Canon 2455B002 User Manual

Canon 2455B002 Manual

Get Canon 2455B002 PDF manuals and user guides View all Canon 2455B002 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon 2455B002 manual content summary:

  • Canon 2455B002 | User Manual - Page 1
    . 1 Back Next Page Introduction Contents Chapter 1 Before Using the Scanner Chapter 2 Setup Chapter 3 Basic Operation Chapter 4 ISIS/TWAIN Driver Settings Chapter 5 Job Registration Tool Settings Chapter 6 Maintenance Chapter 7 Troubleshooting Chapter 8 Appendix INDEX DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 2
    The targeted products are office equipment, such as computers, monitors, printers, fax, machine, copiers, and scanners. The standards and logos are uniform among participating nations. Trademarks y Canon and the Canon logo are registered trademarks of Canon Inc. in the United States and may also be
  • Canon 2455B002 | User Manual - Page 3
    Introduction 3 Symbols Used in This Manual 3 Chapter 1 Before Using the Scanner 5 1. Important Safety Instructions 5 Installation Location 5 AC Adapter 6 Moving the Scanner 6 Handling 7 Disposal 8 2. Features of the DR-2010C/DR-2510C Document Scanner 8 3. Names and Functions of Parts
  • Canon 2455B002 | User Manual - Page 4
    7 Troubleshooting 72 1. Troubleshooting 72 2. Uninstalling Software 75 Uninstalling the ISIS/TWAIN Driver and Job Registration Tool 75 Uninstalling CapturePerfect 3.0 76 Chapter 8 Appendix 77 Specifications 77 Replacement Parts 78 External Dimensions 79 INDEX 81 4 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 5
    read the safety warnings and precautions described below. 1. Important Safety Instructions 5 Installation Location 5 AC Adapter 6 Moving the Scanner 6 Handling 7 Disposal 8 2. Features of the DR-2010C/DR-2510C Document Scanner 8 3. Names and Functions of Parts 10 Installation Location The
  • Canon 2455B002 | User Manual - Page 6
    with both hands to avoid dropping it. The scanner weighs approximately 5.3 lb (2.4 kg). • Make sure to disconnect the interface cable and AC adapter before moving the scanner. If the scanner is transported with these items connected, the plugs and connectors may be damaged. 6 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 7
    power switch OFF, and disconnect the power plug from the power outlet. Then, contact your local authorized Canon dealer or service representative to have the unit serviced. • Before moving the scanner, be sure to turn the power switch OFF, and disconnect the power plug from the power outlet CAUTION
  • Canon 2455B002 | User Manual - Page 8
    of the DR-2010C/DR-2510C document scanner are described below. „ Compact Size The dimensions of the scanner are as scanner supports Hi-Speed USB 2.0. „ Color/Grayscale Support Documents can be scanned in 24-bit color or 256-level grayscale. „ Supports a Variety of Scanning Modes The scanner supports
  • Canon 2455B002 | User Manual - Page 9
    Duplicating Paper The scanner is able to scan carbonless duplicating paper. „ Sleep Mode The scanner is designed to save energy by entering the sleep mode when it is not scanning documents. NOTE Some functions may not be available depending on the software you are using. 9 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 10
    paper jams and cleaning the scanner. (See p.33 and p.65) Document Feeder Place the document to scan here. OPEN button Use to open the front unit. Document Guides Adjust these guides to fit the width of , such as invoices, without separating them (bypass mode) (See p.23). 10 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 11
    Software 12 Setup Disc 12 Software Installation 13 Connecting the Scanner to the Computer 15 3. Turning the Power ON 16 Scanner Recognition 16 11..SSccanannenreSrysStyesmteRmeqRuiereqmueirnetms ents To use the DR-2010C/DR-2510C scanner that meets the following specifications: y CPU: Pentium
  • Canon 2455B002 | User Manual - Page 12
    The following software is included on the DR-2010C/DR-2510C Setup disc. • DR-2010C/DR-2510C Driver The scanner driver for using the DR-2010C/DR-2510C. • CapturePerfect 3.0 An ISIS compatible application developed for use with Canon document scanners. NOTE The Setup disc of the DR-2010C/DR-2510C is
