Canon 1293B002AA/006AA Multimedia Projector WUX5000 / WUX4000 User's Manual
Canon 1293B002AA/006AA - Lcos Xga Projector Manual
UPC - 013803065282
View all Canon 1293B002AA/006AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon 1293B002AA/006AA manual content summary:
- Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual / Installation Manual Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 2
How to Use This Manual Thank you for purchasing a Canon projector. The WUX5000 / WUX4000 Multimedia Projector (hereinafter referred to as "the projector") is a high-performance projector that is capable of projecting a high-resolution computer screen and high-quality digital image on a large screen - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 3
the Lamp Brightness (P97) Using the Power Saving Mode (P98) Turning on the Projector by Connecting the Power Cord (P98) Disabling the Beep During Operation (P99) Disabling Buttons (P99) Hiding Guide Messages (P101) Setting a Password (P103) Producing a Presentation Temporarily Blacking Out an Image - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 4
Table of Contents How to Use This Manual 2 Quick Reference Guide 3 Safety Instructions...10 Safety Precautions ...11 CAUTION ON HANGING FROM THE CEILING 11 ■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE 12 AC Power Cord Requirement 14 Federal Communication Commission Notice 15 Canadian - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 5
the Keystone Adjustment 63 Selecting an Image Mode 64 ■ Image Modes...64 ■ How to Select an Image Mode 65 Turning Off the Projector 66 Useful Functions Available During a Presentation 67 Useful Functions Available During a Presentation 68 Temporarily Blacking Out an Image 68 Freezing the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 6
Table of Contents Setting Display Status 77 Selecting an Image Projection Mode 77 Selecting an Input Signal Type (Analog PC 78 Selecting an Input Signal Type (Component 78 Adjust Input Signal (Analog PC) Total dots 79 Adjust Input Signal (Analog PC) Tracking 79 Adjust Input Signal (Analog PC) - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 7
Channel Settings 100 Selecting a Display Language 101 Showing / Hiding the Guide Screen 101 Showing / Hiding the Input Status 102 Selecting the HDMI Resetting to the Default Setting 109 Checking Projector Information 110 Installation Manual (Installation and Maintenance 111 Installation ...113 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 8
Vista...134 ■ Windows XP ...135 ■ Mac OS X ...136 ■ Resetting the IP Address Setting of the Computer 136 Network Settings on the Projector 137 Locking the Network Settings 137 Turning On / Off the Network Function 138 Setting a Network Password 138 Registering a Network Password 139 Turning On - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 9
Troubleshooting ...168 LED Indicator Meanings ...168 Symptoms and Solutions ...169 ■ You Cannot Turn on the Projector 169 ■ You Cannot Project an Image from the Projector Aspect and Screen Aspect 173 Supported Signal Types 175 Product Specifications 176 ■ Projector ...176 ■ Remote control ... - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 10
accidents. If your projector does not seem to be operating properly, read this manual again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 11
50 cm (1.6') 50 cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended time, unplug the projector from the power outlet. • Do not project the same image for - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 12
■READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 13
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 14
Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets the requirements for use in the country waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein) 14 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 15
Safety Instructions Safety Instructions Federal Communication Commission Notice Multimedia Projector, Model: WUX5000 / WUX4000 This in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A. Inc. One Canon Plaza, - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 16
Instructions Precautions for Use As this section contains important safety-related information, be sure to read the following carefully beforehand in order to use your projector the Canon Customer Support Center. • Do not use any power cord other than the type that is included with this projector. • - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 17
Safety Instructions Safety Instructions Warning Pay attention to the following points regarding to a body of water. • Do not place containers containing a liquid on top of the projector. • Do not place the projector in any location where it will be exposed to oily smoke or steam, such as a kitchen - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 18
Instructions Warning Pay attention to the following points regarding installation and handling of the projector. Failure to do so may cause a fire, electric shock or personal injury. • Do not move the projector the Canon Customer Support Center. • Do not disassemble or modify the projector (including - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 19
a fire or malfunction. It is recommended that periodic maintenance of the projector be performed. For details of maintenance costs, contact the Canon Customer Support Center. • When hanging the projector from a ceiling, put the projector down on the floor or a workbench before attaching or replacing - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 20
to cool down sufficiently. Failure to do so could result in a burn or personal injury due to heat from the lamp or projector. • When an instruction to replace the lamp has been displayed (LAMP Indicator Displays (P33)), the possibility of the lamp breaking will increase. Replace the lamp with - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 21
. If the projector is subjected to excessive impacts during transportation, the lens unit may be damaged. Removal and installation of the lens unit should not be performed by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. 21 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 22
greater than 2,300 m, or for projecting upward / downward: When using the projector at altitudes greater than 2,300 m, or for upward projection or downward projection, it is necessary to change the settings of the projector. For further details, contact the Canon Customer Support Center. 22 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 23
Before Use 23 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 24
D-sub 15-pin) For the U.S.A. and Canada User's Manual / Installation Manual (CD-ROM) Warranty Card Important Information ■Installing Remote buttons on the remote control are inoperative when you attempt to operate the projector, replace the batteries with new ones. • Do not drop the remote - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 25
Before Use Supplied Accessories Pay attention to the following points when handling the batteries. Failing to do so could result in a fire or personal injury. • Do not heat, short circuit or disassemble the batteries, or place them in a fire. • Do not attempt to recharge the batteries. • Remove the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 26
