Canon REALiS LCOS 4K501ST MULTIMEDIA PROJECTOR 4K501ST Users Manual
Canon REALiS LCOS 4K501ST Manual
View all Canon REALiS LCOS 4K501ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS 4K501ST manual content summary:
- Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 1
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting ENG - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 2
to a network are given in the "Advanced Guide" section. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician, if possible. Contact the Canon Customer Support - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 3
Use This Manual 2 Projector Highlights 4 Safety Instructions 5 Safety Symbols in this Manual 11 26 Preparing the Remote Control 33 Basic Guide 35 Installation Procedure 36 Setting Up the Test Patterns 176 Supported Signal Types 177 Specifications 181 Troubleshooting 187 LED Indicator - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 4
to equipment such as a Blu-ray player/recorder. 4K projection from multiple input terminals - two for HDMI and four for DVI - is also supported, using a multi-input feature. Peripheral Focus Adjustment Image focus can be adjusted on the edges of the screen, enabling use in dome projection. (P113 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 5
again, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 6
Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED. • (1.6') 50 cm (1.6') • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended time - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 7
■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 8
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 9
Safety Instructions Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. 9 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 10
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 11
Safety Instructions Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 12
Safety Instructions Precautions for Use As this section contains important safety-related situations occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke is - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 13
Safety Instructions Safety Instructions Pay attention to the following points regarding the power source, power plug and handling of the connector. Failure to do so may cause a fire, electric - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 14
Instructions Pay , maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including . • For ceiling mounting precautions, refer to the installation manual included with the ceiling mount (sold separately). Precautions on - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 15
Safety Instructions Safety Instructions Note the following precautions during lamp replacement or when . In this case, never attempt to replace the lamp by yourself. Always request service from the Canon Customer Support Center. • With ceiling-mounted projectors, the lamp may fall out when you open - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 16
Safety Instructions Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of time, - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 17
Ceiling Attachment Part No.: RS-CL15 (Option) Safety Instructions Make sure the followings when you install and handle install and handle the ceiling attachment. • Make sure to ask the Canon Customer Support Center if you want to install the ceiling attachment. An inappropriate installation may - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 18
in upward or downward projection. Failure to adjust the settings may shorten the lamp life or damage the lamp. For details, contact the Canon Customer Support Center. • Do not install the projector near high-voltage electrical power lines or an electrical power source. • Do not use the projector on - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 19
may cause damage. • Do not carry or move the projector alone. Have at least one assistant. Precautions for Installation Be sure to read "Safety Instructions" and "For Safe Use" (P5 - P18). Also take the following precautions during installation. • Do not strike the projector or subject it to impact - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 20
above 2,300 m (7,545.8'), Adjust the Settings Projector settings must be adjusted when using the projector at altitudes of 2,300 m (7,545.8') or higher. Specifically, refer to instructions for [High altitude] (P112) in the [Install settings] menu. 20 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 21
Before Installation ■ When Using Mounted on the Ceiling When the projector is used mounted on the ceiling or installed in a high location, it is necessary to periodically clean the air intake and exhaust vents, and the area around the air filter. Dust that accumulates in intake or exhaust vents may - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 22
life of the lamp. • For upward or downward projection, refer to instructions for [Vertical projection] (P112) in the [Install settings] menu. • Always request installation by a qualified technician or the Canon Customer Support Center. 10° 10° Upward projection: Inclination of the projector should - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 23
Before Installation Before Installation Copyright Notice Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright or the copyright holder of the original material. Ensure Network Security Take measures - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 24
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NO SUPPORT Canon Inc., and all its subsidiaries or its dealers do not make any support service regarding the source code. Canon Inc., and all its subsidiaries or its dealers shall not respond to any - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 25
x2) The RS-RC05 can also be used as a wired remote. (P34) • Lens cap • Power cord (1.8 m / 5.9') For Continental Europe • User's Manual (CD-ROM) For the U.S.A. and Canada • Important Information • Warranty Card ■ Lens Cap Always remove the lens cap before projection. Accidentally leaving the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 26
Before Use Part Names Projector ■ Front Side Terminals and connectors (P30) Power cord connector (P59) LED indicators (P28) Air intake vent Air filter (P169) Do not block the air intake. Doing so may cause a malfunction. Anti-theft lock hole An anti-theft wire cable (not included) can be connected - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 27
Side Control (1) (2) Before Use (3) (4) (5) (6) (7) Before Use (1) POWER button (P60, P79) Turns the projector on or off. (2) INPUT button (P63) Switches the input signal. (3) LENS button (P67) Each time the button is pressed, the adjustment window changes, from focus (P67) to zoom (image - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 28
standby or when the projector is shutting down. • WARNING (red) : Lights up or flashes when an error occurs. • LAMP (orange) : Lights up or flashes when a problem occurs with the lamp or lamp cover. • TEMP (red) : Lights up or flashes when the internal temperature is high. 28 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 29