  • Canon 2455B002 | User Manual - Page 13
    it. NOTE When you select [Typical Installation], all of the displayed software and the User Manual will be installed automatically. If you want to reinstall only specific software that you have previously uninstalled, select [Custom Installation] and specify the software. 13 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 14
    7 When the driver installation is complete, click [Finish]. Contents Back Previous Page Next Page 10 Confirm the installation location → click [Next]. 3.0 installation is complete, click [Finish]. 9 Read the license agreement → click [Yes] to accept it. 12 Click [Next]. 14 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 15
    the computer, verify that the power switch of the scanner is OFF. If the power switch is in the ON position, push the switch to set it to OFF. 1 Verify that the power switch of the scanner is OFF (O side). 15 Remove the DR-2010C/DR-2510C Setup disc from the CD-ROM drive. 2 Connect
  • Canon 2455B002 | User Manual - Page 16
    the AC outlet for safety. Scanner Recognition The scanner will be recognized the first time it is connected to the computer. 1 Make sure that the scanner and computer are connected properly. 2 Press the power switch on the back of the scanner to turn the scanner ON (I side). 16 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 17
    recognizes the DR-2010C/DR-2510C as new hardware. Contents Back Previous Page Next Page NOTE If you set the power switch on the back of the scanner to [AUTO], the scanner is linked to be automatically turned ON/OFF in accordance with the power of the computer. 17 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 18
    35 Setting the Long Document Mode 35 11..DDoocucmumenetsnts The scanner can scan documents ranging in size from business cards and checks to LTR .2" (1000 mm) long by setting the scanner to the Long Document mode. (See "Setting the Long Document Mode," on p. 35.) 18 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 19
    a time. • Scanning documents before the ink is dry can cause problems with the scanner. Always make sure that the ink on a document is dry before In this case, adjust the scanning intensity in the application software before scanning the document. • It is recommended that thin DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 20
    document stopper that corresponds with the length of the document you want to scan. Preparing the Document Eject Tray Open the document eject tray. 20 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 21
    2 Adjust the document guides to fit the width of the document to be scanned. IMPORTANT There is a load limit mark ( ) on the document guides. Do not stack documents higher than this mark (approximately 50 sheets of 20 lb bond (80 g/m2) paper.) Doing so may cause a paper jam. 21 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 22
    guides 6 Use the application software to start scanning. feeder. If the leading edge of a document is curled, it may cause a paper jam. • If feeding stops due to a system error or paper jam while the scanner is scanning, resolve the problem scanner while it is not being used. 22 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 23
    tray to prevent damage to the scanner while it is not being used. Placing Cards 1 Switch the feed selection lever to (Bypass). 2 Adjust the document guides to fit the width of at a time. 2 Adjust the document guides to fit the width of the card to be scanned (See p.21). 23 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 24
    function, fold the document in half lengthwise and place it into the feeder. The DR-2010C/DR-2510C will scan both sides and combine the scanned images into a . • Adjust the document guides to fit the width of the document. Otherwise, the image may scan as skewed or shifted. 24 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 25
    scanning with the DR-2010C/DR-2510C, in addition to scanning from an application, you can also use the Job function to perform scanning by pressing a scan button. This section describes the procedures for scanning using the CapturePerfect 3.0 software included with the scanner, scanning using the
  • Canon 2455B002 | User Manual - Page 26