the remote control within a distance of approximately 8 m (26.3') from the projector. • Use the remote control within an angle of 25° in any direction strong light of lighting equipment. • When you use 2 or more projectors at the same time, you can change the channel settings to prevent the 2 remote - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 27
Before Use Part Names Main Unit ■Front Side Power cord connector (P45) Side control (P32) Lens unit Air intake vent Terminals and connectors Infrared remote receiver (P26) Air filter (P159) Do not block the air intake. Doing so may cause a malfunction. Anti-theft lock hole An anti-theft wire - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 28
Part Names ■Rear Side ■Bottom Side Exhaust vent Do not block the air exhaust. Doing so may cause a malfunction. Lamp cover Infrared remote receiver (P26) Screw holes for installation of ceiling attachment Adjustable feet (P118) 28 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 29
(part No.: RS-CL11) is required in order to mount the projector on the ceiling. Depending on the installation environment, an extension pipe (part No.: RS-CL08 or RS-CL09) may also be required. Contact the Canon Customer Support Center for more detailed information. • Make sure to use the optional - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 30
control or the side control on the main unit. The remote control allows you to operate all functions of the projector. POWER button (P45, P66) Turns the projector on or off. FOCUS button (P59) Adjusts focusing. [ ] / [ ] buttons: Moves the focus posi- tion farther away. [ ] / [ ] buttons: Moves the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 31
Part Names Before Use INPUT button (P49) Switches the input signal. LENS-SHIFT button (P60) Moves the lens up, down, left, or right. ZOOM button (P58) buttons: Move the lens. Adjusts the image size. [ ] / [ ] buttons: Increase the image size. [ ] / [ ] buttons: Decrease the image size. - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 32
" (P33). • POWER ON (green): Lights up or flashes when the power is on. • STAND BY (red) : Lights up or flashes during standby or when the projector is shut down. • WARNING (red) : Lights up or flashes when an error occurs. • LAMP (orange) : Flashes when the time for replacing the lamp is near - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 33
Before Use Part Names ■LED Indicator Displays The illumination status of the LED indicators indicates the operating status of the projector. : Off : Lit : Flashing LED indicator POWER ON (green) STAND BY (red) WARNING (red) LAMP (orange) TEMP (red) Operating status Power is not connected. - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 34
LAN port (P132) Connects the LAN cable. Used to connect the projector to a network. (2)ANALOG PC / COMPONENT IN Terminal ( /COMPONENT single cable. (1) (2) (3) (4) (5) (6) (7) (5)Service Port (CONTROL) This terminal is used by servicing technicians. It is not used during ordinary use. (6) - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 35
MULTIMEDIA PROJECTOR User's Manual (Operation) 35 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 36
36 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 37
Projecting an Image 37 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 38
and Projecting an Image Installation work should be performed by a qualified technician. Contact the Canon Customer Support Center for further information. Connecting the Projector to Equipment (P128) Starting Projection (P45) Do you want to project an image from a notebook computer? Yes No - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 39
User's Manual Projecting an Image Connecting the Projector Connecting the Projector to a Computer Connect the projector to the computer. A digital connection ( VGA cable (Input signal type: [Analog PC] - P48) Computer Projector Monitor output terminal (mini D-sub 15-pin) To ANALOG PC / - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 40
-pin BNC terminal converter cable (not included) Monitor output terminal (mini D-sub 15-pin) BNC cable (not included) When inputting corresponding sound. Projector To ANALOG PC / COMPONENT IN AUDIO OUT terminal (AUDIO OUT) Audio cable (not included) To AUDIO IN • A signal with a dot clock of - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 41
User's Manual Projecting an Image Connecting the Projector ■HDMI cable (Input signal type: [HDMI] - P48) Computer Projector HDMI cable ( is possible to output audio from the projected images to amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Audio cable (not included) Mini - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 42
equipment. The description provided here is one example. For more detailed information, refer to the manual for the connected AV equipment. Before connecting the cables, turn off both the projector and AV equipment. ■Connecting to Digital Video Output Terminal (Digital Connection) HDMI cable (Input - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 43
User's Manual Projecting an Image Connecting the Projector ■Connecting to Analog Video Output Terminal (Analog Connection) Component cable (Input signal type: [Component] - P48) A component video signal from the AV equipment can be inputted into the projector by connecting the component cable to - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 44
■Outputting Audio to Speakers It is possible to output audio from the projected images to AV equipment or amplified speakers. Projector Speaker To AUDIO OUT RCA terminal Audio cable (not included) Mini jack Audio input terminal (AUDIO IN) Use an audio cable without a built-in resistor - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 45
Starting Projection 1 Check the connection between the projector and the computer or AV equipment. (P42 - P44) 2 Connect the power cord and make sure that the [STAND BY] indicator is lit (red). User's Manual Projecting an Image Connect the ground terminal on the power plug to ground. Not doing so - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 46
a later time. (P101) If the language selection screen is out of focus, press the FOCUS button to perform focus adjustment. (P59) Remote control Projector An item highlighted in orange will be selected. ■When the Password Input Screen Appears If you have set a password, the Password input screen - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 47
User's Manual Projecting an Image Starting Projection ■When Notebook Computer Screen method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 7, you can turn on image output by holding down the Windows logo - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 48
the input signal since the last projection. ■Types of Input Signals The table below shows the relationship among input signals supported by the projector, input terminals and connection cables. Input signal Input terminal Types of connection cables HDMI HDMI cable (not included) Digital PC - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 49
