Canon MX7600 Network Setup Guide
Canon MX7600 - PIXMA Color Inkjet Manual
 |
UPC - 013803087895
View all Canon MX7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon MX7600 manual content summary:
- Canon MX7600 | Network Setup Guide - Page 1
This manual contains the setup information required to use the machine over wired LAN. If you use the machine with USB connection, refer to your setup sheet. Table of Contents Setup Outline Setting Up the Machine and the Computer (Windows) 1 1 Preparing for Setup 2 2 Installing the Software - Canon MX7600 | Network Setup Guide - Page 2
-connected Computer" on page 27 Setup Complete If any problem occurs during the setup, see "Troubleshooting" on page 30. „ Symbols Used in This Manual This Network Setup Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols - Canon MX7600 | Network Setup Guide - Page 3
Setting Up the Machine and the Computer (Windows) To use the machine connected to a computer, you need to install the software called "MP Drivers" in the computer. The following two connection types are described in this manual. Setting Up for Use over Wired LAN (A) This machine (B) Hub or router - Canon MX7600 | Network Setup Guide - Page 4
, disconnect your network from the Internet. For information on the firewall function of your security software, refer to its instruction manual or contact its manufacturer. Important After setup is complete, turn back on the firewall function you disabled for setup. If you connect to a network that - Canon MX7600 | Network Setup Guide - Page 5
the software. 1 Turn off the machine. Note Confirm that all the lamps on the Operation Panel have gone out. 2 Turn the computer on and start Windows. 3 drive." in "Cannot Install the MP Drivers" on page 31. In Windows Vista, go to step 4. In Windows XP and Windows 2000, go to step 6. Important If - Canon MX7600 | Network Setup Guide - Page 6
on the right appears, click Easy Install. The MP Drivers, On-screen Manuals, and application software are installed automatically. Note If you want to select particular items to install, click Custom Install and follow the on-screen instructions to proceed with the installation. 7 When the Easy - Canon MX7600 | Network Setup Guide - Page 7
Drivers, On-screen Manuals, and application software will begin. The software installation screen may appear during the installation process. Read the contents on the screen and follow the on-screen instructions to install the software Additional LANconnected Computer" on page 11. When the machine - Canon MX7600 | Network Setup Guide - Page 8
software must be installed on the computer. See "1 Preparing for Setup" on page 2 and "2 Installing the Software" on page 3 to confirm that the software procedure after three minutes, see "Cannot Install the MP Drivers" on page 31. 3 When the Setup Preparations dialog box appears, confirm Windows) - Canon MX7600 | Network Setup Guide - Page 9
The machine connected with the USB cable is detected automatically via LAN connection. In Windows Vista, go to step 6. In Windows XP and Windows 2000, go to step 5. Note If the machine was not detected, the Set Printer IP Address dialog box appears. Make sure of the following, then click Connect - Canon MX7600 | Network Setup Guide - Page 10
setup. After software installation is complete, remove any drive letter and try the network setup of the Card Slot again using the Canon IJ Network the Setup Results dialog box. For details, see "Changing the Port Name (Windows)" on page 37. z If "Unsafe Removal of Device" is displayed, click OK. 7 - Canon MX7600 | Network Setup Guide - Page 11
, confirm the message. We would appreciate it if you would take part in the PIXMA Extended Survey Program regarding the use of Canon printers. If you can agree, click Agree. If Do not agree is clicked, the PIXMA Extended Survey Program will not be installed but you can use the machine normally - Canon MX7600 | Network Setup Guide - Page 12
to reinstall the software. When using Windows Vista: To use the Card Slot over network, mount the Card Slot using the Canon IJ Network Tool after software installation is complete. For details, refer to "Using the Card Slot over a Network" in the User's Guide on-screen manual. 10 Setting Up the - Canon MX7600 | Network Setup Guide - Page 13
software must be installed on the additional computer. See "1 Preparing for Setup" on page 2 and "2 Installing the Software" on page 3 to confirm that the software you are setting up. To register the address, use the Canon IJ Network Tool on the computer that has already been set Windows) 11 - Canon MX7600 | Network Setup Guide - Page 14
Select the machine on the Printers dialog box, then click Next. In Windows Vista, go to step 5. In Windows XP and Windows 2000, go to step the setup. After software installation is complete, remove any drive letter and try the network setup of the Card Slot again using the Canon IJ Network Tool. - Canon MX7600 | Network Setup Guide - Page 15
