Canon LV-7392A Specifications

Canon LV-7392A Manual

Get Canon LV-7392A PDF manuals and user guides View all Canon LV-7392A manuals
Add to My Manuals
Save this manual to your list of manuals

Canon LV-7392A manual content summary:

  • Canon LV-7392A | Specifications - Page 1
    MULTIMEDIA PROJECTOR LV-7292A/LV-7297A LV-7298A/LV-7392A LV-7393A/LV-8227A LV-7292M/LV-7297M LV-8227M EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS Revision 1 © 2012 CANON INC. YT1-1445-000
  • Canon LV-7392A | Specifications - Page 2
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications Input Status Read Command Table 7 6.5 Screen Status Read Command Table 8 6.6 Lamp Status Read Command Table 8 6.7 Sound Status Read Command Table 8 6.8 Setting
  • Canon LV-7392A | Specifications - Page 3
    8.7 Screen Control Command (LV-7292A/LV-7297A/LV-7298A/LV-7392A/LV-7393A/LV-7297M/LV-7292M).. 23 8.7.2 CF_SCREEN Command (LV-8227A/8227M 24 8.7.3 8.7.11 CF_REAR Command 27 8.7.12 CF_SCREENASPECT Command (LV-8227A/ LV-8227M 28 8.8 Lamp Command ...28 8.8.1 CF_LAMPH Command 28 8.8.2 CF_LAMPMODE
  • Canon LV-7392A | Specifications - Page 4
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.10.22 CF_KEYDIS Command 36 8.10.23 CF_PJPINCODE Command 37 8.10.24 CF_FANMODE Command 37 8.10.25 CF_FANCONTROL Command
  • Canon LV-7392A | Specifications - Page 5
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.8.2 CR_SCREEN Command (LV-8227A/ LV CR_REAR Command 54 9.8.10 CR_SCCREENASPECT Command (LV-8227A/ LV-8227M 54 9.9 Lamp Status Read Command 55 9.9.1 CR_LAMPREPL
  • Canon LV-7392A | Specifications - Page 6
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command 68 9.12.8 CR_SERIALNO Command 68 -vi-
  • Canon LV-7392A | Specifications - Page 7
    /LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̍ɽOverview 1.1. This Functional Specification defines communication functions for LV-7292A/7297A/7392A/7393A/7398A/8227A/7292M/7297M/8227M 1.2 Compatible to Firmware Ver. 1.x of the projector
  • Canon LV-7392A | Specifications - Page 8
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional be changed in service mode. 2.2 Connection Dedicated serial cable must be used for a connection to a computer and a projector. PC     COM 1    Projector Control Port (D-Sub
  • Canon LV-7392A | Specifications - Page 9
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV return (0X0D) after the projector receives the first data PC → Projector     "CF_BRIGHT_032" CR  Next Command Projector → PC command before receiving a response, the projector may not operate properly, except when
  • Canon LV-7392A | Specifications - Page 10
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̐ɽName Definition 1. Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller for the incoming command is represented
  • Canon LV-7392A | Specifications - Page 11
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̑ɽFunctional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1[CR] CF_CONT_%1[CR] CF_COLOR_%1[CR] CF_TINT_%1[CR] CF_IRIS_%1[CR]
  • Canon LV-7392A | Specifications - Page 12
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 5.4 Screen Aspect function 5.5 Lamp Command Table Execute command CF_LAMPH_%1[CR] CF_LAMPMODE_%1[CR] Item Reset total running time of each lamp Select Lamp mode 5.6
  • Canon LV-7392A | Specifications - Page 13
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̒ɽStatus Read Command Table 6.1 Image Status Read Command Table Status read command CR_BRIGHT[CR] CR_CONT[CR] CR_COLOR[CR] CR_TINT[
  • Canon LV-7392A | Specifications - Page 14
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications Lamp replacement time Get lamp total running time Get corresponding lamp use time Get Lamp Mode status Get lamp lighting status Get projector total running time Get lamp
  • Canon LV-7392A | Specifications - Page 15
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV HDMI Sound Get setting status of Power management Get setting time for Power management Get setting status of Direct [CR] CR_SERIALNO[CR] Item Get setting status of Projector behavior Get Signal Status if there is a signal
  • Canon LV-7392A | Specifications - Page 16
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̓ɽError Code Table Error Code ? 101 Contents -When the received data cannot be decoded -Parameter determination error (digit number
  • Canon LV-7392A | Specifications - Page 17
    60 seconds after Power Failure occurred) Power Save / Cooling down in process Power Save in process C00: POWER ON C00: POWER ON (Terminates Countdown) C01: POWER OFF C02: POWER OFF (Terminates Countdown) N/A N/A N/A N/A N/A C00: POWER ON C01: POWER OFF Note:) When the projector receives the other
  • Canon LV-7392A | Specifications - Page 18
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.4 it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status.