    . For more information on scan settings, see Chapter 4. "ISIS/TWAIN Driver Settings." NOTE If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners, re-install the ISIS/TWAIN driver (See "2. Installing the Software," on p. 12.). 4 Select the default page size from the drop
  • Canon 2455B002 | User Manual - Page 27
    can be assigned to specific job buttons using driver, and is used for registering the jobs that are executed when a job button is pressed. 1 From the Windows task bar, click [Start] → point to [All Programs] → [Canon DR-2510C] or [Canon DR-2010C] → click [Job Registration Tool]. 27 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 28
    ] dialog box. Using the Scan Panel The Scan Panel is an application that is installed with the ISIS/TWAIN driver. It is displayed in the system tray when the DR-2010C/DR-2510C driver is started. If Feeding Option in the scan settings is set to [Panel-Feeding] or [Automatic Feeding], the Scan Panel
  • Canon 2455B002 | User Manual - Page 29
    color image or black and white image accordingly. Click the [Basic] tab in the settings dialog box, and then click [Auto Color Detection] in the [Mode] box. For more information on setting the scanning conditions, see Chapter 4, "ISIS/TWAIN Driver Settings - Auto Color Detection." 29 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 30
    setting the scanning conditions, see Chapter 2, "Using the Scanner - Scanning Different Sized Documents," in the Reference Guide. X Skipping Blank Pages You can set the scanning Folded Documents" (p. 24) and Chapter 4, "ISIS/TWAIN Driver Settings - Scanning Side Settings." 30 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 31
    black and white scanning. Click the [Image processing] tab in the settings dialog box, and then click [Red Enhance] in the [Color drop-out] box. For more information on setting the scanning conditions, see Chapter 4, "ISIS/TWAIN Driver Settings - Enhancing the Red Color." 31 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 32
    Guide. 55..PPrarcatcictaicl EaxlaEmxpalmesples This section provides examples of settings when scanning with the DR-2010C/DR-2510C. Refer to these examples when specifying ISIS/TWAIN driver ] box. When this option is selected, the scanner detects documents and starts scanning as they are loaded
  • Canon 2455B002 | User Manual - Page 33
    box, and click [Auto] in [Batch Separation]. (Only for the ISIS driver.) • To scan a batch of documents one page at a time Click [ you selected [Automatic Feeding] in the [Feeding Option] box, the scanner detects when the next document is placed and continues scanning. If you 33 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 34
    recovery system] is enabled in the [Others] tab of the ISIS/TWAIN driver settings dialog box, the image data of the document is not saved and it out, make sure to remove any remaining pieces from inside the scanner. 4 Close the front unit by gently pushing it up on both 34 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 35
    DR-2010C/DR-2510C is normally 14.02" (356 mm), but you can scan documents up to 39.2" (1000 mm) long by setting the scanner driver properties dialog box and set the paper size to [Auto-detection] to allow the scanner to -click [CANON DR-2010C USB] or [CANON DR-2510C USB] → click [Properties]. 1
  • Canon 2455B002 | User Manual - Page 36
    4 Click the [Maintenance] tab → [Long Document Mode (1,000 mm)]. Contents Back Previous Page Next Page 5 Click [Apply] → [OK]. 6 Turn the scanner OFF and then ON again. 36 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 37
    DR-2010C/DR-2510C must first be selected as the scanner to be used. This section describes how to select the scanner using CapturePerfect 3.0. 1. Before Using the Scanner 37 2. ISIS/TWAIN Driver Properties Dialog Box 38 Scan Mode Settings 39 Auto Color Specific Color 50 Enhancing the Red Color
  • Canon 2455B002 | User Manual - Page 38
    Contents Back Previous Page Next Page NOTE If [Canon DR-2510C] or [Canon DR-2010C] is not displayed in the list of scanners, reinstall the ISIS/TWAIN driver. (See "Chapter 2 Setup - 2. Installing the Software," on p. 12) 4 Select the default page size from the drop-down list → click [OK]. 22..
