc. (d) Overlapping near and far lens focus mode switch to and focus manually. Manual Focusing Focusing ring 1 Set the lens focus mode switch to . 2 Focus the subject. ¡ Focus by turning the lens - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 77
. After detecting the main subject's position, brightness, background, front and back lighting, etc., the camera sets the proper exposure. ¡ During manual focusing, evaluative metering is based on the center AF point. ¡ If the subject brightness and background light level are very different (there - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 78
i Selecting the Drive Mode Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatically. Press the button. ¡ Look at the LCD panel and press the button to select the drive mode. u : Single shooting When you press the shutter button - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 79
5 Advanced Operations e zone With Creative Zone modes, you can set the desired shutter speed or aperture value to obtain the result you want. You take control of the camera. Creativ ¡ The asterisk M on the right of the page title indicates that the respective feature is available only in - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 80
d Program AE Like (Full Auto) mode, this is a general-purpose shooting mode. The camera automatically sets the shutter speed and aperture value to suit the subject's brightness. This is called Program AE. * stands for Program * AE stands for Auto Exposure 1 Set the Mode Dial to . AF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 81
or use an ND filter (optional) to reduce the amount of light entering the lens. Differences Between and (Full Auto) ¡ In both modes, the automatically-set ¡ AF mode selection ¡ AF point selection ¡ Drive mode selection ¡ Manual/stroboscopic flash ¡ High-speed sync (FP flash) ¡ FE lock ¡ - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 82
s Shutter-Priority AE In this mode, you set the shutter speed and the camera automatically sets the aperture value to suit the subject's brightness. This is called shutter-priority AE. A fast shutter speed can freeze the motion of a fastmoving subject, and a slow shutter speed can blur the subject - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 83
s Shutter-Priority AE ¡ If the maximum aperture blinks, it indicates underexposure. Turn the dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed. ¡ If the minimum aperture blinks, it indicates overexposure. Turn the dial to set a faster - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 84
f Aperture-Priority AE In this mode, you set the desired aperture and the camera sets the shutter speed automatically to suit the subject brightness. This is called aperture-priority AE. A larger aperture opening (lower f/number) will result in a blurred background ideal for portraits. This occurs - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 85
. Aperture Value Display The higher the f/number, the smaller the aperture opening will be. The aperture values displayed will differ depending on the lens. If no lens is attached to the camera, "00" will be displayed for the aperture value. Depth of Field PreviewN Press the depth-of-field preview - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 86
the correct exposure, refer to the exposure level indicator in the viewfinder or use a handheld exposure meter. This method is called manual exposure. * stands for Manual. 1 Set the Mode Dial to . 2 Set the desired shutter speed. ¡ While looking at the LCD panel, turn the dial. 3 Set the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 87
a Manual Exposure 4 Standard exposure index Focus the subject. ¡ Press the shutter button halfway. s The exposure setting will be Exposure level mark displayed on the LCD panel - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 88
focus). (p.85) 3 Take the picture. ¡ The mode cannot be used if the lens' focus mode switch is set to . The result will be the same as using the but the desired depth of field cannot be obtained. Either use a wideangle lens or move further away from the subjects. ¡ In this shooting mode, - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 89
Setting Exposure CompensationN Exposure compensation is used to alter the standard exposure setting set by the camera. You can make the image look lighter (increased exposure) or darker (decreased exposure). You can set the exposure compensation up to ±2 stops in 1/3-stop increments. Increased - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 90
3 Auto Exposure Bracketing (AEB)N By changing the shutter speed or aperture automatically, the camera can bracket the exposure up to ±2 stops in 1/3-stop increments for three successive shots. This is called Auto Exposure Bracketing (AEB). Standard exposure Decreased exposure Increased exposure - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 91
Canceling AEB 3 Auto Exposure Bracketing (AEB)N ¡ Follow steps 1 and 2 to set the AEB amount to < >. ¡ AEB will also be canceled automatically if you turn the power switch to , change lenses, obtain flash-ready, replace the battery, or replace the CF card. AEB cannot be used with flash or - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 92
A AE LockN AE lock enables you to lock the exposure at a different place from the point of focus. By locking the exposure, you can recompose the shot while maintaining the same exposure setting. This is called AE lock. It is effective for backlit subjects. 1 Focus the subject. ¡ Press the shutter - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 93
