Canon EOS D60 EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2.
Canon EOS D60 Manual
![]() |
View all Canon EOS D60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon EOS D60 manual content summary:
- Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 1
- Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 2
SOFTWARE. No updates, fixes or support will be made available for the SOFTWARE. 4. LIMITED WARRANTY AND LIMITATION OF LIABILITY: It is your responsibility to choose, maintain and match the hardware and software components of your computer system. Thus Canon does not guarantee uninterrupted service - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 3
you must then promptly return the SOFTWARE. In addition, Canon may enforce its other legal rights. 6. U.S. GOVERNMENT RESTRICTED RIGHTS NOTICE: The SOFTWARE is provided with restricted rights. Use, duplication or disclosure is subject to restrictions as set forth in either subparagraph (c) (1) (ii - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 4
in the camera's Instruction Manual. O For the restrictions that apply to the software products, refer also to the Readme files for the respective products. O In order to transfer images from the EOS Viewer Utility, you will need retouching (image editing) software. In order to start the TWAIN Driver - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 5
the main functions of the software provided on the bundled CDROM. Q EOS DIGITAL Solution Disk EOS Viewer Utility O Dedicated software for an EOS DIGITAL camera to be used for downloading and displaying images, processing RAW images, specifying the camera settings such as personal functions. O Can - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 6
M-8) Start up the EOS Viewer Utility (W-12, M-12) To edit/display the images For remote shooting To specify the camera settings Download the images to your computer (W-16, M-16) Start up the EOS Capture (W-88, M-88) Open the Camera Settings window (W-56, M-56) Edit/Display the images (W-20 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 7
to use the EOS Capture for taking shots and specifying the camera settings remotely from your computer. 6 Downloading JPEG Images with the Driver W-97 Describes how to download JPEG images using the WIA Drivers for Windows XP or Windows Me, and the TWAIN Drivers for Windows 2000 or Windows 98 SE - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 8
or more EOS Capture: 600 MB or more WIA Driver: 25 MB or more TWAIN Driver: 25 MB or more PhotoStitch: 40 MB or more Display Screen resolution: 1024 by 768 pixels or more Color quality: Medium (16 bit) or more O Depending on your computer system, this software may not run correctly on Windows 98 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 9
Installing the Software W This chapter describes how to install the bundled software. If you were unable to successfully install the software using the procedure given in 1 this manual, see "Troubleshooting" (W-104). Installing the Software W-4 Correct Installation Procedure W-4 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 10
the camera to your computer before installing the software, see "Troubleshooting" (W-107). 1 Start up your computer. O Exit any programs that are running. 2 Insert the CD (EOS DIGITAL Solution Disk). ¿ The Installer panel appears. 3 Click the [Install] button. ¿ The [Preparing to Install] window - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 11
5 Select [Easy Installation] and click the [Next] button. 1 Installing the Software 6 Check the details of the License Agreement and then click the [Yes] button. 7 Check the software and the folder in which the software will be installed, and then click the [Next] button. ¿ Installation begins - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 12
] button. 9 Click the [Exit] button. 10Remove the CD. ¿ Connect the camera to your computer and complete the installation referring to the procedures in Chapter 2. If you were unable to successfully install the software using the procedure given in this manual, see "Troubleshooting" (W-104). W-6 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 13
you were unable to successfully install the software using the procedure given in this manual, see "Troubleshooting" (W-104). 2 Connecting the Camera to Your Computer W-8 Connecting the Camera to Your Computer for the First Time W-8 Connecting the Camera to Your Computer the Second Time or Later - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 14
either plug (6-pin IEEE1394 port). 2 Plug the dedicated cable into your camera. O Open the cover and plug the cable into the < > terminal. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 3 Set the camera's power switch to . O When the pop-up menu appears - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 15
cable, remove the battery, or remove the DC coupler. • Disconnect the AC adapter's plug or power cord. Before you perform the operations above, be sure to exit all the software. O You cannot communicate with the camera when you are displaying images on the camera's LCD monitor. Always connect - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 16
with the camera is terminated. To re-establish the communication, press the shutter button down halfway or set the camera's power switch Canon 4-pin to 4-pin IEEE1394 cable (optional) with the EOS-1Ds Mark II and EOS-1D Mark II, and a 4-pin to 6-pin IEEE1394 cable (optional) with the EOS-1Ds and EOS - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 17
Windows) X [Canon Utilities] X [EOSViewerUtility xx] ("xx" is the version) X [EOSViewerUtility Readme]. 3 Starting the EOS Viewer Utility ... W-12 Adjusting the Brightness (Digital Exposure Compensation W-31 Adjusting Retouching Software W-48 Specifying the Preferences ......... W-50 Setting the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 18
displayed appears. O Your camera model is displayed in EOS XXX. ¿ For Windows Me, the [Scanner and Camera Wizard] dialog box appears. O Click the [Cancel] button to close the open window. 2 Click the [Start] button X select [All Programs] ([Programs] in other versions of Windows) X [Canon Utilities - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 19
Starting the EOS Viewer Utility Main window Main window tool bar Menu bar Image information display area Displays the [File], [Edit], [View], [Option], [Window], [Help] menus. Displays basic shot information. Path display Displays the folder path selected Histogram in the Folder Tree Area. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 20
button (W-26) Transfer images button (W-48) Erase images button (W-27) Thumbnail Frames button Shows/hides the information display frame of thumbnail images. Window button (W-25) EOS Capture button (W-88) Save File button (W-45) Rotate left 90 degrees button (W-26) Select images button (W-24 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 21
1Ds and EOS-1D RAW images, [Level] and [Target] are displayed. Reset to Shot Settings button (W-30) Preview checkbox (W-30) Color Space list box (W-43)* Color Tone list box (W-43)* Color Saturation list box (W-43)* Update button (W-30) O When you select a RAW image, the name of the camera on which - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 22
saved on a memory card in the camera to your computer, and display them on the main window. You can download images in the Folder folder. O With the EOS-1Ds and EOS-1D, double-click the camera icon X the [1] folder X the [DCIM] folder. ¿ The [xxxEOS1D] folder is displayed. ("xxx" represents a number - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 23
Supported Image Formats The images below can be displayed with the EOS Viewer Utility. Image Format RAW images taken with the EOS-1Ds Mark II, EOS-1D Mark II and EOS 20D File Extension .CR2 RAW images taken with the EOS-1Ds and EOS-1D RAW images taken with the EOS 10D, DIGITAL REBEL/300D DIGITAL - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 24
-1D Mark II are the same. O With the EOS-1Ds and EOS-1D, only [1] folder is displayed. O The "xxx" in the folder names represent a number between 100 to 999. O The "****" in the file names represent the factory-set characters that are unique to each camera. O The "YYYY" in the file names represent - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 25
Handling the Folders Registering Frequent Use Folder You can register frequent use folders as bookmark folders. 1 Display a folder to be registered (W-16). W 2 Register a folder as a bookmark folder. O Drag and that folder will not be deleted. Working with Images in the EOS Viewer Utility W-19 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 26
Mode You can select the display size and method of images. Main Window (Thumbnail Display) Various information can be displayed with images. Display number Numbers are assigned sequentially to the displayed images starting with the first image. Digital exposure compensation value (W-31) Recording - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 27
29) saved on a memory card in the camera directly. Work with the images saved on your computer from the memory card. O For some images, it may take some time to change to the high resolution image. O You can set the image displayed in the preview window to RAW image or the simultaneously recorded - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 28
