Canon LV-7555 LV7555_Expand_command_specification.pdf

Canon LV-7555 Manual

Get Canon LV-7555 PDF manuals and user guides
UPC - 013803032710
View all Canon LV-7555 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon LV-7555 manual content summary:

  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 1
    LV-7555 (For MR3P series) Expand Serial Command Specification Page 1/53
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 2
    CONTENT1. OVERVIEW 2. Serial Interface Specification 2.1 Communication Specification 2.2 Connection 3. Note for Communications 4. Name Definition 5. Functional Execution Command Table 5.1 Image Series Command Table 5.2 PC Control Series Command Table 5.3 Input Control Series Command Table 5.4 Screen
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 3
    Series Command 8.5.1 CF_FSYNC COMMAND 8.5.2 CF_TDOTS COMMAND 8.5.3 CF_CLAMP COMMAND 8.5.4 CF_H-POS COMMAND 8.5.5 CF_V-POS COMMAND 8.5.6 CF_DDOTS COMMAND 8.5.7 CF_DLINE COMMAND 8.5.8 CF_SETPCADJ COMMAND 8.5.9 CF_ORGMODE COMMAND 8.5.10 CF_PCSTORE COMMAND 8.6 Input Control Series Command 8.6.1 CF_INPUT
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 4
    COMMAND 8.7.9 CF_VPOS COMMAND 8.7.10 CF_HSCALE COMMAND 8.7.11 CF_HPOS COMMAND 8.8 Lamp Series Command 8.8.1 CF_LAMPH COMMAND 8.8.2 CF_LAMPMODE COMMAND 8.9 Sound Series Command 8.9.1 CF_VOLUME COMMAND 8.9.2 CF_MUTE COMMAND 8.9.3 CF_BLTINSP COMMAND 8.10 Setting Series Command 8.10.1 CF_VOLUME COMMAND
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 5
    Read Command 9.5.1 CR_FSYNC COMMAND 9.5.2 CR_TDOTS COMMAND 9.5.3 CR_CLAMP COMMAND 9.5.4 CR_H-POS COMMAND 9.5.5 CR_V-POS COMMAND 9.5.6 CR_DDOTS COMMAND 9.5.7 CR_DLINE COMMAND 9.5.8 CR_ORGMODE COMMAND 9.5.9 CR_PCSTORE COMMAND 9.5.10 CR_SETPCADJ COMMAND 9.6 Status Read Command for VIDEO 9.6.1 CR_SERSYS
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 6
    Read Command for LAMP 9.9.1 CR_LAMPREPL COMMAND 9.9.2 CR_LAMPMODE COMMAND 9.9.3 CR_PROJH COMMAND 9.10 Sound Series Status read Command 9.10.1 CR_VOLUME COMMAND 9.10.2 CR_MUTE COMMAND 9.10.3 CR_BLTINSP COMMAND 9.11 Status Read Command for Setting 9.11.1 CR_BBACK COMMAND 9.11.2 CR_DISP COMMAND 9.11
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 7
    (1.3"XGA -4 LV-7555). 1.2 A projector firmware Ver. 1.x -ready 1.3 Commands are to communicate to Network card, but most commands control a remote projector with PC installed RS232C. That's why Commands are defined as expand serial commands. 2. Serial Interface Specification 2.1 Communication
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 8
    "C" and ends carriage return (0x0D). 3.2 When a projector receives carriage return (0x0D), it starts decoding. 3.3 There are two type of expand serial. Command and functional execution Commands and Status Read Command. Functional Execution COMMAND Ex."CF_BRIGHT_032"[CR] Note) _means a space Status
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 9
    in AC. During this time, it cannot process Command. Do not issue any commands. 4. Name Definition 4.1 Data from a controller to a projector is represented as COMMAND, and data from a projector to a controller for the incoming command is represented as RESPONSE. 4.2 [CR] : Carriage Return Code
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 10
    Display Line value. Reflect the setting value on the image. Specify serial for PC mode Store current PC Adj. Status to Mode 1, 2, 3, 4, or 5. 5.3 Input Control Series Command Table Execute Command CF_INPUT_%1 [CR] CF_SOURCE_%1 [CR] CF_INPUT1_%1 [CR] CF_INPUT2_%1 [CR] CF_INPUT3_%1 [CR] CF_INPUT4_
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 11
    Lamp Series Command Table Execute Command CF_LAMPH_%1 [CR] CF_LAMPMODE_%1 [CR] Item Reset lamp total running time. Select lamp mode. 5.6 Sound Series Command Table Execute Command function. Set Ceiling function. Set Rear function Select Remote Control Reception Code Select OSD language. Set Power
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 12
    signal for PC mode Get if Mode 1 to 5 for PC Adj. is Free or Stored. Get PC signal for current PC display status 6.3 Read Status Command Table for Video Status Read Command CR_SERSYS [CR] Item Get selected current signal. When in Auto mode, it returns a result by auto detect. 6.4 Read Status
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 13
