Canon LV-7590 Multimedia Projector LV-7590 User's Manual
Canon LV-7590 Manual
 |
View all Canon LV-7590 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LV-7590 manual content summary:
- Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual ] Projection lens not included. - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 2
and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Functionally Rich ◆ Multilanguage Menu Display This projector has many useful functions such as lens shifting, ceiling and rear projection - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 3
Instructions 63 Replacing the Filter Cartridge 64 Resetting the Filter Counter 65 Resetting the Scroll Counter 65 Lamp Replacement 66 Resetting the Lamp Counter 67 Cleaning the Projection Lens 69 Cleaning the Projector Cabinet 69 Warning Indicators 70 Appendix 71 Troubleshooting - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 4
Troubleshooting" section in the back of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service RAIN OR MOISTURE. - This projector produces intense light from the projection lens. Do not stare directly into the lens, otherwise eye damage could - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 5
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 6
service. - Do not attempt to disassemble the projector (including expendable parts) or remote control unit. - Do not look into the lens while the projector is used. Strong light may hurt your eyes. Be especially careful that small children do not look into the lens. WARNING Follow the instructions - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 7
projector is being used. - Do not place the projector on top of unstable or slanted surfaces. The projector may fall down and cause injury. - Do not attach the lens cover while the projector projector at a proper angle. Incorrect positioning may cause troubles and accidents. Do not roll the projector - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 8
Safety Instructions Air Circulation Openings in the cabinet are provided for touch peripheral parts of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used. -Do not put anything on the cabinet. Objects put on the cabinet will not only - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 9
Safety Instructions Installing the Projector in Proper Directions Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident or fire hazard. This projector can project the picture in upward, downward, or inclined position in - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 10
cause damage to the projector. For information about transporting the projector by courier or any other transport service, consult your dealer. - Do not put the projector in a case before it is cooled enough. - Remove the lens, close the lens mounting hole with the lens mounting cover, and retract - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 11
Compliance Federal Communications Commission Notice Multimedia Projector, Model: LV-7590 This device complies with Part specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 12
Part Names and Functions Front q w e q Indicators w Top Cover e Top Cover Release Button r Infrared Remote Receiver (Front) t Projection Lens (not supplied) y Light-Block Sheet u Adjustable Feet i Air Intake Vent o Filter Cover !0 Lamp Cover rt y Back u i o !0 !6 !1 !2 Bottom !7 !3 !4 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 13
video equipment to this terminal (p.25). y USB TERMINAL (Series B) Use this connector when controlling a computer with the remote control unit of the projector. Connect the USB terminal of your computer to this connector with the supplied USB cable (p.24). u CONTROL TERMINAL When controlling the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 14
receiver is also located in the front (pp.12, 18). B Kensington Security Slot This slot is for a Kensington lock used to deter theft of the projector. *Kensington is a registered trademark of ACCO Brands Corporation. 14 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 15
(on the top panel) i u y o !0 !1 !2 q POWER button Turn the projector on or off (pp.28-29). w INPUT button Select an input source (pp.37-39 out the image in the Digital zoom mode (p.46). u LENS button Enter the focus, zoom, and lens shift adjustment mode (p.32). i POWER indicator - Light when in - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 16
Adjust the volume level (with Point 7 8 buttons) or mute the sound (with Point d button.) (p.33). !0 MOUSE POINTER button Move a pointer of the projector or a pointer for wireless mouse operation (p.36). !1 OK button - Execute the selected item (p.30). - Zoom in or out the image in the Digital zoom - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 17
not in use. Slide this switch to "RESET" to initialize the remote control unit code. @1 FILTER button Scroll the filter (p.35). @2 LENS-SHIFT button Select the Lens Shift function (p.34). @3 FREEZE button Freeze the picture on the screen (p.35). @4 P-TIMER button Operate the P-timer function (p.35 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 18
by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rules or guidelines. 16.4' Remote Control Receivers range (16.4'/ 5 m). Connect the remote control unit and the projector with the remote control cable (sold separately). Connected with the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 19