User's Manual Projecting an Image Selecting an Input Signal (INPUT) ■Selecting an Input Signal 1 Press the INPUT button to display the window shown on the lower right. Remote control Projector The currently active input signal is marked with a circle and highlighted in orange. An input signal - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 50
Adjusting the Image Setting the Display Resolution of the Computer Based on the performance of the projector (resolution: 1920 x 1200 pixels), set the display resolution of the computer to "1920 x 1200 pixels" or the resolution closest to the output signal resolution of - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 51
User's Manual Projecting an Image Adjusting the Image ■Mac OS X 1 Open the Apple Menu and select [System Preferences]. ], [Vertical position], [Horizontal pixels] and [Vertical pixels] to make adjustments. (P79 - P81) • For the signal types supported by the projector, see the table on page 175. 51 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 52
aspect ratio of the projected image. 1 Press the MENU button to display a menu window. Remote control Projector 2 Use the [ ] / [ ] buttons to select the [Display settings] tab. Remote control Projector 3 Select [Screen aspect] with the [ ] / [ ], and then press the OK button. Remote control - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 53
Adjusting the Image 4 Use the [ ] / [ ] buttons to select the desired contents. Remote control Projector User's Manual Projecting an Image 16:10 Select this when you use a screen with aspect ratio of 16:10. Also, select this when you project an image - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 54
the lower right. Remote control 2 Use the [ ] / [ ] buttons to move the image. The minimum value is -60, and the maximum value is +60. Remote control Projector 16:9 screen [ ] button Moves image up [ ] button Moves image down 3 When the image fits the screen, press the OK button. 54 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 55
User's Manual Projecting an Image Adjusting the Image Moving Image with 4:3 D. Image [ ] to move the image. The minimum value is -160, and the maximum value is +160. Remote control Projector 4:3 screen [ ] button Moves the image left [ ] button Moves the image right 3 When the image fits the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 56
Adjusting the Image ■Selecting Aspect Ratio Select the aspect ratio of projected image based on the input signal type, aspect ratio of the screen and resolution. For more details, refer to page 173 "Relationship between Aspect and Screen Aspect". Types of Aspect Ratios Auto The image is projected at - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 57
aspect ratio type. For more details on the aspect ratios, refer to page 173 "Relationship between Aspect and Screen Aspect". Remote control Example: User's Manual Projecting an Image You can also select any aspect ratio from the menu. (P77) Some aspect ratios may not appear depending on the type - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 58
The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom function. (P125) 1 Press either the ZOOM - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 59
User's Manual Projecting an Image Adjusting the Image Adjusting the Focus To adjust the focus, press the FOCUS button on the remote control or the LENS button on the projector. For the projection distances of the Standard Zoom Lens (RS-IL01ST) / Long Zoom Lens (RS-IL02LZ) / Short Fixed Lens (RS- - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 60
To adjust the screen position up, down, left, or right, press the LENS-SHIFT button on the remote control or the LENS button on the projector. This function is referred to as "lens shift" because the position of the projected image is changed by moving the lens position. (P126) • The available - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 61
User's Manual Projecting an Image Adjusting the Image ■Resetting the Position The lens adjustment, press and hold the LENS-SHIFT button on the remote control or the LENS button on the projector to display the [Lens shift Reset] window. The selections for the lens currently used are displayed. Use - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 62
to correct keystone distortion. • Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is too large to adjust, move the projector installation position so that it is completely straight. • The result of keystone adjustment is stored in memory. If you place the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 63
User's Manual Projecting an Image 2 Press the pointer buttons to adjust. Remote control Projector Adjusting the Image [ ] button Reduces the length of the upper edge [ ] button Reduces the length of the lower edge Screen [ ] button Reduces the length of - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 64
dark room. This image mode emphasizes color saturation. Suitable for viewing images taken with a digital camera that supports sRGB in a moderately dark room. This image mode supports the sRGB standard. Suitable for watching video taken with a video camera in a moderately dark room. Suitable for - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 65
User's Manual Projecting an Image Selecting an Image Mode ■How to Select an Image Mode Press the IMAGE button on the remote control to select. The image - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 66
turn off the power. The lamp goes off, the [STAND BY] indicator starts flashing in red and the cooling process starts. • You cannot turn the projector on while the cooling process is in operation. • If you want to continue projecting without turning off the power, press a button other than POWER, or - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 67
Useful Functions Available During a Presentation Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 68
image on the menu. (P86) • The lamp remains illuminated while the image is blacked out. Press the button to freeze the moving image. The projector shows the following icon. Screen Press the button again to cancel the FREEZE function. • It is also cancelled when the input signal is terminated. 68 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 69
User's Manual Useful Functions Available During a Presentation Useful Functions Available During a Presentation Adjusting the Volume Muting the Sound Useful when: • You want to adjust the volume level of the projector or external speakers. Remote control Useful when: • You want to temporality - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 70
of the image is enlarged each time the button is pressed. Remote control You can move the enlarged area by using the buttons. Remote control Projector Screen Screen You can restore the original size of the image by pressing the button. • The magnification appears on the screen. 70 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 71
