Canon DP-V2421 Video Display Operation Guide

Canon DP-V2421 Manual

Get Canon DP-V2421 PDF manuals and user guides View all Canon DP-V2421 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon DP-V2421 manual content summary:

  • Canon DP-V2421 | Video Display Operation Guide - Page 1
    Firmware ver. 1.5 / Firmware ver. 1.4 • Before use, be sure to read this guide, including the safety and handling precautions. • Reading this guide will help you learn to use the video display properly. • Store this guide safely so that you can use it in the future. Instruction Manual English
  • Canon DP-V2421 | Video Display Operation Guide - Page 2
    Instruction Manual or Setup Guide. Before using the product, be sure to read "Important Usage Instructions" and "Safety Instructions and Handling Precautions". • The Operation Guide Information 94 Supported Signal Format 95 Image/Frame Display 110 Error Messages 113 Troubleshooting 116
  • Canon DP-V2421 | Video Display Operation Guide - Page 3
    language setting, please refer to p.86. About this manual The screen of the DP-V3120 is used as an example in this Guide. Some of the illustration used in the Guide have been simplified for clarity. Conventions used in this manual : Indicates a reference page. Note: Indicates a note. Reference
  • Canon DP-V2421 | Video Display Operation Guide - Page 4
    Operating the Video Display 4 Using buttons and jog dial on the video display, you can adjust image quality and configure settings for input signals. In addition, you can assign frequently used functions to the CH (Channel) and F (Function) buttons. Basic operations to use the OSD menu MENU
  • Canon DP-V2421 | Video Display Operation Guide - Page 5
    selection frame is on setting options. • A slider appears at the bottom of the screen. 2 Make adjustments using the jog dial with using the slider as guide. 3 When adjustments are completed, press the jog dial. • The screen returns to the original OSD menu.
  • Canon DP-V2421 | Video Display Operation Guide - Page 6
    B] can be set individually using the jog dial ( ). 2 Select one. • The setting screen for [Gain] or [Bias] will be displayed. 3 Switch the guide in the upper right area of the slider screen using the jog dial ( ). • The indication changes to [RGB], [R], [G], and [B]. Selecting [RGB] will allow
  • Canon DP-V2421 | Video Display Operation Guide - Page 7
    Operating the Video Display Temporarily Saving Parameters (Anchor Point Setting) You can temporarily save parameters for [Contrast], [Brightness], [Chroma], [Sharpness], and [HDR Range]. See 32 for setting anchor points during CDL adjustment. 1 Select [Adjustment] [Anchor Adjustment]. 7 2
  • Canon DP-V2421 | Video Display Operation Guide - Page 8
    Operating the Video Display Changing Image Quality Automatically According to Input Signal On this video display, you can automatically change the image quality according to video resolution or metadata. 8 Changing [Picture Mode] automatically ( 51) 1 Select [Channel Settings] [Select Channel].
  • Canon DP-V2421 | Video Display Operation Guide - Page 9
    Operating the Video Display Adjust image quality on left/right side of screen (image comparison mode) You can divide the screen in two and adjust the image quality on the left and right sides of the screen individually. 1 Select [Channel Settings] [Picture Mode] [Type]. • Select [L/R]. 9 2
  • Canon DP-V2421 | Video Display Operation Guide - Page 10
    instruction manual of the CA-310 and CA-210. The video display can perform measurement or calibration of the display using the DP-V Color Adjustment software. Refer to the Canon website for the DP DP-V2411 Konica Minolta Universal Measuring Probe CA-310 support: CA-PU32, CA-PU35 CA-210 support:
  • Canon DP-V2421 | Video Display Operation Guide - Page 11
    error may occur. Refer to the CA-310 and CA-210 instruction manual for the detail operation. • Warming-up is necessary to stabilize LUT] [LUT Import]. • The LUT file (.clut format) is proprietary to Canon Video Display. Refer to the Canon website for the file format and how to create the LUT file. •
  • Canon DP-V2421 | Video Display Operation Guide - Page 12
    code, use "Shift-JIS", "EUC-JP", or "UTF-8 (with/without BOM)". • Files in which both 1D-LUT and 3D-LUT are written are not supported. „„Concept Drawing of Display Image Processing and LUT Range conversion 1D-LUT (UserLUT) Import CDL/3D-LUT (UserLUT) Import Range conversion 1D-LUT (GammaLUT
  • Canon DP-V2421 | Video Display Operation Guide - Page 13
    at startup from [User 1] to [User 3] in [Power on Setting] in [System Settings] ( 90). • To export this device's settings to other Canon displays: -- If a display model has functions with different menu settings or setting ranges, some settings will not be correctly exported (settings will not be
  • Canon DP-V2421 | Video Display Operation Guide - Page 14
    Operating the Video Display Note • The exported file is automatically saved under the name "YYYYMMDDhhmmss_Preset name.ccc (cdl)". • Up to 1000 CDL import files are recognized. 14 Set Date/Time ( 86) This section describes how to set the video display Date/Time. The video display Date/Time will
  • Canon DP-V2421 | Video Display Operation Guide - Page 15