or video equipment next to each other are operated at the same time. Change the remote control unit code for the projector first before changing that for the remote control unit. See "Remote control" in the Setting Menu on page 57. 1 Press and hold the MENU and a - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 20
adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and adjust the projector to the proper height; to raise the projector, rotate the both feet clockwise. To lower the projector or to retract the adjustable feet, rotate the both feet counterclockwise. To correct keystone - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 21
lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. 1 Shift the lens to the center position by using Lens shift function (p. 32).(Follow this procedure for replacing the lens.) 2 Turn off the projector - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 22
to the projector. Lens Lock Lever Light-block sheet Groove Light-Block Sheet for each Lens Light-Block Sheet Type No. (Part No.) Type PG1(610 339 2967) Type PH1(610 339 2974) No need to attach Lens Part No. LV-IL05 LV-IL03, LV-IL02, LV-IL04 LV-IL01 NOTES ON LENS INSTALLATION AND REPLACEMENT - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 23
the Lens Adjustment and improves the diagonal focus. The corrected distance is determined by the thickness of the used spacers. As a guide, projection B Lens Attachment Spacer A B C D Lens A B C D Screw driver supplied with the lens Focus adjustment LV-IL01 Set up the projector and project - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 24
cable Serial Cross cable USB G B R H/V V INPUT 1 (DIGITAL) INPUT 1 (ANALOG) MONITOR OUT CONTROL PORT 24 ✔Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. v See the next page for the signals that can output to the MONITOR - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 25
(RCA x 1 or RCA x 3) ✽ • BNC Cable ✽ • S-VIDEO Cable ✽ • Scart-VGA Cable✽ • DVI-Digital Cable ✽ ✔Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. Monitor Out Signal Table Input Terminal Input 1 RGB (PC analog) D-sub15 RGB - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 26
cable (stereo) AUDIO IN I/II External Audio Equipment Audio Input Audio cable (stereo) AUDIO OUT (stereo) ✔Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. 26 ✔Note: • See the Sound menu to set the Input pattern for AUDIO IN - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 27
dealer or service station. Connect the projector with all peripheral equipment before turning on the projector. Installation CAUTION dealer. Projector side For the U.S.A. and Canada Ground AC Outlet side For Continental Europe For the U.K. To POWER CORD CONNECTOR on your projector. To the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 28
projector is locked with a PIN code, PIN code Input Dialog Box will appear. Enter the PIN code as instructed projector. operate the projector. If you projector. Setting a PIN code prevents unauthorized use of the projector projector projector appeared, the projector will be code, the projector can no - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 29
AC power cord to an AC outlet (p.58). • The running speed of cooling fans is changed according to the temperature inside the projector. • Do not put the projector in a case before the projector is cooled enough. • If the WARNING TEMP. indicator blinks red, see "Warning Indicators" on page 70. • The - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 30
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. For each adjustment and setting procedure, refer to the respective sections in this manual. 1 Press the MENU button on the side control or the remote control unit to display the On-Screen - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 31
the sound, or switch the Input pattern (p. 33). o Setting Menu Used to set the projector's operating configurations (pp. 54-62). !0 Information Menu Display the input source information (p. 34). r t yu i o q Guide Window Show the selected Menu of the On-Screen Menu. w Input Menu Used to select - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 32
Basic Operation Operating with Projector Control Lens Operation The following lens operation can be made with the Lens button on the side control. Press the LENS button to enter each lens operation mode. The selected adjustment display appears on the screen. Side Control LENS button POINT buttons - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 33
On/Off. When the sound is turned off, "On" is displayed. Press the Point 7 8 buttons again to turn the sound back on. Input pattern This projector has two INPUT terminals [AUDIO IN I/ AUDIO IN II]. Input pattern allows you to set up INPUT 1, INPUT 2, and INPUT 3 to each INPUT for sound - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 34
FOCUS buttons Press the FOCUS buttons on the remote control unit to adjust focus of the image. LENS-SHIFT button See page 32 for details. Remote Control Unit AUTO PC button ASPECT button D-ZOOM be different from the actual values. • SERIAL NO. is used to service the projector. Information Menu - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 35
