Canon LV-8320 Multimedia Projector LV-8320 User's Manual
Canon LV-8320 Manual
 |
View all Canon LV-8320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LV-8320 manual content summary:
- Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 1
MULTIMEDIA PROJECTOR User's Manual - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 2
with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ♦ Compact Design This projector is designed compact in size and weight - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 3
Cap 64 Cleaning the Projection Lens 64 Cleaning the Projector Cabinet 64 Lamp Replacement 65 Appendix 67 Troubleshooting 67 Menu Tree 70 Indicators and Projector Condition 72 Compatible Computer Specifications 73 Technical Specifications 75 Optional Parts 76 PJ Link Notice 77 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 4
seems to operate improperly, read this manual again, check operations and cable connections and try the solutions in the "Troubleshooting" section on pages 67-69 of this manual. If the problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 5
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating instructions - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 6
or breaks. - Always unplug the power cord before replacing the lamp. - When the lamp breaks, shards of glass may scatter in the lamp housing. Contact your dealer for cleaning or inspecting the projector, or replacing the lamp. WARNING Follow the instructions below when handling the batteries - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 7
or power sources. - Do not place the projector on a carpet or bed. The internal temperature will rise, causing malfunction. - To avoid increase in the internal temperature, do not block the intake/exhaust vents. - Position the projector at a proper angle. Incorrect positioning may cause troubles and - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 8
Projector in Proper Position Install the projector properly. Improper installation may reduce the lamp life and cause a fire hazard. 20° Do not roll the projector projector by courier or any other transport service with this case, otherwise the projector can be damaged. When handling the projector, - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 9
Multimedia Projector, Model: LV-8320 This equipment has been tested and found to and on, the user is encouraged to try instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon fit into the power outlet. Do not - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 10
not turn on a projector with lens cap Lamp Cover ⑨ Air Intake Vents ⑩ Terminals and Connectors ⑪ Top Controls and Indicators ⑫ LAN Connection Terminal ⑬ Power Cord Connector ⑭ Filter Covers ⑮ Adjustable Feet Note: ⑫ LAN Connection Terminal is for the Network function. Refer to the user's manual - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 11
and Functions Rear Terminal ⑤ ④ ③ ② ① ⑪⑩ ⑨ ⑧ ⑦ ⑥ ① LAN Connection Terminal Connect the LAN cable (refer to the user's manual of "Network Set-up and Operation"). ② HDMI Terminal Connect the HDMI signal (including sound signal) from video equipment or from computer to this terminal (pp.16 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 12
(p.37). - Adjust the volume level (Point ◄► buttons) (p.26). ③ INPUT button Select an input source (pp.29, 38-39). ④ POWER button Turn the projector on or off (pp.20-22). ⑤ POWER indicator - Lights red when the projector is in stand-by mode. - Lights green during operations. - Blinks green in the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 13
POWER button Turn the projector on or off. (pp.20-22) ② AUTO SET button Execute the setting of Auto setup (includes Auto input, Auto PC and Auto Keystone functions) in the setting menu. (pp.25, 47) ③ COMPUTER 1/2 buttons Select the COMPUTER 1 or COMPUTER , 54) ⑰ LAMP button Select a lamp mode. (pp.27 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 14
replaced by an incorrect type. ● Dispose of used batteries according to the instructions or your local disposal rule or guidelines. Remote controller Operating Range Point the remote controller toward the projector (Infrared Remote Receiver) when pressing the buttons. Maximum operating range for - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 15
feet lock latches on both side of the projector. Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to a proper height and tilt. Keystone distortion can be adjusted automatically with the Auto setup function or manually by using the remote control or the menu - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 16
Installation Connecting to a Computer Cables used for connection • VGA Cables (Mini D-sub 15 pin) * • Audio Cables • HDMI-DVI cable (*One cable is supplied; other cables are not supplied with the projector.) Note: Unplug the power cords of both the projector and external equipment from the AC - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 17
