Canon LV7230 Owners Manual
Canon LV7230 - Multimedia Computer TV Projector Manual
 |
UPC - 013803053814
View all Canon LV7230 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon LV7230 manual content summary:
- Canon LV7230 | Owners Manual - Page 1
Multimedia Projector LV-X4 LV-7230 Owner's Manual E English - Canon LV7230 | Owners Manual - Page 2
advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Wide Zoom Lens This projector is equipped with Wide Zoom Lens which is 1.6 times the zoom - Canon LV7230 | Owners Manual - Page 3
the Lens Cover 48 Cleaning the Projection Lens 49 Cleaning the Projector Cabinet 49 Lamp Replacement 50 Lamp Replace Counter 51 Appendix 52 Troubleshooting 52 Indicators and Projector Condition 54 Menu Tree 55 Compatible Computer Specifications 57 Technical Specifications - Canon LV7230 | Owners Manual - Page 4
problem still persists, contact the dealer where you purchased the projector or the service center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING - Canon LV7230 | Owners Manual - Page 5
Follow all warnings and instructions marked on the projector. For added protection to the projector during a lightning storm, projector exhibits a distinct change in performance-this indicates a need for service. When replacement parts are required, be sure the service technician has used replacement - Canon LV7230 | Owners Manual - Page 6
Projector When moving the projector, replace the Lens Cover and retract Adjustable Feet to prevent damage to the lens and cabinet. When the projector transport a projector through a courier or transport services with this bag, otherwise the projector can be damaged. When handling a projector, do not - Canon LV7230 | Owners Manual - Page 7
Compliance Federal Communication Commission Notice Multimedia Projector, Model : LV-X4E, LV-X4U, LV-7230E, LV-7230U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, - Canon LV7230 | Owners Manual - Page 8
Bottom !2 !3 !4 q Focus Ring w Speaker e Power Cord Connector r Infrared Remote Receiver t Zoom Lever y Projection Lens u Lens Cover (See page 48 for and Connectors !2 Air Intake Vent !3 Air Filter !4 Adjustable Feet !5 Lamp Cover !6 Exhaust Vent CAUTION Hot air is exhausted from the exhaust - Canon LV7230 | Owners Manual - Page 9
Scart 21-Pin Video input. (p17.19) w SERVICE PORT This jack is used to service this projector. e AUDIO IN Connect the audio output from video equipment (p18) t USB (Series B) When operating the connected computer with the remote control unit, connect USB port of your computer to this connector with - Canon LV7230 | Owners Manual - Page 10
is in the stand-by mode. It remains green while the projector is under operation. (p54) u LAMP REPLACE indicator Turns yellow when the life of the projection lamp draws to an end. (p50, 54) i WARNING indicator Lights red when the projector detects abnormal condition. This also blinks red when the - Canon LV7230 | Owners Manual - Page 11
red while a signal is being sent from the remote control unit to the projector. e KEYSTONE button Corrects keystone distortion. (p24, button Opens or closes the On-Screen Menu. (p22) !7 D.ZOOM button Selects the Digital zoom +/- mode and resize the image. (p33) !8 NO SHOW button Turns the picture - Canon LV7230 | Owners Manual - Page 12
clear the Spotlight or Pointer displayed on the screen, press the POINTER button toward the projector. Spotlight Pointer PRESENTATION POINTER button POINTER POINTER button Wireless Mouse Operation The remote control unit can be used as a wireless mouse for your computer. Before operating the - Canon LV7230 | Owners Manual - Page 13
button Operating Range Point the remote control unit toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control unit is about 16.4' (5m) and 60° in front of the projector. INPUT WARNING LAMP REPLACE VOL + VO- L KEY STONE SET - Canon LV7230 | Owners Manual - Page 14
moisture or heat. ● Do not drop the remote control unit. ● If a battery has leaked on the remote control unit, carefully wipe the case clean and install new batteries. ● Risk of explosion if the battery is replaced by an incorrect type. ● Dispose of used batteries according to the instructions. 14 - Canon LV7230 | Owners Manual - Page 15
lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be adjusted by menu operation. (p24, 41) Adjustable Feet - Canon LV7230 | Owners Manual - Page 16
plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power being supplied. Connect the projector with all peripheral equipment before turning the projector on. (See page 17-19 for connection.) CAUTION For safety, unplug AC - Canon LV7230 | Owners Manual - Page 17