Basic Operation FILTER button Press and hold the FILTER button for more than 5 seconds to operate electrically operated filter to replace the filter. ✔Note: • When the filter is replaced, the total accumulated time of the filter use is automatically set to 0. Remote Control Unit FREEZE button - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 36
When the Pointer function is used, the wireless mouse is not available. 2 When a USB cable is connected to the computer and the projector, turn on the projector first, then the computer. If you turn on the computer first, the wireless mouse function may not operate properly. 36 MOUSE POINTER button - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 37
Input Selection Input Side Control Remote Control Unit INPUT button INPUT button Side Control/Remote control unit button operation INPUT button Input 1 Input 2 Input 3 Side Control/Remote Control Unit Operation Press the INPUT button on the side control or the remote control unit. It switches to - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 38
Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP. Input Menu icon Move the pointer (red arrow) to Input 1 and press the OK - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 39
Input Selection Video Input Source Selection Menu Operation WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) When connecting to video equipment, select the type of INPUT MENU Video source in the Source Select Menu. RGB (Scart) When scart video equipment is connected to the INPUT 1 (ANALOG) - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 40
. (pp. 42-43.) ----- There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 71.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in the Mode 1-10. (pp. 42-43 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 41
parameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting Mode in PC SYSTEM Menu (p.40). See MANUAL PC ADJUSTMENT on pages 42-43. ✔Note: • Fine sync, Total dots, Horizontal and Vertical - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 42
Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. ✔Note: The PC Adjust Menu cannot be operated - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 43
Computer Input Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box appears and then select [Yes]. All adjustments will return to their previous figures. Mode free To clear the adjusted data, select Mode free and then press the OK button. Move the red arrow - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 44
desired image level and then press the OK button. IMAGE SELECT MENU Image Select Menu icon Standard Normal picture level preset on the projector. High contrast Picture level with improved halftone for graphics. Custom 1-10 User preset picture adjustment in the Image Adjust Menu. (p. 53) Move the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 45
original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to the PC System Menu. (p.40) Custom Adjust the screen scale and position manually with this function. Press the OK button at Custom and the "Custom" - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 46
function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 47
system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select the system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 48
to the desired image level and then press the OK button. IMAGE SELECT MENU Image Select Menu icon Standard Normal picture level preset on the projector. Cinema Picture level adjusted with fine tone. Custom 1-10 User preset picture adjustment in the Image Adjust Menu. (p. 53) Move the red frame - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 49
at the normal video aspect ratio of 4:3. Wide Provide the image at the wide screen ratio of 16:9. Custom Adjust the screen scale and position manually with this function. Press the OK button at Custom and the "Custom" is displayed on the screen for a few seconds. To display the Aspect dialog - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 50
function is set to "On," the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector. Rear When this function is set to "On," the picture is left/right reversed. This function is used to project the image from the rear - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 51
Picture Image Image Adjustment 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Image Adjust Menu icon. 2 Use the Point ed buttons to move the red frame pointer to the desired item and then press the OK button to display the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 52
controls the operation of the Color Control Device, which independently and automatically regulates the amount of yellow light passing through the LCD panel, to accurately reproduce both image color and image brightness. Normally leave Auto (default setting). ✔Note: • White balance may change - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 53
scan mode. Off Progressive scan mode is "Off." On Progressive scan mode is "On." Film For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the adjusted data, select Reset and press the OK button. A confirmation box - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 54