x 3) • S-VIDEO Cable • Audio Cable • HDMI Cable (Cables are not supplied with the projector. ) Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. External Audio Equipment Installation Audio Input Video and Audio Output (Video - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 18
this projector.) Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. COMPUTER AUDIO IN 1 COMPUTER IN 2 / MONITOR OUTPUT COMPUTER IN 1/ COMPONENT IN AUDIO OUT (stereo) Note: • When the AUDIO OUT is plugged-in, the projector - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 19
electrical shock, do not plug into any other type of power system. If you are not sure of the type of power being supplied, consult your authorized dealer or service center. Connect the projector with all peripheral equipment before turning the projector on. CAUTION The AC outlet must be near this - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 20
Basic Operation Turning On the Projector 1 Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. 2 Connect the projector's AC power cord into an AC outlet. The POWER indicator lights red. Open the lens cap. 3 Press the POWER button on the top control or on - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 21
"Set". Press the OK button so that you can start to operate the projector. If you entered an incorrect PIN code, PIN code and the number will is entered within three minutes after the PIN code dialog box appeared, the projector will be turned off automatically. •The "1234" is set as the initial - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 22
. CONTINUOUS USE MAY RESULT IN SHORTENING THE LAMP LIFE. TURN OFF THE PROJECTOR AND LET IT STAND FOR ABOUT AN HOUR IN EVERY 24 HOURS. Note: • When the Direct power on function is set to On, the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.53). • The - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 23
Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu into other submenus. For each adjustment and setting procedure, refer to respective sections in this manual. Top Control POINT buttons 1 Press the MENU button on the top control or the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 24
format. (pp.31-33) ③ Image select For both of computer , Full, 16:9, Zoom, Natural wide, Custom, Custom adj., Keystone, projector's operating configurations. (pp.46-60) ⑧ Information Display the input source information. (p.61) ⑨ Network See user's manual of "Network Set-up and Operation". ⑩ Guide - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 25
pp.37, 45). • Fine sync, Total dots, Horizontal position and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.32-33). Top Control AUTO SET button POINT - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 26
not available. • Only when the Standby mode is set to Network, STANDBY MIC OUT can be selected. • If the MIC function is turned on when connecting PC audio to the COMPUTER AUDIO IN 2 (MIC IN), loud sound may be output suddenly depending on the setting value of MIC GAIN. 26 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 27
status, Lamp counter, Power management mode, Key lock, PIN code lock, Remote control and SERIAL NO. and Total power savings. (p.61) D.ZOOM buttons Press the D.ZOOM buttons on the remote controller to enter to the Digital zoom +/- mode. See page 37 for details. Remote controller COMPUTER 1/2 buttons - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 28
the image. To restore to normal, press the BLANK button again or press any button. When the projected image is captured and is set as User in the Logo selection (p. 48), the screen changes each time you press the BLANK button as follows. b→la.c..k..o. ut→ the captured image → normal Note: When - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 29
the Point ► button to access the submenu items. Use the Point ▲▼ buttons to select the ANALOG PC input source and then press the OK button. COMPUTER 1 Note: When the Auto input function is set to On 1 or On 2 in the Auto setup function, the input signal will be searched automatically (p.47 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 30
adjustment is required (pp. 32-33). There is no signal input from the computer. Check the connection between your computer and the projector. (See "Troubleshooting" on pp. 67-69) Mode 1 The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-10 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 31
The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 32
enables you to precisely adjust several parameters to match those signal formats. The projector has 10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button to display the On-Screen Menu. Use - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 33
10 in which you want to store, and then press the OK button. Mode free Computer Input This Mode has stored parameters. Values of Total dots, Horizontal position, Vertical position, in the PC System Menu (p.30). • When input computer signal to the projector, PC adjust will become available. 33 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 34