RGB OUT RGB IN-1 / COMPONENT IN AUDIO R IN L VIDEO IN SERVICE PORT S-VIDEO IN COMPUTER AUDIO IN RESET RGB IN-2 / RGB OUT remote control unit, connect USB port of your computer to the USB socket of the projector. (p9,12 and 44) • When connecting AUDIO OUT to external audio equipment, the projector - Canon LV7230 | Owners Manual - Page 18
VIDEO Cable ✽ • Audio Cable (Mini Plug: stereo Not supplied with this projector.) S-Video Output Composite Video and Audio Output (R) (L) (Video) S-Video IN VIDEO IN RGB IN-1/ COMPONENT IN AUDIO R IN L VIDEO IN SERVICE PORT S-VIDEO IN COMPUTER AUDIO IN RESET RGB IN-2/ RGB OUT AUDIO OUT - Canon LV7230 | Owners Manual - Page 19
Cable ✽ • Component-VGA Cable ✽ (Separately supplied as LV-CA32) (✽ = Not supplied with this projector.) Installation RGB Scart 21-pin Output Component Video Output (Y, AUDIO IN RGB IN-1/ COMPONENT IN AUDIO R IN L VIDEO IN SERVICE PORT S-VIDEO IN COMPUTER AUDIO IN RESET RGB IN-2/ RGB OUT - Canon LV7230 | Owners Manual - Page 20
users from operating the projector. A PIN code consists of a four-digit number. Refer to PIN code lock function in Setting on page 45 and 46 for locking operation of the projector with your PIN code. 16 The preparation display disappears after 30 seconds. Selected Image Level and Lamp Mode Lamp - Canon LV7230 | Owners Manual - Page 21
or on the remote control unit, and a message "Power off?" appears on the screen. 2 Press the POWER button again to turn off the projector. The POWER INDICATOR LIGHTS RED. OTHERWISE IT WILL RESULT IN SHORTENING LAMP LIFE. ✔Note: • The projector cannot be turned on during the cooling period with the - Canon LV7230 | Owners Manual - Page 22
Basic Operation How to Operate the On-Screen Menu The projector can be adjusted or set via the On-Screen Menu. Refer to Point 7 8buttons to adjust value. 22 Quit to exit this menu. Remote Control Unit POINT button POINTER MENU button SET button Top Control MENU SET VO- L VOL + KEY STONE - Canon LV7230 | Owners Manual - Page 23
Basic Operation Menu Bar For computer source Guide Window Shows the selected Menu of the OnScreen adjust size of image. [Normal / True / Wide / Digital zoom +/-] (p33) Setting Menu Used to change settings of the projector or reset lamp replace counter. (p41-46) Input Menu Used to select input - Canon LV7230 | Owners Manual - Page 24
correction. • The direction of the arrow being corrected turns light blue. • If you press the KEYSTONE button on the top control or on the remote control unit once more while the keystone dialog box is being displayed, the keystone adjustment will be canceled. Reduce the upper width with Point - Canon LV7230 | Owners Manual - Page 25
No Show Function Press the NO SHOW button on the remote control unit to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as "User" in the Logo item in the Setting Menu (p42), the screen - Canon LV7230 | Owners Manual - Page 26
Operation Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer - Canon LV7230 | Owners Manual - Page 27
XGA or SXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector projector. ----- There is no signal input from computer. Check the connection of your computer and the projector. ( " Troubleshooting" p52 ) Mode 1 User preset system manually - Canon LV7230 | Owners Manual - Page 28
on the remote control unit. To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once Adjustment function. When the image is not provided properly with this operation, manual adjustments are required. (p29,30) • The Auto PC Adjust cannot be - Canon LV7230 | Owners Manual - Page 29
PC Adjustment enables you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted. It allows you to recall the setting for a specific computer. 1 Press the MENU button and the On-Screen Menu - Canon LV7230 | Owners Manual - Page 30
Computer Input Display area Select the resolution at the Display area dialog box. Display area H Adjusts the horizontal area displayed by this projector. Press the Point 7 8 button to decrease/increase value and then press the SET button. Display area V Adjusts the vertical area displayed by this - Canon LV7230 | Owners Manual - Page 31
the IMAGE button on the remote control unit. Standard Normal picture level preset on this projector. High contrast Picture adjustment for the image projected on a blackboard. See above for further description. Custom User preset image in the Image Adjust Menu (p32). Image Select Menu Image - Canon LV7230 | Owners Manual - Page 32
, move the red frame pointer to the Store icon and press the SET button. The message "OK?" will appear. Select [Yes] to store manual adjustment. To set this manual adjustment, select Custom by pressing the IMAGE button or through the Image Select Menu (p31). "OK?" message Move the pointer to [Yes - Canon LV7230 | Owners Manual - Page 33