    CR_LAMPREPL [CR] CR_LAMPMODE [CR] CR_PROJH [CR] Item Get information for lamp replacement time Get lamp mode status Get total projector running time 6.7 Sound Series Status Read Command Table Status Read Command CR_VOLUME [CR] CR_MUTE [CR] CR_BLTINSP [CR] Item Get Volume value Get sound mute
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 14
    except for "000" value for anyspecific reason. See the Error Code for its contents 3. When received an undecodable data Return " " CR 8.2 Transfer Example When setting projector total Command to 1344 by expand Command. PC PJ :"CF_TDOTS_1344" [CR] PC PJ :"000"[CR Reception OK Page 14 / 53
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 15
    Setting Value %1 "UP Bright Setting Value+1 "DN Bright Setting Value-1 Details Set the User Control Bright Value. The value set by their Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For Stand-by mode, this
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 16
    setting value %1 "UP Current setting value+1 "DN Current setting value -1 Details Set the user control tint value The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For Stand-by mode, this
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 17
    setting value %1 "UP Current setting value +1 "DN Current setting value-1 Details Set the User Control Gamma Value. The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (For Stand-by mode, this
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 18
    is adjusted and saved by a user.) Details Select an Image Mode(When it is in usual Power ON state, this is valid.) Parameter " 1" is the same as selecting custom on OSD menu. The value set by this Command is stored in EEEPROM. When ALL OFF the projector, the value will return to the
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 19
    adjustment on OSD menu. The value set by this Command will be stored. Therefore, when projector POWER OFF, the value will return to the original COMMAND COMMAND "CF_COLMNLD_%1"[CR] %1 "000"-"009"---- Specify store area Details Call color management setting status from an area by %1 specification
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 20
    projector, the value will return to the original setting. (StanBy mode stays) Note:When %1 is directly specified, this command is not enough to execute for the screen. To show up on the image, issue CF_SETPCADJ COMMAND. Response Acceptable "000"[CR] Unacceptable "101"[CR] ---- When Input is Video
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 21
    CF_SETPCADJ COMMAND. Response Acceptable "000"[CR] Unacceptable "101"[CR] ---- When Input is Video Series 8.5.4 CF_H-POS COMMAND COMMAND "CF_H On state.) This value set by this Command will not be save do the projector. Therefore, when ALL OFF the projector, the value will return to the original
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 22
    CF_SETPCADJ COMMAND Response Acceptable "000"[CR] Unacceptable "101"[CR] ---- When Input is Video Series 8.5.6 CF_DDOTS COMMAND COMMAND " PC signal The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 23
    On state.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the specified %1 by EXT No.6 (not XGA No.1) will be displayed. Acceptable "000"[CR] Unacceptable "101"[CR] ---- When Input is Video Series Page 23 / 53
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 24
    COMMAND 8.6.1 CF_INPUT COMMAND COMMAND "CF_INPUT_%1"[CR] "1 Select Input-1 %1 "2 Select Input-2 "3 Select Input-3 "4 Select Input-4(Network Viewer) Details Select Input.(Only valid when it is in the usual Power On state.) The operation is the same as the projector button or the remote
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 25
    and response is error code, "101". Response Acceptable "000"[CR] Unacceptable "%%%"[CR] 8.6.4 CF_INPUT2 COMMAND COMMAND "CF_INPUT2_%1"[CR] "VIDEO"-------- Select composite video input %1 "YPBPR"-------- Select Y/Pb/Pr "ANALOG"--------- Select RGB Details Select Input-2 and specified source
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 26
    meet the requirement for specified %1, the response will be "101" and the command does not execute. Note 1) "NTSC" / "NTSC4.43" / "PAL" / "SECAM" / "PAL-M" / "PAL-N" is available only when Input is VIDEO or S-VIDEO. Note 2) "1080I" / "1035I" / "720p" / "575P" / "480P" / "575I" / "480I" is Page 26
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 27
    Set/cancel Full Screen. (Only valid when it is in the usual Power On state.) The value set by this Command will not be saved to the projector. Therefore, when ALL OFF the projector, the value will return to the original setting. (stay in Stand By mode.) (stays in Stand By mode.) Response