Checking the AF Point The AF point used when the shot was taken can be displayed. 1 Display the image in the preview window (W-20). 2 Click the [AF point] button. ¿ The AF point is displayed. O Clicking the button again hides the AF point. When the shot was taken with automatic AF point selection - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 29
on the keyboard to select images. 3 Selecting Images in the Preview Window Click the target image. ¿ The selected image is displayed on the top window. Working with Images in the EOS Viewer Utility O When only one preview window is displayed, you can click the [Show Previous Image] button or the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 30
Selecting Images Attaching Check Marks to Images You can attach a check mark to the RAW image, allowing you to select images more easily. Click the [Add Check Mark] button. ¿ When the check mark is placed, the [ ] icon appears in the frame of the image. O Clicking the [Remove Check Mark] button - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 31
the image whose size is the desired size (W-23). Working with Images in the EOS Viewer Utility 2 Click [Standardize and store preview window size] from the menu that appears by clicking the [Window] button. ¿ All the displayed preview windows are set to the same size as the selected image. W-25 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 32
You can edit all the images that can be displayed in the EOS Viewer Utility. When multiple images are selected, the By setting [Auto rotate] setting to for the camera with this function, images shot in a vertical position are automatically displayed vertically. O If a rotated image is displayed - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 33
. The number of items displayed differs depending on the camera settings. O You can copy the information as text data and paste it into another application. O Clicking the [T] button can hide the Detailed Information display area. Working with Images in the EOS Viewer Utility Comment input box - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 34
was recorded. 1 Select an image with [ ] displayed, and click the [Play sound] button. ¿ EOS Viewer Utility to print images in index format. 1 Select images to be printed in index format (W-23). 2 Select the [File] menu X [Print Index]. ¿ Printing begins. If you wish to specify the printer settings - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 35
the images are processed, it takes a while to display them. O Approximate processing times Operation Details Switching from the main Transferring an image to the Camera Model window to the preview window specified retouching software 3 EOS-1Ds Mark II Approx. 5 seconds Approx. 45 seconds - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 36
is saved (W-45) or is transferred to retouching software (W-48). O The procedure below is an operating method in the preview window, but you can set processing parameters with the same operation in the main window also. However, in the main window, you cannot click the [Preview] checkbox and the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 37
Images in the EOS Viewer Utility Editing RAW Images Adjusting the Brightness (Digital Exposure Compensation) You can adjust the brightness of an image in the range of +/-2 stops in 0.1-stop increments. Drag the slider left or right to adjust the brightness. W Adjustment value set with the slider - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 38
white balance data on your computer (W-36) and register them on the camera (W-82). Selecting the White Balance You can select the white balance 3200 For white fluorescent light. Approx. 4000 When flash is used. Approx. 6000 You can manually set color temperature for 2800 to 10000K (in 100K - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 39
. O Enter the color temperature in the 3 [Color Temp.] input box in the range of 2800K to 10000K (in 100K increments). Working with Images in the EOS Viewer Utility W-33 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 40
not click the [Preview] checkbox, the adjusted white balance is applied immediately to the images. O When you use Click White Balance Function, [Click WB] is displayed in the [White Balance] list box. O You can also adjust by selecting the neutral gray part of the image. W-34 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 41
who understand the aim and effect of the color temperature converting filter or color compensating filter. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. W Drag the slider left and right to adjust the white balance. Dragging the slider toward B-side - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 42
White Balance Settings] button. ¿ The [Save As] dialog box appears. 3 Select the destination folder, enter the file name, and then click the [Save] button. ¿ The white balance data is saved. White balance data is not compatible with other cameras. White balance data is compatible with the EOS Viewer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 43
(W-39) and register it on the camera (W-80). 1 Click the [Tone Curve] button. ¿ The [Tone Curve] dialog box W appears. Tone curve settings list box Tone Curve 3 Working with Images in the EOS Viewer Utility Input box Open button (W-40) Shot Settings button Restores the image to its original - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 44
axis: Output level O To delete [Q], select [Q] and then press the key on the keyboard. O Up to four of [Q] can be shown. O With the EOS-1Ds and EOS-1D, up to four points can be shown. You cannot add or delete points. O Alternatively, you can adjust the tone curve by selecting [Q] on - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 45
] button. 3 ¿ The tone curve is saved. O Tone curve data for the EOS-1Ds Mark II and EOS-1D Mark II is compatible. O Tone curve data for the EOS-1Ds and EOS-1D is compatible. O Tone curve data is compatible with the EOS Viewer Utility for both Windows and Macintosh. Working with Images in the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 46
(output) in the form of a line graph. You can use the tone curve to adjust the image brightness and color saturation values that were set by the camera automatically when the shot was taken. The tone curve adjustment options include [RGB], which adjusts the input and output for the entire image in - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 47
the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. Select a setting from the list box. W Working with Images in the EOS Viewer the EOS-1Ds and EOS-1D RAW images, the [Standard] tab is not displayed. Proceed to step 2. 2 Select the color matrix from the list box. O With the EOS-1Ds and EOS-1D - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 48
and Adobe RGB, DCF 2.0 (Exif 2.21). With a printer that does not support the sRGB PC environments or DCF 2.0 (Exif 2.21), the images are printed . Reproduces low color saturation. Effective for making color tone moderate. Settings of Color Matrix Color Matrix 1 Standard 2 Portrait 3 H-saturat. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 49
-1D Mark II RAW images only. 1 Click the [Advanced] tab. ¿ The [Advanced] tab sheet W appears. 2 Select the settings from the list boxes. 3 Working with Images in the EOS Viewer Utility [-2] strongly adjusts the colors so that skin tones appear redder while [-1] makes the same adjustment less - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 50
the Sharpness You can adjust the edge sharpness of an image. O With the EOS-1Ds and EOS-1D RAW images, [Level] and [Target] are displayed and can be adjusted. Select a setting from the list box. O With the EOS-1Ds Mark II and EOS-1D Mark II RAW images, [Sharpness] can be adjusted. Higher values give - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 51
and click the [OK] button. ¿ The images are saved in the 3 selected folder. Working with Images in the EOS Viewer Utility Applies the settings and saves the image. Restores the settings to their original ones and closes the [Save File] dialog box. O When you convert RAW images to the TIFF or - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 52
saved. The name of the destination folder is displayed next to the [Browse] button. Select a setting for [Quality] (compression ratio) when you have saved files are shown below. Conversion Format Do not convert EOS-1Ds Mark II, EOS-1D Mark II EOS-1Ds, EOS-1D JPEG (8bit/ch) TIFF (8bit/ch) TIFF - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 53
file and the starting number used. A maximum of 9 digits can be specified. 3 This is the text inserted before the file number. You can enter up to 12 characters. When you enter the text, an example appears in Format Name RJ RT8 RT16, RT16L Working with Images in the EOS Viewer Utility W-47 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 54
Transferring Images to Retouching Software You can transfer the images displayed in the EOS Viewer Utility to retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Select images to be transferred (W-23). 2 Click the [Transfer images] button. ¿ The [Transfer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 55
EOS Viewer Utility Transferring Images to Retouching Software specifying [Output settings] and [File Name]. ¿ Photoshop starts up and displays the transferred images software such as Adobe Photoshop. O It is recommended that you should use the retouching software (third-party product) that supports - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 56