Bulb Exposures When bulb is set, the shutter stays open while you hold down the shutter button fully, and closes when you let go of the shutter button. This is called bulb exposure. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures. 1 Set the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 94
which may blur the image during close-ups or when a super telephoto lens is used. Set Custom Functions with [b Custom Functions (C.Fn)]. 1 picture promptly after mirror lockup. ¡ During mirror lockup, do not point the camera lens at the sun. The sun's heat can scorch and damage the shutter curtains. - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 95
6 Flash Photography The built-in flash or an EOSdedicated, EX-series Speedlite enables E-TTL II autoflash (evaluative flash metering with preflash), making flash photography as easy as normal shooting. The result is naturallooking flash photos. In the Basic Zone modes (except ), flash - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 96
Using the Built-in Flash E-TTL II autoflash obtains high-precision and consistent flash shots. Using the Built-in Flash in the Basic Zone If necessary, the built-in flash will pop-up automatically in low-light or backlit conditions. (except in the modes) Using the Built-in Flash in the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 97
/ 3.3 - 15.1 Approx. 1 - 6.6 / 3.3 - 21.7 Approx. 1 - 9.3 / 3.3 - 30.5 With EF-S17-85mm f/4-5.6 IS USM [m / ft] ISO speed 100 200 400 800 1600 Wide angle: 17mm Approx built-in flash's coverage is effective with lens focal lengths as short as 17mm. If the lens is shorter than 17mm, the periphery of - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 98
Using the Built-in Flash Using Red-eye Reduction When flash is used in a low-light environment, the subject's eyes may look red in the image. "Red eye" happens when the light from the flash reflects off the retina of the eyes. The camera's red-eye reduction feature turns on the red-eye reduction lamp - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 99
Using the Built-in Flash A FE lockN FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject. 1 Check that the icon is lit. ¡ Press the button to pop-up the built-in flash. ¡ Press the shutter button halfway and look in the viewfinder to check that - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 100
Using the Built-in Flash y Flash Exposure CompensationN In the same way as normal exposure compensation, you can set exposure compensation for flash. You can set flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Select [Flash exp comp]. ¡ Select the [m] tab. ¡ Press the key to - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 101
do the flash operations below. For detailed procedures, see the Speedlite's instruction manual. ¡E-TTL II Autoflash E-TTL II is a new autoflash exposure system incorporating improved flash exposure control and lens focusing distance information, making it more precise than the previous E-TTL (evaluative - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 102
will not fire. ¡ If autofocus cannot be achieved, the external, EOS-dedicated Speedlite's AF-assist beam (if the Speedlite has an AF-assist beam all the features of EXseries Speedlites. Using Non-Canon Flash Units The camera can synchronize with compact, non-Canon flash units at 1/ 200 sec. or slower - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 103
7 Image Playback This chapter explains image playback operations such as how to view and erase captured images and how to connect the camera to a TV monitor. For images taken with another camera: The camera might not be able to properly display images captured with a different camera or edited with - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 104
halfway. However, if auto power off has been set, the camera will turn off automatically after the auto power off time elapses. ¡ During the image review for single-shooting, you can delete the displayed image by pressing the button and selecting [OK]. ¡ To view the images captured so far, see - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 105
key to select [Auto rotate], then press . 2 Select [On]. ¡ Press the key to select [On], then press . 3 Take a vertical shot. ¡ The image review right after image capture will not display the image vertically on the LCD monitor. 4 Playback the image. ¡ Press the button. s The vertical - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 106
3 Setting the LCD Brightness You can adjust the brightness of the LCD monitor to one of five levels. 1 Select [LCD brightness]. ¡ Select the [c] tab. ¡ Press the key to select [LCD brightness], then press . s The LCD Brightness screen will appear. 2 Adjust the brightness. ¡ While looking at - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 107
Image Playback You can select any captured image to view. You can view a single image, the shooting information, an index display, or a magnified view. xSingle image display 1 Playback the image. ¡ Press the button. s The last captured image will appear on the LCD monitor. 2 Select the image. ¡ - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 108