    wish to register. • You can check the function assigned to the F buttons of the main unit. Open the [System Settings] [OSD Settings] [Function Button Guide] menu and select [On]. Pressing/moving the jog dial ( , or Rotate) while OSD is not showing will display the list of functions. Selecting
  • Canon DP-V2421 | Video Display Operation Guide - Page 16
    Operating the Video Display Using the Channel (CH) Button You can assign channels (various settings related to input signal) to the CH buttons on the video display and switch channels instantly. 16 1 Select [System Settings] [Function/Channel Button] [Display Channel]. • The button selection
  • Canon DP-V2421 | Video Display Operation Guide - Page 17
    Operating the Video Display The following content is assigned to channel buttons on the video display and to each channel by factory default. CH CH1 CH2 CH3 CH4 CH5 Input Configuration 12-3G/HD-SDI 3G/HD-SDI HDMI HDMI 3G-SDI RAW 12-3G/HD-SDI 12-3G/HD-SDI 3G-SDI RAW 3G/HD-SDI 3G/HD-SDI
  • Canon DP-V2421 | Video Display Operation Guide - Page 18
    Operating the Video Display CH CH6 Input Configuration 12-3G/HD-SDI 3G/HD-SDI 18 6G/3G/HD-SDI Select Input Signal Automatic Image Division Automatic Link Order Automatic Format Automatic Audio Input Automatic Marker/TC/CameraInfo Input Input A Internal Sync Off Channel Name (
  • Canon DP-V2421 | Video Display Operation Guide - Page 19
    19 automatically disappear after 6 seconds. Note • You can select how the banner is displayed ([Banner] 87). • You can monitor the input signal status. ([Signal Monitoring] 72) • For more detailed signal information, please refer to the section on [Signal Information] ( 94). • The [Detecting sync
  • Canon DP-V2421 | Video Display Operation Guide - Page 20
    display using an external device [LAN terminal] The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You to [0x0000] in the TSL Protocol settings. 3 Select [Network/IMD Settings] [In Monitor Display]. 4 Select [Control] [TSL Ver. 5.00]. • This will allow operation from
  • Canon DP-V2421 | Video Display Operation Guide - Page 21
    such as IP address and subnet mask are acquired automatically. • Supported encryption schemes Infrastructure: WEP64 (ASCII), WEP128 (ASCII), WPA-TKIP set access points, and other information, either refer to the device Instruction Manual or contact the manufacturer. • Up to 24 access points can be
  • Canon DP-V2421 | Video Display Operation Guide - Page 22
    Operating the Video Display When using the [Access Point] method 3 Select [Control] [Off]. 4 Select [Access Point] ( 84). 22 • Enter the SSID. This is set using up to 24 alpha-numerical characters and symbols. • Set the communication mode. • Set the channel. • Enter the password. This is set
  • Canon DP-V2421 | Video Display Operation Guide - Page 23
    This function checks operation using the following web browsers. • Safari (Apple) • Google Chrome (Google) ※ * Correct operation cannot be guaranteed on all supported OS or web browser editions. CAUTION • Remember to change the default settings for ID and Password when using this function. Note
  • Canon DP-V2421 | Video Display Operation Guide - Page 24
    Operating the Video Display „„Operation screen [View] screen After pressing one of the image capture buttons, the captured image will be displayed. You can also operate the CH buttons and F buttons (function/channel buttons). 24 Captured image The position can be moved by selecting the pixel
  • Canon DP-V2421 | Video Display Operation Guide - Page 25
    on the video display. [LUT Import (1D-LUT)]*, [LUT Import (3D-LUT)] Imports a LUT. (* only) 25 [Frame Lum. Monitor Export] Exports [Frame Luminance Monitor]. Exporting [Frame Luminance Monitor] will create a "latest.csv" file for the luminance in the final screen and an "All.zip" file (a file
  • Canon DP-V2421 | Video Display Operation Guide - Page 26
    ] individually. You can change the mode name within 24 one-byte characters including alphabetical characters, numbers, and symbols ( 39). [CINEMA EOS SYSTEM]: Canon Log is the ideal mode for displaying images captured with Cinema EOS cameras. Using Camera Link, you can have the image quality setting
  • Canon DP-V2421 | Video Display Operation Guide - Page 27
    the same time. • When [Gain R/G/B] or [Bias R/G/B] value is adjusted, an asterisk [*] is displayed by color temperature preset mode. • The displayed color coordinates (x, y) are just a guide and not guaranteed absolute values.
  • Canon DP-V2421 | Video Display Operation Guide - Page 28
    to DCI], [DCI-P3+ to 709], [DCI-P3+ to DCI]: Modes where the color gamut is converted to monitor Cinema Gamut and DCI-P3+ videos recorded by the Cinema EOS cameras. [S-Gamut3 to 709], [S-Gamut3 to 2020], [S- cameras, please refer to the "Parameter of Cinema EOS cameras and Canon displays ( 77)".
  • Canon DP-V2421 | Video Display Operation Guide - Page 29
    [Canon Log (HDR)], [Canon Log 2 (HDR)], [Canon Log 3 (HDR)]: Select the Canon Log (HDR) gamma/EOTF for HDR display. Canon Log 2 [Gamma LUT 1] to [Gamma LUT 8]: Selects an external LUT. Canon Log 2 (HDR) Canon Log 3  About [Hybrid Log-Gamma] Canon Log 3 (HDR) This video display supports
  • Canon DP-V2421 | Video Display Operation Guide - Page 30