to their original ones and closes the [Preferences] dialog box. Displays the monitor profile set in the operating system. Settings are made in the operating system. Select whether the image displayed in the preview window is the RAW image or the simultaneously recorded JPEG image. You can - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 57
problem-free transmission of images. You can attach this IPTC information to JPEG images, or to TIFF and JPEG images that were converted from RAW images and saved with the EOS -3] tab to display the tab sheet settings data is compatible with the EOS Viewer Utility for both Windows and Macintosh. W-51 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 58
IPTC information for the next image. Displays the image No. in a sequence. Displays the IPTC information entered before the [Previous] or [Next] button was clicked. Applies the entered IPTC information to the image. Closes the [IPTC information] dialog box. Settings on the [IPTC-1] tab sheet You - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 59
the IPTC Information Settings on the [IPTC-2] tab sheet You can enter up to 10 characters. Select enter up to 11 characters. You can enter up to 32 characters. 3 Working with Images in the EOS Viewer Utility Settings on the [IPTC-3] tab sheet You can enter up to 3 characters. You can enter up to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 60
select [All Programs] ([Programs] in other versions of Windows) X [Canon Utilities] X [PhotoStitch] X [PhotoStitch]. ¿ [PhotoStitch Launcher] appears. 2 Click the [Merge Images] button. ¿ The PhotoStitch starts up. O Follow the instructions in the guidance window to merge the images. O Refer to the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 61
Specifying Camera Settings in the EOS Viewer Utility W This chapter describes how to specify the owner's name and date/time, the Personal Functions, the Parameters, and the Personal White Balance in the camera. Specifying the Camera Settings W-56 Basic Settings W-57 Personal Function Settings - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 62
. O Your camera model is displayed in EOS XXX. ¿ For Windows Me, the [Scanner and Camera Wizard] dialog box appears. O Click the [Cancel] button to close the open window. 2 Start up the EOS Viewer Utility (W-12). 3 Select the [Options] menu X [Camera Settings]. ¿ The [Camera settings] dialog box - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 63
of a memory card in the camera. 1 Display the [Camera settings] dialog box (W-56). 2 Select the [Basic settings] tab. ¿ The [Basic settings] tab sheet W appears. Specifying Camera Settings in the EOS Viewer Utility 3 Specify the basic settings. This box shows the camera model, body ID (serial - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 64
the saved settings. 1 Display the [Camera settings] dialog box (W-56). 2 Select the [Personal functions] tab. ¿ The [Personal functions] tab sheet appears. O With the EOS-1Ds and EOS-1D, select the [Detailed Settings] tab and click [Personal Functions] button. 3 From the list box, select a window in - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 65
[Exposure functions 2] W Specifies the metering mode for manual exposure (W-63) Sets the maximum and minimum shutter speeds to be used (W-63) Sets the maximum and minimum apertures to be used (W-64) Specifying Camera Settings in the EOS Viewer Utility [Exposure functions 3] Registers and switches - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 66
(W-74)*1, 2 *1 Compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. *2 Compatible with the EOS-1Ds only. [Combination] Allows you to check the settings (W-75) Allows you to save the settings (W-76) Allows you to load the saved settings (W-76) * Omission of P.Fn-11, 12, 22 and 29 To match the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 67
Check the settings and save them on your computer if necessary (W-75, W-76). 6 Click the [OK] button. O Applies the settings and closes the [Camera settings] dialog box. ¿ When a Personal Function is applied to the camera, < > appears on the LCD panel. Specifying Camera Settings in the EOS Viewer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 68
Settings" in the camera's Instruction Manual. Disables the shooting modes O Click the shooting modes you do not want to use. O Unwanted shooting modes can be skipped while you are selecting the shooting mode. O This makes selecting the desired shooting mode faster. O With the EOS-1Ds and EOS - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 69
is not a full-stop increment (such as 1/3200 sec.). O To ensure that a proper flash sync speed is set in the Program AE mode, a shutter speed range of 1/200 sec. to 1/80 sec. cannot be set with the EOS-1Ds Mark II, EOS1D Mark II and EOS-1Ds, and the range of 1/400 sec. to 1/80 sec. cannot be - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 70
metering mode, and exposure compensation amount. O Select settings that are appropriate for each shooting mode. O The modes and settings are preset with the camera. See "Registering the Modes and Settings with the Camera" for information on the camera procedures (W-65). O Convenient when you want to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 71
is used to register the manual exposure mode and a metering mode different from the one specified with P.Fn-03, you can select the metering mode specified with P.Fn03 by pressing the < > button. O If P.Fn-04 and/or P.Fn-05 has been set, set the shutter speed and aperture within the range specified - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 72
shutter button, bracketing repeats continuously in the currently selected drive mode. O This function is useful when you want to continuously repeat the bracketing sequence. Sets of bracketing. O Even when the setting is outside the bracketing level display range, the exposure is compensated as - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 73
toward a faster shutter speed. Program line shifted toward a slower shutter speed. With EF50mm f/1.4 USM lens Specifying Camera Settings in the EOS Viewer Utility O The program shift amount remains in effect until you set it back to the standard program manually or replace the battery or press - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 74
Function Settings Executes AI Servo AF continuous shooting giving priority to the drive speed O During continuous shooting, shutter release-priority super telephoto lenses. If autofocusing is attempted while the lens is way out of focus, the lens may stop operating. Focus manually until the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 75
preset focusing distance. Focusing detection is performed using the selected AF point. O Set the lens focus mode switch to and focus manually at the desired point of focus. W O Keep pressing the shutter button fully. O Using an accessory such as Remote Controller RS-80N3 which can lock the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 76
of continuous shots during continuous shooting. O By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable. O With the EOS-1Ds Mark II and EOS-1Ds, only [Continuous Shooting] is displayed. In AI Servo AF, it may not be possible to complete the selected - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 77
take the W picture. If you select continuous shooting, the camera operates normally. Setting mirror lockup with C.Fn-12 will further reduce the shooting noise. Changes the timer's time length 4 Specifying Camera Settings in the EOS Viewer Utility O After you press and release a button, the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 78
> button to illuminate the LCD panel until the bulb exposure ends. O Convenient when you want to monitor the elapsed bulb exposure time. Taking bulb shots for long periods speeds up battery charge depletion and reduces the number of available shots. Sets the default settings when the CLEAR button is - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 79
Specifying Camera Settings in the EOS Viewer Utility Personal Function Settings Enables the electronic dial's function to be used in the reverse direction W O The electronic dial's rotational function can be reversed for selecting the AF point and setting the shutter speed and aperture. O By - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 80
more details, refer to "Shooting Information Display" in the camera's Instruction Manual. O For the decision of the original image, you will need the dedicated accessory (optional). O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds only. The original decision data - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 81
[Combination] window appears. O With the EOS-1Ds and EOS-1D, select the [Combination] tab. 3 Check the settings, save and load them (W-76). O You can check the Personal Function settings and check if these settings are applied 4 on the camera. Specifying Camera Settings in the EOS Viewer Utility - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 82
. The Personal function settings are not compatible with a camera other than the one the function was set. O To update an existing file, click the [Save] button. O Personal Function settings data saved on your computer is compatible with the EOS Viewer Utility for both Windows and Macintosh. Loading - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 83