  • Canon LV-7392A | Specifications - Page 19
    8.4.5 LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications CF_IRIS Command (n/a LV-7292M/ LV-7297M/ LV-8227M) Command "CF_IRIS_%1l[CR] %1 "ON Set Iris to On "OFF Set Iris to Off Details Set Iris. Projector does
  • Canon LV-7392A | Specifications - Page 20
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.4.8 . (Available only in the normal Power ON status) The value set by this command will not be saved to the projector. Therefore, when turning into Standby-
  • Canon LV-7392A | Specifications - Page 21
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.4.11 it resets when projector turning into Standby status or ALL is OFF. (The value is held in Suspend mode.) This command is available in normal Power ON status.
  • Canon LV-7392A | Specifications - Page 22
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.4.13 CF_COLBOARD effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR]
  • Canon LV-7392A | Specifications - Page 23
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.5 PC command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR]
  • Canon LV-7392A | Specifications - Page 24
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.5.4 command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR]
  • Canon LV-7392A | Specifications - Page 25
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.5.7 command so that it resets when projector turning into Standby status or ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR
  • Canon LV-7392A | Specifications - Page 26
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.6 Input Control operation as "INPUT" button of the projector and Remote Control. This command is available in normal Power ON status. Acceptable "000"[CR] Response
  • Canon LV-7392A | Specifications - Page 27
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.6.3 CF_INPUT1 Command %1 at the same time. Details This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR]
  • Canon LV-7392A | Specifications - Page 28
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional %1 is inappropriate for selected Input, the projector returns "101"[CR] and the command is not executed This command is available in normal Power ON status. Note1) "NTSC" / "
  • Canon LV-7392A | Specifications - Page 29
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.7 Screen Control Command 8.7.1 CF_SCREEN Command ( LV-7292A/LV-7297A/LV-7298A/LV-7392A/LV-7393A/LV-7297M/LV the projector returns available in normal Power ON status.
  • Canon LV-7392A | Specifications - Page 30
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications CF_SCREEN Command (LV for selected Input, the projector returns "101" [CR] . This command is available in normal Power ON status. Response Note) When Input
  • Canon LV-7392A | Specifications - Page 31
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.7.4 CF_VSCALE Command Command " is available in normal Power ON status. Note1) When Screen setting is not in Custom mode, projector changes image mode into Custom
  • Canon LV-7392A | Specifications - Page 32
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.7.6 CF_HSCALE Command Command " available in normal Power ON status. Details Note1) When Screen setting is not in Custom mode, projector changes image mode into
  • Canon LV-7392A | Specifications - Page 33
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional its setting is effective even after ALL is OFF This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.7.11 CF_REAR Command
  • Canon LV-7392A | Specifications - Page 34
    (LV-8227A/ LV-8227M) Command "CF_SCREENASPECT_%1"[CR] "43MODE Set 4:3 mode %1 "169MODE Set 16:9 mode "1610MODE Set 16:10 mode Details Screen Aspect setting This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.8 Lamp Command
  • Canon LV-7392A | Specifications - Page 35
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.9 . The value set by this command is stored in Projector. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error
  • Canon LV-7392A | Specifications - Page 36
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.9.5 position Details Response Change the menu position This command is available in normal Power ON status. Menu postion set by this command is stored in EEPROM and
  • Canon LV-7392A | Specifications - Page 37
    Auto Keystone function to Manual "OFF Set Auto Keystone function to OFF Details Set Keystone function of Auto setup This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Keystone OFF command
  • Canon LV-7392A | Specifications - Page 38