Before Use Before Use ■ LED Indicator Displays Projector operating status is indicated by five LEDs, as shown in the following table. For details on warnings, see "LED Indicator Details" (P187). Example of when the POWER indicator is on; LED indicator POWER STAND BY WARNING LAMP (green) (red - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 30
cable. (2) Digital PC / DVI-D terminal (DVI-D) (P52) Connects the external monitor output from a computer. Receives digital PC signal (Digital PC). (3) Service port (CONTROL) (P184) Used for executing user commands (P185 - P186). (4) LAN port (P130) Connects the LAN cable (shielded twisted pair - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 31
Before Use Before Use Remote Control The remote control allows you to operate all functions of the projector. (11) (1) (12) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) POWER button (P60, P79) Turns the projector on or off. (2) ASPECT button (P72, P96) Changes the aspect ratio mode. (3) Pointer - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 32
Before Use (13) Change input buttons Change the input signal between Digital PC and HDMI. ANALOG 1, ANALOG 2 and COMPONENT are not used with this product. (14) MENU button (P84) Displays a menu on the screen. (15) EXIT button (P86) Cancels functions such as menu display or test pattern during - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 33
Before Use Before Use Preparing the Remote Control ■ Installing Remote Control Batteries 1 Open the battery compartment lid. Raise the battery cover tab while pushing it. 2 Insert batteries. Insert 2 new AA batteries in the compartment with the + and - terminals positioned correctly. 3 Close - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 34
Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 25° 8 m (26.3') 8 m (26.3') 25° 25° • Use the remote control within an angle of 25° in any direction from directly - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 35
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 36
Installation Procedure Before setting up the projector, be sure to read "Before Installation" (P19). Setting Up the Projector ■ Positioning the Projector in Front of the Screen Place the projector in front of the screen. • To avoid keystone distortion, install the projector so that it is at right - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 37
Basic Guide Installation Procedure Installation Procedure ■ Installation on High Surfaces Using the lens shift function (P50), you can project images toward a lower level. When setting the projector - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 38
(25 mm/1.0"): 4 pcs. • M5 screw (12 mm/0.5"): 4 pcs. • M4 screw (15 mm/0.6"): 10 pcs. • Anti-fall wires: 2 pcs. • Washer (Toothed Lock Washer): 1 pc. • Assembly/Installation Manual (this manual): 1 38 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 39
Basic Guide Installation Procedure Installation Procedure ■ Extension pipe RS-CL08 / RS-CL09 (option) be sure to check the strength of the ceiling. The ceiling should be strong enough to support the projector and Ceiling Attachment (and optional extension pipe). If the ceiling is not strong enough - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 40
Installation Procedure Installation Dimensions Projection Distance Height 298 mm (11.7") 236 mm (9.3") 534 mm (21.0") Side view 279 mm (11.0") 263 mm (10.4") 236 mm (9.3") 227 mm (8.9") 100 mm (3.9") 113 mm (4.4") 470 mm (18.5") Front view 113 mm (4.4") Top view 230 mm (9.1") 235 mm - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 41
Basic Guide Installation Procedure Installation Procedure Assembly and Installation ■ Installation to flat and level Ceiling Preparation: Separate the Joint fitting from the Ceiling-mount bracket temporarily Remove - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 42
Installation Procedure 3 Attach the Base bracket to the projector 1 Remove the four screws at each corner on top of the projector. 2 Install the included M6 screws at the four screw fastening positions on the Base bracket. Attach the included toothed lock washer in the back-left position, as shown - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 43
Basic Guide Installation Procedure 7 Hook the Base bracket to the Joint fitting and secure B it temporarily Hook the Base bracket on Joint fitting protrusions (D) and secure it - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 44
Installation Procedure ■ Installation to a High Ceiling Use optional extension pipe RS-CL08 or RS-CL09 for high ceiling. Preparation: Adjust the pipe length according to the ceiling height 1 Remove the covers of outer and inner pipes by slightly sliding them and lift up as shown. 2 Adjust the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 45
Basic Guide Installation Procedure Installation Procedure 1 Separate the Joint fitting from the Ceiling-mount bracket temporarily (Preparation on page 41) 2 Make a hole in the ceiling (Step 1 on - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 46
Installation Procedure 8 Hook the Base bracket to the Joint fitting and secure it temporarily Hook the Base bracket on the protrusion (D) of the Joint fitting, B and secure it temporarily using the four supplied M5 screws (B). • Pull out the cables. • Be sure to secure screws (B) tightly - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 47
Basic Guide Installation Procedure Installation Procedure Adjust the Projection Angle Turn on the projector, project an image, and then adjust the projection angle and screen slant angle. • - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 48
on for a while, the lamp may have ruptured. In this case, never attempt to replace the lamp by yourself. Always request service from the Canon Customer Support Center. • With ceiling-mounted projectors, the lamp may fall out when you open the lamp cover, or during replacement. During replacement - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 49
Basic Guide Installation Procedure Installation Procedure Relationship between Projecting Distance and Image Size The projected image size is determined by the distance to the screen (projection distance), - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 50
the image in all directions by pressing the SHIFT button on the remote control, which moves the lens up, down, left, or right. For instructions, refer to "Adjusting the Image Position" (P70). ■ Amount of Lens Shift The amount of lens shift is indicated as a percentage relative to the image - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 51
Basic Guide Installation Procedure Installation Procedure Maximum vertical (A) and horizontal (B) values are the approximate vertical lens shift distance from the central image position within the supported lens shift range. • (B) values are the approximate horizontal lens shift distance from the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 52
Connection Procedure Before connecting the projector to other equipment, turn off both the projector and the other equipment. For instructions on connecting multiple sources of input for 4K projection, refer to "4K Projection" (P54). Connecting a Computer Computer AUDIO output terminal HDMI - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 53