5 When the Setup Completion dialog box appears, click Finish. The network connection between the machine and the computer is now successfully established. 6 When the Setup Complete screen appears, click Next. Setting Up the Machine and the Computer (Windows) 13 - Canon MX7600 | Network Setup Guide - Page 16
, confirm the message. We would appreciate it if you would take part in the PIXMA Extended Survey Program regarding the use of Canon printers. If you can agree, click Agree. If Do not agree is clicked, the PIXMA Extended Survey Program will not be installed but you can use the machine normally. 14 - Canon MX7600 | Network Setup Guide - Page 17
need to reinstall the software. When using Windows Vista: To use the Card Slot over network, mount the Card Slot using the Canon IJ Network Tool after software installation is complete. For details, refer to "Using the Card Slot over a Network" in the User's Guide on-screen manual. Setting Up the - Canon MX7600 | Network Setup Guide - Page 18
Machine and the Computer (Macintosh) To use the machine connected to a computer, you need to install the software called "MP Drivers" in the computer. The following two connection types are described in this manual. Setting Up for Use over Wired LAN (A) This machine (B) Hub or router (C) Computer - Canon MX7600 | Network Setup Guide - Page 19
your security software, refer to its instruction manual or contact its manufacturer. Important After setup is complete, turn back on the In an office setup, consult your network administrator. z Since Mac® OS 9, Mac OS X Classic environments, or Mac OS X v.10.3.8 or earlier are not supported, do not - Canon MX7600 | Network Setup Guide - Page 20
2 Installing the Software To set up an additional LAN-connected computer, you do not need to on the desktop. Important If two CD-ROMs are included in the package for the Windows setup, insert the Setup CD-ROM "Windows (CD-2) Macintosh" for the Macintosh setup. 4 Double-click the Setup icon. 18 - Canon MX7600 | Network Setup Guide - Page 21
z To view the User's Guide on-screen manual in a language other than the installed one, double-click the Manual folder in the Setup CD-ROM, Canon folder, and then copy a language folder to your hard disk. 8 Read the License Agreement carefully and click Yes. Installation of the MP Drivers, On-screen - Canon MX7600 | Network Setup Guide - Page 22
10 When the User software installation is complete, double-click on the desktop. z The User Registration screen may not be displayed depending on the country or region of purchase. If your network is connected to the Internet, the registration screen will appear. Follow the onscreen instructions - Canon MX7600 | Network Setup Guide - Page 23
OS X v.10.3.9, before using the Operation Panel on the machine to save scanned originals to the computer, it is necessary to select MP Navigator EX as the launch application on Image Capture under Applications. For details, refer to "Scanning Images" in the User's Guide on-screen manual. Setting Up - Canon MX7600 | Network Setup Guide - Page 24
12 When the Canon IJ Network Tool screen appears, confirm the connection type. The next procedure varies depending on how you intend to connect the machine and the computer. When you connect the machine to a computer for the first time See "2-1 Setting Up for Use over Wired LAN" on page 23. When the - Canon MX7600 | Network Setup Guide - Page 25
page 17 and "2 Installing the Software" on page 18 to confirm that the software installation is complete, then proceed with the procedure below. 1 On the Canon Drivers have been installed. 2 Select Setup in the pop-up menu, select your machine's name in Printers, then click OK. Note z If no printer - Canon MX7600 | Network Setup Guide - Page 26
Completion dialog box appears, remove the USB cable, then click OK. The network connection between the machine and the computer is now successfully established. The Printer Setup Utility and Canon IJ Network Scanner Selector will start up. 24 Setting Up the Machine and the Computer (Macintosh) - Canon MX7600 | Network Setup Guide - Page 27
machine displayed in the list is the one connected with the USB cable. You need to add the machine connected to the network to the list. 6 On the Printer Browser dialog box, click More Printers. This screen will not appear in Mac OS X v.10.3.9. 7 Select Canon IJ Network in the pop-up menu, select - Canon MX7600 | Network Setup Guide - Page 28
machine's network setting information. See "Checking Information about the Network" on page 38. z For details on how to scan, refer to the User's Guide and Scanning Guide on-screen manuals. After the installation is complete, start up the Canon IJ Network Tool to mount the Card Slot. For details on - Canon MX7600 | Network Setup Guide - Page 29
software must be installed on the additional computer. See "1 Preparing for Setup" on page 17 and "2 Installing the Software" on page 18 to confirm that the software the computer you are setting up. To register the address, use the Canon IJ Network Tool on the computer that has already been set up. - Canon MX7600 | Network Setup Guide - Page 30