    Canon Log (HDR) 100 to 800 Sets the [Canon Log] dynamic range to be displayed, from 0 to 800%. (in 100 increments) Canon Log 2 (HDR) 100 to 1600 Sets the [Canon 4000] SMPTE ST 2084 (PQ) range Range of DP-V3120 SMPTE ST 2084 (PQ) range Range of DP-V3120 4,000 cd/ᶷ 2,000 cd/ᶷ Clip (Saturates
  • Canon DP-V2421 | Video Display Operation Guide - Page 31
    ] ( 41). • Operations when [Format] is set to [ICtCp] are described below. -- When [Color Range] is set to other than [Full], [Wave Form Monitor] will display only a signal set with [Color Range]. -- If [Channel Settings] [Picture Mode] [Type] is [L/R], the right screen's [Color Range] setting for
  • Canon DP-V2421 | Video Display Operation Guide - Page 32
    OSD Menu Sub Menu Setting Options (Bold: factory default) CDL/User LUT Configures settings for CDL or User LUT. CDL/User LUT 32 CDL 1 to CDL 8 User LUT 1 to User LUT 8 Off Only when [Picture Mode] is [User 1-7] ARRI (Rec2100-PQ- 1K-100) ARRI (Rec2100-HLG- 1K-200) VARICAM (V-Log to V-709) RED (
  • Canon DP-V2421 | Video Display Operation Guide - Page 33
    OSD Menu Sub Menu Setting Options (Bold: factory default) Detail Settings CDL Export Exports CDL parameters. CDL Preset CDL 1 to CDL 15 33 All CDL 1 to CDL 8 All File Type CCC CDL Execute CDL Import Imports CDL parameters. Filename CDL Preset CDL 1 to CDL 8 Execute CDL Preset
  • Canon DP-V2421 | Video Display Operation Guide - Page 34
    to [Limited to Full]. [Output] is set to [Full to Limited]. When [Color Range] [Full] ( 31)**: [Input] and [Output] are set to [Off]. [Manual]: Sets [Input] or [Output]. * [Limited 1 (64-940)] or [Limited 2 (64-1023)] is included. ** [Full (0-1023)] or [SDI Full (4-1019)] is included. When [Color
  • Canon DP-V2421 | Video Display Operation Guide - Page 35
    OSD Menu Sub Menu Boost Contrast Boost Contrast Boost Contrast LUT Import Filename LUT Type Select LUT On, Off On, Off Setting Options (Bold: factory default) You can increase the brightness. The upper limit for [Contrast] and the [Backlight Control] settings vary depending on the [Boost Contrast
  • Canon DP-V2421 | Video Display Operation Guide - Page 36
    OSD Menu Sub Menu Base Color Gamut 36 Execute LUT Name LUT Type Select LUT Input Name LUT Delete LUT Type Select LUT Delete YCbCr Color Matrix 2020 Constant Luminance Setting Options (Bold: factory default) SMPTE-C EBU ITU-R BT.709 Adobe RGB DCI-P3 Native When [LUT Type] [Gamut LUT] Selects the
  • Canon DP-V2421 | Video Display Operation Guide - Page 37
    ] [Gamut Mapping]: Mapping is performed on colors outside the native color gamut by Canon's unique method. [Clipping]: Colors outside the native color gamut are clipped by a general 37 method. Automatic Manual • When Manual is selected [Gamma/EOTF] When [Hybrid LogGamma] 1.000 to 1.500 (1.200) When
  • Canon DP-V2421 | Video Display Operation Guide - Page 38
    OSD Menu Sub Menu Setting Options (Bold: factory default) Color Temperature D93, D65, D61, D60, Sets the target color temperature. D56, D50, DCI-P3 Custom (xy) [D93], [D65], [D61], [D60], [D56], [D50], [DCI-P3]: Select from preset color 38 temperatures. • When Custom (xy) is [Custom (xy)]:
  • Canon DP-V2421 | Video Display Operation Guide - Page 39
    OSD Menu Sub Menu Picture Mode (Copy from) Execute Picture Mode Name Anchor Adjustment Reset SMPTE-C EBU ITU-R BT.709 ITU-R BT.2020 Adobe RGB DCI-P3 User 1 (2020 PQ) User 2 (2020 HLG) User 3 (DCI PQ) User 4 (DCI PQ D65) User 5 ~ User 7 OK Cancel OK Cancel Setting Options (Bold: factory default)
  • Canon DP-V2421 | Video Display Operation Guide - Page 40
    LUT 1 to Gamma LUT 8 Cinema Gamut to 709, 2.2, Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), Canon Log 3, Cinema Gamut to 2020 Canon Log 3 (HDR) Cinema Gamut to DCI Canon Log, Canon Log (HDR), Canon Log 2, Canon Log 2 (HDR), Canon Log 3, Canon Log 3 (HDR) DCI-P3+ to 709, DCI-P3
  • Canon DP-V2421 | Video Display Operation Guide - Page 41
    Mode Color Gamut Gamma/EOTF Other than the above Setting Options DCI-P3 DCI-P3 Cinema Gamut to DCI DCI-P3+ to DCI Canon Log (HDR) Canon Log 2 (HDR) Canon Log 3 (HDR) S-Log2 (HDR) S-Log3 (HDR) Color Range to be Set Full Limited Picture Mode Color Gamut Gamma/EOTF Other than the above
  • Canon DP-V2421 | Video Display Operation Guide - Page 42
    OSD Menu ■■Parameter of HDMI metadata and Video Display HDMI metadata Video display setting Color Gamut 42 BT.709 BT.2020 Traditional SDR ITU-R BT.709 ITU-R BT.2020 2.2 Gamma/EOTF PQ PQ Hybrid Log-Gamma Hybrid Log-Gamma
  • Canon DP-V2421 | Video Display Operation Guide - Page 43
    HDR/SDR View Off Off HDMI Link Off Off Picture Mode Name - - Automatic Automatic Non-constant Non-constant Luminance Luminance Clipping Clipping Manual (when [Hybrid LogGamma]: 1.200; when [Hybrid Log-Gamma RGB]: γ1.2-1000 cd/m2) Off Off Off Off - - Automatic Automatic Non
  • Canon DP-V2421 | Video Display Operation Guide - Page 44
    OSD Menu Item Contrast 44 User 1 20000 10000 User 2 10000 10000 User 3 20000 10000 User 4 20000 10000 User 5 to User 7 1000 1000 6000 6000 6000 6000 1000 4000 4000 4000 4000 1000 3000 3000 3000 3000 1000 Brightness 0 0 0 0 0 Chroma 1000 1000 1000 1000 1000 Sharpness
  • Canon DP-V2421 | Video Display Operation Guide - Page 45