, and JPEG quality, and then apply these settings to the camera. 1 Display the [Camera settings] dialog box (W-56). 2 Select the [Shoot settings] tab. ¿ The [Shoot settings] tab sheet W appears. O With the EOS-1Ds and EOS-1D, select the [Detailed Settings] tab. 3 Click one of the buttons to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 84
the Processing Parameters" in the camera's Instruction Manual. 1 Click the [Parameters] button (W-77). ¿ The [Parameters settings] dialog box appears. 2 Select the [Set 1], [Set 2], or [Set 3] tab. 3 Specify the tone curve, sharpness, and contrast. ¿ With the EOS-1Ds Mark II and EOS-1D Mark II, the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 85
Deletes when selected set. *Displayed when connected to the EOS-1D. 4 Adds a new set. *Displayed when connected to the EOS-1D. Higher values give a lower compression ratio and higher image quality. 4 Click the [Apply to camera] button. ¿ The [Confirm settings] dialog box appears. 5 Confirm - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 86
[TCD 3]) on the camera, refer to "Setting the Processing Parameters" in the camera's Instruction Manual. O With the EOS-1D, only one tone curve Tone Curve] button on the displayed [Parameters Settings] dialog box. 2 Select the [TCD 1], [TCD 2] or [TCD 3] tab. O For the EOS-1D, proceed to step 3. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 87
the blue channel. Displays the green channel. Displays the red channel. 6 Click the [Apply to camera] button. ¿ The tone curve is registered on the camera. 4 7 Click the [Close] button. ¿ The [Tone curve settings] dialog box closes. Specifying Camera Settings in the EOS Viewer Utility W-81 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 88
a personal white balance setting to the camera, < > to < > is displayed on the panel located on the back of the camera. O For more information on setting the personal white balance on the camera, refer to "Selecting the White Balance" in the camera's Instruction Manual. 1 Click the [Personal - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 89
the [Open] or [Browse] button. ¿ The [Open] dialog box appears. Displays the setting status for the PC (Personal White Balance) registered on the camera along with their titles. Shot Settings W Specifying Camera Settings in the EOS Viewer Utility Enter a title for the personal white balance to be - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 90
the list box, which helps you to specify the settings. O For more information on setting the color matrix on the camera, refer to "Selecting the Color Matrix" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [Color matrix - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 91
strongly. [0] applies the standard color matching adjustment. 4 [+2] strongly adjusts the colors so that skin tones appear yellower while [+1] makes the same adjustment less strongly. Specifying Camera Settings in the EOS Viewer Utility W-85 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 92
S (Small), and then register the settings on the camera. O For more information on setting the JPEG quality on the camera, refer to "Setting the Image- recording Quality" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 93
of Windows) X [Canon Utilities] X [EOS Capture xx] ("xx" is the version) X [EOS Capture Readme]. Starting the EOS Capture W-88 Remote Shooting W-90 Single-frame Shooting W-90 Timer Shooting W-91 Interval Timer Shooting W-92 Specifying the Camera Settings W-93 5 Camera Settings W-93 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 94
dialog box on which the camera model is displayed appears. O Your camera model is displayed in EOS XXX. ¿ For Windows Me, the [Scanner and Camera Wizard] dialog box appears. O Click the [Cancel] button to close the open window. 2 Start up the EOS Viewer Utility (W-12). 3 Select the folder to save - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 95
vertical or horizontal position of the camera. * To use the rotation function, click [Rotate Image] checkbox in [Save settings] dialog box (W-96). Release button (W-90) 5 Remote Shooting in the EOS Capture Status Displays the status while specifying the settings. 5 Click the [Release] button to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 96
95) for information on how to specify the camera settings. O See "Specifying the Save Destination" (W-96) for information on how to specify the settings for saving images. 3 Click the [Release] button. ¿ The shot images are displayed in the EOS Viewer Utility and saved in your computer automatically - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 97
based on Canon testing standards. (Time until images appear in the EOS Viewer Utility main window after you uncheck the [Save also on the camera's memory manually and then take a shot. O If you take remote shooting while you are using the Explorer in the WIA Driver to display images on the camera - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 98
. ¿ Interval timer shooting is performed using the specified interval between shots and the specified number of shots. On some types of computers, if you set a short interval between shots and there is insufficient time to download and save the images, it may not be possible to take shots at the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 99
the camera settings. O With the EOS-1D, you can only check the content of the settings but you cannot specify settings. 1 Check the camera settings. W ' Color temp. Specify the color temperature in a range of 2800K to 10000K. Shutter speed Displays/specifies Tv (shutter speed). (Not displayed - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 100
are applied to the camera. O Before you specify the settings, be sure to check that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings. O Set functions which you cannot set with EOS Capture (drive mode, AF - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 101
function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Click the compensation position. W Compensate green. Compensate blue. Displays the compensation value. Compensate amber. Compensate magenta. 5 ¿ The changed settings are applied to the camera. Remote Shooting in the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 102
and click the [OK] button. Save settings dialog box Clicking the checkbox also saves images on the memory card in the camera. Allows you to change the destination folder to which images will be saved. The name of the destination folder is displayed next to the [Browse] button. Use this field - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 103
listed below. Readme: Click the [Start] button X select [Programs] X [Canon Utilities] X [EOS XXX TWAIN Driver] X [TWAIN Driver Readme]. Help: Displayed by clicking the [Help] button in the TWAIN Driver main window. Your camera model is displayed in EOS XXX. Downloading Images with the WIA - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 104
screen as "EOS XXX". Downloading with [Scanner and Camera Wizard] You can download JPEG images to your computer by following the instructions on the dialog boxes. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed appears. ¿ For Windows Me, the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 105
Driver 4 Select the image(s) you wish to download and click the [Next] button. ¿ The [Picture Name and Destination] dialog box appears. ¿ For Windows button and click the [Next] button. ¿ The [Completing the Scanner and Camera Wizard] dialog box appears. 6 7 Click the [Finish] button. ¿ The images - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 106
] folder and then click the [xxxEOS1D] folder (For Windows Me, double-click the [xxxEOS1D] folder). ("xxx" represents a number between 100 to 999.) O With the EOS-1Ds and EOS-1D, click the camera icon. ¿ The camera's images will be displayed as thumbnails in the Explorer view. 3 Save the image - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 107
your computer by using the TWAIN Driver-compatible retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed and the [Scanner and W Camera Wizard] dialog box appear - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 108
EOS XXX". O Refer to the Software Instruction Manual supplied with the camera for information about the TWAIN Driver for the EOS-1D. 1 Connect the camera to your computer (W-8). ¿ The dialog box on which the camera model is displayed appears. O Click the [Cancel] button to close all the open windows - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 109
Troubleshooting and Uninstallation W This chapter provides troubleshooting and describes the software uninstallation procedures. Troubleshooting W-104 Uninstalling the Software W-108 Uninstalling the Software W-108 Uninstalling the Driver W-109 Index ...W-110 7 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 110
off function will automatically switch the camera off. To prevent this, set the Auto power off function to [Off]. (Refer to "Menu Operations" in the camera's Instruction Manual.) O Does the [Add New Hardware Wizard] ([Found New Hardware Wizard] in Windows 2000) dialog box appear during installation - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 111
Troubleshooting I have installed the software but the camera and computer cannot communicate. O Is the driver installed? J The driver is required for communications between the camera and computer. When you want to communicate between the camera and computer, be sure to install the driver shown - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 112