Computer Input Image Mode Selection Direct Operation Select the desired image mode among Presentation, Standard, High contrast, Cinema, Blackboard (Green), Colorboard, User 1, User 2, User 3 and User Standard Normal picture mode preset on the projector. High contrast Picture mode with improved - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 35
Computer Input Image Adjustment 1 Press the MENU button to display the On-Screen Menu. and press the Point ► or the OK button. Use the Point ▲▼ buttons to select one from User 1 to User 4 and press the OK button. A confirmation box appears and then select Yes. Stored data can be called up by - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 36
image at the 16:9 wide screen ratio. Zoom Scale screen scale and position manually with this function. Press projector cannot display any resolution higher than 1920 x 1200. If your computer's screen resolution is higher than it, reset the resolution to the lower before connecting to the projector - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 37
Computer power cord is unplugged. Ceiling When this function is set to On, the picture will be top/ bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector 16:10) ....16:10 is the aspect of the LCD panel. The original Screen Menu is available 16:9 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 38
select VIDEO or S-VIDEO, and then press the OK button. VIDEO VIDEO When video input signal is connected to the VIDEO jack, select VIDEO. S-VIDEO When video input signal is connected to the S-VIDEO jack, select S-VIDEO. VIDEO button VIDEO S-VIDEO button S-VIDEO Note: When the Auto input - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 39
▲▼ buttons to select COMPONENT or SCART and then press the OK button. COMPONENT When the input source is coming from video equipment connected to the COMPUTER IN 1/ COMPONENT IN terminal with a COMPONENT-VGA Cable, select COMPONENT. SCART When the input source is coming from video equipment - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 40
or S-VIDEO) 2 Use the Point ▲▼ buttons to select VIDEO, S-VIDEO or COMPUTER 1(COMPONENT) and then press the OK button. 3 Use the Point ▲▼ buttons system manually. PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N If the projector cannot reproduce proper video image, select a specific broadcast signal format - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 41
, High contrast, Cinema, Blackboard (Green), Colorboard, User 1, User 2, User 3 and User 4 by pressing the IMAGE button on the remote pictures in a bright room. Standard Normal picture mode preset on the projector. High contrast Picture mode with improved halftone for graphics. Cinema Picture mode - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 42
a better balance of contrast (from 0 to 15). Note: • When the White balance Red, Green or Blue is adjusted, the Color temp. level will change to User. • Tint cannot be selected when the video system is PAL, SECAM, PAL-M or PAL-N (p. 40). • When Blackboard (Green) or Colorboard is selected in Image - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 43
picture. Film...... For watching a film. With this function, the projector reproduces pictures faithful to the original film quality. Reset To reset the OK button. Use the Point ▲▼ buttons to select one from User 1 to User 4 and press the OK button. A confirmation box appears and then select Yes. - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 44
Setting This projector has the the full screen image. 16:9 Provide the image at the 16:9 wide screen ratio. Zoom Pan the horizontal direction of the image and cut aspect screen image. Custom adj. Adjust the screen scale and position manually with this function. Press the Point ► button at Custom adj - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 45
power cord is unplugged. Ceiling When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector (16:10) ....16:10 is the aspect of the LCD panel. The original Screen Menu is available 16:9 ..... Set - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 46
Setting Setting This projector has a Setting menu that allows you to set up the other various functions described below. 1 Press the MENU button to display the On-Screen Menu. - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 47
to the projector's tilt. Manual......Works only when Lamp are displayed every time the signal is switched. • Only the last selected input source can be detected. Note: • During Auto input is in progress, If the MENU button or the POWER button is pressed, Auto input will stop. If the COMPUTER - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 48
. User........Project projector. Use this function when you want to project the image as early as possible even when the lamp is not bright enough. Off Hide the On-Screen Displays except: ● On-Screen Menu. ● Power off? (p. 22) ● P-Timer display. ● No signal for Power - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 49
the projected image. After capturing the projected image, go to the Logo select function and set it to User. Then the captured image will be displayed the next time you turn on the projector or when you press the BLANK button (p. 28). To cancel the capture function, select Yes in the Quit - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 50