    -constant Non-constant Non-constant Luminance Luminance Luminance Luminance Luminance 2020 Gamut Mapping Clipping Clipping Clipping Clipping Clipping HLG System Gamma Manual (when [Hybrid Log-Gamma]: 1.200; when [Hybrid Log-Gamma RGB]: γ1.2-1000 cd/m2) HDR/SDR View On On On Off
  • Canon DP-V2421 | Video Display Operation Guide - Page 46
    Local Dimming Low D65 D60 0.313 0.322 0.329 0.338 1023/1023/1023 (When [D65 Custom]: 1000/1023/1023) 0 0 ITU-R BT.2020 - Canon Log 2 (HDR) - Automatic - - Automatic - DCI-P3 - Dark Surround Off Off On Off Off On Automatic Non-constant Luminance Clipping Off Off Automatic
  • Canon DP-V2421 | Video Display Operation Guide - Page 47
    Item HLG System Gamma HDR/SDR View HDMI Link Picture Mode Name CINEMA EOS SYSTEM Manual (when [Hybrid LogGamma]: 1.200; when [Hybrid Log-Gamma RGB]: γ1.2-1000 cd/m2) Off Off - ACESproxy (ver. 1.0.1) - Off Off - OSD Menu 47
  • Canon DP-V2421 | Video Display Operation Guide - Page 48
    Select the [Select Channel] and choose a channel number from CH1 to CH20. Finally define the parameter of each of the [Channel Settings]. 48  "Supported Signal Format" ( 95) Sub Menu Setting Options Select Channel CH1 to CH20 CH1 to CH30 Display the channel number. In addition, you can assign
  • Canon DP-V2421 | Video Display Operation Guide - Page 49
    the display method when using either [Quad Input] or [Dual Input]. Two division methods "Square Division" and "2 Sample Interleave" are supported for 4K video signals. 49 Automatic [Automatic]: Automatically determined based on payload and displayed. Square Division [Square Division]: Displays
  • Canon DP-V2421 | Video Display Operation Guide - Page 50
    OSD Menu Sub Menu Format 50 Audio Input Marker/TC/CameraInfo Input Setting Options SDI Signal Automatic 4:2:2 YCbCr 10-bit 4:2:2 YCbCr 12-bit 4:4:4 YCbCr 10-bit 4:4:4 YCbCr 12-bit 4:2:2 ICtCp 10-bit 4:2:2 ICtCp 12-bit 4:4:4 ICtCp 10-bit 4:4:4 ICtCp 12-bit 4:4:4 RGB 10-bit 4:4:4 RGB 12-bit 4:4:4
  • Canon DP-V2421 | Video Display Operation Guide - Page 51
    be set when other than [Resolution 4K] and [Resolution 2K] are selected in [Type] [Automatic]. • Colorimetry Bit/Transfer Characteristics of the SDI Payload ID supports the signal in conformity with the following standard. SMPTE ST 2082-10:2018 (12G-SDI) SMPTE ST 2081-10:2018 (6G-SDI) SMPTE ST 425
  • Canon DP-V2421 | Video Display Operation Guide - Page 52
    OSD Menu Sub Menu Single Input Dual View 52 Automatic, Off Separator White Half Black Off Setting Options When other than [Image Division] [Multi View (Quad)] or [Multi View (Dual)] The image from the input signal can be reduced and shown in dual-screen. [Automatic]: When [Picture Mode] [Type]
  • Canon DP-V2421 | Video Display Operation Guide - Page 53
    OSD Menu Display Settings This menu is used to configure the display method. Sub Menu Setting Options (Bold: factory default) 53 Screen Scaling Native Input Resolution Defines how the video is scaled and displayed on the screen. 200% Automatic [Native Input Resolution]: Displays the input
  • Canon DP-V2421 | Video Display Operation Guide - Page 54
    this item is set to [4:3]. Sets the interpolation method when [Screen Scaling] is set to [200%] or [Automatic]. [Shape Trace]: Canon original processing that produces smooth slopes with reduced jagged lines. [Bicubic]: General interpolation process that uses neighboring pixel information to create
  • Canon DP-V2421 | Video Display Operation Guide - Page 55
    OSD Menu Sub Menu Video Position (Multi View) Zoom Zoom Preset Magnification Position Type Frame Hold Setting Options (Bold: factory default) Top Middle Center When using [Multi View (Quad)], [Multi View (Dual)], or [Single Input Dual View] Sets the vertical display position for the image. 55 [
  • Canon DP-V2421 | Video Display Operation Guide - Page 56
    OSD Menu Sub Menu Background Color 56 I/PsF PsF I/P Conversion Film Cadence White Gray Off Automatic Interlace PsF Progressive Interlace Image Priority Speed Priority 2-2 2-3 2-3-3-2 Off Setting Options (Bold: factory default) Sets the color of the black band to check the boundary of the black
  • Canon DP-V2421 | Video Display Operation Guide - Page 57
    OSD Menu Audio Settings This menu is used to set audio output from the headphone terminal. Sub Menu SDI Group CH L (SDI) CH R (SDI) CH L (HDMI) CH R (HDMI) Volume Audio Switch CH1-CH8 CH9-CH16 [SDI Group] When [CH1-CH8] CH1 to CH8 (CH1) When [CH9-CH16] CH9 to CH16 (CH9) [SDI Group] When [CH1-CH8]
  • Canon DP-V2421 | Video Display Operation Guide - Page 58
    OSD Menu Marker Settings This menu is used to configure various markers. The factory defaults differ according to the [Marker Preset] setting ( 63). 58 Sub Menu Setting Options (Factory default) Marker Preset Marker 1 to 5 Off Customizes markers which are assigned to markers 1 to 5. Aspect
  • Canon DP-V2421 | Video Display Operation Guide - Page 59
    OSD Menu Sub Menu Setting Options (Factory default) Line Color White, Red, Green, Sets the color of the aspect marker line. Blue, Yellow, Cyan, Magenta, Gray 59 Line Brightness High, Low, Half Sets the brightness of the aspect marker line. H Position -65 to 65 Changes horizontal
  • Canon DP-V2421 | Video Display Operation Guide - Page 60