the camera to your computer with the dedicated cable and set the camera's power switch to (W-8) and open [Device Manager] (W-107). Click the plus symbol [+] to the left of [Other devices] or [Unknown devices] and check whether the connected camera or [Canon Digital Camera] is displayed. W-106 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 113
driver. 1 Delete the camera or [Canon Digital Camera] displayed in [Other devices] or [Unknown devices]. 2 Disconnect the dedicated cable and delete the driver (W-109). 3 Re-install the driver (W-4). I connected the camera to the computer before W installing the software O Did you set the camera - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 114
. 1 Click the [Start] button X select [All Programs] ([Programs] in other versions of Windows) X [Canon Utilities] X [EOSViewerUtility xx] X [EOSViewerUtility Uninstall]. O The EOS Viewer Utility version information is displayed in xx. 2 Proceed with the uninstallation as directed by the on-screen - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 115
section explains how to uninstall the EOS-1Ds Mark II driver. For cameras other than the EOS-1Ds Mark II and EOS-1D Mark II, please refer to the Software Instruction Manual supplied with the camera. O For Windows XP Professional or Windows 2000, log in using computer Administrator privileges - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 116
29 EOS Capture Main Window W-89 EOS Viewer Utility Main Window ..........W-13 Exiting the EOS Capture W-89 Exiting the EOS Viewer Utility W-13 I ICC Profile W-45 Installing the Software W-4 M Merging Images with PhotoStitch ..........W-54 O Operation Flow 5 P Personal Function Settings W-58 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 117
the EOS Capture W-88 Starting the EOS Viewer Utility W-12 Supported Image Formats W-17 System Requirements W-2 T Thumbnail Display W-20 Transferring Images to Retouching Software W-48 Troubleshooting W-104 U Uninstalling Driver W-109 Software W-108 Index W 7 W-111 Troubleshooting and - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 118
- Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 119
Viewer Utility to download images to your computer, edit and save images, and transfer the downloaded images to the retouching software. 4 Specifying Camera Settings in the EOS Viewer Utility M-55 Describes how to specify the owner's name and date/time, the Personal Functions, the Parameters, and - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 120
9.0 to 9.2: Minimum 256 MB Interface FireWire (IEEE1394) EOS Viewer Utility: 100 MB or more Hard disk space EOS Capture: 600 MB or more PhotoStitch: 30 MB or more Display Resolution: 1024 768 or more Colors: Thousands or more O These software programs are not compatible with UFS (Unix File - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 121
Installing the Software This chapter describes how to install the bundled software. M Installing the Software M-4 1 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 122
O Check that your Macintosh complies with the system requirements for the software (M-2) as you follow the installation procedure. 1 Start up your Macintosh. O Quit any programs that are running. 2 Insert the CD (EOS DIGITAL Solution Disk). ¿ The CD icon appears on the desktop. 3 Start installation - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 123
click the [Next] button. M 6 Check the details of the License Agreement and then click the [Agree] button. 1 Installing the Software 7 Check the folder in which the software will be installed and then click the [Next] button. ¿ Installation begins. It takes approximately 2 to 3 minutes. M-5 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 124
Installing the Software 8 Finish the installation. O Click the [OK] button. ¿ After clicking the [OK] button in OS 9, the restart dialog box appears. Click [Yes] button to restart your computer. 9 Click the [Exit] button. 10Once the installation is complete, remove the CD. O Connect the camera to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 125
Preparation for Downloading Images This chapter explains how to connect the camera or a card reader (third- party product) to your computer. M Connecting the Camera to Your Computer M-8 Using Your Card Reader M-10 2 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 126
port). 2 Plug the dedicated cable into your camera. O Open the cover and plug the cable into the < > terminal. O With the EOS-1Ds and EOS-1D, you can connect either plug (6-pin IEEE1394 port). 3 Set the camera's power switch to . ¿ The camera is now ready to communicate with your computer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 127
cable, remove the battery, or remove the DC coupler. • Disconnect the AC adapter's plug or power cord. Before you perform the operations above, be sure to quit all the software. O You cannot communicate with the camera when you are displaying images on the camera's LCD monitor. Always connect - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 128
Reader Users with a third-party card reader can download images directly from a memory card to the computer. 1 Remove the memory card from the camera. 2 Load the card into the card reader. O Proceed to Chapter 3 continuously. For information on connecting the card reader to your computer, refer to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 129
to Saving Images M-45 the Front/Back of Window Stack. M-25 Transferring Images to Retouching Equalizing the Display Sizes of the Software M-48 Preview Window M-25 Specifying the Preferences ......... M-50 Editing Images M-26 Setting the IPTC Information ....... M-51 Protecting Images M-26 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 130
Connect the camera to your computer (M-8). 2 Double-click the [Canon EOS Viewer Utility] icon on the desktop. ¿ The main window appears. O You can also start the EOS Viewer Utility by double-clicking the [Canon Utilities] folder X the [EOS Viewer Utility] folder X the [EOS Viewer Utility] icon. M-12 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 131
the EOS Viewer Utility Main window Main window tool bar Image information display area Displays basic shot information. Histogram Shows the distribution of the brightness of an image. Selecting the tab switches the histogram display values between Brightness and RGB. Path display Displays the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 132
Starting the EOS Viewer Utility Main window tool bar Rotate left 90 degrees button (M-26) Show/Hide Thumbnail Frames button Shows/hides the information display frame of thumbnail images. Display Size list box (M-22) Window button (M-25) Rotate right 90 degrees button (M-26) Transfer images - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 133
the EOS-1Ds and EOS1D RAW images, [Level] and [Target] are displayed. Preview checkbox (M-30) Color Space list box (M-43)* Color Tone list box (M-43)* Color Saturation list box (M-43)* Update button (M-30) Reset to Shot Settings button (M-30) O When you select a RAW image, the name of the camera - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 134
the camera to your computer, and display them on the main window. Photo] in the folder name field here as an example.) 2 Display a folder to be copied. O Double-click the camera EOS-1Ds and EOS-1D, double-click the camera icon X the [1] folder X the [DCIM] folder. ¿ The [xxxEOS1D] folder is displayed - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 135
your computer. Supported Image Formats The images below can be displayed with the EOS Viewer Utility. Image Format RAW images taken with the EOS-1Ds Mark II, EOS-1D Mark II and EOS 20D RAW images taken with the EOS-1Ds and EOS-1D RAW images taken with the EOS 10D, DIGITAL REBEL/300D DIGITAL, D60 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 136
-1D Mark II are the same. O With the EOS-1Ds and EOS-1D, only [1] folder is displayed. O The "xxx" in the folder names represent a number between 100 to 999. O The "****" in the file names represent the factory-set characters that are unique to each camera. O The "YYYY" in the file names represent - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 137
Handling the Folders Registering Frequent Use Folder You can register frequent use folders as bookmark folders. 1 Display a folder to be registered (M-16). 2 Register a folder as a bookmark folder. O Drag and drop folder will not be deleted. Working with Images in the EOS Viewer Utility M-19 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 138
Mode You can select the display size and method of images. Main Window (Thumbnail Display) Various information can be displayed with images. Display number Numbers are assigned sequentially to the displayed images starting with the first image. Digital exposure compensation value (M-31) Recording - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 139
29) saved on a memory card in the camera directly. Work with the images saved on your computer from the memory card. O For some images, it may take some time to change to the high resolution image. O You can set the image displayed in the preview window to RAW image or the simultaneously recorded - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 140
