Canon REALiS LCOS 4K600STZ 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual
Canon REALiS LCOS 4K600STZ Manual
View all Canon REALiS LCOS 4K600STZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Canon REALiS LCOS 4K600STZ manual content summary:
- Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 1
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting ENG - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 2
to a network are given in the "Advanced Guide" section. Read this manual thoroughly to make the most of your projector. Installation of the projector should be performed by a qualified technician, if possible. Contact the Canon Customer Support - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 3
Use This Manual 2 Projector Highlights 4 Safety Instructions 6 Safety Symbols in this Manual 12 28 Preparing the Remote Control 35 Basic Guide 37 Installation Procedure 38 Setting Up the Test Patterns 197 Supported Signal Types 198 Specifications 202 Troubleshooting 208 LED Indicator - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 4
to equipment such as a Blu-ray player/recorder. 4K projection from multiple input terminals - two for HDMI and four for DVI - is also supported, using a multi-input feature. Peripheral Focus Adjustment Image focus can be adjusted on the edges of the screen, enabling use in dome projection. Edge - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 5
Connectivity (4K600STZ/4K600Z) In addition to wired LAN connectivity, the projector also supports Wi-Fi. In Projector Access Point (PJ AP) mode, the projector and lowers the speed of the cooling fan to reduce noise. Canon Service Tool for PJ (Canon ST) (4K600STZ/ 4K600Z) This iOS application is - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 6
, check operations and cable connections, and try the solutions in the "Troubleshooting" section in the back of this manual. If the problem still persists, contact the Canon Customer Support Center. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 7
Safety Instructions Safety Instructions Safety Precautions WARNING: • THIS APPARATUS MUST BE GROUNDED hazard. • Do not cover the ventilation slots on the projector. Heat build-up can reduce the service life of your projector, and can also be dangerous. • If the projector is unused for an extended - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 8
■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning. Do not - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 9
service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the projector. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally after following the operating instructions - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 10
Safety Instructions AC Power Cord Requirement The AC Power Cord supplied with this projector meets the please contact your local city office, waste authority, approved scheme or your household waste disposal service or visit www.canon-europe.com/weee, or www.canon-europe.com/battery. 10 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 11
. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 12
Safety Instructions Safety Symbols in this Manual This section describes the safety symbols used in this manual. Important projector safety information is identified by the following symbols. Always observe the safety information by these symbols. Denotes the risk of death or serious - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 13
Safety Instructions Safety Instructions Precautions for Use As this section contains important safety occur, turn the power off, remove the power plug from the power outlet and contact the Canon Customer Support Center. Failure to do so could cause a fire or result in an electric shock. • If smoke - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 14
Safety Instructions Pay attention to the following points regarding the power source, power plug and are hot. If inspection, maintenance or repair is required, contact the Canon Customer Support Center. • Do not disassemble or modify the projector (including consumable parts) or the remote control. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 15
Safety Instructions Safety Instructions Pay attention to the following points regarding installation and etc. • For ceiling mounting or other installation work, request service from a qualified technician or the Canon Customer Support Center. Poor installation work could result in an accident. 15 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 16
Safety Instructions Laser Light Source when damaged. Even if the projector is used as described in this manual, failure to discontinue use when it is damaged (as indicated by screen disposing of the projector, contact the Canon Customer Support Center. Do not disassemble the projector yourself when - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 17
Safety Instructions Safety Instructions 17 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 18
Safety Instructions Remote Control Batteries Pay attention to the following points regarding handling of batteries. Failing to do so could result in a fire or personal injury. • Do - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 19
Safety Instructions Safety Instructions Handling Pay attention to the following points regarding installation and handling of the projector. • If the projector will not be used for a long period of - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 20
For Safe Use Carrying and Installation Pay attention to the following points when carrying or transporting the projector. • This projector is a precision instrument. Do not knock it over or subject it to impacts. Doing so may cause a malfunction. • Retract the adjustable feet before moving the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 21
. • The projector is heavy and should not be carried alone. Have at least one assistant. Precautions for Installation Be sure to read "Safety Instructions" and "For Safe Use" (P6 - P20). Also take the following precautions during installation. • Do not strike the projector or subject it to impact - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 22
above 2,300 m (7,545.8'), Adjust the Settings Projector settings must be adjusted when using the projector at altitudes of 2,300 m (7,545.8') or higher. Specifically, refer to instructions for [High altitude] (P112) in the [Install settings] menu. 22 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 23
Before Installation Before Installation ■ When Using Mounted on the Ceiling When using the projector mounted on the ceiling or installed in a high location, clean around the air intake and exhaust vents periodically. Dust that accumulates in intake or exhaust vents may impair ventilation, raising - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 24
Before Installation ■ Precautions for Portrait (Upright) Installation • Do not block the air intake or exhaust vents. In particular, because there is an air intake vent on the bottom, always ensure a minimum clearance of 2 cm (0.8") from the bottom. • Note that no mounting brackets or similar - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 25
Before Installation Before Installation Copyright Notice Please note that enlarging or reducing the size of an image for commercial purposes or public presentation may infringe on the legally protected copyright or the copyright holder of the original material. Ensure Network Security Take measures - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 26
details, download the compressed archive file containing the User's manual from the Canon website. Extract the contents of the compressed THE POSSIBILITY OF SUCH DAMAGES. NO SUPPORT Canon Inc., and all its subsidiaries or its dealers do not make any support service regarding the source code. Canon - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 27
Before Use Before Use Included Accessories Before use, make sure the following items are included in the package. • Remote control (part No.: RS-RC05) • Batteries for the remote control (AA size x2) The remote control can also be used in a wired connection with the projector. (P36) • Power - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 28
Before Use Part Names Projector ■ Front Side Terminals and connectors (P32) Power cord connector (P52) LED indicators (P30) Air intake vent Air filter (P194) Do not block the air intake. Doing so may cause a malfunction. Anti-theft lock hole An anti-theft wire cable (not included) can be connected - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 29