Image Playback Shooting Information Display Image Flash exposure compensation amount Shooting time Shooting date Shutter speed Images recorded/ Total images recorded Aperture Image protect Exposure compensation amount Image-recording quality File No. Histogram ISO speed Color space Metering mode - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 109
Image Playback H Index Display Nine thumbnail images are displayed on one screen. 1 Playback the image. ¡ Press the button. s The last captured image will appear on the LCD monitor. 2 Display the index images. ¡ Press the button. s The selected thumbnail will be highlighted within a green - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 110
Image Playback u/y Magnified View You can magnify the image by 1.5x to 10x on the LCD monitor. 1 Playback the image. ¡ Display the image in the single-image or image info display mode. 2 Magnify the image. ¡ Press the button. s At first, the center of the image will be magnified. ¡ To increase the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 111
Image Playback C Jump Display During the single image, image with shooting information, index, or magnified image display, you can jump forward or back to images stored on the CF card. 1 Playback the image. How to use Jump function Jump bar 2 Go to the jump display. ¡ Press the button. s On - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 112
Image Playback 3 Automated Playback of Images (Auto Play) You can playback the CF card's images in an automatic slide show. Each image will be displayed for about 3 sec. 1 Select [Auto play]. ¡ Select the [x] tab. ¡ Press the key to select [Auto play], then press . s The Autoplay screen will - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 113
Image Playback 3 Rotating an Image You can rotate an image by 90° or 270° clockwise. The image can then be displayed in the correct orientation during playback. 1 Select [Rotate]. ¡ Select the [x] tab. ¡ Press the key to select [Rotate], then press . s The Rotate screen will appear. 2 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 114
Displaying the Images on TV By connecting the camera to a TV set with the video cable (provided), you can view the captured images on a TV set. Always turn off the camera and the television before connecting or disconnecting them. 1 Connect the camera to the TV. ¡ Open the camera's terminal cover. ¡ - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 115
3 Protecting Images This prevents the image from being erased accidentally. 1 Select [Protect]. ¡ Select the [x] tab. ¡ Press the key to select [Protect], then press . s The Protect screen will appear. Image protect icon 2 Protect the image. ¡ Press the key to select the image to be - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 116
L Erasing Images You can erase images individually or erase all the images at one time in the CF card. Protected images (p.115) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it. To prevent important images from being erased - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 117
L Erasing Images Erasing All Images 1 Playback the image. ¡ Press the button. 2 Display the Erase menu. ¡ Press the button. s The Erase menu will appear at the bottom of the screen. 3 Select [All]. ¡ Press the key to select [All], then press . s The confirmation dialog will appear. 4 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 118
s When the formatting is completed, the menu will reappear. ¡ A non-Canon CF card or a CF card formatted with another camera or personal computer might CF" "Err CF" (CF error) displayed on the LCD panel indicates a problem with the CF card that prevents images from being recorded or read. Use - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 119
8 Direct Printing from the Camera You can connect the camera directly to a printer and print out the images in the CF card. The camera enables direct printing with printers compatible with " PictBridge", Canon " CP Direct", and Canon " Bubble Jet Direct." 119 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 120
types of printers. After "Preparing to Print" on the next page, follow the instructions applicable to your printer on the pages indicated. Canon CP printer Canon PIXMA/DS/BJ printer Non-Canon printer wPictBridge or ACP Direct Compatible with PictBridge Compatible with Compatible Bubble Jet - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 121
/PTP] is set. Connecting the Camera to the Printer 1 Turn the camera's power switch to . 2 Set up the printer. ¡ For details, refer to the printer's manual. ¡ RAW images are not compatible with direct printing. ¡ Do not disconnect the cable during direct printing. 121 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 122
to the camera's terminal, the cable plug's icon must face the front side of the camera. ¡ To connect to the printer, refer to the printer's instruction manual. 4 Turn on the printer. 5 Turn the camera's power switch to . s Some printers may have a beeping sound. 122 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 123
checking the battery level. ¡ If there is a long beeping sound in step 5, it indicates a problem with the PictBridge printer. To find out what's wrong, do the following: Press the button cable. For direct printing, using AC Adapter Kit ACK-DC20 (optional) to power the camera is recommended. 123 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 124