the remote control resolution to the lower before connecting to the projector. • The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode. • The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used. Digital - Canon LV7230 | Owners Manual - Page 34
button on the top control or the VIDEO button on the remote control unit. Before using these buttons, correct input source should be When selecting Auto, the projector automatically detects incoming video signal, and adjusts itself to optimize its performance. The projector selects connection in the - Canon LV7230 | Owners Manual - Page 35
Scart 21-Pin) Direct Operation Choose Computer 1 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control unit. Before using these buttons, correct input source should be selected through menu operation as described below. INPUT button Computer 1 Computer - Canon LV7230 | Owners Manual - Page 36
video system, and adjusts itself to optimize its performance. When Video System is PAL-M or PAL-N, select system manually. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM - Canon LV7230 | Owners Manual - Page 37
pressing the IMAGE button on the remote control unit. Standard Normal picture level preset on this projector. Cinema Picture level adjusted for the green colored board, not truly effective on a black colored board. Custom User preset image in the Image Adjust Menu (p38,39). Video Input IMAGE - Canon LV7230 | Owners Manual - Page 38
Video Input Image Level Adjustment 1 Press the MENU button and the On-Screen Menu will appear. Press the Point 7 8 button to move the red frame pointer to the Image Adjust Menu icon. 2 Press the Point d button to move the red frame pointer to the item that you want to adjust and then press the SET - Canon LV7230 | Owners Manual - Page 39
effective on 3:2 pulldown video source. With this function On, the projector reproduces pictures faithful to the original film quality. Reset Resets all appear. Select [Yes] to store the adjustment data. To select this manual adjustment, select Custom by pressing the IMAGE button or through the Image - Canon LV7230 | Owners Manual - Page 40
Video Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. 1 Press the MENU button and the On-Screen Menu will appear. - Canon LV7230 | Owners Manual - Page 41
disconnected. Blue back When this function is "On," the projector produces a blue image while input signal is not detected. Display ● "Wait a moment!" message Logo PIN code lock This function prevents others except specific users from changing the Logo setting. Off . . . . .the Logo setting can be - Canon LV7230 | Owners Manual - Page 42
step to complete entering a four-digit number. When the four-digit number is fixed, the pointer will it to "User". Then the captured image can be displayed when turning on the projector next time • A signal from a computer can be captured up to XGA(1024 x 768). A signal from video equipment can be - Canon LV7230 | Owners Manual - Page 43
or any button on the top control or remote control unit is pressed. Shutdown . . .When the lamp has been fully cooled down, the power will be turned off. Off The Power Management function is canceled. On start When this function is "On," the projector is automatically turned on just by connecting - Canon LV7230 | Owners Manual - Page 44
lamp power consumption and extends the lamp life. The sound is quiet. ✔Note: Lamp mode is not switched into Silent mode within 2 minutes after the projector Pointer. (See page 12 for operation.) Remote control This projector provides eight different remote control codes (Code 1-Code 8);the factory- - Canon LV7230 | Owners Manual - Page 45
use the remote control unit. ···· locks operation of the remote control unit projector from being operated by others except specific users and provides the following settings for your options. Off the projector to complete entering a four-digit number. When the four-digit number is fixed, the - Canon LV7230 | Owners Manual - Page 46
to complete entering a four-digit number. When the four-digit number is fixed, the projector. Cooling the projector for 120 seconds after turning off the projector. Lamp counter reset This function is used to reset the lamp replace counter. When replacing the projection lamp, reset the lamp replace - Canon LV7230 | Owners Manual - Page 47
AC power cord and contact the service station for check and repair. CAUTION DO NOT LEAVE THE PROJECTOR WITH THE AC POWER CORD CONNECTED UNDER THE ABNORMAL CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC SHOCK. TOP CONTROL VOL + KEY STONE LAMP REPLACE WARNING POWER POWER indicator WARNING lights - Canon LV7230 | Owners Manual - Page 48