    OSD Menu Sub Menu Shape 60 Box Box (Mask) Brackets Enclosure Setting Options (Factory default) Sets the area shape of the safety zone marker. [Box]: [Box (Mask)]: [Brackets]: [Enclosure]: Line Width Line Color Line Brightness H Position V Position Thick Normal Thin White, Red, Green, Blue,
  • Canon DP-V2421 | Video Display Operation Guide - Page 61
    OSD Menu Sub Menu Area Marker1, 21 Setting Options (Factory default) There are two types of [Area Marker]: 1 and 2, which share the same settings. [Area Marker] is used to check a specific area using a rectangular box. 61 Enable H Position V Position Width (dot) Height (dot) Mask Line Line Width
  • Canon DP-V2421 | Video Display Operation Guide - Page 62
    OSD Menu Sub Menu Center Marker2 62 Setting Options (Factory default) [Center Marker] shows the center of the image. Enable Size Line Width Line Color Line Brightness Grid Marker2 On, Off Switches the center marker On, Off. Large Middle Small Sets the size of the center marker. Thick Normal
  • Canon DP-V2421 | Video Display Operation Guide - Page 63
    OSD Menu 1 The marker is not displayed in the following cases: -- When there is no signal, unsupported signal, or a channel with [Input Configuration] not set is selected -- When an enlarged image is displayed -- During the execution of [Playback File] under [Screen Capture] -- When a [Test
  • Canon DP-V2421 | Video Display Operation Guide - Page 64
    OSD Menu Item Area Marker 1, 2 64 Center Marker Grid Marker Enable H Position V Position Width (dot) Height (dot) Mask Line Line Width Line Color Line Brightness Enable Size Line Width Line Color Line Brightness Enable Distance Line Width Line Color Line Brightness * When Safety Zone Marker 2 is
  • Canon DP-V2421 | Video Display Operation Guide - Page 65
    OSD Menu Function Settings This menu is used to set the image signal information display and the cinema camera link function. Sub Menu Setting Options (Bold: factory default) 65 Time Code1 Display the time code superimposed on the signal. Enable Type Size Position H Offset Type String Display
  • Canon DP-V2421 | Video Display Operation Guide - Page 66
    20) Sets the reference level. Normal Low Half Sets brightness for the audio level meter. Configures various settings for the wave form monitor. On the wave form monitor, the horizontal axis shows the horizontal resolution of the video and the vertical line shows the signal level. To the right of
  • Canon DP-V2421 | Video Display Operation Guide - Page 67
    -Gamma Canon Log Canon Log 2 Canon Log 3 S-Log2 S-Log3 ARRI (Rec2100-PQ- 1K-100) ARRI (Rec2100-HLG- 1K-200) 4 to 1023 Automatic Manual Setting monitor. [Automatic]: Sets in accordance with the [Gamma/EOTF] and [Color Range] settings. • When [SMPTE ST 2084 (PQ)], [Canon Log], [Canon Log 2], or [Canon
  • Canon DP-V2421 | Video Display Operation Guide - Page 68
    Enable Target Position Size Histogram1 Enable Setting Options (Bold: factory default) Automatic Normal Low Sets the Brightness of the wave form monitor. [Automatic]: Brightness is automatically adjusted according to the contrast value and average luminance value of the input signal. Bottom Left
  • Canon DP-V2421 | Video Display Operation Guide - Page 69
    OSD Menu Sub Menu Color Automatic Normal False Color Gain HDR Range HDR/SDR Ratio x1, x2, x3 On On (Clip) Off On, Off Peak/Ave. Luminance On, Off Size Large, Small Setting Options (Bold: factory default) [Automatic]: Unless [Picture Function Settings] [False Color] [Enable] is set to [Off
  • Canon DP-V2421 | Video Display Operation Guide - Page 70
    Luminance" for the entire screen (frame) is displayed. For other conditions, "Max./Ave. Gradation Values" is displayed. The frame luminance monitor can be used when the resolution is [4096x2160], [3840x2160], [2048x1080] or [1920x1080]. Luminance graph Current value for average luminance (cumulative
  • Canon DP-V2421 | Video Display Operation Guide - Page 71
    the [False Color 2] settings. Reference Automatic Luminance Level - Manual Peak [Automatic]: Works in conjunction with the [HDR Range] content. Export Pixel Value Check1 The luminance information obtained when [Frame Luminance Monitor] is valid, is exported to the USB memory. When [Gamma/EOTF]
  • Canon DP-V2421 | Video Display Operation Guide - Page 72
    -R BT.2020 ž [Gamma/EOTF]: 1.0, 2.2, 2.35, 2.4, 2.6, SMPTE ST 2084 (PQ), Hybrid Log-Gamma (except for Hybrid Log-Gamma RGB) • When the position to display [Wave Form Monitor] or [Vector Scope] is set to [Bottom Left], this item may not be displayed depending on the size setting for each item to be
  • Canon DP-V2421 | Video Display Operation Guide - Page 73
    Pauses the video. All Video Selects the sources to capture. [All]: Everything is captured including video assistance functions such as markers and wave form monitor as well as OSD menu. [Video]: Only video signals are captured. Bitmap JPEG Sets the File Type of the image to capture. On, Off
  • Canon DP-V2421 | Video Display Operation Guide - Page 74
    3D-LUT 1-8 When [Automatic Adjustment (VARICAM)] [On] Sets the color gamut and gamma/EOTF shown in the display. Anamorphic On, Off When a Canon camera is connected, displays in accordance with the settings when anamorphic lens display settings are included in the camera metadata. Area Marker1
