Canon LV-8320 User's Manual Network Set-up and Operation for LV-8320
Canon LV-8320 Manual
View all Canon LV-8320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LV-8320 manual content summary:
- Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 1
for the Network function. Read this manual thoroughly to operate the Network function. First, read the user's manual of the projector to understand the basic operation of the projector and the safety instructions. The safety instructions in the user's manuals should be followed strictly. for LV-8320 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 2
Inc. One Canon Plaza, Lake Success, NY 11042-1198, U.S.A. Tel No. (516)328-5600 Canadian Radio Interference Regulations This class B digital apparatus complies with Canadian ICES-003. CAUTION IN USING THE PROJECTOR VIA NETWORKS ● When you find a problem with the projector, remove the power cable - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 3
black circle denotes the specific prohibited action. Safety information WARNING Always mount and operate the product in accordance with the safety instructions specified by the projector and peripheral equipment makers. l Do not attempt to disassemble or service the product yourself. Doing - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 4
instructions...3 Table of contents...4 Chapter 1 Preparation 5 Features...6 Required operating environment for computers 7 Network specifications of the projector...7 Flow of installation...9 Chapter 2 Setup Procedures 11 Connecting 4 Controlling the Projector 31 Power control and status check - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 5
Chapter 1 Preparation Describes features and operating environment of this projector. 1 ENGLISH - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 6
installed on your computer. E-Mail Alert function (+p.25) The projector sends mes- sages to the registered e-mail PC1 PC2 addresses when a lamp abnor- mality or power failure occurs with the projector. This mes- sage describes how to solve the PC3 PC4 cause of the problems. You can - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 7
) 100MB or more CD-ROM drive Support one of following resolutions; VGA (640 32 bit (16.77 million colors)) The computer must provide a 10Base-T or 100Base-TX projector. If you do not use the func- tion E-mail Alert, this application is not required. Network specifications of the projector - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 8
differ from the actual operation depending on your computer environment. Use of this manual This manual does not provide the detailed description of basic operation and functions for computer, web browser, projector and network. For instructions about each piece of equipment or application software - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 9
the Wired LAN connection between computers and projectors, then start projector. ■ Operate and manage the projector ➔ "4. Controlling the projector" (pp.31-43) ➔ "Power Control and status check" (p.32) ➔ "Control" (p.34) ➔ "PC adjustment" (p.38) ➔ "Setting up the projector" (p.39) ➔ "Projector - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 10
Chapter 1 Preparation 10 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 11
Chapter 2 Setup Procedures Describes how to configure the network. 2 ENGLISH 11 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 12
consult your system administrator to set up the LAN appropriately. Connecting to the LAN line Connect the LAN cable to the LAN connection terminal of the projector. LAN Connection Terminal ACT Lamp (Orange) Blink orange when the projector is sending or receiving the data. LAN Cable * Please use - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 13
(p.14). In such cases that the LAN cannot be connected, see this screen. Network setting DHCP: On DHCP: On or Off. When you setup the network setting manually, select "Off". When it is set On, IP *1. IP address Sets IP address of the projector. Subnet Sets Subnet mask according to your network - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 14
"0000". It is recommended to set the Network PIN code if you use the projector via the networks. The Network PIN code can be set also through the networks. or OK button to show LAN setting environment of the currently selected projector. (The description below is an example and different from what - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 15
Network factory default Network factory default 1. Select "Network factory default" in the Network menu and press OK button. 2. A confirmation box appears and select "Yes" and then press OK button. 3. Another confirmation box appears and select "Yes" and then press OK button. 4. All the wired LAN - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 16
Chapter 2 Setup Procedures Wired LAN factory default settings Parameter LAN 1 SELECTED LAN LAN 2 LAN 3 DHCP OFF ON OFF IP ADDRESS 169.254.100.100 192.168.100.100 192.168.100.100 SUBNET MASK 255.255.0.0 255.255.255.0 255.255.255.0 GATEWAY ADDRESS 255.255.255.255 255.255.255.255 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 17
Chapter 3 Basic Setting and Operation Describes basic operations and settings for controlling the projector by using the web browser. It is required that computer and projector is connected to the network and the network address is properly configured. 3 ENGLISH 17 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 18
Login the setting page of the projector [1] Enter the IP address Launch the web browser installed in your computer, enter the IP address into the Log in) button. * The entering User Name must be "user" and it can not be changed. [Note] When accessing the projector for the first time or the Network - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 19
Login the setting page of the projector [3] Display of main setting page The following main setting page will be menu tab. Main menu For selection of control and setting items of the projector. Setting page Displays the control and setting items according to the selected menu. ENGLISH 19 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 20
3 Basic Setting and Operation How to use the setting page To control and set up the projector, use the setting menus on the web browser. Describes the basic operation and procedures commonly used on this manual. Example of the setting page The setting menu appears when clicking the sub menu tab - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 21
Radio button setting Select an item by selecting a radio button. Check box setting Select items by ticking on check boxes. How to use the setting page ENGLISH 21 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 22