symptoms above are noticed, contact your authorized dealer or service station for proper cleaning. Air Filter Pull up and remove. Attaching the Lens Cover When moving this projector or while not using it over an extended period of time, replace the lens cover. 1 Pass the string through a hole of - Canon LV7230 | Owners Manual - Page 49
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals might scratch the surface. 3 When the projector is not in use, replace the lens cover. Cleaning the Projector Cabinet Follow these steps to clean the projector cabinet. 1 Disconnect the AC power cord before cleaning. 2 Softly wipe the - Canon LV7230 | Owners Manual - Page 50
ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following information to the dealer. ● Model No. of your projector : ● Replacement Lamp Type No. : LV-X4, LV-7230 LV-LP21 (for LV-X4) (610 315 5647) LV-LP18 (for LV-7230) (610 - Canon LV7230 | Owners Manual - Page 51
should be replaced, i.e., if the LAMP REPLACE indicator lights up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. ( Follow carefully the instructions in the Lamp Replacement section of this manual. ) Continuous use of the lamp with the LAMP REPLACE indicator lighted - Canon LV7230 | Owners Manual - Page 52
Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. - Make sure you have properly connected the projector monitor output when connecting to a projector. See your computer's instruction manual for the setting. - It takes about 30 seconds - Canon LV7230 | Owners Manual - Page 53
of the remote control unit is conformed to the projector. (See page 44.) - Unlock Key lock for the remote control projector. Do not attempt to open the cabinet. If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the service - Canon LV7230 | Owners Manual - Page 54
or the service center for service and checkup. Do not leave the projector on. It may cause electric shock or a fire hazard. • • • lights green. • • • blinks green. • • • lights red. • • • blinks red. • • • off ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator - Canon LV7230 | Owners Manual - Page 55
Sharpness Gamma Reset Store Quit 0 - 63 0 - 63 High Mid Low XLow 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 Yes / No Yes / No Quit Screen Normal True Wide Digital zoom + Digital zoom - 55 - Canon LV7230 | Owners Manual - Page 56
PIN code change Quit Off User Default Yes/No On / Off On / Off Computer 2 Monitor out Off Ready Shut down Timer(1-30 Min) Quit On / Off Normal Auto Silent Spotlight Pointer Quit Code 1 Code 2 Code 3 Code 4 Code 5 Code 6 Code 7 Code 8 Quit Mouse / Projector Off Projector Remote Control Quit Off On1 - Canon LV7230 | Owners Manual - Page 57
projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 130 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION ) 77.07 ON-SCREEN DISPLAY RESOLUTION XGA 11 1024 x 768 XGA 12 1024 x 768 XGA 13 1024 x 768 XGA 14 1024 x 768 XGA 15 1024 x 768 MAC 19 - Canon LV7230 | Owners Manual - Page 58
Projector 11.81" x 3.23" x 8.94" (300mm x82mm x 227mm) (Not including adjustable feet) 6.4lbs (2.9kgs) 0˚ to 11.9˚ Panel Resolution LCD Panel System Panel Resolution Lamp Adjustable from 40" to 300" F 1.7 ~ 2.5 lens with f 20.3 mm ~ 32.5 mm with manual ~ 60 ˚C) Remote Control Unit Battery - Canon LV7230 | Owners Manual - Page 59
Appendix Accessories Owner's Manual AC Power Cord Remote Control Unit and Batteries VGA Cable USB Cable Lens Cover with String and Screw Soft Carrying Bag PIN code Label ● The specifications are subject to change without notice. ● LCD panels are manufactured to the highest possible standards. Even - Canon LV7230 | Owners Manual - Page 60
----- 13 Horiz.sync.Input/Output(CompositeH/V sync.) 14 Vert. sync. Input / Output 15 ----- SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration 876 5 43 21 Serial 1 RXD 2 VGA Cable CEILING HANGER : LV-CA32 : LV-CA31 (This cable is used for RGB Scart 21-Pin Video output of - Canon LV7230 | Owners Manual - Page 61
While the projector is locked with the PIN code... Put a label below on in a prominent place of the projector's body while it is locked with a PIN code. The label is provided with the product to identify the projector locked with a PIN code. Appendix 61 - Canon LV7230 | Owners Manual - Page 62
62 - Canon LV7230 | Owners Manual - Page 63
63 - Canon LV7230 | Owners Manual - Page 64
S.DE R.L.DE C.V. Blvd. M. A. Camacho No.138, Piso PB 15, 16 y 17, Col. Lomas de Chapultepec, C.P. 11000 México, D.F. México CANON EUROPA N.V. P.O.Box 2262, 1180 EG Amstelveen, The Netherlands CANON COMMUNICATION & IMAGE FRANCE S.A. 102, Avenue du General de Gaulle, 92250 La Garenne Colombes, France
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
 |
 |
E
English
Multimedia Projector
Owner’s Manual
LV-X4 LV-7230