  • Canon DP-V2421 | Video Display Operation Guide - Page 75
    OSD Menu Setting Options (Bold: factory default) Allows you to link stopping the fan to the camera's recording operation (For Cinema EOS cameras, Canon professional-use video cameras, or ARRI cinema cameras that are compatible with this video display). Set [System Settings] [Fan Control] to [On
  • Canon DP-V2421 | Video Display Operation Guide - Page 76
    - When an I/PsF 4K signal is displayed on one screen and when the [Wave Form Monitor] and [Vector Scope] [Position] = = = - = = = settings are the same When there is no signal or the input signal is not supported = = = = - - - When displaying video at resolutions other
  • Canon DP-V2421 | Video Display Operation Guide - Page 77
    Gamut to DCI DCI-P3 Cinema EOS cameras Gamma/EOTF Canon Log Canon Log 2 RAW Gamma Canon Log 3 ST 2084, PQ Normal (BT.709) Wide DR EOS Std. DCI-P3 Canon display Gamma/EOTF HDR Range Canon Log (HDR) - Canon Log 2 (HDR) Canon Log 3 (HDR) SMPTE ST 2084 (PQ) 2.2 1000 2000 - 2.6 OSD Menu
  • Canon DP-V2421 | Video Display Operation Guide - Page 78
    709 - - REC 2020 - - Wide Gamut Log C Rec2100-PQ1K-100 ARRI (Rec2100PQ-1K-100) Rec2100-HLG1K-200 ARRI (Rec2100HLG-1K-200) 3D-LUT 1-8 User LUT 1-8 Canon display Color Gamut ITU-R BT.709 ITU-R BT.2020 ITU-R BT.2020 ITU-R BT.2020 - Gamma/EOTF 2.2 2.2 SMPTE ST 2084 (PQ) Hybrid Log‑Gamma
  • Canon DP-V2421 | Video Display Operation Guide - Page 79
    OSD Menu Picture Function Settings This menu is used to set video assistance functions, for example. Sub Menu Peaking1 Enable Monochrome Frequency Range Color False Color1 Enable Type HDR/SDR Border Range - SDR Setting Options (Bold: factory default) 79 The outline is displayed in a color, used
  • Canon DP-V2421 | Video Display Operation Guide - Page 80
    Yellow/orange: 800 to 8000 Orange/red: 1000 to 10000 (Only when using [Manual]) Setting when [Hybrid Log-Gamma] (10 increments) Blue/light blue: 250 ( 500 (400*) to 900 Orange/red: 600 (500*) to 1000 (Only when using [Manual]) * When [HDR/SDR Border] is [100] Displays video in monochrome, with the
  • Canon DP-V2421 | Video Display Operation Guide - Page 81
    OSD Menu Sub Menu Peak Range Range 2020 Outside of Gamut View1 Enable Color Gamut Range Monochrome2 Blue Only2 Red Off2 Green Off2 Blue Off2 Backlight Scan Compare View1 Enable Type Setting Options (Bold: factory default) When [Range Check 1] When [Over Range] [Automatic] Automatic, Off
  • Canon DP-V2421 | Video Display Operation Guide - Page 82
    each setting is applied. [Hybrid Log-Gamma]: The [User LUT] corresponding to each setting is applied. [Canon Log(HDR)], [Canon Log 2(HDR)], [Canon Log 3(HDR)]: [Canon Log], [Canon Log 2] or [Canon Log 3] is applied. [S-Log2 (HDR)], [S-Log3 (HDR)]: [HDR Range] setting [100] is set. [User LUT
  • Canon DP-V2421 | Video Display Operation Guide - Page 83
    OSD Menu Sub Menu Luminance Contrast HDR Range (PQ) 1000 to the current setting (1000) 100 to 10000 (1000) System Gamma (HLG) 1.000 to 1.500 Setting Options (Bold: factory default) Changes the HDR range or system gamma setting and displays HDR images with different luminance for comparison.
  • Canon DP-V2421 | Video Display Operation Guide - Page 84
    settings. • Cannot be set when [Power on Setting] is [User 1] to [User 3]. Automatic Manual [Automatic]: Configures an IP address automatically with DHCP/Auto IP. [Manual]: Configure an IP address and subnet mask manually. 192.168.0.1 255.255.255.0 This is used to connect the video display to
  • Canon DP-V2421 | Video Display Operation Guide - Page 85
    The devices and firmware versions that can be linked are shown below. DP-V3120: Version 1.0 or higher DP-V2410: Version 1.4 or higher DP-V2420 / DP-V2421: Version 1.3 or higher DP-V1710 / DP-V1711: Version 1.3 or higher DP-V2411: Version 1.2 or higher Displays not connected can be removed with the
  • Canon DP-V2421 | Video Display Operation Guide - Page 86
    7, CINEMA EOS SYSTEM, ACESproxy (ver. 1.0.1), CH1 to CH5, Marker 1 to Marker 3, Time Code, Audio Level Meter, Wave Form Monitor, Vector Scope, Histogram, Frame Luminance Monitor, False Color 1/2, Monochrome, Blue Only, Red Off, Green Off, Blue Off, Compare View, MENU, Tally Green, Tally Red, Power
  • Canon DP-V2421 | Video Display Operation Guide - Page 87
    or picture mode are changed. Picture Mode On, Off Sets whether to display [Picture Mode]. Time Out On, Off The banner automatically disappears. Function Button Guide On, Off [On]: When all OSD are hidden, you can display the list of functions assigned to an F button on the video display by
  • Canon DP-V2421 | Video Display Operation Guide - Page 88
    be eliminated when the main unit is used during shooting or when silent operation is needed. Set this in advance to stop the fan either manually or by linking it with the camera during shooting ( 75). When this is set to [On], the mode changes so that the fan can be
  • Canon DP-V2421 | Video Display Operation Guide - Page 89
    signals are not supported. Color Range Normal Compatible [Normal]: Sets the [Color Range] setting to the new method used in DP‑V2420 / DP‑V2421 firmware version Compatible [Normal]: Information display for videos such as waveform monitors depends on the status following application of User LUT.