Basic Guide Connection Procedure Connecting AV Equipment AV equipment HDMI terminal Connection Procedure HDMI terminal HDMI cable (not included) AUDIO OUT terminal Audio cable (not included) Audio cable (not included) Mini jack Amplified speakers RCA terminal 53 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 54
input signals at resolutions up to the maximum 4K resolution of 4096 x 2400. For details, check the table of supported signals. (P177) ■ 4K Digital Signal Compatibility The projector is equipped with DVI-D and HDMI (2.0, HDCP 2.2*1) inputs. DVI-D input is classified as single-link or dual - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 55
Basic Guide Connection Procedure Connection Procedure Resolution Frequency Subsampling Color depth HDMI 1.4 (10.2 specifications are established and managed by Digital Content Protection, LLC. *2 Use an HDMI cable supporting 18 Gbps. ■ Multi Input Mode • DVI-D Using four DVI-D dual-link cables - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 56
the two cables are combined to form a single image. Connect desktop computers by using two HDMI cables Split-screen or four-quadrant projection is not supported when the projector is connected to multiple devices. 56 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 57
Basic Guide Connection Procedure Connection Procedure ■ Settings for Multi Input Mode Select , for projection in a 2x2 layout. • [1x4] setting Supports many specialized signals using four input terminals, for projection side by side. For instructions on turning the projector on, see "Step 1 Turn the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 58
Connection Procedure DVI input mode Specify the combination of DVI input. Choose from [Normal], [Single], [DVI 1x2], [DVI 2x2], or [DVI 1x4]. • When multi input in the [Input] menu (P63) is set to [DVI 1x2], [DVI 2x2], or [DVI 1x4], you can also easily supply signals not included in [Normal] (P179 - - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 59
Basic Guide Connection Procedure Connection Procedure Plugging the Projector In Connect the power cord to the projector and plug it in. • After turning off the projector, wait - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 60
Projection Procedure Step 1 Turn the Projector On 1 Check the connection between the projector and the computer or AV equipment. (P52, P53) For instructions on connecting the power cord, refer to "Plugging the Projector In" (P59). 2 Press the POWER button. The [POWER] indicator initially flashes - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 61
Basic Guide Projection Procedure Projection Procedure ■ When the Language Selection Screen Appears A screen appears when the projector is turned on for the first time. You can select a - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 62
. • The function key you use and the method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 10, Windows 8.1, Windows 8 or Windows 7, you can turn on image output by holding down the Windows logo key and - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 63
Basic Guide Projection Procedure Projection Procedure Step 2 Select an Input Signal Select the input signal in the [Input] menu when you want to project a digital PC or - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 64
Projection Procedure 3 Press the OK button to confirm the input signal type. For multiple input signals, the projection layout is divided as follows. The numbers 1, 2, 3, and 4 in squares represent the numbers of input terminals. [HDMI 1x2] [DVI 1x2] [DVI 2x2] [DVI 1x4] 12 13 13 24 1234 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 65
Basic Guide Projection Procedure Step 3 Adjust the Image Projection Procedure Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 66
Projection Procedure ■ Windows Vista 1 Open the [Control Panel] from the start menu, then select [Appearance and Personalization] - [Adjust screen resolution] in the [Control Panel Home]. 2 Select the resolution closest to the maximum output signal resolution of the projector from the [Resolution] - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 67
Basic Guide Projection Procedure Projection Procedure Focusing, Resizing, or Moving the Image ■ Adjusting Image Focus To adjust the focus, press the FOCUS button on the remote control - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 68
Projection Procedure ■ Adjusting Image Size The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 69
, use the [ ] button on the remote control or projector. 3 When the desired image size is selected, press the OK button or the ZOOM button. Basic Guide Projection Procedure 69 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 70
Projection Procedure ■ Adjusting the Image Position To adjust the screen position up, down, left, or right, press the SHIFT button on the remote control or the LENS button on the projector. It can change the projected screen to the most suitable position by moving the position of the lens up/down/ - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 71
Basic Guide Projection Procedure 2 Press the pointer buttons to adjust. Remote control Projector Projection Procedure Screen To raise or lower the image, use the [ ] / [ ] buttons on the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 72
Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. Select the Aspect Select [Aspect] - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 73
Basic Guide Projection Procedure Projection Procedure Step 5 Adjusting Keystone Distortion To correct , and use corner adjustment to adjust the position of each corner of the image. For instructions on switching keystone adjustment, refer to "Keystone" (P108). • Keystone correction may not be - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 74
Projection Procedure 2 Press the pointer buttons to adjust the dimensions. Remote control Projector To correct top distortion, press the [ ] button. To correct bottom distortion, press the [ ] button. Screen To correct distortion on the left, press the [ ] button. To correct distortion on - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 75
Basic Guide Projection Procedure Projection Procedure 2 Press the pointer button of the corner for correction, and then press the OK button. Remote control Projector 3 Press the pointer - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 76
Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma (P101), color adjustment, advanced adjustment (P102), and lamp mode. (P105) Image Modes - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 77
Basic Guide Projection Procedure Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 78
Projection Procedure ■ Switching the mode to the DICOM SIM Mode 1 Press the IMAGE button on the remote control until [DICOM SIM] is displayed or select [DICOM SIM] from [Image mode] in the [Image adjustment] menu. 2 Press the TEST PATTERN button on the remote control until [DICOM] is displayed or - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 79
Basic Guide Projection Procedure Projection Procedure Step 7 Turn the Projector Off 1 Press the POWER button to display the window shown below. Remote control Projector 2 When this window - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 80