with PictBridge The setting options will differ depending on the printer. Some settings might be disabled. For details, refer to your printer's instruction manual. Printer-connected icon 1 Select the image(s) to be printed. ¡ Check that the icon is displayed on the upper left of the LCD - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 125
Photo Paper Plus Glossy Fast Photo Photo Paper Pro Default Photo Paper Plus Glossy If you are using a non-Canon printer, refer to the printer's instruction manual. USetting the Layout ¡ Press the key to select the desired layout, then press . s The Print setting screen will reappear - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 126
a white border along the edges. **-up Default Option to print 2, 4, 8, 9, 16, or 20 copies of same image on one sheet. With a Canon printer, the default is borderless. HDate imprinting 4 Set the other options. ¡ If desired, also set the date imprinting, printing effects, and number - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 127
printing but it does not resume, operate the buttons on the printer to resume printing. For details, see the printer's instruction manual. Error Messages If a problem occurs during printing, an error message will appear on the camera's LCD monitor. Press to stop printing. After resolving the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 128
A Printing with CP Direct Printer-connected icon 1 Select the image to be printed. ¡ Check that the icon is displayed on the upper left of the LCD monitor. ¡ Press the key to select the image to be printed. 2 Press . s The Print setting screen will appear. Print setting screen Set the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 129
[Image] A Printing with CP Direct 4 Set the options as desired. ¡ Set the [Image], [Borders], and [Date] as desired. [Borders] [Date] ¡ Press the key to select the desired option, then press . ¡ Press the key to select the desired setting, then press . ¡ [Image] is selectable when - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 130
stop until it finishes printing the image. If you are printing multiple images, the printing will stop after the current image is finished printing. ¡ If a problem occurs during printing, an error message will appear on the camera's LCD monitor. Select [Stop] or [Resume] (after resolving the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 131
S Direct Printing with Bubble Jet Direct 1 Printer-connected icon Select the image to be printed. ¡ Check that the icon is displayed on the upper left of the LCD monitor. ¡ Press the key to select the image to be printed. 2 Press . s The Print setting screen will appear. Print - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 132
S Direct Printing with Bubble Jet Direct [Paper] 4 Set the options as desired. [Borders] [Date] ¡ Press the key to select the desired option, then press . ¡ Press the key to select the desired setting, then press . ¡ [Paper] is the size of the paper loaded in the printer. ¡ Check - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 133
, the printing will stop and the paper will be discharged. ¡ If a problem occurs during printing, an error message will appear on the camera's LCD monitor. does not resume printing, it will resume automatically after you resolve the problem. ¡ If you are using a BJ printer equipped with an operation - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 134
[Trimming], then press . s The trimming screen will appear. 2 Trim the image. ¡ The image area within the trimming frame will be printed. ¡ The operation guide disappears while you trim the image. It will reappear after 5 sec. of idle time. Changing the trimming frame size ¡ When you press the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 135
Setting the Trimming Image area to be printed 3 Exit the menu. ¡ Press . s The Print setting screen will reappear. s On the upper left, you can see the trimmed image area that will be printed. ¡ Depending on the printer, the trimmed image area might not be printed as you specified. ¡ The - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 136
Easy Printing When you print directly from your camera to your printer, the printing settings will be saved in your camera. To use the same settings again, follow the steps below. 1 Connect the camera to a printer and prepare for printing. 2 Playback the images and select the ones to be printed. 3 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 137
when you make prints with a DPOFcompatible printer or photo lab. About DPOF DPOF (Digital Print Order Format) is a standard for recording print ordering instructions to the CF card. It is for images taken with a digital camera, and you can specify which photos and the quantity to print. With a DPOF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 138
3 Print Ordering Print Settings Set the print type, date imprinting, and file No. imprinting. The print settings will be applied to all print-ordered images. (They cannot be set individually for each image.) 1 Select [Print order]. ¡ Select the [x] tab. ¡ Press the key to select [Print Order], - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 139
and photo labs might not be able to print the photos as you specified. If this happens with your printer, refer to the printer's instruction manual. Or check with your photo lab about compatibility when ordering prints. ¡ Do not insert into the camera a CF card whose print order specifications have - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 140