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.10.7 CF_BACKGND by this command is stored in EEPROM and the setting remains even after the power is turned to ALL OFF status. *When ˋ1="USER" is received, error code
  • Canon LV-7392A | Specifications - Page 39
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV after ALL is OFF This command is available in normal Power ON status. %1--- Set LOGO PIN CODE Details - it does not release LOGO LOCK. (LOGO LOCK continues.) Projector returns Error Code "101" by receiving USER in %2 when
  • Canon LV-7392A | Specifications - Page 40
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.10.12 CF_P-MANE Command Command "CF_PʵMANE_%1"[CR] "OFF Set Power Management to OFF "READY Set Power Management to Ready %1 "SHUTDOWN Set Power Management to
  • Canon LV-7392A | Specifications - Page 41
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional is effective even after ALL is OFF. This command is available in normal Power ON status. Closed caption is available under conditions below; Entered signal is appropriate (
  • Canon LV-7392A | Specifications - Page 42
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.22 CF_KEYDIS Command Command "CF_KEYDIS_%1"[CR] "NONE RC & Projector keys are
  • Canon LV-7392A | Specifications - Page 43
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV it is necessary to transmit this command every time lamp turns on. Acceptable "000"[CR] Response Unacceptable " ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "
  • Canon LV-7392A | Specifications - Page 44
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications setting is effective even after ALL is OFF. This command is available in normal Power ON status. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.27
  • Canon LV-7392A | Specifications - Page 45
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications %1"[CR] "ON Power ON projector "OFF Power OFF Projector Note1) Countdown can be terminated by sending this command. %1 Note2) Projector returns error code
  • Canon LV-7392A | Specifications - Page 46
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.11 setting. Although projector returns "000", receiving another Freeze command does not release Freeze operation. This command is available in normal Power ON status.
  • Canon LV-7392A | Specifications - Page 47
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications ̕ɽStatus Read Command 9.1 Format 1) PC issues commands in format as below: "CR_Command" [CR] Command : Character Line 2) When projector receives the appropriate command
  • Canon LV-7392A | Specifications - Page 48
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.4 I Image Status Read Command 9.4.1 CR_BRIGHT Command Command "CR_BRIGHT"[CR] Details Get Brightness value of user control Acceptable "000_ˋ̰"[CR]
  • Canon LV-7392A | Specifications - Page 49
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.4.6 CR_SHARP Command Command "CR_SHARP"[CR] Details Get Sharpness value of user control Acceptable "000_%a"[CR] Response %a "000"~"015" Unacceptable "
  • Canon LV-7392A | Specifications - Page 50
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.4.11 CR_COLTEMP Command Command "CR_COLTEMP"[CR] Details Get Color Temp. setting value Acceptable "000_%a"[CR] "000 Xlow "001 Low "
  • Canon LV-7392A | Specifications - Page 51
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.4.15 CR_IMGGMD Command Command "CR_IMGGMD"[CR] Details Get Image Gamma setting status Acceptable "000_%a"[CR] "DYN Dynamic "STD Standard
  • Canon LV-7392A | Specifications - Page 52
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC"[CR] Details Get Fine Sync value Acceptable "000_%a"[CR] Response %a "
  • Canon LV-7392A | Specifications - Page 53
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.5.6 CR_DDOTS Command Command "CR_DDOTS"[CR] Details Get Display Dots value Acceptable "000_%a"[CR] Response %a "0256"~"nnnn" (nnnn = Total Dots -
  • Canon LV-7392A | Specifications - Page 54
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.6 Video Status Read Command 9.6.1 CR_SERSYS Command Command "CR_SERSYS"[CR] Details Get currently selected signal Returns auto-detected signal in
  • Canon LV-7392A | Specifications - Page 55
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.7 Input Status Read Command 9.7.1 CR_INPUT Command Command "CR_INPUT"[CR] Details Get selected INPUT No. Acceptable "000_%1"[CR] Response Request
  • Canon LV-7392A | Specifications - Page 56
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications "480p 480p is selected "575i 575i is selected "480i 480i is selected Projector returns selected System status regardless of the signal input. Input is Video,S-Vi
  • Canon LV-7392A | Specifications - Page 57