Convenient Features This section describes features convenient during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience's attention away from the screen. Remote control Press the BLANK button - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 81
Basic Guide Convenient Features Convenient Features Specifying Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 82
82 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 83
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 84
Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P95) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P99) You can adjust - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 85
Advanced Guide Using Menus Basic Menu Operations 1 Press the MENU button to display the menu window. Remote control Projector Using Menus 2 Press the [ ] / [ ] buttons to select a tab. - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 86
Using Menus Selecting from a list Example: Aspect (P96) 1. Select [Aspect]. 2. Press the OK button or [ ] button to display a list of the contents. 3. Use the [ ] / [ ] buttons to select the desired contents. 4. When you have found the contents you desired, press the OK button or [ ]. Adjusting with - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 87
Advanced Guide Menu Configuration Menu Configuration Input settings (P95) Aspect Input level Super white Color space Progressive Input signal details Auto* True size HDMI Auto* Normal Expanded - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 88
Menu Configuration Color adjustment Advanced adjustment Ambient light Random noise reduction MPEG noise reduction Dynamic gamma Mem. color correct 6-axis color adjust Fine-Tune Gamma Lamp mode Reset Color level Color balance Color temperature R Gain G Gain B Gain R Offset G Offset B Offset P102 Off - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 89
Advanced Guide Menu Configuration Install settings (P107) Positional lock Image flip H/V Keystone Professional settings Panel drive mode Multi input mode select HDMI-1 EDID HDMI-2 EDID DVI optimizer - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 90
Menu Configuration Vertical projection Fan speed setting Marginal focus Edge blending Lens - Position Screen color Iris Test pattern Off* Upward Downward Normal* High speed Off* On Reset Off* Adjust Load position 1-3 Save position 1-3 Lens shift reset Normal* Greenboard Adjust Open* Close 1-3 Off - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 91
On screen Menu position Menu display time Guide Show input status Lamp warning display Air filter warning display * Menu Configuration P120 P120 P121 P121 P121 P121 P122 P122 P122 P122 P123 Advanced Guide Menu Configuration * Factory default, or state after [Factory defaults] is executed. 91 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 92
Menu Configuration Audio in terminal select DVI-1 DVI-2 DVI-3 DVI-4 HDMI-1 HDMI-2 DVI 1x2 DVI 2x2 / 1x4 HDMI 1x2 Serial communication Power management mode Power management duration Direct power on Motion blur reduction Language P123 Off Audio in* Off Audio in* Off Audio in* Off Audio in* Off Audio - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 93
P129 Yes / No OK / Cancel Menu Configuration Off* Adjust Off* Adjust P127 P128 P128 P128 P128 P129 P129 P129 Advanced Guide Menu Configuration Network settings (P131) Network settings lock Unlock Lock* Network password setting Off On* Register network password P132 Network standby - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 94
Menu Configuration PJLink Off On* AMX Device Discovery Off* On Crestron RoomView Off* On Information (P138) Model name Input signal Firmware Serial no. Projector usage time IP address E-mail sender address E-mail recipient address Projector name Comments System information ID P136 P137 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 95
signal details for each input terminal used. Menus that are not available are grayed out or hidden. Details P96 P96 P96 P97 P97 P98 Advanced Guide Menu Settings 95 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 96
[Auto] mode, the signal level is selected automatically. (Some equipment may not support this.) • If HDMI output can be set to [Normal] or [Expanded], ] or [Expanded]. For more detailed information, refer to the user's manual for the AV equipment connected to the projector. Super white > [Input - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 97
video (25 or 30 fps, respectively). Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of fast-moving action. Advanced Guide Menu Settings 97 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 98
Menu Settings Input signal details > [Input settings] > [Input signal details] Shows input signal details for each input terminal used, for input signals selected in the [Input] menu. In Multi Input mode, terminals with incorrect input can be identified by a " " icon, which is displayed for input - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 99
Menu Settings Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. Advanced Guide Menu Settings (When the input signal is HDMI-1) Menu Function Details Image mode * Select overall image quality to suit the projected image. P100 Create - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 100
Menu Settings Image mode > [Image adjustment] > [Image mode] Select the overall image quality for projected images. Can also be selected by pressing the IMAGE button on the remote control. Option Types of Images Characteristics Standard Computer screens, or media played with video software - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 101
Advanced Guide Menu Settings Menu Settings Create profile > [Image adjustment] > [Create profile] Save desired image quality settings in up to 3 user profiles. • The saved settings consist of - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 102
Menu Settings Color adjustment > [Image adjustment] > [Color adjustment] Adjust color-related settings such as color level, color balance, and color temperature. (In image modes other than DICOM SIM.) Submenu Color level Color balance Color temperature R / G / B Gain R / G / B Offset Function - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 103
image noise. Option Off Weak Middle Strong Function Disables MPEG noise reduction. Specify one of three levels of intensity of the MPEG noise reduction. Advanced Guide Menu Settings 103 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 104
Menu Settings Dynamic gamma You can adjust the gradation representation of light and dark portions of an image automatically. Option Function Off Disable dynamic gamma adjustment. Weak Middle Specify one of three levels of dynamic gamma adjustment. Strong Mem. color correct (Flesh/Sky/ - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 105
separately. Adjustments to white are also applied to the three other colors. Note that adjusting any color will overwrite previous adjustments. Advanced Guide Menu Settings Use the [ ] / [ ] buttons to select a color, and then press the OK button. Next, use the [ ] / [ ] buttons to select an - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 106