Useful Functions Available During a Presentation Showing the Elapsed Time Useful when: • You want to manage the timing of the presentation. User's Manual Useful Functions Available During a Presentation Screen Press the button to start counting. • The elapsed time is displayed on the lower right - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 72
72 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 73
Setting Functions from Menus Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 73 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 74
menu screen is divided into 5 tabs as shown below. [Display settings] tab (P77) [System settings] tab (P98) You can set the operation of the projector. You can set the type of signal or the method of projection of the images input. [Network Setting] tab (P137) [Image adjustment] tab (P88) You - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 75
[ ] / [ ] buttons to select a tab. Remote control Projector • If the tab position is not highlighted in orange, use the [ ] / [ ] buttons to move the highlight to the top. 3 Use the [ ] / [ ] buttons to select an item. Remote control Projector User's Manual Setting Functions from Menus 75 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 76
different screen (1) Example: Menu position 1. Select Menu Position. 2. Press the OK button to display a different screen. 3. Then follow the instruction on the screen. Selecting from a different screen (2) Example: Tracking 1. Select Input signal settings. 2. Select Tracking. 3. Press the OK button - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 77
Setting Display Status User's Manual Setting Functions from Menus Selecting an Image Projection Mode [Aspect] HDMI Digital PC Component Analog PC You can select a projection mode corresponding to the aspect - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 78
to accept your setting and then press the MENU button. Select an input signal corresponding to the resolution of the computer. • For the signal types supported by the projector, see the table on page 175. Press the OK button to accept your setting and then press the MENU button. • [Auto] is the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 79
User's Manual Setting Functions from Menus Adjust Input Signal (Analog PC) Total dots [Input signal settings] - [Total dots] HDMI Digital PC Component Analog PC You can adjust - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 80
Setting Display Status Adjust Input Signal (Analog PC) Horizontal position [Input signal settings] - [Horizontal position] HDMI Digital PC Component Analog PC You can adjust the horizontal position of the screen when the projected image is shifted in the horizontal direction. Display settings - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 81
length of the screen is too long or too short in the vertical direction. Display settings Input signal settings Vertical pixels User's Manual Setting Functions from Menus Use [ ] / [ ] to select a value. Use [ ] / [ ] to select a value. Screen When you have completed the adjustment, press the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 82
level is selected automatically in [Auto] mode. (Some AV equipment may not support this.) • If the HDMI output of your AV equipment allows switching between For more detailed information, refer to the manual for the AV equipment connected to the projector. Auto RGB YCbCr Select the optimal color - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 83
] HDMI Digital PC Component Analog PC You can select this as required when the images have low resolution. Display settings Progressive User's Manual Setting Functions from Menus Off The entire input signal (100%) is projected. The images projected may be smaller than the full projection - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 84
Setting Display Status Selecting a Menu Position [Menu position] HDMI Digital PC Component Analog PC You can change the position of menus displayed. Display settings Menu position Correcting the Screen Color [Screen color] HDMI Digital PC Component Analog PC You can adjust the color - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 85
Normal projection (none) Ceiling mounted projection User's Manual Setting Functions from Menus Rear projection None Ceiling mounted mounted projection • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 86
Setting Display Status No Signal Screen [User screen settings] - [No signal screen] HDMI Digital PC Component Analog PC You can display either a black or blue screen when there is no input signal. Display settings User screen settings No signal screen Screen When Blank [User screen settings - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 87
ratio of the projection screen. (P52) Display settings Screen aspect Projector on User's Manual Setting Functions from Menus Skip Canon logo Projects an input signal immediately after turning on the projector. Displays the Canon logo that was registered in advance at the factory. Press the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 88
. Photo/ sRGB Suitable for viewing images taken with a digital camera that sup- ports sRGB in a moderately dark room. This image mode supports the sRGB standard. Video Suitable for watching video taken with a video camera in a moder- ately dark room. Cinema Suitable for watching media - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 89
memory is displayed in the menu as [Baseline Image Mode]. Use the [ ] / [ ] buttons and select the save destination. (Saved memories are indicated by checkmarks.) User's Manual Setting Functions from Menus When the desired save destination is selected, press the OK button. 89 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 90
Selecting an Image Quality Adjusting the Brightness [Brightness] HDMI Digital PC Component Analog PC You can adjust the brightness of images. Image adjustment Brightness Adjusting the Contrast [Contrast] HDMI Digital PC Component Analog PC You can adjust the contrast of images. If you want - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 91
User's Manual Setting Functions from Menus Adjusting the Sharpness [Sharpness] HDMI Digital PC Component Analog PC You can adjust the sharpness of images. Image adjustment Sharpness Selecting - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 92
Selecting an Image Quality Adjusting Color [Color adjustment] HDMI Digital PC Component Analog PC You can adjust the color depth and hue of images for each primary color, red, green and blue. The color temperature can also be adjusted. Image adjustment Color adjustment Color Adjusts the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 93
this if the ambient light is low. M Select this if the ambient light is normal. H Select this if the ambient light is high. User's Manual Setting Functions from Menus Off Adjust Projects an image with no correction. You can specify the type and level (brightness) of the ambient light. Examples - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 94
Selecting an Image Quality Noise reduction [Advanced adjustment] - [Noise reduction] HDMI Digital PC Component Analog PC You can reduce image noise. Image adjustment Advanced adjustment Noise reduction Dynamic gamma [Advanced adjustment] - [Dynamic gamma] HDMI Digital PC Component Analog - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 95