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 28
    000"[CR] Unacceptable "101"[CR] ---- When Input is Video Series 8.7.4 CF_DZCENT COMMAND COMMAND "CF_DZCNENT_%1"[CR] %1 "CENT"----- Cancel Digital Zoom(CENT state.) When the range is over the maximum, a projector accepts the Command, but it does not execute. Response Acceptable "000"[CR] Unacceptable "Error
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 29
    mode(Only valid when it is in the usual Power On state) Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.7.7 CF_ ANAMORPHIC COMMAND COMMAND "CF_ANAMORPHIC_%1"[CR] %1 "ON"---- Set Anamorphic to ON "OFF"-- Set Anamorphic to OFF Details Set Anamorphic ON/OFF(Only valid when it is
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 30
    it is in the usual Power On state.) Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.8 Lamp Series COMMAND 8.8.1 CF_LAMPH COMMAND COMMAND "CF_LAMPH_%1"[CR] %1 "RST" Details Reset total lamp running time. (Only valid when it is in the usual Power On state.) Response Acceptable
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 31
    volume value. When setting volume value like remote control unit" operation, Sound Mute ON will be canceled. The setting value will be stored in a projector. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.9.2 CF_MUTE COMMAND COMMAND "CF_MUTE_%1"[CR] %1 "ON"------ set Sound Mute
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 32
    state.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.3 CF_LOGO COMMAND COMMAND "CF_ OGO_%1"[CR] %1 "ON"------ Select Logo "OFF"---- Cancel Logo Details Set/Cancel
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 33
    Error Code"[CR] 8.10.6 CF_RCODE COMMAND COMMAND "CF_RCODE_%1"[CR] %1 "001"------Select Code1 "002"------Select Code2 Details Select a remote control code.(Only valid when it is in the usual Power On state.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 34
    On state.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.8 CF_ON-STA COMMAND COMMAND "CF_ON-STA_%1"[CR] %1 "ON"------ Select Power On Start "OFF"---- Cancel Power On
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 35
    state.) The value set is stored in EEPROM. When ALL OFF the projector, the value will return to the original setting. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.12 CF_KEYDIS COMMAND COMMAND "CF_KEYDIS_%1"[CR] "N/A" --- RC and KEY are available %1 "RC" ...Bar the use of
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 36
    Get total dots of projector by expand Commands PC PJ :"CR TDOTS"[CR] PC PJ :"000 1344"[CR] 9.3 Status Read Command Should be always operated 9.4 Image Series Status Read COMMAND 9.4.1 CR_BRIGHT COMMAND COMMAND "CR_BRIGHT"[CR] Details Get Bright value of user control Acceptable "000_%1"[CR
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 37
    "[CR] --- invalid " "[CR When receives unclear Command 9.4.5 CR_SHARP COMMAND COMMAND "CR_SHARP"[CR] Details Get Sharpness value of user control Acceptable "000_%1"[CR] Response %1 "000"-"031" Unacceptable " "[CR] 9.4.6 CR_GAMMA COMMAND COMMAND "CR_GAMMA"[CR] Details Get Gamma value of
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 38
    Response %1 "000"-"063" Unacceptable " "[CR] 9.4.9 CR_WBAL-B COMMAND COMMAND "CR_WBAL-B"[CR] Details Get White Balance Blue of user control Acceptable "000_%1"[CR] Response %1 "000"-"063" Unacceptable " "[CR] 9.4.10 CR_COLTEMP COMMAND COMMAND "CR_COLTEMP"[CR] Details Get Color Temp
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 39
    High contrast "CINEMA"---- Cinema "CUSTOM1"-- Custom Unacceptable "Error Code"[CR] ---- Invalid " "[CR When receives unclear Command 9.4.14 CR_IMGGMD COMMAND COMMAND "CR_IMGGMD"[CR] Details Get Standard/High Contrast/Cinema for image gamma setting. Acceptable "000_%1"[CR] Response "STD
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 40
    "000_%1"[CR] Response %1 "ON"---- Bright SW is ON "OFF"-- Bright SW is OFF Unacceptable " "[CR] 9.5 STATUS READ COMMAND FOR PC 9.5.1 CR_FSYNC COMMAND COMMAND "CR_FSYNC"[CR] Details Get Fine Sync value Acceptable "000_%1"[CR] Response %1 "0000"-"0031" Unacceptable "Error Code"[CR
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 41
    "0000"-"nnnn" (nnnn = Total Line - Display Line) Unacceptable "Error Code"[CR] --- invalid " "[CR When receives unclear Command 9.5.6 CR_DDOTS COMMAND COMMAND "CR_DDTOS"[CR] Details Get Display Dots value. Acceptable "000_%1"[CR] Response %1 "0100"-"nnnn" (nnnn = Total Dots - Horizontal
