Canon 9320A010 EOS Utility 2.8 for Macintosh Instruction Manual
Canon 9320A010 - EOS Rebel XSi Starter Manual
UPC - 660685005242
View all Canon 9320A010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon 9320A010 manual content summary:
- Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 1
Instruction Manual O Content of this Instruction Manual O EU is used for EOS Utility. O Camera model is displayed as an icon. Example: EOS-1D Mark IV J 1D Mk IV O displays the relevant camera model. O In this manual Shooting 4 Preferences Reference Index © CANON INC. 2010 CT1-7185EUME-001 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 2
WHOLE OR IN PART, EXCEPT AS support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 3
Mac OS X 10.5.8. Supported Camera Can be used for RAW images, JPEG images or MOV movies shot with the cameras below. EOS-1D Mark IV EOS-1D Mark III EOS 7D EOS 40D EOS REBEL T1i/500D EOS DIGITAL REBEL XS/1000D EOS-1Ds Mark III EOS 5D Mark II EOS 50D EOS REBEL T2i/550D EOS DIGITAL REBEL XSi/450D - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 4
aspect ratio and shoot O To shoot with another image displayed as overlay to align several images at the same angle O To shoot by operating the camera O To shoot movies O To shoot with timer O To shoot with flash ¿ p.26 ¿ p.37 ¿ p.37 ¿ p.38 ¿ p.40 ¿ p.40 ¿ p.49 ¿ p.51 Functions for use with other - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 5
camera and computer), starting up EU, downloading images from your camera to your computer and quitting EU are explained here. Connecting the Camera and Images Using Digital Photo Professional ..... 9 Downloading Images Using ImageBrowser 9 Downloading Images without Using Canon Software..... 9 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 6
Manual. 2 Connect the small plug of the cable into the terminal on your camera. O Once the plug is connected to the camera according to the steps for your camera model facing the front of the camera, connect it to the camera's < > terminal or terminal. 2Camera Settings 3Remote - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 7
then displayed in the main window of Digital Photo Professional (RAW image processing, viewing camera and download images saved on the memory card inserted in the camera to your computer. Refer to your camera's Instruction Manual for details. O REBELT1i 500D cannot communicate with EU if the camera - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 8
images in DPP. For details on using DPP, refer to the "Digital Photo Professional Instruction Manual" (PDF electronic manual). O Continue with "Quitting EU" (p.10). Downloading Selected Images to Your Computer From the images saved in your camera's memory card, you can select the ones you want and - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 9
2 View the images and checkmark images to download. Viewer window Add check mark 3 Click the [Download] button. 4 Specify the save destination and then click the [OK] button. Displays the save destination on the computer Download image dialog box Introduction Contents at a Glance 1 Downloading - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 10
Preview] window allows you to quickly review the downloaded images. You can card reader. However, EU does not support image downloading using a card reader. instructions, refer to "Downloading Images Using Your Card Reader" in the "Digital Photo Professional Instruction Manual" (PDF electronic manual - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 11
Quitting EU 1 Click the [Quit] button. ¿ The window closes and EU quits. 2 Turn the camera's power switch to < OFF >. 3 Disconnect the cable from the camera and computer. O Do not pull on the cable; hold the plug and pull out. Introduction Contents at a Glance 1 Downloading Images 2Camera Settings - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 12
Your Computer This section explains how to set the camera's functions from EU. Setting the Camera Owner's Name, Copyright Notice and Date/Time 12 Available Settings by Camera Model 13 Setting up Camera Functions 14 Available Settings by Camera Model 15 Setting Picture Styles and Applying to the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 13
/time recorded as shooting information in shot images. 3 Click the [ ] button. Capture window 1 Connect your camera and computer, and then start up EU (p.5). 2 Click [Camera settings/Remote shooting]. ¿ The capture window appears. Introduction Contents at a Glance 1 Downloading Images 2Camera - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 14
are displayed for the camera that is connected. For more details, refer to "Available Settings by Camera Model" (Description on the version of the camera's firmware. O You can update the firmware by clicking on this item. O For more details on updating firmware, refer to the Canon's website. *1 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 15
Styles, personal white balance, JPEG quality and white balance adjustment. 1 Connect your camera and computer, and then start up EU (p.5). 2 Click [Camera settings/Remote shooting]. 3 Click the [ ] button. ¿ The capture window appears. ¿ The [Shooting menu] appears. Introduction Contents - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 16
4 Click the required setting and specify each one. Shooting menu O Available settings are displayed for the camera that is connected. For more details, refer to "Available Settings by Camera Model" (Description on the right). For a list of the capture window functions, refer to p.70. Available - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 17