Checking the AF Point The AF point used when the shot was taken can be displayed. 1 Display the image in the preview window (M-20). 2 Click the [Display AF point] button. ¿ The AF point is displayed. O Clicking the button again hides the AF point. When the shot was taken with automatic AF point - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 141
the keyboard to select images. 3 Selecting Images in the Preview Window Click the target image. ¿ The selected image is displayed on the top window. Working with Images in the EOS Viewer Utility O When only one preview window is displayed, you can click the [Select Previous Image] button or the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 142
Selecting Images Attaching Check Marks to Images You can attach a check mark to the RAW image, allowing you to select images more easily. Click the [Add Check Mark] button. ¿ When the check mark is placed, the [ ] icon appears in the frame of the image. O Clicking the [Remove Check Mark] button - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 143
the image whose size is the desired size (M-23). Working with Images in the EOS Viewer Utility 2 Click [Standardize and store preview window size] from the menu that appears by clicking the [Window] button. ¿ All the displayed preview windows are set to the same size as the selected image. M-25 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 144
You can edit all the images that can be displayed in the EOS Viewer Utility. When multiple images are selected, the By setting [Auto rotate] setting to for the camera with this function, images shot in a vertical position are automatically displayed vertically. O If a rotated image is displayed - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 145
Working with Images in the EOS Viewer Utility Editing Images Deleting Images You can move unnecessary images to and input comments. Detailed Information display area O The shooting information is displayed. The number of items displayed differs depending on the camera settings. O You can copy the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 146
which sound was recorded. 1 Select an image with [ ] displayed, and click the [Play sound] button. ¿ The [Audio [ ] button to resume. Indicates the sound playback position. Printing Images You can use the EOS Viewer Utility to print images in index format. 1 Select images to be printed in index - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 147
When the images are processed, it takes a while to display them. O Approximate processing times Operation Details Switching from the main Transferring an image to the Camera Model window to the preview window specified retouching software EOS-1Ds Mark II Approx. 8 seconds Approx. 50 seconds - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 148
is saved (M-45) or is transferred to retouching software (M-48). O The procedure below is an operating method in the preview window, but you can set processing parameters with the same operation in the main window also. However, in the main window, you cannot click the [Preview] checkbox and the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 149
the Brightness (Digital Exposure Compensation) You can adjust the brightness of an image in the range of +/-2 stops in 0.1-stop increments. Drag the slider left or right to adjust the brightness. Adjustment value set with the slider. M 3 Working with Images in the EOS Viewer Utility M-31 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 150
white balance data on your computer (M-36) and register them on the camera (M-82). Selecting the White Balance You can select the white balance 3200 For white fluorescent light. Approx. 4000 When flash is used. Approx. 6000 You can manually set color temperature for 2800 to 10000K (in 100K - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 151
. O Enter the color temperature in the 3 [Color Temp.] input box in the range of 2800K to 10000K (in 100K increments). Working with Images in the EOS Viewer Utility M-33 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 152
not click the [Preview] checkbox, the adjusted white balance is applied immediately to the images. O When you use Click White Balance Function, [White Point] is displayed in the [White Balance] list box. O You can also adjust by selecting the neutral gray part of the image. M-34 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 153
who understand the aim and effect of the color temperature converting filter or color compensating filter. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. Drag the slider left and right to adjust the white balance. M The corrected value specified using - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 154
White Balance Settings] button. ¿ The [Save] dialog box appears. 3 Select the destination folder, enter the file name, and then click the [Save] button. ¿ The white balance data is saved. White balance data is not compatible with other cameras. White balance data is compatible with the EOS Viewer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 155
tone curve on your computer (M-39) and register it on the camera (M-80). 1 Click the [Adjust Tone Curve] button. ¿ The [Tone Curve] dialog box appears. M Tone curve settings list box Tone Curve 3 Working with Images in the EOS Viewer Utility Input box Read button (M-40) Output box Save button - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 156
axis: Output level O To delete [Q], select [Q] and then press the key on the keyboard. O Up to four of [Q] can be shown. O With the EOS-1Ds and EOS-1D, up to four points can be shown. You cannot add or delete points. O Alternatively, you can adjust the tone curve by selecting [Q] on - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 157
] button. ¿ The tone curve is saved. O Tone curve data for the EOS-1Ds Mark II and EOS-1D Mark II is compatible. O Tone curve data for the EOS-1Ds and EOS-1D is compatible. 3 O Tone curve data is compatible with the EOS Viewer Utility for both Windows and Macintosh. Working with Images in the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 158
(output) in the form of a line graph. You can use the tone curve to adjust the image brightness and color saturation values that were set by the camera automatically when the shot was taken. The tone curve adjustment options include [RGB], which adjusts the input and output for the entire image in - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 159
O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II RAW images only. Select a setting from the list box. M ] the EOS-1Ds and EOS-1D RAW images, the [Standard] tab is not displayed. Proceed to step 2. 2 Select the color matrix from the list box. O With the EOS-1Ds and EOS-1D - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 160
Adobe RGB, DCF 2.0 (Exif 2.21). With a printer that does not support the sRGB computer environments or DCF 2.0 (Exif 2.21), the images are printed . Reproduces low color saturation. Effective for making color tone moderate. Settings of Color Matrix Color Matrix 1 Standard 2 Portrait 3 H-saturat. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 161
-1D Mark II RAW images only. 1 Click the [Advanced] tab. ¿ The [Advanced] tab sheet appears. M 2 Select the settings from the list boxes. 3 Working with Images in the EOS Viewer Utility [-2] strongly adjusts the colors so that skin tones appear redder while [-1] makes the same adjustment less - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 162
the Sharpness You can adjust the edge sharpness of an image. O With the EOS-1Ds and EOS-1D RAW images, [Level] and [Target] are displayed and can be adjusted. Select a setting from the list box. O With the EOS-1Ds Mark II and EOS-1D Mark II RAW images, [Sharpness] can be adjusted. Higher values give - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 163
[OK] button. ¿ The images are saved in the 3 selected folder. Working with Images in the EOS Viewer Utility Restores the settings to their original ones and closes the [Save File] dialog box. Applies the settings and saves the image. O When you convert RAW images to the TIFF or JPEG images and - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 164
saved. The name of the destination folder is displayed next to the [Browse] button. Select a setting for [Quality] (compression ratio) when you have saved files are shown below. Conversion Format Do not convert EOS-1Ds Mark II, EOS-1D Mark II EOS-1Ds, EOS-1D JPEG (8bit/ch) TIFF (8bit/ch) TIFF - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 165
file and the starting number used. A maximum of 9 digits can be specified. This is the text inserted before the file number. You can enter up to 12 characters. When you enter the text, an example appears in Format Name RJ RT8 RT16, RT16L M 3 Working with Images in the EOS Viewer Utility M-47 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 166
Transferring Images to Retouching Software You can transfer the images displayed in the EOS Viewer Utility to retouching software. The descriptions given here use Adobe Photoshop 7.0, as an example. 1 Select images to be transferred (M-23). 2 Click the [Transfer images] button. ¿ The [Transfer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 167
EOS Viewer Utility O See "Saving Images" (M-45) for the procedure for specifying [Output settings] and [File Name]. ¿ Photoshop starts up and displays retouching software such as Adobe Photoshop. O It is recommended that you should use the retouching software (third-party product) that supports 16- - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 168