Menu Settings • Performing reset when [Image mode] is set to a profile from [User 1] to [User 3] will restore the settings originally saved for that user profile. • Only the setting for the combination of input signal and image mode for the current projection is reset. • The following settings are - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 107
improves contrast. Project a test pattern to check the resolution and color of projection during installation. Details P108 P108 P108 P109 P116 P116 P117 P117 Advanced Guide Menu Settings 107 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 108
in both vertical and horizontal directions. • To hang the projector from the ceiling, use the optional bracket. Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment. • Adjusting - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 109
Professional settings > [Install settings] > [Professional settings] Specify advanced installation settings. Menu Settings Advanced Guide Menu Settings Panel drive mode Select the LCD panel vertical resolution to use. Option Function 4096x2160 Use a resolution of 4096 x 2160 lines. - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 110
the projector because the EDID is not read correctly by connected equipment when set to 18Gbps. • Even if this function is used, the list of supported video formats may not be updated when [HDMI input mode] in [Multi input mode select] is set to [HDMI 1x2]. • Use the HDMI-1 terminal when - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 111
the screen is possible by color and area. For detailed instructions, refer to "Advanced Registration to Adjust Projected Images" misalignment. Advanced registration Submenu 5-point adjustment Manual adjustment Reset Function Off Disable adjustment. artifacts. Advanced Guide Menu Settings 111 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 112
. • Any values you set in 5-point adjustment are retained if you subsequently perform manual adjustment. For more precise correction after 5-point adjustment, perform manual adjustment. • Any manual adjustment values you set before switching to 5-point adjustment are cleared. High altitude Switch - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 113
control can be used to activate and deactivate this focus adjustment. For detailed instructions, refer to "Adjusting Peripheral Focus" (P165). Option Function Off Disable remote focusing by fine-tuning gamma (4) Corner adjustment, using keystone correction Advanced Guide Menu Settings 113 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 114
Menu Settings Submenu Side Function Submenu Left Right Top Bottom Width Function Select the direction of the blending area to adjust. Specify the width between the start and end markers. Moves the position of the start marker. Start position • Large blending areas may cover input signal dialog - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 115
Advanced Guide Menu Settings Submenu Black level adjustment Marker Reset Menu Settings Function Because black is lighter in the blending area than in other areas, you can - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 116
Menu Settings Lens - Position > [Install settings] > [Lens - Position] The projector can store information about the lens position. Up to three sets of lens information (including, focus, zoom, and lens shift settings) can be saved, and the lens can be restored to these positions as needed. - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 117
with the [ ] / [ ] buttons. • The test pattern menu is no longer displayed after a little while, but you can view it again by pressing the [ ] / [ ] buttons. Advanced Guide Menu Settings 117 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 118
Menu Settings System settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. (When the input signal is HDMI-1) Menu User screen settings On screen Remote control/Side control Audio in terminal select Serial - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 119
User screen settings > [System settings] > [User screen settings] Capture a logo and specify logo display settings. Menu Settings Advanced Guide Menu Settings Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 120
(P113) - Aspect (P72) - Image mode (P76) - Gamma (P101) - Volume adjustment (P27, P32) [Normal] [Extended] 30 seconds 3 minutes 10 seconds 3 minutes The window for manual adjustment or 5-point adjustment in RGB alignment is shown for 3 minutes, regardless of the [Normal] or [Extended] option. 120 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 121
Menu Settings Guide Shows the guide screen. Option Off Hides the guide screen. On Shows the guide screen. Function The guide screen is shown at the following cases. • No input signal is detected. • An invalid button is pressed in [BLANK] or [FREEZE] mode. (P32) • When positional - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 122
Menu Settings Overheat warning display Specify whether the icon warning of high temperature is shown when the internal temperature is high and the projector may overheat. Option Function Off Disable high temperature warning icon display. On Enable high temperature warning icon display. - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 123
signals from HDMI-1 are output. Only available when the input signal is set to [HDMI-2] or [HDMI 1x2]. Audio signals from HDMI-2 are output. Advanced Guide Menu Settings 123 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 124
Menu Settings Serial communication > [System settings] > [Serial communication] You can check setting values for the service port (CONTROL) used for serial communication. Option Baud rate Data bits Parity Function Modulation rate, in bits per second. Number of bits of data. Number - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 125
[Weak] produces distracting flickering, set it to [Off]. • [Motion blur reduction] is not available in [DICOM SIM] image mode. The menu is grayed out. Advanced Guide Menu Settings 125 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 126
Menu Settings Language > [System settings] > [Language] Select the menu display language. Language English Russian German Dutch French Finnish Italian Norwegian Spanish Turkish Portuguese Polish Swedish Hungarian Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 127
operation with a password, set a password, reset counters for lamp or air filter replacement, and access other settings and information. Advanced Guide Menu Settings Password settings Disables the projector unless the correct password is entered. Option Function Off The projector can be used - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 128
Menu Settings Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the pointer buttons [ ] (1) / [ ] (2) / [ ] (3) / [ ] (4) or the number buttons on the remote control. The 4-digit password is entered from the left to right - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 129
Insert the USB flash drive in the USB port. 3. Follow the instructions shown to complete the update process. • Firmware versions shown here to download updates. For details, contact the Canon Customer Support Center. • Firmware updating takes a few minutes. During the Guide Menu Settings 129 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 130