  • Canon 2455B002 | User Manual - Page 39
    setting the scan mode to suit your needs. 1 In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab → select the scanning mode Color Detection] is enabled. In that case, [Auto Color Detection] should be disabled. y For details, See "Auto Color Detection," on p. 40. 39 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 40
    setting towards "High" when you want to scan a color document with low color saturation as a black-and-white document. y Proportion of Color: change the setting towards "High" when you want to scan a colordocument with a low proportion of color as a black-and-white document. 40 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 41
    Settings] dialog box • Depending on the application, operation may become unstable when [Auto- detection] is enabled. In that case, [Auto-detection] should be disabled. 41 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 42
    describes the procedure for setting the page side settings for scanning. 1 In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab → select the page side to scan from the front side of documents loaded into the feeder. - [Duplex] Scan both sides of documents. 42 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 43
    Image Skewing This section describes the procedure for setting the scanner to detect slanted document pages and straighten the scanned images. 1 In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab → to be lost in other cases, depending on the document. 43 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 44
    that may appear when scanning color documents or scanning in grayscale. 1 In the ISIS/TWAIN driver properties dialog box, click the drivers: for the TWAIN driver, one of two dialog box types is displayed depending on the application program used. Scan Area Dialog Box (ISIS Driver) 44 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 45
    , reduce the scanning area by moving the slider to the left. → The measurement units for margins are determined by the [Unit] setting. Preview Button (TWAIN driver only) Click the [Preview] button to scan one document page and display its preview image in the Area window. 45 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 46
    brightness and contrast for scanning. 1 In the ISIS/TWAIN driver properties dialog box, click the [Brightness] tab → adjust II { { − − 256-level Gray { { { { 24-bit Color { { { { Auto Color Detection { { { { {: Available for setting − : Not available for 46 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 47
    TWAIN driver color for the custom setting. y The color bar and color of the sample image are changed to show the specified color. 47 NOTE When the [Custom] check box in the [Gamma Settings] dialog box is selected, all settings on the [Brightness] tab sheet are set automatically. DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 48
    section describes the procedure for rotating the orientation of the scanned image. 1 In the ISIS/TWAIN driver properties dialog box, click the [Image processing] tab → adjust the [Edge emphasis] slider to ) 0 degrees 90 degrees 180 degrees 270 degrees Scanned Image 48 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 49
    /TWAIN driver properties support text orientation recognition. Please disable [Text Orientation Recognition] if your application program operates abnormally when it is enabled. 2 Adjust the [Removal level] slider to set the level of bleed through prevention or background removal. 49 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 50
    Page Next Page Omitting a Specific Color This section describes the procedure for setting to omit borders and ruled lines of a specified color (red, green, or blue) from the scanned image. Enhancing the Red Color This section describes the procedure for setting the scanner to enhance the red
  • Canon 2455B002 | User Manual - Page 51
    setting the system recovery method used by the scanner when document feeding stops due to a paper jam or other error during scanning. 1 In the ISIS/TWAIN driver properties dialog box, click the [Others] tab -feeding may not be able to be detected correctly using ultrasonic. 51 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 52
    Option]. Batch Separation (ISIS driver only) When the separation timing guide position. [Automatic Feeding] This feeding method is good for scanning batches of same-size documents: scanning starts when the scanner detects loaded documents, and stops when you press the Stop button. 52 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 53
    using the sliders or up/down buttons → click (Start) to save the scanned image. 1 In the ISIS/TWAIN driver properties dialog box, click the [Others] tab → select the [Prescan] check box. 2 Specify the location, file scanning is complete, the Prescan dialog box is displayed. 53 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 54