Before Use ■ Bottom Air intake vent Before Use Side Control (1) (2) (3) (4) (5) (6) (7) (1) POWER button (P53, P71) Turns the projector on or off. (2) INPUT button (P56) Switches the input signal. (3) LENS button (P59) Each time the button is pressed, the adjustment window changes, from - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 30
light source is off in power management mode • WARNING (red) : Lights up or flashes when an error occurs. • LIGHT (orange) : Lights up or flashes when a problem occurs with the light source. • TEMP (red) : Lights up or flashes when the internal temperature is high. 30 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 31
Before Use Before Use ■ LED Indicator Displays Projector operating status is indicated by five LEDs, as shown in the following table. For details on warnings, see "LED Indicator Details" (P208). Example of when the POWER indicator is on; LED indicator POWER STAND BY WARNING LIGHT (green) ( - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 32
cable. (3) Digital PC / DVI-D terminal (DVI-D) (P45) Connects the external monitor output from a computer. Receives digital PC signal (Digital PC). (4) Service port (CONTROL) (P205) Used for executing user commands (P206 - P207). (5) LAN port (P136) Connects the LAN cable (shielded twisted pair - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 33
Before Use Remote Control (11) (1) (12) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) POWER button (P53, P71) Turns the projector on or off. (2) ASPECT button (P64, P94) Changes the aspect ratio mode. (3) Pointer buttons (P77) Selects the upper, lower, left or right item in the menu. Before Use (4) OK - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 34
Before Use (13) Change input buttons Change the input signal between Digital PC and HDMI. ANALOG 1, ANALOG 2 and COMPONENT are not used with this product. (14) MENU button (P76) Displays a menu on the screen. (15) EXIT button (P79) Cancels functions such as menu display or test pattern during - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 35
Before Use Before Use Preparing the Remote Control ■ Installing Remote Control Batteries 1 Open the battery compartment lid. Raise the battery cover tab while pushing it. 2 Insert batteries. Insert 2 new AA batteries in the compartment with the + and - terminals positioned correctly. 3 Close - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 36
Before Use ■ Remote Control Operating Range The remote control is an infrared type. Point it at the infrared remote receiver on the front or rear of the projector to operate it. 25° 25° 8 m (26.3') 8 m (26.3') 25° 25° • Use the remote control within an angle of 25° in any direction from directly - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 37
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 38
Installation Procedure Before setting up the projector, be sure to read "Before Installation" (P21). Setting Up the Projector ■ Positioning the Projector in Front of the Screen Place the projector in front of the screen. • To avoid keystone distortion, install the projector so that it is at right - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 39
Basic Guide Installation Procedure Installation Procedure ■ Installation on High Surfaces Using the lens shift function (P43), you can project images toward a lower level. When setting the projector - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 40
Installation Procedure Relationship between Image Size and Projecting Distance The projected image size is determined by the distance between the projector and screen (projection distance) and the zoom position. Refer to the following table and decide the distance between the projector and screen. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 41
Basic Guide Installation Procedure Installation Procedure Image Size (Dia.) 260 280 300 350 400 450 500 550 600 4096 x 2160 4096 x 2400 Image Size [cm (in)] Projection - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 42
Installation Procedure Image Size (Dia.) 200 220 240 260 280 300 350 400 450 500 550 600 4096 x 2160 4096 x 2400 Image Size [cm (in)] Projection distance [m (feet)] Image Size [cm (in)] Projection distance [m (feet)] Width Height Wide limit Tele limit Width Height Wide limit Tele - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 43
Basic Guide Installation Procedure Installation Procedure Lens Shift Function You can reposition the image in all directions by pressing the SHIFT button on the remote control, which moves the lens up, down, left, or right. For instructions, refer to "Adjusting the Image Position" (P62). ■ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 44
(43.3) 424 (166.9) 121 (47.6) 462 (181.9) 131 (52.6) • (A) values are the approximate vertical lens shift distance from the central image position within the supported lens shift range. • (B) values are the approximate horizontal lens shift distance from the central image position within the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 45
Basic Guide Connection Procedure Connection Procedure Before connecting the projector to other equipment, turn off both the projector and the other equipment. For instructions on connecting multiple sources of input for 4K projection, refer to "4K Projection" (P47). Connecting a Computer Computer - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 46
Connection Procedure Connecting AV Equipment AV equipment HDMI terminal Trigger terminal HDMI cable (not included) HDMI terminal AUDIO OUT terminal Audio cable (not included) Audio cable (not included) Audio cable (not included) Mini jack Screen or other product compatible with the trigger - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 47
Basic Guide Connection Procedure Connection Procedure 4K Projection ■ Definition of 4K Several resolutions up to the maximum 4K resolution of 4096 x 2400. For details, check the table of supported signals. (P198) ■ 4K Digital Signal Compatibility The projector is equipped with DVI-D and HDMI: - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 48
as computers to display devices such as projectors. HDCP specifications are established and managed by Digital Content Protection, LLC. *2 Use an HDMI cable supporting 18 Gbps. ■ Multi Input Mode • DVI-D Using four DVI-D dual-link cables, you can supply signals up to 4096 x 2400 (vertical frequency - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 49
Basic Guide Connection Procedure Connection Procedure • HDMI Using two HDMI cables, you Connect desktop computers by using two HDMI cables • Split-screen or four-quadrant projection is not supported when the projector is connected to multiple devices. • A single image cannot be projected by using - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 50
many specialized signals using four input terminals, for projection in a 2x2 layout. • [1x4] setting Supports many specialized signals using four input terminals, for projection side by side. For instructions on turning the projector on, see "Step 1 Turn the Projector On" (P53). 1 In the [Install - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 51
Basic Guide Connection Procedure Connection Procedure DVI input mode Specify the combination of DVI input. Choose from [Normal], [Single], [DVI 1x2], [DVI 2x2], or [DVI 1x4]. • To - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 52
Connection Procedure Plugging the Projector In Connect the power cord to the projector and plug it in. • Unplug the power cord when the projector is not in use for an extended period. • [Date and time settings] may be reset if the projector is left unplugged for an extended period. (P129) 52 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 53
Basic Guide Projection Procedure Projection Procedure Step 1 Turn the Projector On 1 Check the connection between the projector and the computer or AV equipment. (P45, P46) For instructions on connecting the power cord, refer to "Plugging the Projector In" (P52). 2 Press the POWER button. The [ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 54
Projection Procedure ■ When the Language Selection Screen Appears A screen appears when the projector is turned on for the first time. You can select a language to be used by the projector for displaying menus and messages in the window. Select the desired language with the pointer buttons and - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 55
Basic Guide Projection Procedure Projection Procedure Changing Notebook Computer Screen Output method used to turn on the external monitor output vary depending on the model. For details, see the manual for your notebook computer. • With Windows 10, Windows 8.1 or Windows 7, you can turn on image - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 56