and Key lock will be reset, as well. 1. Unplug the AC Power Cord from the AC outlet. 2. Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights. The Logo PIN code returns to the factory default - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 51
Note: The input/output terminal [Computer 2] does not support EDID. Depending on the computer used, an adjustment of the resolution might be necessary after connection of the terminal. For the adjustment of the resolution please refer to the owner's manual of the computer. * EDID (Extended Display - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 52
Setting Picture in Picture This function is used to project two images simultaneously by placing a separate small sub screen within or next to the main screen. Use the Point ▲▼ buttons to select Picture in Picture and then press the Point ► button or the OK button to access the submenu. Only the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 53
Timer (1~30 min). Note: Factory default is Standby: 5 min. Power management mode Time left before Lamp is off. Setting Direct power on When this function is set to On, the projector will be automatically turned on just by connecting the AC power cord to a wall outlet. Note: Be sure to turn off - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 54
environment, and receive an e-mail about projector status while the projector is powered off. Eco.......... Select Eco when you do not use the projector via network. The projector's network function will stop when turning off the projector. Refer to the user's manual of "Network Set-up and Operation - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 55
Closed caption Closed caption is a printed version of the program sound or other information displayed on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels. Press the Point ▲▼ buttons to select Off, CC1, CC2, CC3 or CC4. If the Closed - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 56
exceeds the recommended total hours of use, the replacement icon will be displayed at the time of power-on. Then the projector will turn off after 3 minutes. Lamp replacement icon • The Lamp replacement icon will not appear when the Display function is set to Off (p.48), during Freeze (p.27), or - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 57
you purchased the projector or the service center. Key lock Setting PIN code lock This function prevents the projector from being projector. On 2....... Enter the PIN code to operate the projector once the power cord is disconnected; as long as the AC power cord is connected, the projector - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 58
and Key lock will be reset, as well. 1. Unplug the AC Power Cord from the AC outlet. 2. Hold down the OK button on the projector and connect the AC Power Cord into the outlet again. Keep holding down the OK button until the POWER indicator lights. The PIN code returns to the factory default setting - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 59
meters or more above the sea level) where the fans have less cooling effect. On 2 Faster than On 1 mode. Select this mode when using the projector in higher altitudes than above where the fans have lesser cooling effect. Note: - The fan noise becomes louder in On 1 and On 2. - Failure to set - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 60
function is executed, all the warning log records will be deleted. Factory default This function returns all setting values except for the User logo, PIN code lock, Logo PIN code lock, Lamp counter and Filter counter and Total power savings to the factory default settings. Factory default 60 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 61
is displayed. Lamp status The selected lamp mode is displayed. Lamp counter The cumulative lamp operating time is displayed. Power management mode Off number of the projector is displayed. The serial number is used to service the projector. Total power savings The saved amount of power and the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 62
cannot be turned on and the WARNING indicator still lights red, unplug the AC power cord and contact the service center. Top Control WARNING lights red 62 WARNING DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER AN ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 63
. Make sure that the filters are fully inserted to the projector. Filter cover (bottom) Handle (pull up) 4 Connect the AC power cord to the projector and turn on the projector. CAUTION - Do not operate the projector with the filters removed. Dust may accumulate on the optical elements - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 64
and in its vicinity. The explosion or fire hazard may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the flammable air spray but also - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 65