Style and register up to three of your own Picture Styles in the camera as userdefined settings. You can also register Picture Style files in the camera as user-defined settings you have downloaded from the Canon's website or created with Picture Style Editor (Picture Style file creating software - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 18
by clicking the pointer on the slider for each item. 3 Click the [Return] button. ¿ The settings are applied to the camera, and the display returns to the [Shooting menu]. Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Cursor - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 19
You can register up to three Picture Style files downloaded from the Canon's website or created with PSE and saved to your computer, as user-defined settings in your camera. 1 Click [Register User Defined style]. ¿ The [Register User Defined style] dialog box appears. 2 Select a tab from one of - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 20
of Picture Style. For more details on Picture Style files, refer to the Canon's website. O The Picture Style files that you can apply to the camera are files with the ".PF2" extension only. O For details on using PSE, refer to the "Picture Style Editor Instruction Manual" (PDF electronic manual). 19 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 21
, start up RAW Image Task from ImageBrowser. For more information on RAW Image Task, refer to the "ImageBrowser Instruction Manual" (PDF electronic manual). Registering Personal White Balance in the Camera 1D Mk IV 1Ds Mk III 1D Mk III 40D White balance files created by adjusting the white balance - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 22
the White Balance" ( 1D Mk IV 1Ds Mk III 1D Mk III ) or "Setting the White Balance" ( 40D ) in the camera's Instruction Manual provided with your camera. Setting JPEG Quality and Applying to the Camera 1D Mk IV 1Ds Mk III 1D Mk III You can set the JPEG image quality and apply it to - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 23
Glance 1 Downloading Images 2Camera Settings 3Remote Shooting ¿ The [Register peripheral illumination correction data] window appears. Lenses for which correction data is registered in the camera are shown checked. 2 Select the lens category for which you want to register correction data. Register - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 24
lens for which you want to register correction data and click the [OK] button. ¿ The correction data for the selected lens is registered in the camera. Setting My Menu and Registering to the Camera You can register up to six frequently used menu items as My Menu and register them to the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 25
1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference ¿ The selected item is added to [Items that can be configured in My Menu on the camera] on the left side of the window. O You can register up to six items with the above procedure. O You can change the position of - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 26
. You can also shoot by directly operating your camera even during remote shooting, or preset a time allowing the camera to shoot automatically with timer shooting. Remote Live View Shooting 26 Remote Live View Window Functions 30 Focusing Manually 30 Focusing Using AF 32 Focusing Using Quick - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 27
can recheck it using the linked software Digital Photo Professional (hereinafter DPP). This function is effective for shooting large numbers of shots with fixedframing such as for studio shooting. 1 Connect your camera and computer, and then turn the camera's power switch to < ON >. ¿ EU starts up - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 28
4 Set the Live View function. O Click [Live View/Movie func. set.], and click [Enable] in the [Live View shoot.] window that appears. Click Live View shoot. window Click O For setting 1D Mk IV 5D Mk II 7D 500D , refer to the next page. REBELT2i 550D REBELT1i Introduction Contents at a Glance 1 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 29
O On 1D Mk IV 5D Mk II 7D REBELT2i 550D REBELT1i 500D , click [Live View/Movie func. set.], and set the Live View function in the [Live View/Movie func. set.] window that appears. Live View/Movie func. set. window 1D Mk IV Select [Stills] for [LV func. setting] and a setting for [Exposure simulation - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 30
¿ The shot image is transferred to your computer and displayed in the [Quick Preview] window. And then, DPP starts up automatically. O You can quickly review the shot image in the [Quick Preview] window displayed before DPP starts up. You can also resize the [Quick Preview] window. O You can show - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 31
pages explain the functions available in the [Remote Live View window], including checking the camera settings and focusing while viewing your subject on the computer screen. Focusing Manually You can focus manually while viewing the enlarged image in the [Remote Live View window]. 1 Set the lens - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 32
3 Click the [ ] button. ¿ The section you selected in step 1 is displayed enlarged at 100% (actual pixel size) in the [Zoom View] window. Zoom View window 4 Adjust the focus. Closer Further away O[ ], [ ]: Adjustment Large amount O[ ], [ ] : Adjustment Medium amount O[ ], [ ] : Adjustment - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 33