that the projector IP address does not overlap with other computers that are on the same LAN. To set a projector IP address, follow the instructions in "Completing Computer Settings for a Network Connection" (P139) and use the web screen, or use projector TCP/ IP settings. (P134) • When you connect - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 131
Discovery Enable or disable AMX Device Discovery. Crestron RoomView Enable or disable Crestron RoomView. Details P132 P132 P132 P133 P133 P134 P136 P137 P137 Advanced Guide Menu Settings 131 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 132
Menu Settings Network settings lock > [Network Settings] > [Network settings lock] You can lock/unlock the network settings so that they cannot be changed. Option Unlock Lock Function Cancels the lock and allows other network settings to be changed. The password must be entered in order to - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 133
] > [Network function] Enable or disable network function. Specifying [Off] can save energy. Option Off On Function Disable the network function. Enable the network function. Advanced Guide Menu Settings 133 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 134
address of the projector. MAC address of the projector. Submenu Off On Function Disables the DHCP function. TCP/IP settings must be configured manually. Enables the DHCP function. Searches the DHCP server. TCP/IP settings cannot be configured (IP address, subnet mask, and gateway address), because - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 135
) Settings configured from the web screen • [Password] (P146) • [Network] (P147) • [Mail] (P148) • [Mail auth] (P149) • [SNMP] (P150) • [Projector info.] (P150) • [PJLink] (P151) Menu Settings Advanced Guide Menu Settings 135 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 136
to Class 1 as defined in PJLink standards established by the Japan Business Machine and Information System Industries Association (JBMIA). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 137
management of multiple projectors over a network. Networked projectors can be remotely controlled to troubleshoot issues, check the useful life of lamps, or turn the projectors on or off Crestron RoomView, visit the Crestron® website. http://www.crestron.com/ Advanced Guide Menu Settings 137 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 138
Menu Settings Checking Projector Information You can check information about the signal types of the images projected and other information. Menu Function Model name Shows the model name. Input signal Details of the input signal currently selected Information such as the type, resolution, - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 139
on a Network Completing Computer Settings for a Network Connection Specifying an IP Address Instructions for setting a computer's IP address are as follows for each operating system. button in the [Ethernet Properties] window to close it. 139 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 140
Using the Projector on a Network ■ Windows 8.1 / Windows 8 1 Right-click on the start screen background and click [All Apps] in the lower right. • Windows 8.1 Users: Click the down arrow in the lower left of the start screen. 2 Click [Control Panel]. • From the Desktop: Press Win+X. In the shortcut - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 141
settings are completed, click the [OK] button and then click the [OK] button on the [Local Area Connection Properties] window to close it. 141 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 142
Using the Projector on a Network ■ Mac OS X 1 Open the Apple Menu and select [System Preferences]. 2 In the System Preferences window, click [Network] to display the Network window. 3 Select [Built-in Ethernet] and click the [TCP/IP] tab. Make a note of the original network settings (IP address, - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 143
web browser, enter "http://(projector IP address)" in the address bar, and press the Enter key. The projector web screen appears. Advanced Guide Using the Projector on a Network The following information is displayed. Projector control Settings Projector name Comment MAC address IP address Power - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 144
Using the Projector on a Network 4 Enter the user name and password on the password input window, then click [OK]. The factory default user name is "root" and the password is "system". The settings screen is displayed. Complete the network settings on this screen. To control the projector from the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 145
Using the Projector on a Network 2 Enter setting details in the fields shown (1), and then click [OK] (2). (1) (2) 3 A confirmation window appears. Check the contents and if they are correct, click [Apply]. 145 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 146
Using the Projector on a Network The settings are applied to the projector. Selecting [Network] or [Password] in the menu will cause this message to be displayed: "Save completed. Please change setting and reconnect." If you select functions other than above, "Save completed" is displayed. Click [ - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 147
, you can log into the web screen and set basic network information. For the setting procedure, refer to "Network Setting" (P144). Advanced Guide Using the Projector on a Network Item MAC address DHCP IP address Subnet mask Default gateway Explanation Shows the projector's MAC address. Select - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 148
Using the Projector on a Network Setting Up Email [Mail] From [Mail] in the settings screen, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to "Network Setting" (P144). Item Error report To: Cc: From: SMTP server IP address SMTP server port - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 149
to the specified mail address by clicking [Send test mail] at the bottom of the screen. The settings cannot be changed from this screen. Advanced Guide Using the Projector on a Network 149 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 150
Using the Projector on a Network SNMP Settings [SNMP] From [SNMP] in the settings screen, you can configure the settings related to control of projectors which use SNMP (Simple Network Management Protocol). For the setting procedure, refer to "Network Setting" (P144). Item SNMP Receive community - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 151
a network. For the setting procedure, refer to "Network Setting" (P144). For information about PJLink, refer to "What is PJLink?" (P136). Advanced Guide Using the Projector on a Network Item PJLink PJLink authentication Password Confirm password Explanation Turn the PJLink function on or off. If - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 152
when sending a test mail. Failed to connect to the POP3 server attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test mail failed due to a connection failure with the SMTP server or - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 153