lamp. Lift the lamp out of the projector by using the handle. 4 Replace the lamp with a new one and secure the three (3) screws. Make sure that the lamp is set properly. Close the lamp cover and secure the screw. 5 Connect the AC power cord to the projector and turn on the projector. Lamp - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 66
give the following information to the dealer. ● Model No. of your projector : LV-8320 ● Replacement Lamp Type No.: LV-LP34 CAUTION LAMP HANDLING PRECAUTIONS This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 67
16-18. - Make sure all equipment is connected to AC outlet and the power is turned on. - When the projector does not project an image from the connected computer, restart the computer. Problem: - Solutions No power - Plug the power cord of the projector into the AC outlet. - See if the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 68
computer. Some laptop computers may need to change the setting for monitor output when connecting to a projector. See your computer's instruction manual power. settings can not be stored if not registered with Store. See pages 35, 43. Power management mode does not work. - Power - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 69
page 57. WARNING : High voltages are used to operate this projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service center. Specify the model number and explain about the - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 70
1/On 2 Auto PC On/Off Auto keystone Auto Manual Off Blue/User/Black Off /On/Countdown off Logo select Off Default User Capture Yes/No Logo PIN code lock Off/On Logo PIN code change Image Normal/Enhanced Sound HDMI/COMPUTER 2 Terminal COMPUTER 2/Monitor out Picture in Mode P in P/P by - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 71
L1 L2 Off L1 L2 Film Yes/No User 1 User 4 Normal Full 16:9 Zoom Natural wide Custom Custom adj. Keystone Ceiling Rear Screen aspect Reset Scale H&V H/V On/Off Position H/V Common Yes/No Reset Yes/No Default(16:10)/16:9/4:3 Computer Input System (1) SVGA 1 Mode 1 Mode 2 - - - - * Systems - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 72
unplug the AC power cord and contact the dealer or the service center for service and checkup. Do not leave the projector on. It may cause an electric shock or a fire hazard. • • • green • • • red • • • off • • • blinks green. • • • blinks red. When the projection lamp reaches its end - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 73
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V-, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited. ON-SCREEN DISPLAY - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 74
60.00 (Interlace) 50.00 (Interlace) 59.95 Note: • The specifications are subject to change without notice. • Depending on your PC settings, the confirm your PC settings. • When you project a DVI signal, connect the cables, turn the projector on, then select the input. Finally, turn on your PC - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 75
Technical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 13.78" x 3.52" x 10.90" (350.0 mm X 97.0 mm X 276.9 mm ) (Not including protrusions) Net Weight 7.51 lbs (3.4 kg) Feet Adjustment 0˚ to 12˚ Panel Resolution LCD Panel - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 76
Accessories User's Manual (CD-ROM) Important Information and Quick Start Guide AC Power Cord Remote controller and Batteries VGA Cable Lens Cap with String PIN Code Label Soft Carrying Case Filter Cover for Ceiling Mount Warranty Card ● The specifications are subject to change without notice. ● LCD - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 77
System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. For PJ Link password, see the user's manual of "Network Set-up and Operation." Projector Input COMPUTER 1 COMPUTER 2 HDMI VIDEO S-VIDEO ANALOG - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 78
5 Ground (Horiz.sync.) 6 Ground (Red) 7 Ground (Green) 8 Ground (Blue) 9 +5V Power 10 Ground (Vert.sync.) 11 Ground 12 DDC Data 13 Horiz. sync. Input/Output (Composite H/V sync.) 14 Vert. sync. 15 DDC Clock COMPUTER IN 2/MONITOR OUT (ANALOG) Terminal: Analog RGB (Mini D-sub 15 pin) 54 32 1 10 - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 79
Window ANALOG PC COMPUTER 1 COMPONENT SCART COMPUTER 2 ANALOG PC HDMI VIDEO HDMI VIDEO S-VIDEO S-VIDEO COMPUTER 1 COMPUTER 2 HDMI Inputting signal formats: SXGA 20, WUXGA 1, WUXGA 2, WSXGA+1, WXGA+2, UXGA 1, UXGA 2, UXGA 3, UXGA 4, D-1080p PIN Code Protection While the projector is locked - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 80
46.2 (1.28) Appendix 79.7 (3.14) 350 (13.78) 176.3 (6.94) Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.47) 46.0 (1.81) 40.7 (1.60) 216.5 (8.52) 208.0 (8.19) 86.0 (3.38) 64.0 (2.52) 57.9 (2.28) 67.9 (2.67) 8.6 (0.34) 185.2 (7.29) 133.1 (5.24) 115.3 (4.54) - Canon LV-8320 | Multimedia Projector LV-8320 User's Manual - Page 81
Lake Success, NY 11042-1198, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada CANON CANADA INC. MONTREAL BRANCH 5990, Cote-de-Liesse, Montreal Quebec H4T 1V7, Canada
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
 |
 |
MULTIMEDIA PROJECTOR
User’s Manual