AF modes, images can be focused automatically in the same way as on the camera itself. Focusing Using Quick Mode 1D Mk IV 5D Mk II 7D 50D REBELT2i method from the list box. O Selectable items differ depending on the camera settings. 3 Click the AF point in the position where you want to - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 34
. 2 Drag the enlargement display frame to move it to the position where you want to focus. ¿ AF is executed. ¿ When focus is achieved, the camera makes a beeping sound and the AF point turns green. O If focus is not achieved, the AF point turns red. Introduction Contents at a Glance 1 Downloading - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 35
3Remote Shooting 4 Preferences ¿ The aperture value (exposure simulation) is set in the capture window (p.70). Reference Index ¿ AF is executed. ¿ When focus is achieved, the camera makes a beeping sound and the AF point turns green. O If focus is not achieved, the AF point turns red. O If the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 36
View Window You can change the white balance of an image in the [Remote Live View window] and register the changed white balance in the camera. 1 Select the white balance to apply to the image. ¿ The selected white balance is applied to the image displayed in real time and you can - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 37
on a point that is to be the standard for white. Click 4 Click the [Apply to camera and execute test shooting] button. Introduction Contents at a Glance 1 Downloading Images ¿ A shot will be taken again using the part of the image in step 3 clicked as the standard for white and the shot image - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 38
You can display gridlines in the [Remote Live View window] in the same way as the camera's Live View function, and adjust the horizontal/ vertical alignment of the camera. 1 Click the [T] button, and select a grid display from the menu that appears. 2 Click the [ ] button. ¿ Gridlines are displayed - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 39
an overlay are JPEG, TIFF, BMP (bitmap), and GIF images. O Even with supported image file types, the display of the image as overlay may not be possible. O Images 2Camera Settings 3Remote Shooting 4 Preferences Reference 3 Move the camera and subject to compose your picture. O You cannot use the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 40
Setting the Composite Ratio The composite ratio can be set from 0 to 100% in increments of 10%. Use the composite ratio slider to set the composite ratio. 1 Move cursor over the slider. ¿ The slider changes from white to blue and becomes movable. 2 Drag the slider left or right to set. Drag left or - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 41
[LV func. setting], and select the movie recording size from the list box. Reference Index When the [Remote Live View window] is displayed, press the camera's < SET > button (Live View shooting button on the 5D Mk II 7D 50D REBELT2i 550D REBELT1i 500D ) to display the Live View image on the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 42
your computer. Image data having a check mark removed from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.6 to p.9 of this Instruction Manual to download. Reference Index 41 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 43
[Screen settings] is set to [Still display] or [Exposure simulation]. O If the camera firmware is Ver.2.0.0 or later, set the frame rate on the camera. Note that if the frame rate has been set to 24 fps on the camera, if you change the movie recording size with EU, the frame rate will - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 44
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.6 to p.9 of this Instruction Manual to download. 7D 1 Prepare for Live View shooting. O Follow the procedure of step 1 and step 2 for "Remote - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 45
When setting the movie recording size, click [Live View/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. 4 Click the [ ] button and begin shooting. ¿ At the bottom left of the [Remote Live View window], a [ ] icon and the recording time are displayed. - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 46
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.6 to p.9 of this Instruction Manual to download. REBELT2i 550D 1 Prepare for Live View shooting. O Follow the procedure of step 1 and step - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 47
When setting the movie recording size, click [Live View/Movie func. set.], and display the [Live View/Movie func. set.] window before setting. Select Click Note the following when you set the movie recording size to [Movie Crop 640 x 480 60 fps]. • The Movie crop image cannot be magnified for - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 48
from their file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.6 to p.9 of this Instruction Manual to download. REBELT1i 500D 1 Prepare for Live View shooting. O Follow the procedure of step 1 and step - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 49
from its file name are not downloaded. Afterward, when downloading image data to your computer from the camera's memory card, use the method described on p.6 to p.9 of this Instruction Manual to download. 4 Preferences Reference Index O After you click the [Download] button, the file names of the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 50