3 Print Ordering Selecting Individual Images for Printing 1 Select [Order]. ¡ Press the key to select [Order], then press . s The Order screen will appear. 2 Select the image to be printed. ¡ Press the key to select the image to be printed. 3 Order the print. ¡ The print order will vary - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 141
3 Print Ordering 4 Exit the menu. ¡ Press the button. s The Print Order screen will reappear. ¡ Press the button again to save the print order to the CF card. The menu will then reappear. 141 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 142
3 Print Ordering Selecting All Images The print order can also be set or canceled for all the images in the CF card. For standard-type prints, a quantity of one will be ordered for all the images. Note that after following the "Selecting Individual Images" procedure, if you do the "Selecting All - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 143
3 Direct Printing with DPOF With a printer compatible with direct printing, you can easily print images specified with DPOF. 1 Prepare to print. ¡ See page 121, 122. See "Setting the Camera" and "Connecting the Camera to the Printer" (steps 1 to 5). 2 Select [Print order]. ¡ Select the [x] tab. ¡ - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 144
for the number of index images with Bubble Jet Direct, see the BJ printer's instruction manual. ¡ If you stopped the printing and want to resume printing the remaining images, capacity was low. ¡ If there is a printing problem, see page 127 for PictBridge, page 130 for CP Direct, or page - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 145
10 Customizing the Camera Custom Functions enable you to customize various camera features to suit your picture-taking preferences. ¡ Custom Functions work only in Creative Zone modes. 145 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 146
3 Setting a Custom FunctionN Custom Function No. 1 Select [Custom Functions (C.Fn)]. ¡ Select the [b] tab. ¡ Press the key to select [Custom Functions (C.Fn)], then press . s The Custom Function screen will appear. 2 Select the Custom Function No. ¡ Press the key to select the Custom - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 147
3 Setting a Custom FunctionN Resetting All Custom FunctionsN 1 Select [Clear settings]. ¡ Select the [b] tab. ¡ Press the key to select [Clear settings], then press . 2 Select [Clear all Custom Functions]. ¡ Press the key to select [Clear all Custom Functions], then press . 3 Select [ - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 148
3 Custom Function SettingsN C.Fn-1 SET button/Cross keys funct. You can change the function assigned to the button and keys for shooting. 0: Normal 1: SET:Quality When you press , the [z Quality] menu appears so you can quickly change the setting. 2: SET:Parameter When you press , - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 149
wait for the decisive moment. C.Fn-5 AF-assist beam You can enable or disable the camera's AF-assist beam or have it emitted by the EOS-dedicated Speedlite instead. 0: Emits 1: Does not emit The AF-assist beam is not emitted at all regardless of the shooting conditions . 2: Only emits ext. flash - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 150
3 Custom Function SettingsN C.Fn-7 Mirror lockup 0: Disable 1: Enable Effective for close-up and telephotos shots to prevent camera shake caused by the mirror's reflex action. For more on mirror lockup, see page 94. C.Fn-8 E-TTL II 0: Evaluative Fully automatic flash photography under all - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 151
11 Reference This section will help you understand your camera better. It covers information on camera features, system accessories, and other reference information. 151 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 152
k: User selectable Mode Dial Basic Zone Creative Zone 1 2 3 4 5 6 7 d s f a8 Quality JPEG kkkkkkkkkkkk RAW kkkkk RAW + 7L kkkkk Auto ooooooo Manual kkkkk Auto WB oooooookkkkk Preset WB, Custom WB, WB correction, WB bracketing Parameters o (Parameter 1) kkkkk kkkkk One-Shot ooo - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 153
Metering e Center-weighted Average Metering AF point selection Automatic AF point selection Manual AF point selection AE lock is applied at the AF AE lock is AF point. AE lock is applied at the center AF point. * When the lens' focus mode switch is set to , AE lock is applied at the center - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 154
Troubleshooting Guide If there is a problem, first refer to this Troubleshooting Guide. If this Troubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center. Power Source The battery cannot be recharged. ¡ You are using the wrong battery. s Use Battery Pack - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 155
Troubleshooting Guide The camera turns off by itself. ¡ Auto power off is in effect cannot focus properly, focus manually. (p.28, 76) The LCD monitor does not display a clear image. ¡ The LCD monitor screen is dirty. s Use a soft, lens cloth to clean the screen. ¡ The LCD's service life has expired. - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 156
Troubleshooting Guide The image is out of focus. ¡ The lens focus mode switch is set to . s Set the lens focus mode Err 02], see page 157. ¡ You are using a non-Canon CF card. s Using Canon CF cards is recommended. (p.159) Image Review & Operation The image cannot be erased. ¡ The image is erase - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 157