Default Settings 1 Perform steps 1 - 3 on "Displaying the Network Configuration Screen" (P143) to display the settings screen. 2 Click [Initialize]. 3 A confirmation window appears. Click [OK]. 153 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 154
The temperature inside the projector is too high for some reason or the outside air temperature is higher than the specified one. If the problem is inside the projector, check whether the projector is installed and operated normally, turn off the projector to cool its inside, and retry projection - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 155
window, then click [OK]. The factory default user name is "root" and the password is "system". The projector control screen appears. Advanced Guide Using the Projector on a Network The projector can be controlled from this screen. Item Projector name Comment Refresh Power Input Aspect Image mode - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 156
Using the Projector on a Network 5 When the operations are finished, click [Back to top] to return the initial web screen. 156 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 157
can be adjusted to make them blend in better. ■ Basic Instructions Follow these steps when using two projectors side by side. 1 . Values indicated for this blending area are adjusted to match manually entered blending area values. Shading is applied to this area, Advanced Guide Advanced Projection - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 158
toward the center of the image) is called area "D." Normally, three areas are identified in the context of end markers: A, B, and C. In the following instructions, only area D is adjusted, and the widths of A, B, and C are left at the default value of 0. To prepare for adjustment, set [No signal - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 159
brightness and colors of the blending area and area D match. Advanced Guide Advanced Projection Adjust [D-area base] to lighten the black level, and and C must be adjusted to suit these blending areas. In this example, instructions are given for adjusting area B. 1 In the [Install settings] menu, - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 160
Advanced Projection 3 Select [B-width], and then specify the width of area B. Adjust the width of area B so that it roughly matches the area where the black level of area B stands out. This will make the width of area D narrower. 4 Select [Adjustment type] > [Black level]. Adjust [B-area base] as - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 161
available: 5-point adjustment (using points in the corners and center of the screen) and more precise manual adjustment based on 54 points (in a 6 x 9 grid). Any values you set in 5-point adjustment image areas may be affected by uneven colors or image artifacts. 161 Advanced Guide Advanced Projection - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 162
Advanced Projection 2 Use the buttons to select the point for correction, and then press the OK button. The projector enters color selection mode. Press the MENU button to return to [Advanced registration]. 3 Select [Red] or [Blue] as the color, and then press the OK button. • Each time you select - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 163
Professional settings] > [RGB alignment] > [Advanced registration] > [Adjust] > [Manual adjustment]. The projector enters manual adjustment mode, and a chart is displayed. • Charts (point selection windows) of MENU button to return to [Advanced registration]. 163 Advanced Guide Advanced Projection - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 164
OK button. • Each time you select [Chart] and press the OK button, display switches between the chart and the source signal. • Accessing the manual adjustment window during test pattern projection will show the test pattern instead of your supplied signal. 4 Use the buttons to align the adjustment - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 165
to display the marginal focus adjustment window. Projector Press twice. When [Marginal focus] is set to [On]. When [Marginal focus] is set to [Off]. Advanced Guide Advanced Projection 165 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 166
Advanced Projection 2 Press the pointer buttons to adjust the focus at image edges. Remote control Projector Press the buttons to adjust peripheral focus. 3 Once image edges are in focus, press the OK or FOCUS button. ■ Resetting Adjustment Clears the values set in marginal focus adjustment. In - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 167
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 168
projector. • When using a chemical dust cloth, make sure to read the instructions thoroughly. • When cleaning the projector's lens, use a commonly available air blower . Once a year, request internal cleaning from the Canon Customer Support Center. (Note that a fee is charged.) Cleaning before damp - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 169
is no longer displayed. • This screen is not displayed when [Air filter warning display] is set to [Off]. (P121) Reset the air filter counter manually. (P129) Replacing the Air Filter Follow the procedure below when replacing the air filter. 1 Turn off the projector power and remove the power plug - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 170
Maintenance 2 Pull out the filter cover tab on bottom while lifting up. 3 Open the filter cover and remove it. 4 Remove the air filter. 5 Holding the new air filter by the tab, insert the air filter in the projector. 170 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 171
carefully. If damaged, the air filter will not work properly. • To purchase a replacement air filter (part no: RS-FL03), contact the Canon Customer Support Center or visit the Canon website. • Replace the air filter when you replace the lamp. An air filter is included with orders of a replacement - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 172
after you turn it on, the lamp may be broken. In this case, never attempt to replace the lamp by yourself. Always request service from the Canon Customer Support Center. Additionally, with ceiling-mounted projectors, the lamp may fall out when you open the lamp cover or while you are attempting to - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 173
care. Impact or abrasion may cause lamps to rupture while they are in use. If a lamp ruptures, contact the Canon Customer Support Center and follow the instructions in "Precautions when replacing lamps that stop working" (P15). • When replacing the lamp, do not remove any screws other than those - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 174
Maintenance 3 Hook your finger around the lamp cover handle, and open the cover in the direction of the arrow. The lamp cover screw is attached to the lamp cover to prevent it from falling off. 4 Loosen the 3 screws on the inside of the lamp unit, and then slowly pull out the lamp unit in the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 175