. Settings are made in the operating system. Select whether the image displayed in the preview window is the RAW image or the simultaneously recorded JPEG image. Allows you to select whether the folder that was open the last time is displayed or the specified folder is always displayed when the EOS - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 169
problem-free transmission of images. You can attach this IPTC information to JPEG images, or to TIFF and JPEG images that were converted from RAW images and saved with the EOS or [IPTC-3] tab to display the tab sheet, and settings data is compatible with the EOS Viewer Utility for both Windows and - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 170
IPTC information for the next image. Displays the image No. in a sequence. Displays the IPTC information entered before the [Previous] or [Next] button was clicked. Applies the entered IPTC information to the image. Closes the [IPTC information] dialog box. Settings on the [IPTC-1] tab sheet You - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 171
to 8 characters. You can enter up to 11 characters. M You can enter up to 32 characters. 3 Settings on the [IPTC-3] tab sheet You can enter up to 3 characters. You can enter up to 32 to 32 characters. Working with Images in the EOS Viewer Utility You can enter up to 32 characters. M-53 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 172
panorama shot. 1 Double-click the [Canon Utilities] folder X the [PhotoStitch] folder X the [PhotoStitch Launcher] icon. ¿ [PhotoStitch Launcher] appears. 2 Click the [Merge Images] button. ¿ The PhotoStitch starts up. O Follow the instructions in the guidance window to merge the images. O Refer to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 173
Camera Settings in the EOS Viewer Utility This chapter describes how to specify the owner's name and date/time, the Personal Functions, the Parameters, and the Personal White Balance in the camera. M Specifying the Camera Settings M-56 Basic Settings M-57 Personal Function Settings - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 174
white balance (M-82), color matrix (M-84), and JPEG quality (M-86) on the camera. O With the EOS-1Ds and EOS-1D, only the [Basic Settings] tab and [Detailed Settings] tab are displayed. Also, in [Detailed Settings] tab sheet, the Personal Functions (M-58), Parameters (M78) and Personal White Balance - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 175
date and time from your computer. 4 The battery level of the camera is indicated by [ ] or [ ]. When you are using the DC Coupler Kit, [ ] is displayed. Applies the settings that you have specified in the [Basic settings] tab sheet to the camera. Restores the parameters to their original ones and - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 176
the saved settings. 1 Display the [Camera settings] dialog box (M-56). 2 Select the [Personal functions] tab. ¿ The [Personal functions] tab sheet appears. O With the EOS-1Ds and EOS-1D, select the [Detailed Settings] tab and click [Personal Functions] button. 3 From the list box, select a window in - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 177
below in the different windows. [Exposure functions 1] Disables the shooting modes (M-62) Disables the metering modes (M-62) [Exposure functions 2] Specifies the metering mode for manual exposure (M-63) Sets the maximum and minimum shutter speeds to be used (M-63) Sets the maximum and minimum - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 178
(M-74)*1, 2 *1 Compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. *2 Compatible with the EOS-1Ds only. [Combination] Allows you to check the settings (M-75) Allows you to save the settings (M-76) Allows you to load the saved settings (M-76) * Omission of P.Fn-11, 12, 22 and 29 To match the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 179
the settings and save them on your computer if necessary (M-75, M-76). 6 Click the [OK] button. O Applies the settings and closes the [Camera settings] dialog box. 4 ¿ When a Personal Function is applied to the camera, < > appears on the LCD panel. Specifying Camera Settings in the EOS Viewer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 180
Settings" in the camera's Instruction Manual. Disables the shooting modes O Click the shooting modes you do not want to use. O Unwanted shooting modes can be skipped while you are selecting the shooting mode. O This makes selecting the desired shooting mode faster. O With the EOS-1Ds and EOS - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 181
is not a full-stop increment (such as 1/3200 sec.). O To ensure that a proper flash sync speed is set in the Program AE mode, a shutter speed range of 1/200 sec. to 1/80 sec. cannot be set with the EOS-1Ds Mark II, EOS1D Mark II and EOS-1Ds, and the range of 1/400 sec. to 1/80 sec. cannot be - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 182
metering mode, and exposure compensation amount. O Select settings that are appropriate for each shooting mode. O The modes and settings are preset with the camera. See "Registering the Modes and Settings with the Camera" for information on the camera procedures (M-65). O Convenient when you want to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 183
is used to register the manual exposure mode and a metering mode different from the one specified with P.Fn-03, you can select the metering mode specified with P.Fn- 03 by pressing the < > button. O If P.Fn-04 and/or P.Fn-05 has been set, set the shutter speed and aperture within the range specified - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 184
shutter button, bracketing repeats continuously in the currently selected drive mode. O This function is useful when you want to continuously repeat the bracketing sequence. Sets of bracketing. O Even when the setting is outside the bracketing level display range, the exposure is compensated as - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 185
faster shutter speed. Program line shifted toward a slower shutter speed. Shutter Speed With EF50mm f/1.4 USM lens Specifying Camera Settings in the EOS Viewer Utility O The program shift amount remains in effect until you set it back to the standard program manually or replace the battery or - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 186
Function Settings Executes AI Servo AF continuous shooting giving priority to the drive speed O During continuous shooting, shutter release-priority super telephoto lenses. If autofocusing is attempted while the lens is way out of focus, the lens may stop operating. Focus manually until the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 187
an accessory such as Remote Controller RS-80N3 which can lock the shutter button is recommended. Specifying Camera Settings in the EOS Viewer " in the camera's Instruction Manual) O If automatic AF point selection has been preset at [AF frame registration] setting, the preset setting remains valid. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 188
of continuous shots during continuous shooting. O By reducing the maximum continuous shooting speed, AI Servo AF continuous shooting can be more stable. O With the EOS-1Ds Mark II and EOS-1Ds, only [Continuous Shooting] is displayed. In AI Servo AF, it may not be possible to complete the selected - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 189
time will consume more battery power. The battery life will become shorter and fewer number of shots can be taken with the battery. To turn off the function's activation time midway, press the < button or < > button. > button, < > Specifying Camera Settings in the EOS Viewer Utility M-71 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 190
> button to illuminate the LCD panel until the bulb exposure ends. O Convenient when you want to monitor the elapsed bulb exposure time. Taking bulb shots for long periods speeds up battery charge depletion and reduces the number of available shots. Sets the default settings when the CLEAR button is - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 191
can be reversed for selecting the AF point and setting the shutter speed and aperture. 4 O By matching the dial's rotation set exposure compensation. O This prevents exposure compensation from being set accidentally while the AF point is being selected. Specifying Camera Settings in the EOS - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 192
more details, refer to "Shooting Information Display" in the camera's Instruction Manual. O For the decision of the original image, you will need the dedicated accessory (optional). O This function is compatible with the EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds only. The original decision data - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 193
[Combination] window M appears. O With the EOS-1Ds and EOS-1D, select the [Combination] tab. 3 Check the settings, save and load them (M-76). O You can check the Personal Function settings and check if these settings are applied 4 on the camera. Specifying Camera Settings in the EOS Viewer - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 194
. The Personal function settings are not compatible with a camera other than the one the function was set. O To update an existing file, click the [Save] button. O Personal Function settings data saved on your computer is compatible with the EOS Viewer Utility for both Windows and Macintosh. Loading - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 195