Troubleshooting Guide problem for respective error code. If the same error occurs often, something is probably wrong with the camera. Jot down the "xx" error code and contact your nearest Canon Service the camera and lens is faulty. Clean the lens contacts. (p.9) There is a problem with the CF card - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 158
, high-capacity, lithium-ion, secondary power pack. AC Adapter Kit ACK-DC20 Power source kit (AC adapter, DC coupler, power cord) for supplying power . It can accommodate the camera attached with the EFS18-55mm f/3.5-5.6 ll lens. Shoe-mount Speedlites An EX-series Speedlite can be attached to the - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 159
the camera's eyepiece to further expand the dioptric adjustment range. CF card Data storage media where the captured images are recorded. CF cards made by Canon are recommended. PC card adapter Enables a CF card to be inserted into a PC card slot or PC card reader. 159 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 160
MT-24EX E-series Dioptric Adjustment Lenses Bundled Accessories Eyecup Ef * The Lens Kit includes the EF-S 18-55mm lens. Angle Finder C Wide Strap EW-100DBll Semi-hard Case batteries 160 AC Adapter Kit ACK-DC20 Car Battery Adapter CBC-NB2 DC Coupler DR-700 Compact Power Adapter CA-PS700 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 161
card adapter Personal computer Windows XP (Home Edition / Professional) PC card slot Windows 2000 Professional Windows ME USB port Windows 98 Second Edition (2.0/1.1) Mac OS X • EOS DIGITAL Solution Disk • ArcSoft PhotoStudio Disk • Software Instruction Manual (PDF) Interface Cable IFC-400PCU - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 162
Type: Recording media: Image size: Compatible lenses: Lens mount: Digital, single-lens reflex, AF/AE camera with built-in flash CF card (Type I or II) *Compatible with Microdrive and 2GB and larger CF cards 22.2 x 14.8mm Canon EF lenses (including EF-S lenses) (35mm-equivalent focal length is equal - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 163
Vertical/Horizontal 95% Magnification: 0.8x (-1 diopter with 50mm lens at infinity) Eyepoint: 21 mm Built-in dioptric adjustment:-3.0 0.5 - 18 (at 20°C/68°F, ISO 100) Focus modes: One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing (MF) AF point selection: Auto or manual Selected AF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 164
- 20 (at 20°C/68°F with 50mm f/1.4 lens, ISO 100) Exposure control: Program AE (Full priority AE, aperture-priority AE, depth-of-field AE, manual exposure, E-TTL II autoflash ISO speed: Basic Zone modes pop-up flash Flash metering: E-TTL II autoflash Guide No.: 13/43 (ISO 100, in meters/feet) - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 165
to match lens focal length: Provided • Drive System Drive modes: Single, continuous, and self-timer/remote control Continuous: Max. 3 shots per sec. Max. burst: JPEG (Large/Fine): Approx. 14 shots RAW: Approx. 5 shots, RAW+JPEG (Large/Fine): Approx. 4 shots * With a Canon 512MB CF - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 166
Specifications • DPOF: Digital Print Order Format DPOF: Version 1.1 compatible • Customization Custom Functions: 9 Custom Functions with 24 settings • Power Source Battery: Battery life: Battery check: Power saving: Date/Time battery: Battery Pack NB-2LH, quantity 1 * AC Adapter Kit ACK-DC20 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 167
Rated input: 100 - 240 V AC, 50/60 Hz Rated output: 8.4 V DC, 0.55 A Working temperature range: 0°C - 40°C / 32°F - 104°F Dimensions (W x H (without power cord) ¡ All the specifications above are based on Canon's testing standards. ¡ The camera's specifications and physical appearance are subject - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 168
in accordance with the instructions, may cause harmful cable with the ferrite core provided with the digital camera must be used with this equipment in order manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 169
Index A AC Adapter Kit 24, 158 Access lamp 27 Accessories 158 A-DEP 88 Adobe RGB 62 AE rate 52 Continuous 67 Continuous shooting 78 Contrast 64 CP Direct 128 Creative Zone modes 16 Cross keys 18, 30 Custom Functions 148 Custom white balance 57 D DC coupler 24 Depth-of-field preview 85 - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 170
the Camera 42 I Image processing 53 Image review time 104 Image size 153 Image Zone INFO 68, 107 Interface cable 3 170 ISO speed 55 J JPEG 52 Jump by 10 images/100 images... 102 Lens 9, 25 M M (Manual 86 Magnified view 110 Main Dial 18, 29 Manual AF point selection 73 Manual Focusing - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 171
speed 82 Single image display 107 Single shooting 78 Specifications 162 Sports 47 sRGB 62 Standard 139 Style 128, 131 System Map 160 T Timer 18 Toning effect 66 Trimming 134 Tv 82 V Video cable 114 Video OUT 114 Viewfinder 15 W WB-BKT 60 White balance 56 White balance bracketing - Canon 0209B001 | EOS DIGITAL Rebel XT / EOS 350D Instruction Manual - Page 172
2-chome, Minato-ku, Tokyo 108-8011, Japan This Instruction Manual booklet is current as of January 2005. For information on the camera's compatibility with any accessories and lenses introduced after this date, contact any Canon Service Center. CT1-1287-001 © CANON INC. 2005 PRINTED IN JAPAN
E
INSTRUCTION MANUAL
E
INSTRUCTION
MANUAL