image colors with RGB (red, green, blue) and CMY (cyan, magenta, yellow). Image adjustment Advanced adjustment 6-axis color adjust User's Manual Setting Functions from Menus Off Disables the memory color correction function. L M Specifies the intensity of the memory H color correction in - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 96
Selecting an Image Quality Detailed Gamma Correction [Advanced adjustment] - [Fine-Tune Gamma] HDMI Digital PC Component Analog PC The four gamma curves (white, red, green, blue) can be adjusted. When the white curve is adjusted, the adjustment is also applied to the other three colors. This - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 97
User's Manual Setting Functions from Menus Reducing the Lamp Brightness [Lamp mode] HDMI Digital PC Component Analog PC Reducing the lamp brightness reduces power consumption and cooling - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 98
this period of 30 seconds, it resumes projection. If no input signal is received for 30 seconds, it displays the countdown and turns off the projector after 5 minutes. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • During standby mode - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 99
Prohibiting Operations [Key lock] HDMI Digital PC Component Analog PC You can lock the projector to prevent its operation from either the side control or remote control. System settings Key lock User's Manual Setting Functions from Menus Off Disables the beep. On Enables the beep. Press the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 100
OK button and MENU button at the same time for 3 seconds. Ch1 Ch2 Ch3 Ch4 Independent Select the remote control channel to use with this projector. Remote controls set to any channel can be used. Press the OK button to accept your setting and then press the MENU button. • The factory - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 101
HDMI Digital PC Component Analog PC You can select whether to show or hide the guide screen which explains operations. System settings Guide User's Manual Setting Functions from Menus Use the buttons to select the menu language, then press the OK button. English German French Italian Spanish - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 102
Setting Various Functions Showing / Hiding the Input Status [Show Input Status] HDMI Digital PC Component Analog PC Select whether or not to show the input signal status on the screen when there is no signal or a signal has been set. System settings Show Input Status Selecting the HDMI Input - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 103
control, in standby state press the MENU button 3 times, then press the POWER button. User's Manual Setting Functions from Menus Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. Press the OK button to accept your setting - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 104
Setting Various Functions Registering a Password [Other settings] - [Register password] HDMI Digital PC Component Analog PC You can register a password for starting projection. System settings Other settings Register password Prohibiting Operation of the Lens [Other settings] - [Lens Ctrl - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 105
PC You can extend the menu display time from the normal setting of 30 seconds to 3 minutes. System settings Other settings Menu display time User's Manual Setting Functions from Menus Select [Lens shift Reset] and press the OK button. The following screen for confirmation appears. Use the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 106
the MENU button. When [On] is set, the [High temperature warning] icon shown below will be displayed when the temperature inside the projector is abnormally high. Off Deflicker adjustment is not performed. Adjust Select [Deflicker] to adjust. The following screen appears. Screen • [Off] is the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 107
. Otherwise, the lamp counter cannot indicate the correct timing for replacing the lamp. For details of lamp replacement, refer to page 161. User's Manual Setting Functions from Menus Select [Lamp counter] and press the OK button to display the lamp counter. Select [Reset] and press the OK button - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 108
Setting Various Functions Over 3,000 hours Displayed as a green, yellow and red bar. Select [OK] on the screen for confirmation and press the OK button to reset the lamp counter. Press the MENU button. ■ About the Display of the Lamp Counter The lamp counter displays the hours of use of the lamp - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 109
settings and restore the system settings to the factory defaults. System settings Other settings Factory defaults Setting Various Functions User's Manual Setting Functions from Menus Select [Factory defaults] and press the OK button. The following screen for confirmation appears. OK Settings - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 110
Model name Input signal Firmware Serial No. IP address* Gateway address* E-mail sender address* E-mail recipient address* Projector name* Location* System information ID Meaning WUX5000 or WUX4000 Details of the input signal currently selected Information such as the signal type, signal resolution - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 111
MULTIMEDIA PROJECTOR Installation Manual (Installation and Maintenance) Do not attempt installation yourself. Be sure to request installation from a qualified technician or contact the Canon Customer Support Center. 111 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 112
112 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 113
Installation 113 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 114
If the projector is subjected to excessive impacts during transportation, the lens unit may be damaged. Removal and installation of the lens unit should not be performed by the user. Be sure to have the procedure performed by a qualified technician or contact the Canon Customer Support Center. 114 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 115
, moisture in the air may condense on the projector lens and mirror, causing the image to become blurred. Wait until condensation evaporates and a normal picture is shown. ■ When Using the Projector at Altitudes Greater than 2,300 m Contact the Canon Customer Support Center if you intend to use this - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 116
lamp may be shortened, and it is necessary to change the settings of the projector. If using the projector for upward or downward projection, please contact the Canon Customer Support Center. ˃ ˃ Upward projection: Inclination of the projector should be no more than 10° from the vertical axis - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 117
Installation Manual Installation Installation Procedure Selecting the Projection Method and Installation Location (P118) Installing / Removing the Lens Unit (P119) Setting Up the Projector (P124) Connecting to AV Equipment (P128) Selecting an Input Signal (P48) Adjusting the Image (P50) Connecting - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 118