Timer-controlled Shooting Two types of timer shooting are available where the camera automatically takes shots at a specified time or a specified number. Timer Shooting You can automatically take a shot when the specified time elapses. 1 Display the capture window (p.26). 2 Click the [ ] button. - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 51
Mk IV 1Ds Mk III 1D Mk III . • For cameras with < B > (bulb) on the Mode dial, set to < B >. • For cameras without < B > (bulb) on the Mode dial, set the Mode dial to < M > (manual), and select [BULB] in the capture window or set the camera's shutter speed to [BULB]. 4 Click the [ ] button. ¿ The - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 52
. For more details on setting items, also refer to the Instruction Manual provided with your EX-series Speedlite and with your camera. 1 Prepare your camera and flash. O When using an external flash, mount it on your camera. 2 Connect your camera and computer, and then start up EU (p.5). 3 Click - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 53
5 Click [Flash function settings]. Flash Control Menu ¿ The [Flash function settings] window appears. 6 Specify settings. Flash function settings window Check that this box is checkmarked Click setting items, and select settings from the menu that appears Enable the wireless func., click the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 54
camera's LCD monitor, EU [Flash function settings] window automatically closes. O You can use modeling flash by clicking the [Modeling flash] button. You should only use modeling flash for a maximum of 10 times continuously. (For more information, refer to the Instruction Manual quickly review the - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 55
4 Preferences You can change each of the EU functions on each window of the preferences window to make them easier to use. Preferences 55 Basic Settings 55 Destination Folder 56 File Name 56 Download Images 57 Remote Shooting 57 Linked Software 57 Introduction Contents at a Glance 1 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 56
you remove the check mark, the auto power off function remains disabled, even if you set the auto power off function on the camera (only when the camera is connected to a computer.). O If you checkmark [Register WFT Pairing Software in Login Options], the WFT pairing software is added to the login - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 57
. (If [Do not modify] is selected, images are saved with the file name set in the camera.) You can also customize the naming rule for files by clicking the [Customize] button. O You can set prefix characters, number of digits for serial numbers, and the start number individually for file names. 56 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 58
clicked. [Images whose transfer settings were specified with the camera] in the [Settings for downloaded images] menu is only enabled for cameras capable of direct transfer of shot images. Refer to your camera's Instruction Manual for details. Remote Shooting You can set operations performed during - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 59
for you to easily find information you are looking for. Troubleshooting 59 Monitor Folder Function (Function for Use with the WFT-E2 the Software 63 Fixing the Plug to the Camera 64 List of Main Window Functions 66 List Index 76 About This Instruction Manual 77 Trademark Acknowledgments 77 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 60
can cause faults and malfunctions (p.5). O Check that the camera's power switch is < ON > (p.6). O EU and the camera may not communicate normally with a cable other than the EOS DIGITAL camera-dedicated Canon interface cable (p.5). O Connect your camera and computer directly with the interface cable - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 61
your computer up while it is still connected to the camera. Depending on the type of computer, disconnecting the Manual for more information on sleep mode. Remotely shot images using EU are not displayed in DPP O In Digital Photo Professional, select the [Tools] menu X [Sync folder with EOS - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 62
is a function for checking your images with Digital Photo Professional (hereinafter DPP) in real time A/B/C/D, or E5A/B/C/D refer to the Instruction Manual provided with each product. 2 Click the E4/A, E4 II A/B/C/D, and E5 A/B/C/D are not supported for Mac OS X 10.6. You can change the software - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 63
For details on using each software, refer to the instruction manual for the software. For Picture Style files, refer to p.18. 3 Click the software you want to start up. 1 Connect your camera not supported for Mac OS X 10.6. 62 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 64
camera appears in "****" of the file name. O The "YYYY" in the file names represents a number between 0001 and 9999. Contains a file allowing the camera folder in which the software is saved. O Open the [Canon Utilities] folder. 2 Drag the [EOS Utility] folder to the Trash. 3 Select the [Finder] - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 65
during remote shooting. 1D Mk IV 1 Open the covers. 3 With the plug as it is in step 2, connect it to the camera's terminal. terminal 4 Fix the cable protector with the fixing screw. 2 Pass the small plug of the cable through the cable protector, and pull - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 66
Remove the cap. 2 Attach the cap on the fixing screw. 3 Connect the small plug of the cable into the < > terminal on your camera. 4 Attach the cable protector and fix it with the fixing screw. Cable protector Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 67