Projection Procedure Step 2 Select an Input Signal Select the input signal in the [Input] menu when you want to project a digital PC or AV equipment signal, or to switch between inputs when multiple computers or multiple sets of AV equipment are connected. Skip this step if you have not changed - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 57
Basic Guide Projection Procedure Projection Procedure 3 Press the OK button to confirm the input signal type. For multiple input signals, the projection layout is divided as follows. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 58
Projection Procedure Step 3 Adjust the Image Setting the Display Resolution of the Computer Based on the maximum resolution of the projector, set the display resolution of the computer to the resolution closest to the output signal resolution of the projector. (P198) Maximum resolution • 4096 x 2160 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 59
button on the remote control or the LENS button on the projector to display the focus adjustment window. Remote control Projector Basic Guide Projection Procedure 2 Press the pointer buttons to adjust the focus. Remote control Projector To adjust the focus, use the [ ] / [ ] button on the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 60
Projection Procedure ■ Adjusting Image Size The size of the projected image can be adjusted by pressing the ZOOM button on the remote control or the LENS button on the projector. Change the projector installation position if your desired image is too large or too small to adjust it with the zoom - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 61
, use the [ ] button on the remote control or projector. 3 When the desired image size is selected, press the OK button or the ZOOM button. Basic Guide Projection Procedure 61 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 62
Projection Procedure ■ Adjusting the Image Position To adjust the screen position up, down, left, or right, press the SHIFT button on the remote control or the LENS button on the projector. It can change the projected screen to the most suitable position by moving the position of the lens up/down/ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 63
Basic Guide Projection Procedure 2 Press the pointer buttons to adjust. Remote control Projector Projection Procedure Screen To raise or lower the image, use the [ ] / [ ] buttons on the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 64
Projection Procedure Step 4 Select an Aspect Ratio (Screen Aspect) Matching the Screen Select an optimum screen mode (aspect) according to the aspect ratio of the screen, type of input image signal and so on for the projection to make best use of the screen size. Select the Aspect Select [Aspect] - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 65
Basic Guide Projection Procedure Projection Procedure Step 5 Adjusting Keystone Distortion To correct , and use corner adjustment to adjust the position of each corner of the image. For instructions on switching keystone adjustment, refer to "Keystone" (P108). • Keystone correction may not be - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 66
Projection Procedure 2 Press the pointer buttons to adjust the dimensions. Remote control Projector To correct top distortion, press the [ ] button. To correct bottom distortion, press the [ ] button. Screen To correct distortion on the left, press the [ ] button. To correct distortion on - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 67
Basic Guide Projection Procedure Projection Procedure 2 Press the pointer button of the corner for correction, and then press the OK button. Remote control Projector 3 Press the pointer - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 68
Projection Procedure Step 6 Select the Image Quality (Image Mode) You can select an image mode to suit the projected image. In each image mode, you can further adjust the brightness, contrast, sharpness, gamma, HDR range, color adjustment (P101), advanced adjustment (P101), light source mode (P105) - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 69
Basic Guide Projection Procedure Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 70
Projection Procedure ■ Switching the mode to the DICOM SIM Mode 1 Press the IMAGE button on the remote control until [DICOM SIM] is displayed or select [DICOM SIM] from [Image mode] in the [Image adjustment] menu. 2 Display test patterns by pressing the TEST PATTERN button on the remote control or - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 71
Basic Guide Projection Procedure Projection Procedure Step 7 Turn the Projector Off 1 Press the POWER button to display the window shown below. Remote control Projector 2 When this window - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 72
Convenient Features This section describes features convenient during presentations and in other situations. Temporarily Blacking Out an Image Projection can be temporarily blanked after a presentation, or to divert the audience's attention away from the screen. Remote control Press the BLANK button - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 73
Basic Guide Convenient Features Convenient Features Specifying Power-Saving Settings Set power-saving settings as needed. The following four settings are available. For details, refer to the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 74
74 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 75
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 76
Using Menus Use the menus to set the operation of the projector in detail. Menu Configuration The menu screen is divided into 6 tabs as shown below. [Input settings] tab (P93) You can set the type of signal or the method of projection of the images input. [Image adjustment] tab (P98) You can adjust - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 77
highlighted in orange, press the [ ] / [ ] buttons to move the current selection to the top. 3 Press the [ ] / [ ] buttons to select an item. Remote control Projector Advanced Guide Using Menus 77 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 78
Using Menus 4 Select contents. How to select the contents varies depending on the item. Selecting from a list Example: Aspect (P94) 1. Select [Aspect]. 2. Press the OK button or [ ] button to display a list of the contents. 3. Use the [ ] / [ ] buttons to select the desired contents. 4. When you - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 79
Advanced Guide Using Menus Using Menus Selecting from a different screen (2) Example: Random noise reduction (P102) 1. Select [Advanced adjustment]. 2. Press the OK button to display a different screen. 3. Select [ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 80
Menu Configuration Input settings (P93) Aspect Auto* P94 True size Input level HDMI P94 Auto* Normal Expanded Super white HDMI P94 Off On* Color space HDMI P95 Auto* RGB YCbCr Progressive HDMI P95 Off Film/auto* Video 1 Video 2 25p/30p(PsF) Input signal details Input - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 81
Advanced Guide Menu Configuration Menu Configuration Create profile (Displayed when [Image mode] is not [User 1] - [User 3]) User 1 User 2 User 3 Save profile (Displayed when [Image mode] is [User 1] [ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 82
Menu Configuration MPEG noise reduction Dynamic gamma Dynamic contrast Colorimetry (1) HDR Mem. color correct 6-axis color adjust Fine-Tune Gamma (2) Light source mode Brightness level (3) Reset Off* Weak Middle Strong Off*1 Weak Middle Strong Off* Mode 1 Mode 2 Mode 3 Auto* BT.709 BT.2020 Auto - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 83
Advanced Guide Menu Configuration Install settings (P107) Positional lock Off* On Image flip H/V * Adjust Registration Off* Adjust Advanced registration Off* Adjust 5-point adjustment Off* Adjust Manual adjustment Reset Menu Configuration P108 P108 P108 P109 P109 P110 P111 * Factory default, - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 84
Menu Configuration High altitude Operating mode Marginal focus Edge blending Lens - Position Screen color Iris Test pattern Off* On Normal* Fixed brightness Long duration 1 Long duration 2 Off* On Reset Off* Adjust Left Right Top Bottom Color blending adjustment Black level adjustment Marker Reset - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 85
Menu Configuration Screen when blank Projector on On screen Menu position Menu display time Menu rotation Guide Show input status Air filter warning display Overheat warning display Remote control/Side control Beep Key repeat Key lock Remote control channel Black* Blue Light - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 86