. For the ceiling attachment, refer to page 184 "Option". ■Adjusting the projection position when installed on the floor To adjust the projection position when the projector is installed on the floor, use the lens shift function (P60 and P126) to adjust up / down / left / right. You can also use the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 119
Installation Manual Installation Installing / Removing the Lens Unit ■Installing the projector and may cause an accident or personal injury. • Do not attempt to install or remove the lens unit yourself. Be sure to request this service from a qualified technician or contact the Canon Customer Support - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 120
lamp cover and temporarily fasten the screw. 4 Remove the sleeve screws (2 on top and 2 on bottom). After the 2 screws on top are removed, turn the projector upside down on a flat desk or similar location and remove the 2 screws from the bottom. 120 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 121
Installation Manual Installation Installing / Removing the Lens Unit 5 Then turn the projector back over and remove the sleeve. 6 Referring the following illustration, insert the lens connector of the lens unit into the front right side of the projector slowly until it contacts the end. At this - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 122
Installing / Removing the Lens Unit 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Return the sleeve, cosmetic panel, and lamp cover to illustration. When inserting the lens unit, it is possible to damage the lens cable between the lens unit and projector. 122 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 123
Installation Manual Installation Installing / Removing the Lens Unit ■Removing the Lens Unit 1 Perform steps 1 to 5 of "Installing the Lens Unit" (P119 - P121) and remove the sleeve. 2 Disconnect - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 124
screen easier to see. Screen Optical axis ■Relationship Between Image Size and Projecting Distance The projected image size is determined by the distance between the projector and the screen (projection distance) as well as the zoom. Refer to the table below and decide the distance between the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 125
Setting Up the Projector Installation Manual Installation Lens unit Diagonal when 16:10 (diagonal) 16:10 Width Height Image size (cm) 16:9 Width Height 4:3 Width Height Projection distance Wide limit Tele - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 126
Setting Up the Projector ■Lens Shift Function The projector includes a lens shift function. Operation of the buttons slides the lens up, down, left, and right, moving the image position. For the function operations, refer - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 127
Setting Up the Projector ˃ Moves right by up to approximately 10% of the image width. Installation Manual Installation At maximum rightward lens shift Area where lens movement is not possible With the Standard Zoom Lens and Long Zoom Lens, when the shift - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 128
DVI-D IN terminal can only be used to connect to a PC. Computer (P41) * Select playback mode before connecting. LAN terminal Network (P132) Service port (not normally used) AUDIO IN terminal AUDIO OUT terminal Audio signal for each image input (P39, P40, P43) Analog PC / Component Amplified - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 129
Installation Manual Installation Connecting to AV Equipment ■Connection Terminal and Connection Cable Input signal Input terminal Types of connection cables HDMI HDMI cable (not included) Digital PC - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 130
130 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 131
Connecting to a Network Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index 131 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 132
IP address is not overlapped with other computers that are on the same LAN. When you set the IP address of the projector, follow the instruction in "Configuring the Network from the Computer" (P142) on the web screen or refer to "TCP / IP Setting" (P141). • When you connect the computer to - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 133
Installation Manual Connecting to a Network Preparing the Remote Control Setting an Use the following IP address] and set the IP address and subnet mask. The factory default IP address for the projector is "192.168.254.254". Set an IP address which is different from this. Example IP address:192.168 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 134
mask, default gateway, etc). 6 Select [Use the following IP address] and set the IP address and subnet mask. The factory default IP address for the projector is "192.168.254.254". Set an IP address which is different from this. Example IP address:192.168.254.1 Subnet mask: 255.255.255 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 135
Installation Manual Connecting to a Network Preparing the Remote Control ■Windows XP 1 From the following IP address] and set the IP address and subnet mask. The factory default IP address for the projector is "192.168.254.254". Set an IP address which is different from this. Example IP address:192 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 136
, subnet mask, router, DNS server, etc.). 4 Create a new network environment and set the IP address and subnet mask. The factory default IP address for the projector is "192.168.254.254". Set an IP address which is different from this. Example IP address:192.168.254.1 Subnet mask: 255.255.255 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 137
Network Settings on the Projector From the projector menus screen, network settings can be configured on that they cannot be changed and cancel the lock. Network Setting Network setting lock Installation Manual Connecting to a Network Unlock Cancel the lock and allow other network settings to be - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 138
function Setting a Network Password [Network Password setting] You can set whether or not a password is required in order to change the projector network settings. Network Setting Network Password setting Off Disables the network function. On Enables the network function. Press the OK button to - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 139
using commands that meet PJLink standards. Network Setting PJLink Installation Manual Connecting to a Network When [Register Network Password] is (Japan Business Machine and Information System Industries Association). This projector supports all commands that are defined by PJLink Class 1, and - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 140
is an organization which was launched in 1960 and changed its name on April 1, 2002. Turning On / Off DHCP Function [DHCP] You can turn the projector DHCP function on and off. Network Setting DHCP Off Disables the DHCP function. TCP / IP settings are possible. On Enables the DHCP function. Searches - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 141