, and JPEG quality, and then apply these settings to the camera. 1 Display the [Camera settings] dialog box (M-56). 2 Select the [Shoot settings] tab. ¿ The [Shoot settings] tab sheet appears. M O With the EOS-1Ds and EOS-1D, select the [Detailed Settings] tab. 3 Click one of the buttons to - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 196
the Processing Parameters" in the camera's Instruction Manual. 1 Click the [Parameters] button (M-77). ¿ The [Parameters settings] dialog box appears. 2 Select the [Set 1], [Set 2], or [Set 3] tab. 3 Specify the tone curve, sharpness, and contrast. ¿ With the EOS-1Ds Mark II and EOS-1D Mark II, the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 197
80). Deletes the selected set. *Displayed when connected to the EOS-1D. Adds a new set. *Displayed when connected to the EOS-1D. 4 Higher values give a lower compression ratio and higher image quality. 4 Click the [Apply to camera] button. ¿ The [Confirm settings] dialog box appears. 5 Check - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 198
[TCD 3]) on the camera, refer to "Setting the Processing Parameters" in the camera's Instruction Manual. O With the EOS-1D, only one tone curve Tone Curve] button on the displayed [Parameters Settings] dialog box. 2 Select the [TCD 1], [TCD 2] or [TCD 3] tab. O For the EOS-1D, proceed to step 3. - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 199
the blue channel. Displays the green channel. Displays the red channel. M 6 Click the [Apply to camera] button. ¿ The tone curve is registered on the camera. 4 7 Click the [Close] button. ¿ The [Tone curve settings] dialog box closes. Specifying Camera Settings in the EOS Viewer Utility M-81 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 200
a personal white balance setting to the camera, < > to < > is displayed on the panel located on the back of the camera. O For more information on setting the personal white balance on the camera, refer to "Selecting the White Balance" in the camera's Instruction Manual. 1 Click the [Personal - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 201
3 Click the [Open] or [Browse] button. ¿ The [Open] dialog box appears. Displays the setting status for the PC (Personal White Balance) registered on the camera along with their titles. M Specifying Camera Settings in the EOS Viewer Utility Registers the selected PC Enter a title for the personal - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 202
the list box, which helps you to specify the settings. O For more information on setting the color matrix on the camera, refer to "Selecting the Color Matrix" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the [Color matrix - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 203
appear yellower while [+1] makes the same adjustment 4 less strongly. 4 Click the [Apply to camera] button. ¿ The color matrix is registered on the camera. 5 Click the [Close] button. ¿ The [Color matrix settings] dialog box closes. Specifying Camera Settings in the EOS Viewer Utility M-85 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 204
S (Small), and then register the settings on the camera. O For more information on setting the JPEG quality on the camera, refer to "Setting the Image- recording Quality" in the camera's Instruction Manual. O This function is compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. 1 Click the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 205
. Readme: Double-click the [Canon Utilities] folder X the [EOS Capture] folder X [ReadMe]. Starting the EOS Capture M-88 Remote Shooting M-90 Single-frame Shooting M-90 Timer Shooting M-91 Interval Timer Shooting M-92 Specifying the Camera Settings M-93 Camera Settings M-93 White Balance - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 206
up the EOS Viewer Utility (M-12). 3 Select the folder to save the image in. O Select a folder in the Tree View Area to save the image in, or create a new folder (M-16). (The [Capture] folder is created here as an example.) 4 Click the [EOS Capture] button. ¿ The EOS Capture main window appears. M-88 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 207
of the vertical or horizontal position of the camera. * To use the rotation function, click [On] checkbox in [Save settings] dialog box (M-96). Release button (M-90) 5 Remote Shooting in the EOS Capture Status Displays the status while specifying the settings. 5 Click the [Release] button to take - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 208
95) for information on how to specify the camera settings. O See "Specifying the Save Destination" (M-96) for information on how to specify the settings for saving images. 3 Click the [Release] button. ¿ The shot images are displayed in the EOS Viewer Utility and saved in your computer automatically - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 209
above. • Transfer times are based on Canon testing standards. (Time until images appear in the EOS Viewer Utility main window after you uncheck the [Save M also on the camera's memory card] checkbox and click the [Release] button in the EOS Capture main window using the following: OS: OS X 10 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 210
. ¿ Interval timer shooting is performed using the specified interval between shots and the specified number of shots. On some types of computers, if you set a short interval between shots and there is insufficient time to download and save the images, it may not be possible to take shots at the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 211
specify the camera settings. O With the EOS-1D, you can only check the content of the settings but you cannot specify settings. 1 Check the camera settings. M ' Shutter speed Color temp. Specify the color temperature in a range of 2800K to 10000K. Shooting mode Displays/specifies the shooting - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 212
are applied to the camera. O Before you specify the settings, be sure to check that the camera is ready for shooting. If the camera is not ready for shooting (the lens is not attached, etc.), you cannot make some of the settings. O Set functions which you cannot set with EOS Capture (drive mode, AF - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 213
compatible with the EOS-1Ds Mark II and EOS-1D Mark II only. Click the compensation position. Compensate green. M Compensate blue. Displays the compensation value. Compensate amber. Compensate magenta. ¿ The changed settings are applied to the camera. 5 Remote Shooting in the EOS Capture M-95 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 214
and click the [OK] button. Save settings dialog box Clicking the checkbox also saves images on the memory card in the camera. Allows you to change the destination folder to which images will be saved. The name of the destination folder is displayed next to the [Browse] button. Use this field - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 215
Troubleshooting and Uninstallation This chapter provides troubleshooting and describes the software uninstallation procedures. M Troubleshooting M-98 Uninstalling the Software M-100 Index ...M-101 6 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 216
or load a fully charged battery into the camera before connecting it to your computer. O Do you have more than one camera connected to your computer? If you connect more than one camera to the same computer, the driver and camera may not operate normally. J Quit the software and disconnect all the - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 217
• com.canon.EOS Capture.plist • PhotoStitch Pref Preferences file shared by all software programs for communications (OS X only) Preferences file for the EOS Viewer Utility Preferences file for the EOS Capture (OS X only) Preferences file for the PhotoStitch 6 Troubleshooting and Uninstallation - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 218
the [Special] menu.) and empty the Trash. You cannot reinstall the software until you have emptied the Trash. 1 Display the folder in which the software is saved. O Open the [Canon Utilities] folder. 2 Drag the folder for the software to be uninstalled to the Trash. 3 Select the [Finder] menu on - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 219
Digital Exposure Compensation M-31 Selecting the Color Matrix M-41 Downloading Images M-16 Selecting the Contrast M-41 E Selecting the Display Size M-22 Editing Images M-26 Selecting the Sharpness M-44 Editing RAW Images M-29 Setting the IPTC Information M-51 EOS Capture Main Window - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 220
the Processing Parameters . M-30 Starting the EOS Capture M-88 Starting the EOS Viewer Utility M-12 Supported Image Formats M-17 System Requirements M-2 T Thumbnail Display M-20 Transferring Images to Retouching Software M-48 Troubleshooting M-98 U Uninstalling the Software M-100 M-102 - Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 221
- Canon EOS D60 | EOS DIGITAL Software Instruction Manual (EOS Viewer Utility 1.2. - Page 222
, Minato-ku, Tokyo 108-8011, Japan • This Instructions booklet is current as of September 2004. For information on using the camera with system accessories introduced after this date, contact your nearest Canon Service Center. • The camera's specifications and physical appearance are subject to
![](/manual_guide/products/canon-9442a008-eos-digital-software-instruction-manual-eos-viewer-utility-121-updater-6887e74/1.png)