Menu Configuration Audio in terminal select DVI-1 DVI-2 DVI-3 DVI-4 HDMI-1 HDMI-2 DVI 1x2 DVI 2x2 / 1x4 HDMI 1x2 Serial communication Power supply settings Standby power setting Quick startup Power management mode Power management duration Direct power on P124 Off Audio in* Off Audio in* Off - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 87
schedule Reset Copy schedule to different day P126 P127 P128 P129 P129 P129 P130 * Factory default, or state after [Factory defaults] is executed. 87 Advanced Guide Menu Configuration - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 88
Menu Configuration Special period 1 Special period 2 Special period 3 Special period 4 Special period 5 Calibration Gamma restore Adjust panel temperature Light source calibration Trigger out Air filter counter Off* On Edit Period Day of week Edit schedule Reset Copy schedule to different day Off* - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 89
/ No OK / Cancel Menu Configuration P135 P135 Advanced Guide Menu Configuration Network settings (P136) Network settings lock Unlock On* Detailed IPv6 address settings Link local Auto Manual Gateway Auto settings Off* On Manual settings IP address Prefix length Gateway address Network setting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 90
address Subnet mask Gateway address DHCP Off* On TCP/IP settings IP address Subnet mask Gateway address Off* On Link local Auto Manual Gateway Auto settings Off On* Manual settings IP address Prefix length Gateway address Yes / No * Factory default, or state after [Factory defaults] is executed. 90 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 91
(wired) 4K600STZ/4K600Z Detailed information 4K601STZ/4K601Z IPv4 IPv6 Link local Auto Manual Detailed information (wireless) 4K600STZ/4K600Z IPv4 IPv6 Link local Auto Manual P152 P153 P153 P154 Advanced Guide Menu Configuration * Factory default, or state after [Factory defaults] is executed. 91 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 92
Menu Configuration The following settings are not reset even when factory defaults are restored. • Selected input signal • Image adjustment - Save profile - Baseline image mode - Light source mode - Brightness level • Install settings - Lens - Position • System settings - Registration - Advanced - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 93
and Mastering InfoFrame for HDMI signals. Menus that are not available are grayed out or hidden. Details P94 P94 P94 P95 P95 P96 P97 Advanced Guide Menu Settings 93 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 94
[Auto] mode, the signal level is selected automatically. (Some equipment may not support this.) • If the HDMI output of the connected equipment can be set to or [Expanded]. For more detailed information, refer to the user's manual for the equipment connected to the projector. Super white > [Input - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 95
video (25 or 30 fps, respectively). Select [Off] when flickers and horizontal lines are noticeable in media that has a lot of fast-moving action. Advanced Guide Menu Settings 95 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 96
Menu Settings Input signal details > [Input settings] > [Input signal details] Shows input signal details for each input terminal used, for the selected input signals. In Multi Input mode, terminals with incorrect input can be identified by a " " icon, which is displayed for input terminals with - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 97
area that includes color and luminance information, and this information is indicated. The following information is displayed. Advanced Guide Menu Settings Item EOTF Information Indicated Traditional gamma-SDR SMPTE ST 2084 Display primaries [0],[1],[2] x: 0.00002 - 1.00000 y: 0.00002 - 1.00000 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 98
Menu Settings Image adjustment This section describes image quality settings such as brightness, contrast, and sharpness. Menu screen when the input signal is HDMI-1 Menu Function Details Image mode * Select overall image quality to suit the projected image. P99 Create profile Save desired - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 99
], [Light source mode], and [Brightness level] • If flickering occurs when the image mode is set to [Presentation], try switching to [Photo/sRGB] or [Standard]. Advanced Guide Menu Settings 99 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 100
Menu Settings Create profile > [Image adjustment] > [Create profile] Save desired image quality settings in up to 3 user profiles. • The saved settings are [Brightness], [Contrast], [Sharpness], [Gamma], [HDR range], [Color adjustment], [Advanced adjustment], [Light source mode], and [Brightness - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 101
film (Clear base). Preset 5: Reproduce colors of X-ray film (Blue base). Advanced adjustment > [Image adjustment] > [Advanced adjustment] Fine-tune noise reduction and color tone. Advanced Guide Menu Settings 101 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 102
Menu Settings Ambient light Minimize the effect of ambient light on the screen. Submenu Function Off No correction is performed. Adjust Type Tungsten Fluorescent For ambient light from conventional light bulbs or fluorescent light of this color. For ambient light from a "day white" - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 103
are supplied. Off Prevent use of HDR. On Require use of HDR. [HDR] can only be set when the image mode (P99) is [Video]. Advanced Guide Menu Settings 103 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 104
Menu Settings Mem. color correct (Flesh/Sky/Green) Enhances skin tones, blue skies, and greens, so that these colors are more consistent with people's remembered impressions. Option Function Off Disable correction. Weak Middle Specify the level of correction. Strong Image resolution may - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 105
separately. Adjustments to white are also applied to the three other colors. Note that adjusting any color will overwrite previous adjustments. Advanced Guide Menu Settings Use the [ ] / [ ] buttons to select a color, and then press the OK button. Next, use the [ ] / [ ] buttons to select an - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 106
Menu Settings Brightness level > [Image adjustment] > [Brightness level] Control the laser diode to adjust the projection brightness. Use the [ ] / [ ] buttons to adjust the brightness. [Brightness level] appears instead of [Light source mode] when the operating mode (P112) is not set to [Normal]. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 107
Menu Settings Install settings Adjust projection to suit the screen or the type of images, or how the projector is installed. Advanced Guide Menu Settings Menu screen when the input signal is HDMI-1 Menu Function Positional lock Operation of installation related functions can be prohibited. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 108
the projector on a ceiling, use the optional ceiling attachment (RSCL15) and ceiling-mount arm (RS-CL17). Contact the Canon Customer Support Center for more detailed information. • Image flipping will reset any adjustment for keystone distortion. In this case, redo the adjustment. • Adjusting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 109
Professional settings > [Install settings] > [Professional settings] Specify advanced installation settings. Menu Settings Advanced Guide Menu Settings Panel drive mode Select the LCD panel vertical resolution to use. Option Function 4096x2160 Use a resolution of 4096 x 2160 lines. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 110
because the EDID is not read correctly by connected equipment when set to Wide bandwidth (4K60Hz). Even if this function is used, the list of supported video formats may not be updated when [HDMI input mode] in [Multi input mode select] is set to [HDMI 1x2]. 110 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 111
the screen is possible by color and area. For detailed instructions, refer to "Advanced Registration to Adjust Projected Images" misalignment. Advanced registration Submenu 5-point adjustment Manual adjustment Reset Function Off Disable adjustment. artifacts. Advanced Guide Menu Settings 111 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 112
. • Any values you set in 5-point adjustment are retained if you subsequently perform manual adjustment. For more precise correction after 5-point adjustment, perform manual adjustment. • Any manual adjustment values you set before switching to 5-point adjustment are cleared. High altitude Switch - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 113