  • Canon DP-V2421 | Video Display Operation Guide - Page 90
    Sub Menu Setting Options (Bold: factory default) Firmware/License Update This function is used to update the video display firmware. Refer to the Canon website for detailed information. 90 Export/Import1 Export Sets the export/import main menu settings. Target USB User 1 to User 3 LAN Select
  • Canon DP-V2421 | Video Display Operation Guide - Page 91
    OSD Menu 1 • The following settings cannot be exported or imported. Adjustment Target values of CDL/User LUT Bypass and Calibration (including calibration results) Display Settings Zoom Preset, Frame Hold Function Settings Test Pattern 91 Picture Function Settings Peaking (Enable), False
  • Canon DP-V2421 | Video Display Operation Guide - Page 92
    OSD Menu ■■Function to allow registration for the display F buttons ( 86) Item Adjustment 92 Picture Mode CDL/User LUT Options Picture Mode Contrast Brightness Chroma Chroma Up Sharpness Backlight Control Gamma/EOTF HDR HDR Range Peak Luminance Control Boost Contrast HDR/SDR View Gain Bias xy
  • Canon DP-V2421 | Video Display Operation Guide - Page 93
    TC/ALM Time Code Audio Level Meter 93 WFM/VEC Wave Form Monitor WFM Select Signal Vector Scope Histogram/Frame Luminance Histogram Frame Luminance Monitor Pixel Value Check Signal Monitoring Log Capture Camera Information Picture Function Settings Peaking Peaking 1 Peaking 2 False
  • Canon DP-V2421 | Video Display Operation Guide - Page 94
    input is displayed. Select a signal with the jog dial according to the guide at top right corner of the menu. When signal 94 information has been * IP Address Subnet Mask MAC Address Wi-Fi IP Address Wi-Fi Subnet Mask DP-V3120 000000000000 1.1 5 h 192.168.0.1 255.255.255.0 FF:FF:FF:FF
  • Canon DP-V2421 | Video Display Operation Guide - Page 95
    Signal Format SDI 95 *: Formats not supporting audio signals. **: Formats supporting audio signals. Transmission method Signal format SD-SDI 720x487i 59.94/60.00 Hz* 720x576i 50.00 Hz* HD-SDI 1280x720P 59.94/60.00
  • Canon DP-V2421 | Video Display Operation Guide - Page 96
    Supported Signal Format Transmission method Signal format 3G-SDI (Level A) 1920x1080i 59.94/60.00 Hz 96 1920x1080P 50.00 Hz** 1920x1080i 50.00 Hz 1920x1080P
  • Canon DP-V2421 | Video Display Operation Guide - Page 97
    Supported Signal Format Transmission method Signal format Color format Color depth Standards 3G-SDI (Level A) 2048x1080i 50.00 Hz 4:4:4 RGB 4:4:4 YCbCr 12-bit/10-bit 4:4:4 X'Y'Z' 12-
  • Canon DP-V2421 | Video Display Operation Guide - Page 98
    Supported Signal Format Transmission method Signal format 3G-SDI (Level B) 98 1920x1080P 59.94/60.00 Hz 1920x1080i 59.94/60.00 Hz 1920x1080P 50.00
  • Canon DP-V2421 | Video Display Operation Guide - Page 99
    Supported Signal Format Transmission method Signal format 3G-SDI (Level B) 2048x1080P 47.95/48.00 Hz 2048x1080P 29.97/30.00 Hz Color format Color depth
  • Canon DP-V2421 | Video Display Operation Guide - Page 100
    Supported Signal Format 100 Transmission method Signal format 3G-SDI (Level B) 2048x1080PsF 23.98/24.00 Hz Dual Link 3G-SDI (Level A) 1920x1080P 59.94/60.
  • Canon DP-V2421 | Video Display Operation Guide - Page 101
    Supported Signal Format Transmission method Signal format Dual Link 3G-SDI Square Division (Level B) 3840x2160P 29.97/30.00 Hz 3840x2160PsF 29.97/30.00 Hz
  • Canon DP-V2421 | Video Display Operation Guide - Page 102
    Supported Signal Format 102 Transmission method Signal format Quad Link 3G-SDI (Level A) 3840x2160P 59.94/60.00 Hz** 3840x2160i 59.94/60.00 Hz 3840x2160P
  • Canon DP-V2421 | Video Display Operation Guide - Page 103
    Supported Signal Format Transmission method Signal format Quad Link 3G-SDI (Level A) 4096x2160P 50.00 Hz 4096x2160i 50.00 Hz 4096x2160P 47.95/48.00 Hz
  • Canon DP-V2421 | Video Display Operation Guide - Page 104
    Supported Signal Format 104 Transmission method Signal format Quad Link 3G-SDI 2 Sample Interleave (Level A) 3840x2160P 59.94/60.00 Hz** 3840x2160P 50.00 Hz** 3840x2160P
  • Canon DP-V2421 | Video Display Operation Guide - Page 105
    Supported Signal Format Transmission method Signal format Quad Link 3G-SDI (Level B) 3840x2160i 50.00 Hz 3840x2160P 29.97/30.00 Hz 3840x2160PsF 29.97/30.