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional selectable ɿ ɿ Response %1  "575I 575i is selectable  "480I 480i is selectable Projector does not return Error Code "101" even if there is no signal. -When Input
  • Canon LV-7392A | Specifications - Page 58
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.8 Screen Status Read Command 9.8.1 CR_SCREEN Command (LV-7292A/LV-7297A/LV-7298A/ LV-7392A/ LV-7393A/ LV-7297M/LV to D.Zoom, projector returns the previous
  • Canon LV-7392A | Specifications - Page 59
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.8.4 CR_VPOS Command Command "CR_VPOS"[CR] Details Get setting status of Vertical Position Store Mode Acceptable "000_%1"[CR] Response %1 "-15" ~ "
  • Canon LV-7392A | Specifications - Page 60
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.8.9 is OFF Unacceptable "Error Code" [CR] 9.8.10 CR_SCCREENASPECT Command (LV-8227A/ LV-8227M) Command "CR_SCREENASPECT" [CR] Details Get setting status of
  • Canon LV-7392A | Specifications - Page 61
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.9 Lamp Status Read Command 9.9.1 CR_LAMPREPL Command Command "CR_LAMPREPL"[CR] Details Get information of Lamp Replacement time Acceptable "000_%1"[CR] "1Y Over lamp
  • Canon LV-7392A | Specifications - Page 62
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.9.5 CR_LAMPMSTS Command Command "CR_LAMPSTS"[CR] Details Get Lighting status of lamp Acceptable "000_%1"[CR] "n**** " A number of * should be among 1-4. First
  • Canon LV-7392A | Specifications - Page 63
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.10 Sound Status Read Command 9.10.1 CR_VOLUME Command Command "CR_VOLUME"[CR] Details Get Volume value of user control Acceptable "
  • Canon LV-7392A | Specifications - Page 64
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.11 Setting Status Read Command 9.11.1 CR_LANG Command Command "CR_LANG"[CR] Details Get selected language Acceptable "000_%a"[CR] "ENG
  • Canon LV-7392A | Specifications - Page 65
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.11.4 CR_AUTOSETUPKEYSTONE Command Command "CR_AUTOSETUPKEYSTONE" [CR] Details Get Keystone setting status in Auto setup Acceptable "000_%a"[CR] "AUTO Auto
  • Canon LV-7392A | Specifications - Page 66
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 11 CR_P-MANETIME Command Command "CR_P-MANETIME"[CR] Details Get time to start Power Management Acceptable "000_%a"[CR] Response %a "001"~"030 1 minute to 30 minutes
  • Canon LV-7392A | Specifications - Page 67
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.11.14 CR_PTIMEMODE Command Command "CR_PTIMEMODE"[CR] Details Get operation mode of P-timer. Acceptable "000_%a"[CR] Response %a "COUNTUP Count
  • Canon LV-7392A | Specifications - Page 68
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications status is ON-1 or ON-2 on Menu, and PJ PIN CODE is not entered so that projector is actually locked. Response %1 "FREE PJ Lock is released. PJ Lock status is OFF,
  • Canon LV-7392A | Specifications - Page 69
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.11.24 CR_FANMODE Command Command "CR_FANMODE"[CR] Details Get selected Fan mode Acceptable "000_%a"[CR] Response %a "L1 Fan mode
  • Canon LV-7392A | Specifications - Page 70
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.11.29 CR_FILTIMER Command Command "CR_FILTIMER" [CR] Details Get setting time which filter warning OSD is displayed Acceptable "000_%1"[
  • Canon LV-7392A | Specifications - Page 71
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.12 Other Status Read Command 9.12.1 CR_STATUS Command Command "CR_STATUS"(CR) Details Get status of Projector behavior. This command affects the same as "CR0" of
  • Canon LV-7392A | Specifications - Page 72
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.12.5 CR_TEMPWARN Command Command "CR_TEMPWARN"[CR] Details Get the temperature inside a projector and its condition if it is abnormal temperature or close to
  • Canon LV-7392A | Specifications - Page 73
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.12.6 CR_TEMP Command Command "CR_TEMP"[CR] Details Get current temperature inside a projector. If there are several sensors installed, it is possible to get
  • Canon LV-7392A | Specifications - Page 74
    LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 9.12.7 CR_TEMPFAIL Command Command "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector when abnormal temperature occurs. If there are several sensors
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
© 2012 CANON INC
.
YT1-1445-000
MULTIMEDIA PROJECTOR
LV-7292A/LV-7297A
LV-7298A/LV-7392A
LV-7393A/LV-8227A
LV-7292M/LV-7297M
LV-8227M
EXPAND SERIAL COMMAND
FUNCTIONAL SPECIFICATIONS
Revision 1