remote control can be used to activate and deactivate this focus adjustment. For detailed instructions, refer to "Adjusting Peripheral Focus" (P191). Option Function Off Disable remote focusing fine-tuning gamma (4) Corner adjustment, using keystone correction Advanced Guide Menu Settings 113 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 114
Menu Settings Submenu Side Function Submenu Left Right Top Bottom Width Function Select the direction of the blending area to adjust. Specify the width between the start and end markers. Moves the position of the start marker. Start position • Large blending areas may cover input signal dialog - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 115
Advanced Guide Menu Settings Submenu Black level adjustment Marker Reset Menu Settings Function Because black is lighter in the blending area than in other areas, you can - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 116
Menu Settings Lens - Position > [Install settings] > [Lens - Position] The projector can store information about the lens position. Up to three sets of lens information (including, focus, zoom, and lens shift settings) can be saved, and the lens can be restored to these positions as needed. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 117
with the [ ] / [ ] buttons. • The test pattern menu is no longer displayed after a little while, but you can view it again by pressing the [ ] / [ ] buttons. Advanced Guide Menu Settings 117 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 118
Menu Settings System settings Customize projector and remote control operation, beeping, and other details after startup, during standby, and in other situations. Menu screen when the input signal is HDMI-1 Menu Function User screen settings Customize user screens shown at startup, when no - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 119
User screen settings > [System settings] > [User screen settings] Capture a logo and specify logo display settings. Menu Settings Advanced Guide Menu Settings Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 120
(P64) - Image mode (P68) - Gamma (P100) - Volume adjustment (P29, P34) [Normal] [Extended] 30 seconds 3 minutes 10 seconds 3 minutes The windows for manual adjustment or 5-point adjustment in RGB alignment, and for other settings such as date and time settings, are shown for 3 minutes, regardless - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 121
As you use the projector, messages are shown as guidance to introduce features and operation. Option Function Off Hides the guide screen. On Shows the guide screen. The guide screen is shown at the following cases. • No input signal is detected. • An invalid button is pressed in [BLANK] or - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 122
Menu Settings Overheat warning display Shows a warning icon when the internal temperature is high and the projector may overheat. Option Function Off Disable high temperature warning icon display. On Enable high temperature warning icon display. Remote control/Side control > [System - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 123
and [3] button for 3 seconds. Hold down both the Ch button and [4] button for 3 seconds. Hold down both the Ch button and [0] button for 3 seconds. Advanced Guide Menu Settings 123 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 124
[HDMI 1x2]. Audio signals from HDMI-2 are output. Serial communication > [System settings] > [Serial communication] You can check setting values for the service port (CONTROL) used for serial communication. Option Baud rate Data bits Parity Function Modulation rate, in bits per second. Number of - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 125
standby, restoring projection requires the same steps as when turning the projector on normally. • When [Disabled] is selected, [Direct power on] is not available. Advanced Guide Menu Settings 125 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 126
Menu Settings Power management duration Specify how much time must pass before the light source goes off or the projector enters standby mode, depending on the [Power management mode] setting. Option Function 5 min. - 60 min. After 30 seconds without an input signal when the projector is idle, - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 127
Russian German Dutch French Finnish Italian Norwegian Spanish Turkish Portuguese Polish Swedish Hungarian Menu Settings Czech Danish Arabic Chinese (Simplified) Chinese (Traditional) Korean Japanese Advanced Guide Menu Settings 127 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 128
Menu Settings Other settings > [System settings] > [Other settings] Register a password, set a password, reset the air filter counter, schedule operation, and access other settings and information. Password settings Disables the projector unless the correct password is entered. Option Function - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 129
Advanced Guide Menu Settings Menu Settings Register password You can register a password for starting projection. Enter a 4 digit password. Enter the password using the pointer buttons [ ] (1) / [ ] (2) / [ ] (3) / [ ] (4) or the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 130
Menu Settings Submenu Function Select whether to sync the time on the projector using SNTP (Simple Network Time Protocol). Submenu On (IPv4) On (IPv6) Off Function Use SNTP over an IPv4 connection. Use SNTP over an IPv6 connection. Disable SNTP. SNTP • [SNTP] is not available when [Network ( - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 131
Detailed schedule setting Menu Settings Option Off On Disable the schedule. Enable the schedule. Edit the schedule. ■ Default Function Edit Advanced Guide Menu Settings 131 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 132
Menu Settings Option ■ Special period Function Select a day in [Day of week], and select the times, operations, and parameters. Light source calibration can also be scheduled during your specified period, by selecting CALIBRATION. (For details, see page 133.) However, the projector must - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 133
screen will be projected for approximately 8 minutes. • To stop Gamma restore, press the POWER or EXIT button. Cancellation will return the setting to [Off]. Advanced Guide Menu Settings 133 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 134
Menu Settings Submenu Adjust panel temperature Light source calibration Function Used when the gamma has changed in response to other changes, such as changes in ambient temperature. Compensates for changes in gradation caused by a change in LCOS panel temperature. This function can only be used - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 135
Insert the USB flash drive in the USB port. 3. Follow the instructions shown to complete the update process. • Firmware versions shown here to download updates. For details, contact the Canon Customer Support Center. • Firmware updating takes a few minutes. During the Guide Menu Settings 135 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 136
be necessary. The following is an explanation of preparation on the computer side. Connection Methods 4K600STZ/4K600Z support both wired and wireless connections, and 4K601STZ/ 4K601Z support wired connections. Wired Networks To connect the projector to a computer network, use a LAN cable. Hub or - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 137
be used as an access point for direct communication with wireless LAN-compatible computers. Up to five computers can be connected at once. Advanced Guide Menu Settings Projector (in PJ AP mode) Wireless LAN-compatible computers • The following network features are available in PJ AP mode. - Web - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 138
wired or wireless IP address is not the same as that of other computers on the network. To set a projector IP address, follow the instructions in "Completing Computer Settings for a Network Connection" (P157) and use the web screen, or use projector TCP/IP settings. (P144, P149) • Before connecting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 139
Advanced Guide Menu Settings Menu Settings Wireless LAN (Wi-Fi) ■ Countries and countries and regions where use of the wireless LAN function permitted. Canon assumes no responsibility whatsoever for problems, etc., that may arise from use of the wireless LAN function in countries and regions other - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 140