replace the lamp. An air filter is included with orders of a replacement lamp (part no: RS-LP10F). • To purchase a replacement lamp, contact the Canon Customer Support Center or visit the Canon website. 175 Other Information Maintenance - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 176
Product Specifications Displayed Test Patterns To access the test pattern menu, from the [Install settings] menu, select [Test pattern] (P117) > [On], or press the TEST PATTERN button on the remote control. While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch patterns. - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 177
Product Specifications Supported Signal Types The projector automatically projects input signals correctly from computers or AV equipment compatible with any of these signals. HDMI (single) 1 Signal resolution 640x480 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 178
in the EDID. No information is provided in the EDID for fields that are blank, so the computer output format must be configured manually. HDMI 1x2 1 2 FP : Front porch SW : Sync width BP : Back porch Combined multi input resolution Resolution at each input terminal Horizontal frequency [kHz - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 179
in the EDID. No information is provided in the EDID for fields that are blank, so the computer output format must be configured manually. DVI 1x2 1 3 FP : Front porch SW : Sync width BP : Back porch Combined multi input resolution Resolution at each input terminal Horizontal frequency [kHz - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 180
for fields that are blank, so the computer output format must be configured manually. Active video Blanking interval FP SW BP Active video Video signal Sync signal set to [4096x2160]. *3 Only YCbCr 4:2:0 is supported when [HDMI-1(2) EDID] is set to [9Gbps]. (RGB, YCbCr 4:4:4, and YCbCr 4:2:2 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 181
Specifications Product Specifications ■ Projector Model name Display system Optical system 4K501ST RGB liquid crystal system: reflective (LCOS) : 3 panels Color separation by dichroic mirror / polarizing beam splitter and color composition by prism Projection lens Display device Type / No. of - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 182
dry-cell batteries, power cord, Accessories lens cap, Important Information, User's Manual (CD-ROM) and Warranty Card *1 With [Lamp mode] set to Only low frequencies (24-30 Hz) supported *4 Only supported when [Panel drive mode] is set to [4096x2400] *5 EDID not supported * 99.99% or more of the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 183
Product Specifications ■ Remote Control Model number RS-RC05 Power supply DC 3.0V, using two AA-size batteries Operating range Approx. 8 m / 26.2' ±25° horizontal and vertical (to infrared remote receiver) Dimensions 51 mm (W) x 28 mm (H) x 176 mm (D) / 2.0 (W) x 1.1 (H) x 6.9 (D) in Weight - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 184
Product Specifications ■ Service Port (CONTROL) Pin assignment Pin No. Signal 1 OPEN 2 RxD 3 TxD 4 OPEN 5 GND 6 OPEN 7 Internal pull-up 8 OPEN 9 OPEN Communication format Communication mode : RS-232C, asynchronous, - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 185
Product Specifications Main user commands Commands Power on Power supply Power off Power status acquisition HDMI-1 HDMI-2 HDMI 1x2 DVI-1 DVI-2 Input source DVI-3 DVI-4 DVI 1x2 DVI 2x2 DVI 1x4 Input source acquisition Standard Presentation Photo/sRGB DICOM SIM Image Mode Dynamic Video User 1 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 186
Product Specifications Commands ASCII representation Brightness acquisition GET=BRI Sharpness Sharpness value setting SHARP= Sharpness acquisition GET=SHARP Contrast Contrast value setting CONT= Contrast acquisition GET=CONT Aspect Auto True size - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 187
reason or the outside air temperature is higher than the operating range. If the problem is inside the projector, check whether the projector is installed and operating normally, again. Contact the Canon Customer Support Center if the same warning occurs again. Other Information Troubleshooting 187 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 188
Troubleshooting LED indicator status WARNING (only) flashes 5 times repeatedly. Meaning Faulty then plug it back into the outlet and turn on the projector again. Contact the Canon Customer Support Center if the same warning occurs again. Symptoms and Solutions ■ You Cannot Turn on the Projector - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 189
incorrect. The BLANK function has been selected. No image is projected due to a problem with the computer. The external monitor output is not set on the notebook computer . For more detailed information, refer to the manual that came with your computer. Other Information Troubleshooting 189 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 190
Troubleshooting Cause The displayed image is not the same as that displayed on the mode. The output setting method varies among computer manufacturers. For more detailed information, refer to the manual that came with your computer. ■ There is no Sound Cause The audio cable is not connected - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 191
clogged, clean or replace the air filter. (P168, P169) If the lamp has ruptured, follow the instructions in "Precautions when replacing lamps that stop working" (P15). Check whether the operating temperature is between 0°C and then try to connect again. (P143) Other Information Troubleshooting 191 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 192
Troubleshooting ■ You Cannot Operate the Remote Control Cause Batteries are not installed properly or they have run out. You are operating the remote control from the - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 193
Index Numerics G 6-axis color adjust 104 Gamma 101 A Adjusting keystone distortion 73 Air filter 26, 168, 169 Ambient light 103 AMX Device Discovery 137 ASPECT 72 Aspect 72 AUDIO IN terminal 30 AUDIO OUT terminal 30 Auto (Aspect 72 B BLANK 80 Brightness 101 C Ceiling mounted 37, 38 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 194
Index O OK 27, 31 Optical zoom 68 P Password 127, 128 PJLink 136, 151 POWER 60, 79 Projecting from Multiple Projectors at Once (Edge Blending 157 Projector on 119 R Rear projection 37, 108 Remote control 31, 32, 33, 123 Reset 75, 105, 129 S Screen color 116 Selecting a language 61, 126 - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 195
Option • Ceiling attachment Part No.: RS-CL15 • Ceiling-mount pipe (400 - 600 mm / 15.7 - 23.6 in) Part No.: RS-CL08* • Ceiling-mount pipe (600 - 1000 mm / 23.6 - 39.4 in) Part No.: RS-CL09* • Air filter Part No.: RS-FL03 • Lamp assembly with replacement air filter Part No.: RS-LP10F • Remote - Canon REALiS LCOS 4K501ST | MULTIMEDIA PROJECTOR 4K501ST Users Manual - Page 196
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET
Safety Instructions
Before Use
Basic Guide
Installation Procedure
Connection Procedure
Projection Procedure
Convenient Features
Advanced Guide
Using Menus
Menu Configuration
Menu Settings
Using the Projector on a
Network
Advanced Projection
Other Information
Maintenance
Product Specifications
Troubleshooting
ENG
MULTIMEDIA PROJECTOR
User’s Manual