    the version of the ISIS/TWAIN driver you are currently using. 1 In the ISIS/TWAIN driver properties dialog box, click the [Basic] tab → click [About]. 3 Enter a name for [Save user preference as] → click [OK]. 2 Check the content of the [About] dialog box → click [OK]. 54 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 55
    a TWAIN-compliant application program that installs with the ISIS/TWAIN driver. Use the following procedure to start the Job Registration Tool. Windows task bar, click [Start] → point to [All programs] → [Canon DR-2510C] or [Canon DR-2010C] → click [Job Registration Tool]. 55 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 56
    on the scanner, showing their currently assigned settings. Clicking on the job buttons (c, d and e) or Print [New/Editing] in the [Editing] menu opens the [New/Editing] dialog box. [Close] Button Closes the [Job Registration Tool] dialog box. 56 Job Buttons Attach to E-mail DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 57
    the [Scan Panel] dialog box. „ Function Select the function to set for each job. When you change functions, the [New/Editing] dialog box is changed. DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 58
    can press the [Setting] button to specify scanner settings. Settings to Save Image Files NOTE For more information on the scanner settings, see Chapter 4, "ISIS/TWAIN Driver Settings." „ [Save Image] Check Box dialog box when the [TIFF] or [PDF] file format is selected. 58 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 59
    of JPEG compression is applied. - If your application program does not support the above compression formats, you may be unable to open scanned The Compression rate setting is enabled when the scanner is set to [256-level Gray] or [24-bit Color] mode. When the [Black and White] DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 60
    . y Select [Fit to paper] if the scanned documents are larger than the printer paper, to resize the images to the printer paper size. „ Buttons [OK] Button Click this button to accept the setting changes by registering the folder number and specifying a warning size. 60 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 61
    appears, follow the instructions in the message to either continue scanning or change the save destination before continuing scanning. Monitor Job Dialog Settings „ [Show Monitor Dialog] Check Box Select this check box to display the [Monitor for DR-2510C] or [Monitor for DR-2010C] dialog box to
  • Canon 2455B002 | User Manual - Page 62
    the Document Holding Guide 69 Resetting the Counter 70 CAUTION • When cleaning the scanner and the inside of the scanner, turn OFF the scanner. After finishing a large scanning job, turn OFF the scanner and then clean out any paper particles remaining inside the scanner. 62 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 63
    the sensor glass, contact your local c authorized Canon dealer or service representative. 3 Use compressed air to remove dust and paper particles from the inside of the scanner. 5 Clean the c rollers by wiping the and then use a dry, soft cloth to wipe away any moisture. 63 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 64
    Wipe the document holding guide with a cloth that has been dampened with water and thoroughly wrung out. Document Holding Guide 10 Reattach the retard scanner to clean them, and make sure to reattach them to the scanner when cleaning is finished. 12 Close the document feed tray. 64 DR-2010C / DR
  • Canon 2455B002 | User Manual - Page 65
    Do not use excessive force when removing or attaching the rollers and document holding guide. Doing so many damage them. Roller Replacement Cycle When the rollers have (feeding roller, retard roller,) contact your local authorized Canon dealer or service representative. d c 65 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 66
    the roller with the shaft on the main unit. 4 Lift up the roller fixing lever (c), and slide it to the left (d). 2 Slide the roller fixing lever to the right to lock the roller into the hole on the left of down the lever to lock the shaft of the feeding roller into place. 66 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 67
    p. 20). 2 Press the OPEN knob from both sides (c), and pull the front unit out and downward to open it (d). 6 Close the document feed tray. d c 67 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 68
    the roller with the shaft on the front unit. 4 Lift up the roller fixing lever (c), and slide it to the right (d). 2 Slide the roller fixing lever to the left to lock the roller into the hole on the left of down the lever to lock the shaft of the feeding roller into place. 68 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 69