Menu Settings Completing Projector Settings Settings described in this section apply to wired and wireless (4K600STZ/ 4K600Z) network connections, setting a network password, and other aspects of networked projection. Menu screen for 4K600STZ, when the input signal is HDMI-1 Menu Function - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 141
. Register network password > [Network settings] > [Register network password] Use the buttons or number buttons on the remote control to enter the projector network password. Advanced Guide Menu Settings 141 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 142
wired) (4K600STZ/4K600Z) > [Network settings] > [Detailed settings (wired)] Detailed settings (4K601STZ/4K601Z) > [Network settings] > [Detailed settings] Display and manually change the wired IP address, gateway address, and other settings. Available only when wired networking is [On]. Menu screen - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 143
the wired LAN (IPv4). Gateway address of the wired LAN (IPv4). DHCP Option Function Off Disables the DHCP function. TCP/IP settings can be configured manually. Enables the DHCP function. Searches the DHCP server. It will no longer be On possible to enter TCP/IP - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 144
Menu Settings Menu Function Submenu Function Change or specify the IP address, subnet mask, and gateway address used for connections. Detailed IPv4 address settings TCP/IP settings Menu screen for 4K600STZ/4K600Z (For 4K601STZ/4K601Z, "(wired)" is not shown in the menu title.) • This menu is - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 145
of the projector's wired LAN (IPv6) function. Advanced Guide Menu Settings Detailed IPv6 address settings Menu screen for 4K600STZ/4K600Z (For 4K601STZ/4K601Z, "(wired)" is not shown in the menu title.) Submenu Link local Auto Manual Gateway Auto settings Function Link-local address of the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 146
(wired LAN (IPv4)) (P143) - Gateway address (wired LAN (IPv4)) (P143) - IPv6 (P144) - Detailed IPv6 address settings (P145) - Auto settings (P145) - Manual settings (P145) - IP address (wired LAN (IPv6)) (P145) - Prefix length (P145) - Gateway address (wired LAN (IPv6)) (P145) • PJLink (P152) • AMX - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 147
manually change the wireless IP address, gateway address, and other settings. Available only when wireless networking is [On]. Advanced Guide , select [OK] on the screen. Connect in PIN mode. Following the instructions shown, enter the displayed 8-digit PIN code on the wireless base station (access - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 148
) A list of available access point SSIDs is displayed. You can find available access points nearby or use the keyboard to enter an access point SSID. Manual settings SSID Security Channel Key ID Key type Key Apply Select the wireless security from [Open], [WEP], [WPA2 AES], or [WPA/WPA2 TKIP/AES - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 149
function. Searches the DHCP server. It will no longer be possible to enter TCP/IP manual settings (IP address, subnet mask, and gateway address), because the IP address is acquired from is entered, "Invalid entry." is displayed. In this case, enter a valid value. Advanced Guide Menu Settings 149 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 150
settings] menus are grayed out. Configure details of the projector's wireless LAN (IPv6) function. Detailed IPv6 address settings Submenu Link local Auto Manual Gateway Auto settings Function Link-local address of the wireless LAN (IPv6). Automatic addresses (up to 5) of the wireless LAN (IPv6 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 151
P149) - IPv6 (P150) - Detailed IPv6 address settings (P150) - Auto settings (P150) - Manual settings (P150) - IP address (wireless LAN (IPv6)) (P150) - Prefix length (P150) - - Prefix length (P173) - Default gateway (P173) • [Mail] (P174) • [Projector info.] (P177) Advanced Guide Menu Settings 151 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 152
to Class 1 as defined in PJLink standards established by the Japan Business Machine and Information System Industries Association (JBMIA). This projector supports all commands that are defined by PJLink Class 1, and has been verified as conforming to the PJLink standard Class 1 definition. • For - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 153
management of multiple projectors over a network. Networked projectors can be remotely controlled to troubleshoot issues, or turn the projectors on or off. Specify whether to use Crestron on Crestron RoomView, visit the Crestron® website. http://www.crestron.com Advanced Guide Menu Settings 153 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 154
wired LAN (IPv4). Link local Link-local IP address of the wired LAN (IPv6). Auto Automatic IP address of the wired LAN (IPv6). Manual Manual IP address of the wired LAN (IPv6). Detailed information (wireless) 4K600STZ/4K600Z IPv4 IPv6 IP address of the wireless LAN (IPv4). Link local Link - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 155
Menu Settings Checking Projector Information You can check information about the signal types of the images projected and other information. Advanced Guide Menu Settings Menu screen for 4K600STZ/4K600Z Menu Information Model name Shows the model name. Input signal Details of the input signal - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 156
Menu Settings Availability of Information Some information may not be displayed, depending on whether wired or wireless functions are enabled or disabled. ( : displayed, -: not displayed) 4K600STZ/4K600Z Network (wired/wireless) IP address (wired) IP address (wireless) Projector name Comments Off - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 157
on a Network Completing Computer Settings for a Network Connection Specifying an IP Address Instructions for setting a computer's IP address (for wired connections or wireless connections) are button in the [Ethernet Properties] window to close it. 157 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 158
Using the Projector on a Network ■ Windows 8.1 1 Click the down arrow in the lower left of the start screen. 2 Click [Control Panel]. • From the Desktop: Press Win+X. In the shortcut menu displayed in the lower left, click [Control Panel]. 3 Click [View network status and tasks]. • In Icon View: - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 159
procedure as for changing the IP address and reset the values to the original values based on the notes taken before the change. 159 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 160
Using the Projector on a Network Setting Up the Network 4K600STZ screenshots are used in these instructions. ■ Displaying the Network Configuration Screen 1 Turn on the computer and projector. Network functions are not available for the first 40 seconds after projector startup. 2 Launch a - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 161
. To control the projector from the computer, click [Projector control]. (P181) ■ Network Setting 1 Select a function to set up from the settings screen menu. 161 Advanced Guide Using the Projector on a Network - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 162
Using the Projector on a Network 2 Enter setting details in the fields shown (1), and then click [OK] (2). (1) (2) 3 A confirmation window appears. Check the contents and if they are correct, click [Apply]. 162 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 163
you select functions other than above, "Save completed" is displayed. Click [Back to top] to return to the top page of the web screen. Advanced Guide Using the Projector on a Network Setting a Password [Password] From [Password] in the settings screen, you can set a user name and password for web - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 164
Using the Projector on a Network Setting the Date and Time [Date and time settings] From [Date and time settings] in the settings screen, you can set time settings such as the current date and time, date/time display format, time zone, and daylight saving time. For the setting procedure, refer to " - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 165
. Finish point Time Enter the ending time for daylight saving time in 1-byte numbers, in the range 00:00 to 23:59. 00:00 Advanced Guide Using the Projector on a Network 165 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 166
Using the Projector on a Network Setting a Scheduling [Schedule] From [Schedule] in the settings screen, you can automate some projector tasks by scheduling them. As the timing of scheduled operation, choose from [Usually], which is not during a certain period, or one of five special period times ( - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 167