Switches display language on the setting page. (Japanese, English) Model name........Indicates the model name of the projector. SERIAL NO. ..........Indicates the serial number of the projector. Network PIN code.......Sets the Network PIN code to login the setting page. (+p.23) PJLink Switches - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 23
code [0000] means no Network PIN code is set. ✐ W hen you connect the projector to the network, it is recommended to set a new Network PIN code. Only it supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1. Projector Input COMPUTER 1 COMPUTER 2 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 24
server, register the host name registered to the DNS server as a projector name. You can access with this projector name from any computers in your network. If you do not use the DNS server, up them correctly, otherwise you cannot connect to the projector. It is recommended to make a note of them. 24 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 25
an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. So must be set this E-mail setting. Click E-mail setting on the main menu and follow the below steps. Item Description - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 26
projector but the SMTP server is down in some other reason, the message will not be sent. In this case, the message "Unable to connect to server and SMTP server cannot be used in your network environment. ✐ The projector does not send message to the address set in "Administrator address" text box - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 27
contents of alert mail" described on the next page. Option ENGLISH ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 28
✐ The projector lamp was turned off, because the projector power circuit failed. Unplug the AC power cord and plug it, and then turn on the projector once again to verify operation. If the problem still persists, unplug the AC power cord and ask servicing to a qualified service personnel with the - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 29
SNMP Setting on the main menu and set up each item. PJ information Item Description Contact Enter user name of the projector etc. (optional). Place Enter place of the projector (optional). Community name(refer).......Enter community name (read only). Default name is "public". Trap Item - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 30
Set button if you tick or un-tick the check box on a page. ✐ "When PJ lamp is off" signifies the lamp goes out without user operation. "When PJ is turned into Standby in proper user operation" signifies that the projector is turned on by using the web browser and then it is turned into standby - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 31
Chapter 4 Controlling the Projector Describes controlling and setting of the projector by using the web browser. 4 ENGLISH 31 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 32
confirmation window Item Description PJ status Power Displays the status of the lamp. (ON, OFF, On starting up, On cooling down, Service in need) Status Displays the status of the projector's power. (Refer to next page.) Power control.........Controls the projector power by clicking the "ON" or - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 33
temp. and sets into standby mode. Power failure Power failure has occurred inside the projector. Projector is turned off. Unplug the AC cord and ask servicing to a qualified service personnel. When a security (PIN code lock) has been set on the projector, you also cannot control it through the - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 34
change pages and select desired setting items. ✐ Please see the user's manual of the projector to have the further information of each control item. Input This mode of the projector. Source Selects signal source of the input. COMPUTER 1 : ANALOG PC COMPONENT SCART COMPUTER 2 : ANALOG - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 35
function is to select the system of signal input to the projector. The available system mode are listed on the pull-down PC input Item Description XGA1 It automatically switches to the proper computer system of the input signal. * The computer system modes (VGA, SVGA, XGA, SXGA, UXGA, WXGA...) - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 36
Sound This function is to adjust the sound of the projector. The values in the text box represent the current control value or status. Item Description Volume Adjusts the sound volume through the network. When using the MIC functions, please set by using the On Screen Menu of the projector. 36 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 37
picture color saturation. (0~ 63) Tint Adjusts picture hue. (0~ 63) Color temp Sets a color temperature mode. {High, Mid, Low, X Low, User, Blackboard(Green), Colorboard} White balance Red, Green, Blue...... Adjusts each white balance respectively. (0~ 63) * When changing the value of the white - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 38
PC adjustment Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper picture image on the screen. Item Description Current mode......Displays a current mode like VGA, SVGA, XGA, SXGA, UXGA, WXGA, etc. or - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 39
setting. Aspect setting This function is to adjust the aspect mode of the projector. The values in the text box represent the current aspect status. Item Switches the aspect mode. (Normal, Full, 16:9, Zoom, True, Natural wide, Custom) There may not be available mode depending on the input mode - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 40
(OFF, Default, User) Setting 2 Item Description Terminal Sets the COMPUTER IN 2/MONITOR OUT power on Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF) Lamp mode.........Selects lamp control mode. (Auto, Normal, Eco1, Eco2) Lamp life control...Selects lamp - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 41
) Total power savings Displays the total accumulated power savings of the projector and the total amount of CO2 exhausted from the projector. Click the projector control items to the factory default setting except the following items. User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 42
Displays the accumulated use time of the projector. Lamp Corres. Value(h).....Displays the use time (Corresponding value) of the lamp. Filter time(h Displays the accumulated use time of the filter. Total power savings..........Displays the total accumulated power savings and the total amount of - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 43