is displayed, click Cancel. 6 On the Printer List dialog box, click Add. In Mac OS X v.10.4.x, go to step 7. In Mac OS X v.10.3.9, go to step 8. 7 On the Printer Browser dialog box, click More Printers. This screen will not appear in Mac OS X v.10.3.9. 8 Select Canon IJ Network in the pop-up menu - Canon MX7600 | Network Setup Guide - Page 31
10 On the Canon IJ Network Scanner Selector screen, select Canon XXX Network (where "XXX" is your machine's the Network" on page 38. z For details on how to scan, refer to the User's Guide and Scanning Guide on-screen manuals. After the installation is complete, start up the Canon IJ Network Tool - Canon MX7600 | Network Setup Guide - Page 32
section describes troubleshooting tips for problems you may encounter when setting up. Note If you do not find a description for your trouble here, refer to "Troubleshooting" in the User's Guide onscreen manual. Troubles in setup/connections z "Cannot Install the MP Drivers" on page 31 z "Cannot - Canon MX7600 | Network Setup Guide - Page 33
. (7)Make sure you have no application software running. (8)Follow the procedure described in "Setting Up the Machine and the Computer (Windows)" on page 1 to reinstall the MP Drivers. (1)Click Start then Computer. In Windows XP, click Start then My Computer. In Windows 2000, double-click the My - Canon MX7600 | Network Setup Guide - Page 34
)" on page 16 for proper installation. If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers. Refer to the PC Printing Guide on-screen manual. Note If the installer was forced to be terminated due to a Windows error, the - Canon MX7600 | Network Setup Guide - Page 35
This requires that the DHCP function is enabled on the router. (2)Use next IP address Select to manually specify an IP address, for example if there is no DHCP server functionality in the network environment in Connect to the Machine (the machine is not detected)" on page 32. Troubleshooting 33 - Canon MX7600 | Network Setup Guide - Page 36
function is enabled on the router. Select Use following IP address to manually specify an IP address, for example if there is no DHCP "Cannot Connect to the Machine (the machine is not detected)" on page 32. „ The Enter Password dialog box is displayed Cause The administrator 34 Troubleshooting - Canon MX7600 | Network Setup Guide - Page 37
Windows Firewall function, or open port 137:139 to allow communication with the machine following the procedure below. For information on other security software, refer to its instruction manual ). (6)Confirm that the port names are added on the Exceptions sheet, and click OK. Troubleshooting 35 - Canon MX7600 | Network Setup Guide - Page 38
the Canon IJ Network Tool, refer to "Using the Card Slot over a Network" in the User's Guide on-screen manual. To mount the Card Slot manually, refer to "Cannot Mount the Card Slot" in "Troubles When Using the Machine over Network" in "Troubleshooting" of the User's Guide on-screen manual. z Make - Canon MX7600 | Network Setup Guide - Page 39
Network Settings" of the User's Guide on-screen manual. For details on setting up the machine again, see "2 Installing the Software" on page 3 for Windows or "2 Installing the Software" on page 18 for Macintosh. Click Custom Install in step 6, then select MP Drivers and Canon IJ Network Tool to - Canon MX7600 | Network Setup Guide - Page 40
information, refer to "Displaying Network Setting Information" in "Displaying and Initializing Network Settings" of the User's Guide on-screen manual. „ Confirming the version of Windows XP If you are using Windows XP, you may need to confirm your system version to configure the network setting of - Canon MX7600 | Network Setup Guide - Page 41
39 - Canon MX7600 | Network Setup Guide - Page 42
40 - Canon MX7600 | Network Setup Guide - Page 43
The following ink tanks are compatible with this product. For information on product specifications, please visit our website at www.canon-asia.com canon.com.au www.canon.ca canon.co.nz www.usa.canon.com QT5-0090-V01 XXXXXXXX ©CANON INC.2008 PRINTED IN THAILAND IMPRIME EN THAILANDE
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
 |
 |
Network Setup Guide
Table of Contents
Setup Outline
Setting Up the Machine and the Computer (Windows)
1
1 Preparing for Setup
2
2 Installing the Software
3
2-1 Setting Up for Use over Wired LAN
6
2-2 Setting Up an Additional LAN-connected Computer
11
Setting Up the Machine and the Computer (Macintosh)
16
1 Preparing for Setup
17
2 Installing the Software
18
2-1 Setting Up for Use over Wired LAN
23
2-2 Setting Up an Additional LAN-connected Computer
27
Troubleshooting
30
Cannot Install the MP Drivers
31
Cannot Connect to the Machine (the machine is not detected)
32
The Following Screen is Displayed during Setup
33
Setting Up the Machine Again for Use over Network
37
Changing the Port Name (Windows)
37
Checking Information about the Network
38
This manual contains the setup information required to use
the machine over wired LAN.
If you use the machine with USB connection, refer to your
setup sheet.