) Clicking an item in [Time Schedule] displays the [Edit schedule] screen, enabling you to edit the schedule of the selected day or time. Advanced Guide Using the Projector on a Network 167 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 168
Using the Projector on a Network Edit schedule Item Day Time Operation Parameter Explanation Shows the day of the week for the selected schedule. Enter the automatic execution time in 1-byte numbers, in the range 00:00 to 23:59. As the operation for automatic execution, choose [Power], [Input], - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 169
displays the [Schedule copy] screen, enabling you to copy a schedule to any day for the selected usual schedule or period schedule. Advanced Guide Using the Projector on a Network Schedule copy Item Copy origin Registration Events Copy to day Explanation Factory default setting Select the day - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 170
the projector's wired MAC address. Select whether to turn the DHCP function on or off for wired LAN (IPv4). The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the DHCP server. [IP address] [Subnet mask] [Default gateway] Enter the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 171
reconnect to the network. If the network subnet mask was changed, select [Subnet mask] in the above screen and set the new subnet mask. Advanced Guide Using the Projector on a Network 171 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 172
's wireless MAC address. Select whether to turn the DHCP function on or off for wireless LAN (IPv4). The following settings cannot be configured manually when this setting is [ON], because the IP address is acquired from the DHCP server. [IP address] [Subnet mask] [Default gateway] Enter the - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 173
Fi Protected Setup Select a simple method of establishing a wireless connection. None (Manual) Mode Select the wireless connection mode. infrastructure mode Select SSID Select the Select the wireless security key input type. ASCII Advanced Guide Using the Projector on a Network 173 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 174
Using the Projector on a Network Wireless setting Item Key Explanation Enter the wireless security key. Factory default setting • If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to the network. If the network subnet mask was changed, select [ - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 175
authentication timeout period after POP3 authentication (unit: milliseconds) using 1-byte numbers (0 - 9999 milliseconds). Factory default setting OFF 0.0.0.0 110 110 300 Advanced Guide Using the Projector on a Network 175 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 176
Using the Projector on a Network Sending a Test Mail You can send a test mail to the mail address specified in [Mail] under [Mail] in the settings screen by clicking [Send test mail] at the bottom of the screen. SNMP Settings [SNMP] From [SNMP] in the settings screen, you can configure the settings - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 177
for projector management on a network. For the setting procedure, refer to "Network Setting" (P161). For information about PJLink, refer to "What is PJLink?" (P152). Advanced Guide Using the Projector on a Network 177 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 178
Using the Projector on a Network Item PJLink PJLink authentication Password Confirm password Explanation Turn the PJLink function on or off. If OFF is selected, the other settings in this screen cannot be configured. Select whether to turn the PJLink authentication function on or off. If OFF is - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 179
attempting to send a test mail. An authentication type was set which is not supported by the server. Authentication failed attempting to send a test mail. Sending of test Initialize network settings]. 3 A confirmation window appears. Click [OK]. Advanced Guide Using the Projector on a Network 179 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 180
name Text Temperature abnormality The internal temperature of the projector is abnormally high, or else the ambient air temperature exceeds the threshold. If the problem is with the projector, verify that it is properly installed and is being used correctly, and let the inside of the projector cool - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 181
. To enhance security, it is highly recommended that you change the user name and password. (P163) The projector control screen appears. Advanced Guide Using the Projector on a Network The projector can be controlled from this screen. Item Projector name Comment Refresh Power Input Aspect Image - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 182
Using the Projector on a Network Item Mute Information Explanation Switches the mute setting on or off. (P34) Shows the results of control, or control error information, at the top of the screen. 5 When the operations are finished, click [Back to top] to return the initial web screen. 182 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 183
can be adjusted to make them blend in better. ■ Basic Instructions Follow these steps when using two projectors side by side. 1 . Values indicated for this blending area are adjusted to match manually entered blending area values. Shading is applied to this area, Advanced Guide Advanced Projection - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 184
toward the center of the image) is called area "D." Normally, three areas are identified in the context of end markers: A, B, and C. In the following instructions, only area D is adjusted, and the widths of A, B, and C are left at the default value of 0. To prepare for adjustment, set [No signal - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 185
brightness and colors of the blending area and area D match. Advanced Guide Advanced Projection Adjust [D-area base] to lighten the black level, and and C must be adjusted to suit these blending areas. In this example, instructions are given for adjusting area B. 1 In the [Install settings] menu, - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 186
Advanced Projection 3 Select [B-width], and then specify the width of area B. Adjust the width of area B so that it roughly matches the area where the black level of area B stands out. This will make the width of area D narrower. 4 Select [Adjustment type] > [Black level]. Adjust [B-area base] as - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 187
available: 5-point adjustment (using points in the corners and center of the screen) and more precise manual adjustment based on 54 points (in a 6 x 9 grid). Any values you set in 5-point adjustment image areas may be affected by uneven colors or image artifacts. 187 Advanced Guide Advanced Projection - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 188
Advanced Projection 2 Use the buttons to select the point for correction, and then press the OK button. The projector enters color selection mode. Press the MENU button to return to [Advanced registration]. 3 Select [Red] or [Blue] as the color, and then press the OK button. • Each time you select - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 189
Professional settings] > [RGB alignment] > [Advanced registration] > [Adjust] > [Manual adjustment]. The projector enters manual adjustment mode, and a chart is displayed. • Charts (point selection windows) of MENU button to return to [Advanced registration]. 189 Advanced Guide Advanced Projection - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 190
OK button. • Each time you select [Chart] and press the OK button, display switches between the chart and the source signal. • Accessing the manual adjustment window during test pattern projection will show the test pattern instead of your supplied signal. 4 Use the buttons to align the adjustment - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 191
to display the marginal focus adjustment window. Projector Press twice. When [Marginal focus] is set to [On]. When [Marginal focus] is set to [Off]. Advanced Guide Advanced Projection 191 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 192
Advanced Projection 2 Press the pointer buttons to adjust the focus at image edges. Remote control Projector Press the buttons to adjust peripheral focus. 3 Once image edges are in focus, press the OK or FOCUS button. ■ Resetting Adjustment Clears the values set in marginal focus adjustment. In - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 193