becomes bright enough. The factory default setting is in this option. Countdown Off Shows the input image instead of the countdown when turning on the projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hides the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 55
, go to the Logo select function and set it to "User". Then the captured image will be displayed the next time you turn on the projector. To cancel the Capture function, select [No]. ✔Note: • Before capturing an image, select "Standard" in the Image Select Menu to capture a proper image (pp. 44 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 56
code and Key lock will be reset, as well. 1.Unplug the AC Power Cord from the AC outlet. 2. Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights. The Logo PIN code - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 57
control set to Max. Lower brightness reduces the lamp power consumption and extends the lamp life. It is recommended to use Eco 2 when using the projector continuously over a long period of time. The fan noise becomes louder in Eco 2 than in Eco 1. Select the suitable mode for the used environment - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 58
. Power management For reducing power consumption as well as maintaining the lamp life, the Power management function turns off the projection lamp when the projector is not used for a certain period. If the input signal is interrupted and no button is pressed for more than 30 seconds, the timer - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 59
side control. If the side control accidentally becomes locked and you do not have the remote control unit nearby and unable to operate the projector, contact the service station. Security Set the red frame pointer to the item and press the OK button. Key lock PIN code lock This function prevents - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 60
the NEW PIN CODE as a reminder. If you forget your pin code, the projector can no longer be started. NOTE: If you forget your PIN code and unable AC Power Cord from the AC outlet. 2. Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 61
the shutter operation from both of the remote control and the side control. Management The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 62
and the Scrolls remaining option. Used Time Show the total accumulated time of the filter use, timer setting option and the Reset options. When the projector reaches a time set in the timer setting, the Filter replacement icon (Fig. 1) appears on the screen and the total accumulated time turns red - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 63
Instructions Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of the projector. This projector - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 64
smoky conditions, dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the projected image. When the symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Filter cover - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 65
Maintenance and Care Resetting the Filter Counter Be sure to reset the Filter counter after replacing the filter cartridge. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 66
properly and fully inserted. 5 Close the lamp cover and secure the screw. 6 Close the filter cover. 7 Connect the AC power cord to the projector and turn on the projector. 8 Reset the Lamp counter (p.67). ✔Note: • Be sure to insert the lamp in the correct direction. • Do not reset the Lamp counter - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 67
counter. ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering, give the following information to the dealer. ● Model No. of your projector : LV-7590 ● Replacement Lamp Type No - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 68
IMMEDIATELY after the projector has cooled down. (Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the projector except those who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 69
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface of the lens. Cleaning the Projector Cabinet Unplug the AC power cord before cleaning. Gently wipe the projector body with a soft dry cleaning cloth. When the cabinet is heavily soiled, use a small amount - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 70
cannot be turned on and these indicators are still lighting and blinking, unplug the AC power cord and contact the service station. WARNING DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. Top Panel LAMP/SHUTTER - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 71
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. 1. Make sure you have properly connected the projector monitor output when connected to the projector. See your computer's instruction manual for the setting. - It takes about 30 seconds - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 72
pages 64 -65) appears on the screen The image is out of focus. - Adjust the focus of the projector. - Check Projection Lens to see if it needs cleaning. ✔Note: Moving the projector from a cool temperature location to a warm temperature location may result in moisture condensation on Projection - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 73
center. WARNING: High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 74