use time, replace lamp immediately) Gray/Blue Gray/Red Lamp off (Normal) Lamp off (Lamp is being used over a specified use time, replace lamp immediately) Red/Blue with X Red/Red with X Lamp failure (Lamp failure, check lamp condition) Lamp failure (Lamp failure and lamp is being used over - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 44
Chapter 4 Controlling the Projector 44 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 45
Chapter 5 Appendix Examples of connection Use of telnet Web browser setting Q & A Menu Tree 5 ENGLISH 45 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 46
: PJ01 IP Address : 192.168.0.2 Subnet Mask : 255.255.255.0 Default Gateway : 0.0.0.0 DNS : 0.0.0.0 Connecting the projector (PJ01) to the control computer (PC05) via the hub. Hub To another network Computer Name: PC05 IP Address : 192.168.0.5 Subnet Mask : 255.255.255.0 Default Gateway - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 47
(Router) installed in the network Connecting the projector (PJ01) to the control computer (PC05) via the gateway. Entrance hall Computer Name IP Address Subnet Mask Default Gateway DNS : PC205 : 192.168.200.5 : 255.255.255.0 : 192.168.200.1 : 192.168.201.1 Projector Name: PJ01 IP Address : 192 - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 48
projector by using the telnet application*1 installed on your computer. Normally, the telnet application is available on your computer. * The telnet 10000 port is used to control the projector be displayed. Type as below to connect the projector. > open 192.168.1.201 10000 [return] *U se the - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 49
table Command Function C00 Power on C02 Power off C09 Volume up C0A Volume down C0B Audio Mute on C0C Audio Mute off C1C Menu display on C1D Menu display off *1 F urther instructions about the telnet application, please see the on-line guide on your computer. *2 The password is - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 50
set up the proxy setting of web browser preference correctly. Especially when connecting the projector and computer with a STP cross cable directly, or when the network does not or applications. Please see the setting instructions on next page for example and also refer to on-line help of your web - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 51
Examples: OS/Browsers Windows XP Professional Web browser setting Internet Explorer v.6.0 ActiveScript setting Select Internet Options from Tools menu on the web browser and then select Security tab and click Customize Level... button. On the security setting window, scroll down and find the - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 52
address and port correctly in the proxy settings window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the item Use a proxy server. If you connect the projector to the computer directly with STP cross cable, this must be unchecked. To designate - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 53
number correctly on HTTP Proxy item. For further instruction please consult your network administrator. - Not using proxy server Select the item Direct connection to the Internet in the proxy setting window. If you connect the projector to the computer directly with STP cross cable, this must be - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 54
Web Proxy Server window. For further instruction please consult your network administrator. - Not using proxy server Uncheck the items Web Proxy (HTTP) and Secure Web Proxy (HTTPS) of Select a proxy server to configure. If you connect the projector to the computer directly with STP cross cable, they - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 55
. Check LED indicators status (☞ p.12). - Check the connection of LAN cable if the LINK Lamp does not light green. - Check the network configuration of the projector if the ACT Lamp does not blink orange. 2. Wrong network configuration of the computer. Check the network configuration of the - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 56
Q W e use the DHCP/BOOTP server to assign the IP address. Is it possible to use the projector in this network environment? A P ossible. This projector supports the DHCP/BOOTP server. To use this projector in this network environment, set it up so that the DHCP/BOOTP server does not assign the IP - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 57
. To control the projector with a web browser, the projector must be in the powered-on condition. Q Why does it sometimes take a lot of time to complete the page display? A The display speed of the page depends on the network environment in which both the projector and computer are placed. It - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 58
, they cannot establish communications each other. In this case, the router is placed in the networks to make the routing. Q Can I control the projector by using the telnet application? A Possible. Please refer to the item "Use of telnet" (☞ p.48 - 49). Q What is the MAC address assigned to - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 59
Q&A Q Can I update the firmware of the projector. A It is possible to update the firmware through the network. It is required to have a special tool for the updating. For further information please consult - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 60
Chapter 5 Appendix Menu Tree Projector Menu Network Web Menu Initial setting Power & Status PC Adj. Control 60 LAN mode select Network setting Network PIN code Network information Network factory default LAN1/LAN2/LAN3 DHCP On/DHCP Off - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 61
DHCP IP address Subnet mask ON/OFF User-ID Password POP server POP server port Default gateway DNS Projector name Information Input System Signal Aspect Lamp status Security PJ time(h) Lamp Corres. Value(h) Filter time(h) Total power savings (kWh)/ (kg/CO2) Network MAC address - Canon LV-8320 | User's Manual Network Set-up and Operation for LV-8320 - Page 62
, 737, YeoksamDong, Gangnam-gu, Seoul, 135-984, Korea OCEANIA CANON AUSTRALIA PTY. LTD. 1 Thomas Holt Drive, North Ryde, N.S.W. 2113, Australia CANON NEW ZEALAND LTD. Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand LV-8320 NETWORK USER'S MANUAL SO-KC2PC 1 © CANON INC. 2011
Wired Setting
Projector Set-up and Operation
User’s Manual
Network Set-up and Operation
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the user's manual of the projector to understand the basic
operation of the projector and the safety instructions.
The safety instructions in the user's manuals should be followed strictly.
for LV-8320