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 42
    -MODE5 or EXT6-EXT60 are not selected, get current signal. Acceptable "000_%1"[CR] Response %1 "XGA1" "HDTV1080"...Etc Unacceptable " "[CR] 9.5.9 CR_PCSTORE COMMAND COMMAND "CR_PCSTORE"[CR] Details Get the status if MODE1-MODE5 is Free or Stored for PC Adjust. Each data MODE1-MODE5 will be
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 43
    RGB is selected. "SCART"------ Scart is selected. %1 "HDCP"-------- HDCP is selected. "VIDEO"------ Video input is selected. "S-VIDEO"-- S-Video is selected. "YPBPR"------ Y/Pb/Pr input is selected. Unacceptable "Error Code"[CR] -- Invalid " "[CR When receives unclear Command Page 43 / 53
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 44
    CR] Details Get INPUT 3 source. Acceptable "000_%1"[CR] Response "VIDEO"------ Video mode status %1 "S-VIDEO"-- S-Video mode status "YPBPR"------ Y/Pb/Pr mode status Unacceptable " "[CR] 9.7.6 CR_SRCINP4 COMMAND COMMAND "CR_SRCINP4"[CR] Details Get INPUT 4 Source Acceptable "000_%1"[CR
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 45
    .43 is selected. %1 "PAL" --------- PAL is selected. When Input is video series "SECAM" ----- SECAM is selected. "PAL-M" ----- PAL-M is selected. Series " "[CR when receives unclear COMMAND 9.8 STATUS READ COMMAND FOR SCREEN 9.8.1 CR_FLSCREN COMMAND COMMAND "CR_FLSCREN"[CR] Details Get the
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 46
    Acceptable "000_%1"[CR] Response %1 "STR"-- "Store Mode" is Store "RST"-- "Store Mode" is Reset Unacceptable " "[CR COMMAND 9.8.4 CR_ANAMORPHIC COMMAND COMMAND "CR_ANAMORPHIC"[CR] Details Get Anamorphic setting status Acceptable "000_%1"[CR] Response %1 "ON"---- Anamorphic is ON "OFF
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 47
    " "[CR] 9.9 STATUS READ COMMAND FOR LAMP 9.9.1 CR_LAMPREPL COMMAND COMMAND "CR_LAMPREPL"[CR] Details Get lamp replacement time information Acceptable "000_%1"[CR] Response %1 "1Y"-- over the lamp replacement time "1N"-- haven not reached the lamp replacement time Unacceptable " "[CR
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 48
    9.10 Sound Series Status Read COMMAND 9.10.1 CR_VOLUME COMMAND COMMAND "CR_VOLUME"[CR] Details Get user control Volume Acceptable "000_%1"[CR] Response %1 "000"-"063" Unacceptable " "[CR] 9.10.2 CR_MUTE COMMAND COMMAND "CR_MUTE"[CR] Details Get sound mute setting value Acceptable "000_
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 49
    status Acceptable "000_%1"[CR] Response %1 "ON"----- Set Logo "OFF"--- Cancel Logo Unacceptable " "[CR] 9.11.4 CR_RCODE COMMAND COMMAND "CR_RCODE"[CR] Details Get the selected code in Remote Control mode Acceptable "000_%1"[CR] Response %1 "001" Code1 is selected "002" Code2 is selected
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 50
    "READY"-------- Power management is Ready "SHUTDOWN"-- Power management is set to Shut Down mode Unacceptable " "[CR] 9.11.8 CR_P-MANETIME COMMAND COMMAND "CR_P-MANETIME"[CR] Details Get the time to start Power management Acceptable "000_%1"[CR] Response %1 "001"-"030"-- 1mininute to 30
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 51
    Both RC & KEY are available. %1 "RC" RC is locked "KEY" KEY is locked Unacceptable " "[CR] 9.12 Other Status Read COMMAND 9.12.1 CR_SIGNAL COMMAND COMMAND "CR_SOGNAL"[CR] Details Get information if there is signal or not Acceptable "000_%1"[CR] Response "ON" There is signal %1 "OFF" No
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 52
    "FFFFFFFF" All are normal Unacceptable " "[CR] 9.12.6 CR_TEMPWARN COMMAND COMMAND "CR_TEMPWARN"[CR] Details Get if the sensors are exceeding or approaching critical temperature. When some sensors are installed inside the projector, get each sensor's temperature. Response Acceptable "000_%1_
  • Canon LV-7555 | LV7555_Expand_command_specification.pdf - Page 53
    9.12.7 CR_TEMPFAIL COMMAND COMMAND "CR_TEMPFAIL"[CR] Details Get the temperature inside a projector. When some temperature sensors are installed in the projector, it is possible to know the temperature all at once. Acceptable "000_%1_%2_%3"[CR] %1Temperature, sensor 1 %2Temperature, sensor 2 %
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
MR3P Series EXPAND SERIAL COMMAND FUNCTION SPECIFICATION
Software Engineer Division
LV-7555 (For MR3P series)
Expand Serial Command Specification
Page
1/53