freq. V-sync freq. Aspect Language Lamp status Power management Shutter management Security Remote control SERIAL NO. Image Adjust Image Adjust Remote Control Projector 5 - 180 Min Key lock PIN code lock Simple mode RC code Volume Mute Input pattern Quit 0-63 On/Off Contrast Brightness Color - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 75
Computer Input System (1) Mode 1 Mode 2 SVGA 1 SVGA 2 SVGA 3 ✽ System displayed in the System Menu varies depending on the input signal. PC Adjust Auto PC adj. Fine sync. Total dots Position H Position V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0-31 Yes/ - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 76
counter Test pattern Factory default Quit On/Off Cross/Arrow/Dot Key lock PIN code lock Off Projector Remote control Off/On1/On2 PIN code change Quit Protection Remote control On/Off Projector On/Off Management Quit Hour(s) Reset Quit 5 - 180 Min. Yes/No Used time Off/400H/700H/1000H - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 77
until cooling is completed and the POWER indicator lights green. ❖ ✽ ✽ The projection lamp is being cooled down in the Power management mode. ❖ ✽ ✽ The projector is in the Power management mode. ❊ ✽ ✽ The projection lamp is being cooled down in the Shutter management mode. ❊ ✽ ✽ The - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 78
cannot be turned on until cooling is completed.) The lamp cannot light up. (The lamp has been cooled down ❖ ✽ enough and the projector is in stand-by mode and ready to be turned on with the POWER button.) ✽ ✽ ✽ ✽ The lamp has been used overtime. Replace the lamp immediately - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 79
on. Unplug the AC power cord and plug it again to turn on the projector. If the projector is turned off again, unplug the AC power cord and contact the dealer or the service center. Do not leave the projector on. It may cause an electric shock or a fire hazard. ✽ ✽ ✽ ✽ The shutter is out - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 80
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than 180 MHz of Dot Clock. ON-SCREEN DISPLAY VGA 1 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 81
Appendix When an input signal is digital from the DVI terminal, refer to the chart below. ON-SCREEN DISPLAY D-VGA D-480p D-575p D-SVGA D-XGA D-WXGA 1 D-WXGA 2 D-WXGA 3 D-WXGA 4 D-WXGA 5 D-WXGA 6 D-WXGA 7 D-WXGA 9 D-WXGA 10 RESOLUTION 640x480 720x480 720x575 800x600 1024x768 1366x768 1360x768 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 82
Control Unit Battery Operating Range Dimensions Net Weight Accessories User's Manual (CD-ROM) Quick Start Guide AC Power Cord Remote Control Unit and Batteries VGA Cable (1AV4W20B29700) USB Cable (1AV4W20B20201) PIN Code Label 82 Multi-media Projector 14.56" x 7.36" x 17.32" (370.0 mm x 187.0 mm - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 83
It may cause serious damage to the projector. To the sales and service engineers: For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and installing the lens, make sure that you are using the lens with the correct Type No. PJ Link - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 84
Appendix Configurations of Terminals INPUT 1 (ANALOG)/ MONITOR OUT (Mini D-sub 15 pin) 54 32 1 10 9 8 7 6 15 14 13 12 11 Input 1 Red Input 2 Green Input 3 Blue Input 4 No Connect 5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) Output 1 Red Output 2 Green Output 3 Blue - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 85
While the projector is locked with the PIN code... Put the label below (supplied) on in a prominent place of the projector's body while it is locked with a PIN code. Appendix 85 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 86
2.05 (52) Appendix Dimensions Unit: inch (mm) 6.5º MAX 3.94 (100) 14.57 (370) 7.36 (187) 4.33 (110) 4.33 (110) 17.32 (439.9) 5.75 (146) 5.20 (132) 4.13 (105) Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 13.58 (345) 86 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 87
bps. If an error occurs in the communication, change the serial port and the communication speed (baud rate). 3 Type the command for controlling the projector and then enter the "Enter" key. Example When you want to change the input to INPUT 2, Type 'C' '0' '6' 'Enter'. ✔Note: • Enter with ASCII 64 - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 88
C25 C28 C29 C33 C34 C35 Function Turn the projector ON Turn the projector OFF (immediately OFF) Turn the projector OFF Select Input 1 Select Input 2 Select Input Select Input 1 DVI (AV HDCP) Lens shift UP Lens shift DOWN Lens shift LEFT Lens shift RIGHT Auto PC Adj. Keystone UP Keystone DOWN Keystone - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 89
down Power Malfunction Cooling down at the temperature abnormally Cooling down at Power Management mode Power Management mode after Cooling down Cooling down after the projector is turned off when the lamps are out. Stand-by mode after Cooling down when the lamps are out. Stand-by mode after Cooling - Canon LV-7590 | Multimedia Projector LV-7590 User's Manual - Page 90
INC. 30-2, Shimomaruko 3-chome, Ohta-ku,Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Côte-de-Liesse, Montréal Québec H4T 1V7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
 |
 |
MULTIMEDIA PROJECTOR
User’s Manual
]
Projection lens not included.