List of Main Window Functions Control camera tab sheet Accessories tab sheet (p.6) (p.7, p.67) (p.26, p.70) (p.61) (p.55) Quits EU (p.10) (p.62) Introduction Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 Preferences Reference Index 66 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 68
List of Viewer Window Functions (p.7) Switches the recording media Movie icon Bracketing icon Images already transferred to computer icon Selects the condition of the image Recording media folder hierarchy Recording time RAW image icon RAW + JPEG image icon Protect icon Audio recording icon - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 69
Functions (p.22) Displays all the categories Lens category Displays only the registered lenses Displays lenses selected in [Select a lens category] by category No. of lenses registered in the camera/No. of lenses that can be registered Lens names displayed in the [Register peripheral illumination - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 70
of My Menu Settings Window Functions (p.23) Switches My Menu position My Menu (up to 6 items) Adds to My Menu Applies My Menu to the camera Deletes from My Menu Introduction All items that can be applied to My Menu Contents at a Glance 1 Downloading Images 2Camera Settings 3Remote Shooting 4 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 71
Displayed items differ depending on the model and settings of the camera connected. Mirror lockup Drive mode Bracketing shot image. Setting < A- Displays the [My Menu] (p.24) DEP > as the camera's shooting mode Displays the disables this button. *6 Click the aperture while holding down the [ - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 72
Exposure Level/AEB Level O The display changes as follows by double-clicking the Exposure level/AEB level item. Darkest exposure 1 level darker 1 level brighter Brightest exposure Exposure level adjustment AEB level setting Setting width 0 Narrow setting range 1 level Maximum setting range Widen - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 73
wireless setting [Save] button [Load] button [Modeling flash] button * Displayed information differs depending on the settings. For more details on settings, also refer to the Instruction Manual provided with your EX-series Speedlite or camera. Introduction Contents at a Glance 1 Downloading - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 74
List of Remote Live View Window Functions (p.26) Introduction AF point Enlargement display frame Sets the color temperature Controllers 1 Selects the white balance (p.35) Click white balance Displays the [Test Shooting] window (p.75) AF mode (p.32 to p.34) Lens drive (p.31) Checks the depth of - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 75
image Returns to the [Remote Live View window] AF point show/hide * Clicking the [ ] button switches to a quality suited to focusing while viewing on your camera's LCD monitor; clicking the [ ] button switches to a quality suited to focusing while viewing on your computer. Index 74 - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 76
List of Test Shooting Window Functions (p.35) Test shooting button Displays the [Click white balance] window (p.36) Saves the test shot image Enlargement ratio of the image Displays the capture window Closes the window RGB values* Rotates the image Enlargement/reduction of the image - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 77
Remote Live View Shooting 34 Connecting the Camera to Your Computer 5 D Destination Folder Quick Mode (Remote Live View Shooting 32 Focusing Manually (Remote Live View Shooting 30 Focusing Using AF 32 View Shooting 38 Q Quitting the EOS Utility 10 R Register Peripheral Illumination Correction - Canon 9320A010 | EOS Utility 2.8 for Macintosh Instruction Manual - Page 78
Shooting Settings 57 Starting up EOS Utility 6 Supported Camera 2 System Requirements 2 T Instruction Manual has been reviewed thoroughly. However, if you should notice any errors or omissions, please contact a Canon Service Center. O Please note that irrespective of the above-mentioned, Canon
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
Communication Software for the Camera
EOS Utility
Ver. 2.8
Instruction Manual
1D Mk IV
1Ds Mk III
1D Mk III
5D Mk II
7D
50D
40D
REBELT2i
550D
REBELT1i
500D
REBELXSi
450D
REBELXS
1000D
O
Content of this Instruction Manual
O
EU is used for EOS Utility.
O
Camera model is displayed as an icon.
Example: EOS-1D Mark IV
J
O
displays the relevant camera model.
O
In this manual, the windows used in the examples
are from Mac OS X 10.4.
O
The selection sequence of menus is displayed in
X
procedures.
(Example: Select the [Window] menu
X
[Main Window].)
O
Square brackets are used to indicate items such as
menu names, button names and window names
that appear on the computer screen.
O
Text inside < > indicates a camera switch name or
icon, or a keyboard key name.
O
**
indicates a reference page.
Click to move to the relevant page.
O
: Marks information that should be read before use.
O
: Marks additional information you may find helpful.
1D Mk IV
© CANON INC. 2010
CT1-7185EUME-001
O
Switching Between Pages
O
Click on arrows on the bottom right of the screen.
: next page
: previous page
: return to a page you had previously displayed
O
Click on the chapter headings on the right side of
the screen to switch to the contents page of that
chapter. Also, click the item you want to read about
on the table of contents to move to the relevant
page.