Setting TCP/IP setting Initializing Network Settings [Network setting initialization] You can initialize the projector network settings. Network Setting Network setting initialization Installation Manual Connecting to a Network When [TCP/IP setting] is selected, the window shown below appears - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 142
default IP address is "192.168.254.254". If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu. 3 Enter the user name and password on the password input screen, then click OK. The factory default user - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 143
power supply Faulty lens connector: Lens connector error Faulty air filter unit: Filter error Unknown error To operate the projector from the computer, click [Projector control] (P153). 4 To configure, click [Settings]. The settings window appears. Installation Manual Connecting to a Network 143 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 144
the displayed field (2) and click [OK] (3). (1) (2) (3) 6 A confirmation window appears. Check the contents and if they are correct, click [Apply]. The settings are applied to the projector and "Save completed" is displayed. 7 Click [Back to top] to return the web screen to the initial page. 144 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 145
Installation Manual Connecting to a Network Configuring the Network From the Computer ■Resetting to Factory Defaults 1 Perform steps 1 - 3 of "Displaying and Configuring the Network Configuration Screen" (P142) to - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 146
when sending a test mail. Failed to connect to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to a connection failure with the SMTP server or - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 147
and set basic network information. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Password User name New password Confirm new password TCP/IP DHCP IP address Subnet mask Default gateway - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 148
the SNTP server IP address in 1-byte numbers. Select the time zone where the projector is used. Enter the interval for resending mail when an error occurred (units: seconds default setting MailUserAccount [email protected] 0.0.0.0 25 0.0.0.0 (GMT) Dublin, Lisbon, London 10 3 OFF - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 149
is sent when an error occurs. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Mail authentication User name Password Confirm password POP3 server IP address POP3 server port number POP before - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 150
settings window (P148) is displayed. The sender name which was set from [Mail] in the settings window (P148) is displayed. The predetermined mail title "Canon Projector test" is displayed. ■SNMP Settings [SNMP] From [SNMP] in the settings window, you can configure the settings related to control of - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 151
"Displaying and Configuring the Network Configuration Screen" (P142). Installation Manual Connecting to a Network Item Projector name Location Explanation Factory default setting Enter the projector name in 1-byte alphanu- WUX5000 or WUX4000 meric characters and symbols (1 - 63 char- acters - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 152
Network ■Setting PJLink [PJLink] From [PJLink] in the setting window, you can set the PJLink functions which are the standard for projector management on a network. For the setting procedure, refer to "Displaying and Configuring the Network Configuration Screen" (P142). For information about PJLink - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 153
Installation Manual Connecting to a Network Controlling the Projector from a Computer When the projector is connected to a network, it is possible to control the projector from a computer via the network. 1 Turn on the computer and projector. 2 Launch a web browser, enter "http://(projector IP - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 154
Blank Mute Auto PC Information Explanation The name of the connected projector is displayed. (P151) The IP address of the connected projector is displayed. (P147) Refreshes the displayed contents with the most recent information. Turns projector power on or off. Select an input signal and click - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 155
Manual Connecting to a Network The messages shown in the following error list are sent when an error occurs in the projector . If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its Canon Customer Support Center. 155 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 156
156 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 157
Maintenance 157 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 158
. • Never use volatile cleaning liquid or benzine, as these may damage the finish of the projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower or lens cleaning paper. The lens surface is - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 159
the power plug. 2 Hook your finger onto the handle of the air filter on the side of the projector, and pull the air filter out to remove it. Air filter 3 Remove the filter from the air the handle side of the frame, then press the air filter into the frame. Installation Manual Maintenance 159 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 160
that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part No.: RS-FL01 Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 161
exceeds a certain amount of time, the following message (two types) is displayed for 10 seconds every time the projector is turned on. 2,700 hours to less than 3,000 hours Prepare the new lamp when this screen is displayed ] in the [System settings] menu. (P107) 161 Installation Manual Maintenance - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 162
uses the following lamps. Lamp part No.: RS-LP06 (WUX4000) RS-LP07 (WUX5000 / WUX4000) Contact the Canon Customer Support Center when purchasing a replacement lamp. When replacing the lamp, turn off the projector, wait until the cooling fan stops, disconnect the power plug from the AC outlet - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 163
the lamp cover and tighten the screws. 6 Turn on the power. Bring up the menu and select [System settings] - [Other settings] - [Lamp counter]. 163 Installation Manual Maintenance - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 164
Replacing the Lamp 7 Select [Reset] - [OK] to reset the lamp counter. • It is recommended that you also replace the air filter when you replace the lamp. • Contact the Canon Customer Support Center for further information. • Replacement air filter product number: RS-FL01 164 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 165
MULTIMEDIA PROJECTOR Appendix 165 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 166
166 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 167