Advanced Guide Basic Guide Safety Instructions Before Use Installation Procedure Connection Procedure Projection Procedure Convenient Features Using Menus Menu Configuration Menu Settings Using the Projector on a Network Advanced Projection Maintenance Product Specifications Troubleshooting - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 194
Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. Do not use adhesives, lubricants, oils, or alkaline detergents for maintenance of the projector. Before cleaning the projector, - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 195
Follow the procedure below when replacing the air filter. 1 Turn off the projector power and remove the power plug. 2 Pull out the filter cover by gripping the two tabs at the bottom and lifting. Maintenance 3 Open the filter cover and remove it. 4 Grasp the air filter by the handles and remove - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 196
air filter carefully. If damaged, the air filter will not work properly. • To purchase a replacement air filter (part no: RS-FL04), contact the Canon Customer Support Center. 196 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 197
Product Specifications Displayed Test Patterns To access the test pattern menu, from the [Install settings] menu, select [Test pattern] (P117) > [On], or press the TEST PATTERN button on the remote control. While the test pattern is displayed, you can use the [ ] / [ ] buttons to switch patterns. - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 198
Product Specifications Supported Signal Types The projector automatically projects input signals correctly from computers or AV equipment compatible with any of these signals. HDMI (single) 1 Signal resolution 640x480 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 199
in the EDID. No information is provided in the EDID for fields that are blank, so the computer output format must be configured manually. HDMI 1x2 1 2 FP : Front porch SW : Sync width BP : Back porch Combined multi input resolution Resolution at each input terminal Horizontal frequency [kHz - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 200
in the EDID. No information is provided in the EDID for fields that are blank, so the computer output format must be configured manually. DVI 1x2 1 3 FP : Front porch SW : Sync width BP : Back porch Combined multi input resolution Resolution at each input terminal Horizontal frequency [kHz - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 201
for fields that are blank, so the computer output format must be configured manually. Active video Blanking interval FP SW BP Active video Video signal Sync signal set to [4096x2160]. *3 Only YCbCr 4:2:0 is supported when [HDMI-1(2) EDID] is set to [9Gbps]. (RGB, YCbCr 4:4:4, and YCbCr 4:2:2 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 202
(*1)(*3)(*7) 4000:1 (Fully white:fully black, native) Ratio of brightness at periphery to center(*1) 80% Speaker 5W, monaural Supported input signals See "Supported Signal Types" (P198 - P201). Computer signal input Maximum input resolution: 4096 x 2400 Video signal input Maximum input - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 203
Product Specifications Model name 4K600STZ/4K601STZ/4K600Z/4K601Z DVI (single) 640 x 480, 800 x 600, 1280 x 720, 1024 x 768, 1366 x 768, 1440 x 900, 1280 x 1024, 1920 x 1080, 2048 x 1080, 2560 x 1080, 1920 x 1200, 2048 x 1200, 2560 x 1440, 3840 x 2160(*4), 4096 x 2160(*4)(*5) DVI input DVI (1 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 204
mode, with motion blur reduction set to [Off] and the light source mode set to [Normal]. (*4) Only low frequencies (24-30 Hz) supported (*5) EDID not supported (*6) When [Panel drive mode] is set to [4096x2400]. (*7) When [Close 3] is selected in [Iris]. (*8) 4K600STZ/4K600Z only * 99.99% or more - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 205
/4K601Z Product Specifications 201 mm (7.9") 90 mm (3.5") 177 mm (7.0") 133 mm (5.2") 605 mm (23.8") 559 mm (22.0") 624 mm (24.6") ■ Service Port (CONTROL) Pin assignment Pin No. Signal 1 OPEN 2 RxD 3 TxD 4 OPEN 5 GND 6 OPEN 7 Internal pull-up 8 OPEN 9 OPEN Communication format - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 206
Product Specifications Main user commands Commands Power on Power supply Power off Power status acquisition HDMI-1 HDMI-2 HDMI 1x2 DVI-1 DVI-2 Input source DVI-3 DVI-4 DVI 1x2 DVI 2x2 DVI 1x4 Input source acquisition Standard Presentation Photo/sRGB DICOM SIM Image Mode Dynamic Video User 1 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 207
Product Specifications Commands Brightness acquisition Sharpness Sharpness value setting ASCII representation GET=BRI SHARP= Sharpness acquisition GET=SHARP Contrast Contrast value setting CONT= Contrast acquisition GET=CONT Aspect Auto True size - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 208
Troubleshooting LED Indicator Details When there is a problem with the projector, the LED indicator on the side of the projector illuminates or flashes continuously a malfunction in the projector. Unplug the projector from the electrical outlet.* * Contact the Canon Customer Support Center. 208 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 209
device. Remove any obstacle that is blocking the air intake or exhaust vent and contact the Canon Customer Support Center. Check whether the air filter is installed correctly. (P194) Check that Key lock (P122) selected input signal type is correct. (P56, P198) Other Information Troubleshooting 209 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 210
Troubleshooting Cause The BLANK function has been selected. No image is projected due to a problem with the computer. The depending on the model of notebook computer. For more detailed information, refer to the manual that came with your computer. Check whether the dual screen (multi-display) mode - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 211
Troubleshooting ■ The Projected Image Is Blurred Cause The image is out of focus. The distance to the screen is too short. The projector drops, then make sure that the intake and exhaust vents (P28) are not blocked and turn on the projector. (P53) Other Information Troubleshooting 211 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 212
Troubleshooting at least 40 seconds, and then try to connect again. (P160) Follow the instructions in "Network Setting" (P161 - P162), "Wireless LAN (Wi-Fi)" (P139 If connection is still not possible, contact the Canon Customer Support Center. ■ You Cannot Operate the Remote Control Cause Batteries - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 213
Troubleshooting Cause You are operating the remote control in an unsuitable operating environment. The channel setting of the remote control is enabled to disable the remote control operation. In the [System settings] menu, set [Key lock] to [Off]. (P122) Other Information Troubleshooting 213 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 214
Index Numerics G 6-axis color adjust 104 Gamma 100 A Adjusting keystone distortion 65 Air filter 28, 194 Ambient light 102 AMX Device Discovery 153 ASPECT 64 Aspect 64 AUDIO IN terminal 32 AUDIO OUT terminal 32 Auto (Aspect 64 B BLANK 72 Brightness 100 C Ceiling mounted 39, 108 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 215
Index O OK 29, 33 Optical zoom 60 Wired Networks 142 Wireless Networks .......... 137, 142, 147 P Password 128, 129 PJLink 152, 177 POWER 53, 71 Projecting from Multiple Projectors at Once (Edge Blending 183 Projector on 119 R Rear projection 39, 108 Remote control 33, 34, 35, 123 - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 216
Option • Ceiling attachment Part No.: RS-CL15*1 • Ceiling-mount arm Part No.: RS-CL17*1 • Ceiling-mount pipe (400 - 600 mm / 15.7 - 23.6 in) Part No.: RS-CL08*2 • Ceiling-mount pipe (600 - 1000 mm / 23.6 - 39.4 in) Part No.: RS-CL09*2 • Air filter Part No.: RS-FL04 • Remote control Part No.: RS- - Canon REALiS LCOS 4K600STZ | 4K600STZ 4K601STZ 4K600Z 4K601Z Users Manual - Page 217
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON U.S.A. INC. One Canon Park, Melville, New York 11747, U.S.A. For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANON EUROPE LTD. 3 The Square, Stockley Park, Uxbridge, Middlesex, UB11 1ET
MULTIMEDIA PROJECTOR
User’s Manual
Safety Instructions
Before Use
Basic Guide
Installation Procedure
Connection Procedure
Projection Procedure
Convenient Features
Advanced Guide
Using Menus
Menu Configuration
Menu Settings
Using the Projector on a
Network
Advanced Projection
Other Information
Maintenance
Product Specifications
Troubleshooting
ENG