  • Canon DP-V2421 | Video Display Operation Guide - Page 106
    Supported Signal Format 106 Transmission method Signal format Quad Link 3G-SDI (Level B) 4096x2160P 29.97/30.00 Hz 4096x2160PsF 29.97/30.00 Hz 4096x2160P
  • Canon DP-V2421 | Video Display Operation Guide - Page 107
    Supported Signal Format Transmission method Signal format Quad Link 3G-SDI (Level B) 4096x2160PsF 23.98/24.00 Hz Quad Link 3G-SDI 2 Sample Interleave (Level B) 3840x2160P
  • Canon DP-V2421 | Video Display Operation Guide - Page 108
    Supported Signal Format 108 Transmission method Signal format 3840x2160P 59.94/60.00 Hz Dual Link 6G-SDI Square Division, 2 Sample Interleave 3840x2160P 50.00 Hz
  • Canon DP-V2421 | Video Display Operation Guide - Page 109
    8-bit 4:2:2 YCbCr 12-bit 4:2:0 YCbCr 12-bit/10-bit/8-bit 4:4:4 RGB 12-bit/10-bit/8-bit 4:4:4 YCbCr 12-bit/10-bit/8-bit 4:2:2 YCbCr 12-bit Supported Signal Format 109
  • Canon DP-V2421 | Video Display Operation Guide - Page 110
    Image/Frame Display 110 SDI 720x487 720x576 1280x720 1920x1080 2048x1080 Signal system 59.94/60.00 50.00 23.98/24.00 25.00 29.97/30.00 50.00 59.94/60.00 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.00 29.97/30.00 50.00 59.94/60.00 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00
  • Canon DP-V2421 | Video Display Operation Guide - Page 111
    Image/Frame Display 3840x2160 4096x2160 Signal system 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.00 29.97/30.00 50.00 59.94/60.00 50.00 59.94/60.00 23.98/24.00 25.00 29.97/30.00 23.98/24.00 25.00 29.97/30.00 47.95/48.00 50.00 59.94/60.00 Display Method i 50.00 P i 59.94/
  • Canon DP-V2421 | Video Display Operation Guide - Page 112
    Image/Frame Display HDMI 112 640x480 800x600 720x480 720x576 1024x768 1280x720 1280x720 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 1920x1080 2048x1080 2048x1080 2048x1080 2048x1080 2048x1080 3840x2160 3840x2160 3840x2160 3840x2160 3840x2160 4096x2160 4096x2160 4096x2160 4096x2160
  • Canon DP-V2421 | Video Display Operation Guide - Page 113
    to initialize the external sensor. See CA-310 and CA-210 instruction manual. Calibration error. • Check the installation and connection of the external the correct subnet mask. Display is not connected. Check that the Canon display to which you wish to export this video display's settings and
  • Canon DP-V2421 | Video Display Operation Guide - Page 114
    , and then turn on the power. If the message persists, contact Canon Customer Center. The temperature inside the main unit is high. Turn off there is no video signal input. Unsupported video signal is input. Check the supported signal format ( 95). Operation is disabled. Check the setting items. To
  • Canon DP-V2421 | Video Display Operation Guide - Page 115
    Error Messages Wi-Fi adapter Firmware Update DC power supply DC power supply Power Saving Message Description and Action Wi-Fi Adaptor is not connected. Correctly connect the Wi-Fi adapter to the USB terminal of the video display. Failed to connect Wi-Fi Access Point. The password may be
  • Canon DP-V2421 | Video Display Operation Guide - Page 116
    Troubleshooting 116 Symptom Cause and Action Power does not turn on. • Press the button. - (Power indicator does not turn on.) • -SDI RAW signal image may not display, depending on display. the type of the Cinema EOS camera. Refer to the Canon website for a - list of supported products.
  • Canon DP-V2421 | Video Display Operation Guide - Page 117
    Troubleshooting Symptom Cause and Action There is a blank area when set to Quad Input/Dual Input. • There may be no input signal. Check the signal. 49 • Some combinations are not supported the service life of LCD backlight. If the screen becomes dark or starts flickering, contact Canon
  • Canon DP-V2421 | Video Display Operation Guide - Page 118
    Troubleshooting Symptom Cause and Action • When [Peak Luminance Control] is set to [On], the F button assigned 34 The F button on the main unit is flashing. with
  • Canon DP-V2421 | Video Display Operation Guide - Page 119
    from Canon or third parties. 119 Software Developed by Canon and Free Software Software developed or created by Canon and accompanying DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  • Canon DP-V2421 | Video Display Operation Guide - Page 120
    Software Used in This Product WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 120 ■libxml License Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved.
  • Canon DP-V2421 | Video Display Operation Guide - Page 121
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Canon DP-V2421 | Video Display Operation Guide - Page 122
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Canon DP-V2421 | Video Display Operation Guide - Page 123
    LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  • Canon DP-V2421 | Video Display Operation Guide - Page 124
    LUT 32, 34 C Calibration 10, 37 Camera Information 75 Camera Link 74 Canon Log, CanonLog 2, Canon Log 3 29 CDL Export/CDL Import 13 CDL/User LUT 32 Center Marker 62 /Import 13, 90 Export (Signal Monitoring 73 F False Color 79 Fan Settings 88 Film Cadence 56 Firmware/License Update 90
  • Canon DP-V2421 | Video Display Operation Guide - Page 125
    Format 50 Frame Hold 55 Frame Luminance Monitor 70 Function Button Guide 87 Function/Channel Button 86 Function Settings Gamma 37 Hybrid Log-Gamma 29 I Image Division 49 Image Priority 56 In Monitor Display 85 Input Configuration 48 Input Transform 31 Internal Sync 51 I/P Conversion 56
  • Canon DP-V2421 | Video Display Operation Guide - Page 126
    SDI 95, 110 Select Channel 48 Select Input Signal 48 Separator 52 Serial No 94 Shape Trace 54 Sharpness 26 Signal Information 94 Signal Monitoring 72 Single Input 48 Single Input Dual View 52 Slope 32 SMPTE-C 26 Speed Priority 56 Square Division 49 Subnet Mask 84 System Information
  • Canon DP-V2421 | Video Display Operation Guide - Page 127
    Europa N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands http://www.canon-europe.com USA http://pro.usa.canon.com CANON U.S.A., INC. http://pro.usa.canon.com/support (855) 4K-CANON (855-452-2666) (USA only) UNITED KINGDOM Canon UK Ltd Unit 160, Centennial Park, Centennial Avenue, Elstree
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
• Before use, be sure to read this guide, including the safety and handling precautions.
• Reading this guide will help you learn to use the video display properly.
• Store this guide safely so that you can use it in the future.
English
Instruction Manual
Operation Guide
Video Display
Firmware ver. 1.1
/
Firmware ver. 1.4
Firmware ver. 1.3
Firmware ver. 1.5
/
Firmware ver. 1.4