Appendix 167 Appendix Installation Manual User's Manual Table of Contents Safety Instructions Before Use Projecting an Image Useful Functions Available During a Presentation Setting Functions from Menus Installation Connecting to a Network Maintenance Appendix Index - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 168
Troubleshooting LED Indicator Meanings When there is a problem with the projector, the LED indicator on the side of the projector illuminates or flashes continuously after the projector may be a malfunction in the projector. Contact the Canon Customer Support Center. WARNING and Faulty lamp LAMP - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 169
is blocking the air intake or exhaust vent and contact the Canon Customer Support Center. The lens connector that connects the lens unit with the main unit of the projector is disconnected. Contact the Canon Customer Services Center. Check whether the air filter is installed correctly. (P159) ■You - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 170
Troubleshooting Cause No input signal type has been selected. The image signal type is incorrect. The BLANK function has been selected. No image is projected due to a problem control. (P68) Turn first the projector and then the computer off and information, refer to the manual that came with your - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 171
Troubleshooting ■The Projected Image Is Blurred Cause Countermeasure The image is out of focus. Adjust the focus. (P59) The distance to the screen is too short. Check whether the distance to the screen is appropriate. If the distance is shorter than approximately 1.3 m (4.3'), the projector - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 172
the operating temperature is between 5°C and 35°C. (P22) If you use the projector at 2300 m or higher above sea level, contact the Canon Customer Support Center. The projector may be damaged. Contact the Canon Customer Support Center. ■You Cannot Operate the Remote Control Cause Batteries are not - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 173
Relationship between Aspect and Screen Aspect This section describes the relationship between screen aspect (P52) and aspect (P56). To project an image on the whole screen, select the most appropriate screen aspect ratio and aspect according to the aspect ratio of the screen and input signal type. - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 174
Relationship between Aspect and Screen Aspect Using Screen Screen aspect ratio setting PC Resolution of screen WUXGA 16:10 WSXGA+, WXGA+ 16:10 WXGA [4:3] [4:3 D. image shift] UXGA 4:3 SXGA+, XGA, SVGA, VGA 4:3 SXGA 5:4 Purpose of projection Aspect setting Project an image in the - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 175
.000 60.000 50.000 60.000 50.000 60.000 * The specifications in the table above are subject to change without notice. * This projector does not support any computer output signal with a dot clock of 162 MHz or higher. * Use a VGA cable in which all pins are connected. If the cable - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 176
Product Specifications ■ Projector Model name Display system Optical system Type WUX5000 WUX4000 RGB liquid remote control dry-cell batteries, power cord, PC connection cable, User's Manual / Installation Manual, warranty certificate *1 When using a Standard Zoom Lens (RS-IL01ST). Varies - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 177
Product Specifications ■Remote control Power supply DC 3.0V, using two AAA-size batteries Operating range Dimensions Weight (not including batteries) Approx. 8 m± 25° horizontal and vertical (to infrared remote receiver) 43 mm (W) x 23 mm (H) x 135 mm (D) / 1.7 (W) x 0.9 (H) x 5.3 (D) in. 56 g - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 178
Product Specifications ■External View 9911mmmm (3.5'') 115500mmmm (5.9'') 92 mm 92(3m.6m'') 43403m0mmm(16.9'') 38308m0mmm(15.0'') Bolt holes (M4 x 6) for installation of ceiling attachment 1281m28mm(5m.0'') 2342.354m.5mm(m9.2'') 53 mm 5(32m.1m'') 21221m2mm(m8.4'') (6.1'') 11441.1.55mmmm - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 179
■Service Port (CONTROL) Pin assignment Product Specifications Pin No. 1 2 3 4 5 6 7 8 9 Signal OPEN RxD TxD OPEN GND OPEN OPEN OPEN OPEN Communication format Communication mode : RS-232-C, asynchronous, - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 180
Product Specifications Commands ASCII representation Image mode USER 1 IMAGE=USER_1 USER 2 USER 3 IMAGE=USER_2 IMAGE=USER_3 USER 4 IMAGE=USER_4 Image mode acquisition Brightness Brightness acquisition Sharpness Sharpness acquisition Contrast Contrast acquisition Aspect USER - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 181
Product Specifications 181 Appendix Other Information - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 182
74 Displaying logo 87 DVI 40, 48, 129 DVI-D IN 40 DVI-D IN Terminal 34 Dynamic gamma 94 F Factory defaults 109 FOCUS 59 FREEZE 68 G Guide 101 H HDMI 41, 42, 48, 129 HDMI color space 82 HDMI IN Terminal 34, 41, 42 HDMI input level 82 HDMI over scan 83 Horizontal - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 183
103 PJLink 139 POWER 45, 66, 98 Power Management 46 Power management mode (settings) .... 98 Power Saving (Power Management) ..... 46 Progressive 83 Projector on 87 P-TIMER 71 R Rear projection 85 Register Network Password 139 Register password 104 Remote control 26, 30, 100 Reset 97, 109 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 184
RS-LP07 (WUX5000 / WUX4000) manual provided with the ceiling attachment RS-CL11. • Installing / Removing the Lens Unit It is possible to use the projector by replacing the lens unit. Regarding installation and replacement of the lens unit, contact a qualified technician or the Canon Customer Support - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 185
Rear Rear, Ceiling mounted User screen settings P78 No signal screen Black P86 Blue* Screen when blank Black * P86 Blue P78 Projector on Return Skip P87 Canon logo* Screen aspect 16:10* P87 16:9 4:3 16:9 D. image shift 4:3 D. image shift P79 P79 P80 P80 P81 P81 P82 P82 P83 - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 186
Menu Configuration Image Adjustment Menu Image mode COMMON P88 Standard * Photo/sRGB User 1 - 5 (as creating profile) Digital PC / Analog PC P88 Presentation VividPhoto Component / HDMI P88 Dynamic Video Cinema Advanced adjustment Ambient light Off * Adjust Type Level P93 Tungsten - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 187
Menu Power management mode Direct power on Beep Key lock Remote control Language Guide Off * P98 Standby Exit Off * P98 On Off P99 On * IP address Gateway address E-mail sender address E-mail recipient address Projector name Location System information ID P105 *: Factory defaults (setting - Canon 1293B002AA/006AA | Multimedia Projector WUX5000 / WUX4000 User's Manual - Page 188
, Lake Success, NY 110421198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
Installation
Connecting to a Network
Maintenance
Appendix
Index
Appendix
Installation Manual
Projecting an Image
Safety Instructions
Before Use
Table of Contents
Setting Functions from Menus
Useful Functions Available
During a Presentation
User’s Manual
ENG
MULTIMEDIA PROJECTOR
User’s Manual /
Installation
Manual