    cover, and slide the document holding guide backwards to remove it. 6 Close the document feed tray. Attaching the Document Holding Guide 1 Fit the hooks (four) of the document holding guide onto the roller cover, and slide the document holding guide forwards to attach it. 69 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 70
    with the Category View, switch to Classic View. 3 Double-click [Scanners and Cameras]. 2 Double-click [Printers and Other Hardware] in the working field → click [Scanners and Cameras]. 4 Right-click [CANON DR-2510C USB] or [CANON DR-2010C USB] → click [Properties]. Control Panel (Category View
  • Canon 2455B002 | User Manual - Page 71
    5 Click the [Maintenance] tab → [Reset]. Contents Back Previous Page Next Page 6 Confirm that the counter for the selected roller is set to 0 → click [OK]. 71 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 72
    7 Troubleshooting 1. Troubleshooting 72 2. Uninstalling Software 75 Uninstalling the ISIS/TWAIN Driver and Job Registration Tool 75 Uninstalling CapturePerfect 3.0 76 11..TTroroubulbelsehsohotoinogting This section describes the possible problems that might occur during use of the scanner and
  • Canon 2455B002 | User Manual - Page 73
    your local authorized Canon dealer or service representative for more information. The scanner does not support the USB cable. Use the USB cable provided with the scanner. The USB hub is not compatible with the scanner. Remove the USB hub. × Slow Scanning Speed The following problems might cause
  • Canon 2455B002 | User Manual - Page 74
    glass and rollers, the scanning glass inside the scanner may be scratched. Contact your local authorized Canon dealer or service representative. Symptoms Problem Solution The scanned image is abnormal in some applications. A function not supported by the application was used. Some applications do
  • Canon 2455B002 | User Manual - Page 75
    1 From the Programs list, click [Canon DR-2510C Driver] / [Canon DR2010C Driver] (or [DR-2510C Job Tool] / [DR-2010C Job Tool]) → click [Remove]. 2 Double-click [Add or Remove Programs]. NOTE If you clicked [DR-2510C Job Tool] / [DR-2010C Job Tool], click [Change/ Remove]. 75 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 76
    2 Click [Yes] in the [DR-2510C Setup] / [DR-2010C Setup] dialog box. NOTE To remove the Job Registration Tool, click [Yes] in the [Confirm File Deletion Shared File?] dialog box → click [Yes]. After the uninstallation procedure is complete, click [OK]. 3 Click [Finish]. 76 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 77
    4 3.2 GHz CPU, 1 GB memory, LTR/A4 document size) Black and White Simplex 200 x 200 dpi 25 pages/min.(DR-2510C), 20 pages/min.(DR-2010C) 300 x 300 dpi 25 pages/min.(DR-2510C), 20 pages/min.(DR-2010C) Duplex 200 x 200 dpi 50 images/min.(DR-2510C), 40 images/min.(DR-2010C) DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 78
    document holding guide, see "Removing/ Attaching the Document Holding Guide," on p. 69. z Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts. Product specifications are subject to change without notice. 78 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 79
    External Dimensions 11.7" (298mm) Contents Back Previous Page Next Page 6.3" (160mm) 9.8" (245mm) (With the document feed tray open) 6.3" (160mm) 19.5" (490mm) 79 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 80
    WEEE scheme or your household waste disposal service. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com. (EEA: Norway, Iceland and Liechtenstein) MODEL NAMES Model DR-2010C is identical to model M11065. Model DR-2010C is the sales name of model
  • Canon 2455B002 | User Manual - Page 81
    feeder 10 Document guides 10 Document holding guide Attaching 69 Removing 69 Documents ...18 Placing ...21 Double feed detection 51 Driver location 5 Introduction ...3 ISIS/TWAIN Driver Properties Dialog Box 38 Auto color detection 40 Background, removing 49 ...10 81 DR-2010C / DR-2510C
  • Canon 2455B002 | User Manual - Page 82
    Moire, reducing 31 Saving text data for keyword search 32 Security setting for PDF 32 Skipping blank pages 30 Text orientation, correcting 31 Specifications 77 System requirements 11 T Troubleshooting 72 Typical Installation 13 U USB connector 10 USB Link switch 8 82 DR-2010C / DR-2510C
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Back
Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
User Manual
Document Scanner
♦
Please read this manual before operating
this scanner.
♦
After you finish reading this manual, store
it in a safe place for future reference.
1
Introduction
Contents
Chapter 1 Before Using the Scanner
Chapter 2 Setup
Chapter 3 Basic Operation
Chapter 4 ISIS/TWAIN Driver Settings
Chapter 5 Job Registration Tool Settings
Chapter 6 Maintenance
Chapter 7 Troubleshooting
Chapter 8 Appendix
INDEX
Cover